Automotive Engineering Commons^™

Optimizing Jets For Wake Control Of Ground Vehicles, Domenic Barsotti, Sandra Boetcher

Publications

A system of wake control for a ground vehicle to help promote increased fuel efficiencies of the ground vehicle by modifying an air flow wake generated during the movement of the vehicle in a forward direction. The system includes at least one slot jet configured to be located along a rear profile portion of the ground vehicle. The at least one slot jet is configured to provide a continuous flow of air at a non-zero velocity when the ground vehicle is moving in a forward direction, the non-zero velocity being at least partially directed in a rearward direction with an …

Analysis Of The Electric Vehicles Adoption Over The United States, Ali Soltani-Sobh, Kevin Heaslip, Aleksandar Stevanovic, Ryan Bosworth, Danilo Radiviojevic

Applied Economics Faculty Publications

Increasing the use of electric vehicles (EVs) has been suggested as a possible method to decrease fuel consumption and greenhouse gas (GHG) emissions in an effort to mitigate the causes of climate change. In this study, the relationship between the market share of electric vehicles and the presence of government incentives, and other influential socio-economic factors were examined. The methodology of this study is based on a cross-sectional/time-series (panel) analysis. The developed model is an aggregated binomial logit share model that estimates the modal split between EV and conventional vehicles for different U.S. states from 2003 to 2011. The results …

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …

Injury Severity Data For Front And Second Row Passengers In Frontal Crashes, Theresa Atkinson, Leszek Gawarecki, Massoud S. Tavakoli

Mathematics Publications

The data contained here were obtained from the National Highway Transportation Safety Administration׳s National Automotive Sampling System – Crashworthiness Data System (NASS-CDS) for the years 2008–2014. This publically available data set monitors motor vehicle crashes in the United States, using a stratified random sample frame, resulting in information on approximately 5000 crashes each year that can be utilized to create national estimates for crashes. The NASS-CDS data sets document vehicle, crash, and occupant factors. These data can be utilized to examine public health, law enforcement, roadway planning, and vehicle design issues. The data provided in this brief are a subset …

The Implications Of Self-Driving Cars On Insurance, Amanda Lobello

Honors Projects in Mathematics

Self-driving cars, also known as autonomous vehicles, are being researched and tested by automakers, technology industry leaders, and other institutions. Lawmakers and politicians are discussing the legislation that will affect the fate of such technology. Primary benefits include safety, mobility, free time, less traffic, and green effects. However, there are also obstacles to the implementation of self-driving vehicles including consumer acceptance, legal liability, and cost. With the potential shift in responsibility from driver to automaker, rating factors for insurance may change, weighing more heavily on the model of the car as a factor. The fate of auto insurance is in …

High Voltage Rear Electric Drivetrain Design For A Parallelthrough-The-Road Plug-In Hybrid Electric Vehicle, Adam Garrett Fogarty

Open Access Theses

Purdue University was selected as one of 15 universities to participate in a three year Advanced Vehicle Technology Competition (AVTC) called EcoCar2: Plugging Into the Future. The vehicle built by the Purdue team was a Parallel-Through-The-Road Plug-in Hybrid Electric Vehicle (PTTR PHEV). The vehicle utilized a B20 diesel powertrain to power the front wheels, as well as a custom electric drivetrain to power the rear wheels. Using this vehicle during the final year of the competition, the team was successful in placing 4th overall as well as 2nd in the category of Well-To-Wheel (WTW) Greenhouse Gas Emissions. A stock 2013 …

An Economic Analysis Of Small-Scale Biodiesel Production: Implementation Of Ethyl Ester Production In A Job Shop Setting, Scott Haase, Benjamin Craig

Journal of Undergraduate Research at Minnesota State University, Mankato

Biodiesel is becoming a demanded consumer automotive alternative fuel used in diesel vehicles today. An emerging trend is toward small-scale biodiesel production performed by the final consumer. A limited source of commercially available production systems exists and has resulted in many systems being designed and built by the user. Preliminary research conducted by the authors has shown biodiesel to be the least-cost alternative to petroleum diesel after as few as 8 months of system use. This study examines the economic viability of building and producing biodiesel using a small-scale production system versus buying consumer petroleum diesel. During production, measurements were …

