Automotive Engineering Commons^™

Universal Studios Hollywood Vip Trolley - Roller Frame, Jeffrey Ploss, Chase Montague, Lincoln Treanor

Mechanical Engineering

Statement of Confidentiality: The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Vehicle Pseudonym Association Attack Model, Pierson Yieh

Master's Theses

With recent advances in technology, Vehicular Ad-hoc Networks (VANETs) have grown in application. One of these areas of application is Vehicle Safety Communication (VSC) technology. VSC technology allows for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications that enhance vehicle safety and driving experience. However, these newly developing technologies bring with them a concern for the vehicular privacy of drivers. Vehicles already employ the use of pseudonyms, unique identifiers used with signal messages for a limited period of time, to prevent long term tracking. But can attackers still attack vehicular privacy even when vehicles employ a pseudonym change strategy? The major contribution …

Soft Target For Advanced Emergency Braking System Daimler Trucks, Kurt C. Ebert, Kolter Knapp, Esgar Pulido

Mechanical Engineering

This report provides an overview of the AEBS Soft Target project delivered to Daimler Trucks North Amer- ica as part of the 2016-2017 Mechanical Engineering Senior Design class at California Polytechnic State University, San Luis Obispo. The purpose was to build a soft target to test Advanced Emergency Braking Systems, or AEBS, on Daimler 0 s large trucks. Though this design is for Daimler specifically, there may be other interested parties such as highway safety groups and rival auto manufacturers. Currently, there are no suitable alternative products that satisfy every requirement for Daimler to validate their systems. They require a …

Sae Small Vehicle Lifts, Augustus G. Holz, Nathan K. Harry, Tobias W. Shirts

Mechanical Engineering

The SAE (Society for Automotive Engineers) vehicle teams at Cal Poly need an easy way to access the undersides of their vehicles to facilitate maintenance and servicing. The purpose of this project was to provide a solution that could lift the vehicles effectively and safely from above so that the underside of the vehicles can be accessed, as well as elevating the vehicles to an ergonomic working height. Design specifications were determined based off each vehicle’s requirements in addition to what the team intends to do with their suspended vehicle. After several concept iterations, the team decided to purchase an …

Guided Target Control System Final Design Report, John Barry, Zachary Eagan, Ryan Mackintosh

Mechanical Engineering

Daimler Automotive, the parent company of Mercedes-benz requires improved methods for testing their Autonomous Emergency Braking Systems. To this end they have presented a series of four senior projects to California Polytechnic State University in San Luis Obispo. One of the Projects is to build a facsimile of a human crossing the street. The other three projects of which this is a part; are to produce an autonomous car facsimile. These projects are intended for use in testing new Autonomous Emergency Braking Systems and may serve as the basis for future senior projects.

Small-Scale Intelligent Vehicle Design Platform, Christopher Grant, Jay Miley, Evan Phillips

Mechanical Engineering

Intelligent Vehicle Design is a growing field with the potential to save many lives by actively minimizing the impacts of human error. Though there are many ways to research intelligent vehicle control, full-scale implementations are expensive and dangerous and computer simulations have extremely steep learning curves. Researchers and students need an accessible, adaptable, and robust development platform to rapidly create and test autonomous control algorithms. While small-scale platforms are often designed from the ground up for specific projects, this requires analysis, design, and manufacture. The goal of this project is to develop a small-scale intelligent vehicle that can be configured …

Electric Vehicle Drivetrain, Jimmy Andrew King, Kevin Kristopher Moore, Charissa Cadence Seid

Mechanical Engineering

This document serves to outline the design and development of Sharpell Technologies' ST5 electric vehicle drivetrain. Background research was conducted on various drivetrain components and testing methods, leading to the development of our drivetrain’s design requirements. Compiled in this report are the specifications of the components that will be integrated into our drivetrain design. All component calculations and specifications can be located in the appendices. An in-depth manufacturing plan features the modifications necessary to create several key components such as the shafts and housing. The assembly plan details a step-by-step process in which the components are arranged to ensure a …

Carbon Fiber Monocoque Chassis Platform For Formula Sae And Formula Sae Electric Race Cars, Ford Eimon, Michael Gonzalez, Michal Kramarz, Nathan Powell, Kevin Ziemann

Mechanical Engineering

No abstract provided.