2013 Fall Engr333 Project Final Report, 2013 Fall Engr333

ENGR 333

During the fall of 2013, the Engineering 333 class was asked the question, “what would it take for Calvin College to operate a biofuel vehicle from campus resources?” The three primary considerations included:

• Determining the optimal biofuel feedstock in terms of availability, transportation, and processing.
• Selecting a biofuel vehicle for conversion or purchase to operate on the selected feedstock.
• Designing the infrastructure and process required for operating the selected biofuel vehicle. The design and research described below proposes an environmentally sustainable and cost-effective method for integrating a biofuel vehicle into Calvin’s existing infrastructure.

2013 Fall Engr333 Student Seminar Presentation, Claire Philippi, Karl Bratt, Mike Houtman, Brandon Koster

ENGR 333

File for student presentation, given by students in the Fall 2013 class of ENGR333.

2013 Fall Engr333 Vehicle Poster, 2013 Fall Engr333

ENGR 333

Waste vegetable oil (WVO) was chosen by the class as the best fuel source for the Calvin Biofuel Vehicle Project. The class then considered vehicle options and selected a lawnmower to be powered by WVO.

2013 Fall Engr333 Fuel And Facilities Poster, 2013 Fall Engr333

ENGR 333

The objective of the project was to answer the question: “What would it take for Calvin College to operate a biofuel vehicle from campus resources.” The class split into 3 teams:

• Fuel/Feedstock
• Facilities/Infrastructure
• Vehicle

2013 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2013 ENGR333 project focused on production and use of biofuels at Calvin University.

I asked the students “What would it take for Calvin College to operate a biofuel vehicle from campus resources?”

Customer

The customer for this project was Calvin’s Physical Plant director Phil Beezhold.

Tdma Slot Reservation In Cluster-Based Vanets, Mohammad Salem Almalag

Computer Science Theses & Dissertations

Vehicular Ad Hoc Networks (VANETs) are a form of Mobile Ad Hoc Networks (MANETs) in which vehicles on the road form the nodes of the network. VANETs provide several services to enhance the safety and comfort of drivers and passengers. These services can be obtained by the wireless exchange of information among the vehicles driving on the road. In particular, the transmission of two different types of messages, safety/update and non-safety messages.

The transmission of safety/update message aims to inform the nearby vehicles about the sender's current status and/or a detected dangerous situation. This type of transmission is designed to …

Indeterminate Masses, Elements And Models In Information Fusion, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper at the beginning, we make a short history of the logics, from the classical Boolean logic to the most general logic of today neutrosophic logic. We define the general logic space and give the definition of the neutrosophic logic. Then we introduce the indeterminate models in information fusion, which are due either to the existence of some indeterminate elements in the fusion space or to some indeterminate masses.

The best approach for dealing with such models is the neutrosophic logic, which is part of neutrosophy. Neutrosophic logic is connected with neutrosophic set and neutrosophic probability and statistics.

Detailed Modeling Of Soot Size Distribution Evolution And Pollutant Formation Inside Aircraft And Diesel Engines, Chowdhury Golam Moniruzzaman

Legacy Theses & Dissertations (2009 - 2024)

Combustion emission of soot and pollutant gas species contributes to poor regional air quality near emission sources and to climate change. It is important to understand the formation mechanism and time evolution of these pollutants inside the combustion engine, through detailed modeling of combustion chemistry and microphysics as well as comparison with observation. In this thesis, two multi-zone gas parcel combustion engine models, one for aircraft engines and another for diesel engines, have been developed to study soot size distribution evolution and pollutant formation inside the engines as well as emissions. The models take into account size-resolved (sectional) soot aerosol …

A Framework For Dynamic Traffic Monitoring Using Vehicular Ad-Hoc Networks, Mohammad Hadi Arbabi

Computer Science Theses & Dissertations

Traffic management centers (TMCs) need high-quality data regarding the status of roadways for monitoring and delivering up-to-date traffic conditions to the traveling public. Currently this data is measured at static points on the roadway using technologies that have significant maintenance requirements. To obtain an accurate picture of traffic on any road section at any time requires a real-time probe of vehicles traveling in that section. We envision a near-term future where network communication devices are commonly included in new vehicles. These devices will allow vehicles to form vehicular networks allowing communication among themselves, other vehicles, and roadside units (RSUs) to …

Understanding Industrial Energy Use Through Lean Energy Analysis, Brian Abels, Franc Server, J. Kelly Kissock, Dawit Ayele

Mechanical and Aerospace Engineering Faculty Publications

Due to rising energy costs and global climate change, many industries seek to improve their energy efficiency. This paper describes a three-step method to analyze utility billing, weather, and production data to understand a company’s energy performance over time. The method uses regression modeling of utility billing data against weather and production data. The regression models are then driven with typical weather and production data to calculate the ‘normal annual consumption’, NAC. These steps are repeated on sequential sets of 12 months of data to generate a series of ‘sliding’ NACs and regression coefficients. The method can quantify successful energy …

Data Aggregation And Dissemination In Vehicular Ad-Hoc Networks, Khaled Ibrahim

Computer Science Theses & Dissertations

Vehicular Ad-Hoc Networks (VANETs) are a fast growing technology that many governments and automobile manufacturers are investing in to provide not only safer and more secure roads, but also informational and entertainment-based applications for drivers. The applications developed for VANETs can be classified into multiple categories (safety, informational, entertainment). Most VANET applications, regardless of their category, depend on having certain vehicular data(vehicular speed, X position and Y position) available. Although these applications appear to use the same vehicular data, the characteristics of this data (i.e., amount, accuracy, and update rate) will vary based on the application category. For …

Measuring Progress With Normalized Energy Intensity, Nathan Lammers, J. Kelly Kissock, Brian Abels, Franc Server

Mechanical and Aerospace Engineering Faculty Publications

Energy standard ISO 50001 will require industries to quantify improvement in energy intensity to qualify for certification. This paper describes a four-step method to analyze utility billing, weather, and production data to quantify a company's normalized energy intensity over time. The method uses 3-pararameter change-point regression modeling of utility billing data against weather and production data to derive energy signature equations. The energy signature equation is driven by typical weather and production data to calculate the 'normal annual consumption', NAC, and divided by typical production to calculate 'normalized energy intensity' NEI. These steps are repeated on sequential sets of 12 …

Optimizing Compressed Air Storage For Energy Efficiency, Brian Abels, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Compressed air storage is an important, but often misunderstood, component of compressed air systems. This paper discusses methods to properly size compressed air storage in load-unload systems to avoid short cycling and reduce system energy use. First, key equations relating storage, pressure, and compressed air flow are derived using fundamental thermodynamic relations. Next, these relations are used to calculate the relation between volume of storage and cycle time in load-unload compressors. It is shown that cycle time is minimized when compressed air demand is 50% of compressor capacity. The effect of pressure drop between compressor system and storage on cycle …

Improving Compressed Air Energy Efficiency In Automotive Plants: Practical Examples And Implementation, Nasr Alkadi, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

The automotive industry is the largest industry in the United States in terms of the dollar value of production [1]. U.S. automakers face tremendous pressure from foreign competitors, which have an increasing manufacturing presence in this country. The Big Three North American Original Equipment Manufacturers (OEMs)-General Motors, Ford, and Chrysler-are reacting to declining sales figures and economic strain by working more efficiently and seeking out opportunities to reduce production costs without negatively affecting the production volume or the quality of the product. Successful, cost-effective investment and implementation of the energy efficiency technologies and practices meet the challenge of maintaining the …

Drag Reduction Of A Modern Straight Truck, Drew Landman, Matthew Cragun, Mike Mccormick, Richard Wood