Formula Sae Power Distribution Controller, Daniel Baron

Electrical Engineering

The Power Distribution Controller senior project aims to replace the current Power Distribution Module (PDM) on Cal Poly’s Formula SAE internal combustion vehicle with a more advanced, configurable, and reliable system. The Power Distribution Controller is a MOSFET based system that can be controlled through either controller area network or a parallel interface to distribute and control power from the vehicle’s battery to the several electrical devices on the car. The Power Distribution Controller also collects output voltage and current data, and communicates this data to the vehicle’s data logger. This will allow engineers to troubleshoot electrical problems on the …

Auxiliary Power System, Karianne Laplante, Nidia Vara, Eve Wassenaar, Carter Whittington

Electrical Engineering

The main objective for this project is to design and build a prototype for an all-electric SUV for the start-up company, Sharpell Technologies. This vehicle will comprise of the following configurations: auxiliary power system (APS), battery management system, battery pack wiring, CAN bus system, DC-DC charging converter, DC/DC auxiliary converter, instrument cluster, and motor controller/inverter. Each car configuration is a project assigned to a 2-4 student team; in total, eight EE senior projects and one ME project is produced. New lightweight batteries are also in the process of being developed to provide a viable electric source for the car. A …

Electronic Deer Warning System, David Zhuo, Anlang Lu

Computer Engineering

Deer-vehicle collisions (DVCs) are extremely dangerous, often injuring or even killing drivers. Unfortunately, this form of automotive accident is commonplace in the United States. According to the NHTSA, DVCs result in 200 human deaths a year.2

Despite these deadly incidents, there currently are no deployed federal or state systems for preventing DVCs. There are many consumer electronic deer deterrent products, but their long-term effectiveness is questionable.3 In fact, there does not appear to be much research into electronic deer deterrent systems. Aside from constant audio output and electric shock, no other means of electronic deterrent exist. Even if fixed deterrents …

The Design And Construction Of A Rear Bumper With Incorporated Spare Tire Rack, Alan C. Isaacson

BioResource and Agricultural Engineering

This senior project outlines the design and construction of a rear bumper with incorporated spare tire and equipment rack for a 1946 Willys CJ2A Jeep. The spare tire rack is capable of swinging out away from the vehicle to allow for the use of the vehicle’s tailgate. The bumper was designed for strength, functionality and aesthetic qualities alike. Additionally, the bumper design considered all vehicle codes and regulations.

Compliant Air Skates, An Experiment, Samuel Feldtkeller, Cody Anderson, Kevin Daily, Eliana Stefani

Mechanical Engineering

There is currently a gap in the market of train levitation systems: wheeled trains and MagLev trains exist, but none utilize the low friction and high efficiency aspect of trains levitated by air skates. An air skate, is an air bearing that uses a pressure difference along its annular body to create a thin flow of air which is strong enough to "levitate" the weight of the skate. We have designed a compliant air skate that can glide over 0.04[in] defects in surfaces without touching down. After having made compliant skirts out of fiberglass and silicone, our setup of three …

Design And Construction Of A Motorcycle Drum To Disc Brake Conversion, Matthew Pekin

BioResource and Agricultural Engineering

This senior project discusses the design and construction of a motorcycle drum to disc brake conversion. The conversion involved creating a custom caliper mount and machining wheel spacers.

Electric Vehicle Torque Vectoring And Rear Steering Control System, Garrett Heinen, Vincent Lee, Michael Parker, Michael Saggese

Mechanical Engineering

NDA

A Lidar Based Semi-Autonomous Collision Avoidance System And The Development Of A Hardware-In-The-Loop Simulator To Aid In Algorithm Development And Human Studies, Thomas F. Stevens

Master's Theses

In this paper, the architecture and implementation of an embedded controller for a steering based semi-autonomous collision avoidance system on a 1/10^th scale model is presented. In addition, the development of a 2D hardware-in-the-loop simulator with vehicle dynamics based on the bicycle model is described. The semi-autonomous collision avoidance software is fully contained onboard a single-board computer running embedded GNU/Linux. To eliminate any wired tethers that limit the system’s abilities, the driver operates the vehicle at a user-control-station through a wireless Bluetooth interface. The user-control-station is outfitted with a game-controller that provides standard steering wheel and pedal controls along …

Analysis Of A Carbon Fiber Reinforced Polymer Impact Attenuator For A Formula Sae Vehicle Using Finite Element Analysis, John T. Rappolt

Master's Theses

The Hashin failure criteria and damage evolution model for laminated fiber reinforced polymers are explored. A series of tensile coupon finite element analyses are run to characterize the variables in the physical model as well as modeling techniques for using an explicit dynamic solver for a quasi-static problem. An attempt to validate the model on an axial tube crush is presented. It was found that fiber buckling was not occurring at the impactor-tube interface. Results and speculation as to why the failure initiation is incorrect are discussed. Lessons learned from the tube crush are applied successfully to the quasi-static Formula …