Mechanical & Aerospace Engineering Faculty Publications

A wind tunnel test program was conducted at the Langley Full Scale Tunnel (LFST) to evaluate the performance of five passive drag reduction configurations on a modern straight truck at full scale. Configurations were tested in a build-up fashion with results representing a cumulative effect. Tested configurations include a front valance, a front box fairing, a boat-tail, an ideal side-skirt, and a practical side-skirt. Configurations were evaluated over a nominal 9 degree yaw sweep to establish wind averaged drag coefficients using SAE J1252. Genuine replicate yaw sweeps were used in an uncertainty analysis. Results show up to 28% improvement in …

Marine Buoy Detection Using Circular Hough Transform, Loc Tran, Justin Selfridge, Gene Hou, Jiang Li

Electrical & Computer Engineering Faculty Publications

A low cost method for buoy detection in maritime settings is presented using inexpensive digital cameras. In this method, the circular Hough transform is applied to an edge image to circular objects in the image. The center of these circles will signify the locations of each buoy. The known color information of the buoys is also used to enhance the performance by removing false detections. The algorithm is compared to an approach that locates buoys purely on color information. In order to validate the method, we test the approach synthetically and also with real images captured from a small surface …

Providing Location Security In Vehicular Ad Hoc Networks, Gongjun Yan

Computer Science Theses & Dissertations

Location is fundamental information in Vehicular Ad-hoc Networks (VANETs). Almost all VANET applications rely on location information. Therefore it is of importance to ensure location information integrity, meaning that location information is original (from the generator), correct (not bogus or fabricated) and unmodified (value not changed). We present validation mechanisms to provide location integrity for VANETs. In the initial mechanism, we assume that all vehicles are equipped with a radar, a GPS receiver, and a transceiver. Since radar has a limited radar range and transceiver has a limited transmission range, we build network cells as a security unit as well …

Fusion Of Imprecise Qualitative Information, Florentin Smarandache, Xinde Li, Xianzhong Dai, Jean Dezert

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper, we present a new 2-tuple linguistic representation model, i.e. Distribution Function Model (DFM), for combining imprecise qualitative information using fusion rules drawn from Dezert-Smarandache Theory (DSmT) framework. Such new approach allows to preserve the precision and efficiency of the combination of linguistic information in the case of either equidistant or unbalanced label model. Some basic operators on imprecise 2-tuple labels are presented together with their extensions for imprecise 2-tuple labels. We also give simple examples to show how precise and imprecise qualitative information can be combined for reasoning under uncertainty. It is concluded that DSmT can deal …

Internet Enabled Remote Driving Of A Combat Hybrid Electric Power System For Duty Cycle Measurement, Jarrett Goodell, Marc Compere, Wilford Smith, Mark Brudnak, Mike Pozolo, Et Al.

Publications

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware, both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1,7]. This paper is written in the context of [1,7] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Energy System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Soldier/Hardware-In-The-Loop Simulation-Based Combat Vehicle Duty Cycle Measurement: Duty Cycle Experiment 2, Mark Brudnak, Mike Pozolo, Victor Paul, Syed Mohammad, Marc Compere, Et Al.

Publications

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1]. This paper is written in the context of [1] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Electric System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Robust Control Techniques Enabling Duty Cycle Experiments Utilizing A 6-Dof Crewstation Motion Base, A Full Scale Combat Hybrid Electric Power System, And Long Distance Internet Communications, Marc Compere, Jarrett Goodell, Miguel Simon, Wilford Smith, Mark Brudnak

Publications

The RemoteLink effort supports the U.S. Army's objective for developing and fielding next generation hybrid-electric combat vehicles. It is a distributed soldierin- the-Ioop and hardware-in-the-Ioop environment with a 6-DOF motion base for operator realism, a full-scale combat hybrid electric power system, and an operational context provided by OneSAF. The driver/gunner crewstations rest on one of two 6-DOF motion bases at the U.S. Army TARDEC Simulation Laboratory (TSL). The hybrid power system is located 2,450 miles away at the TARDEC Power and Energy System Integration Laboratory (P&E SIL). The primary technical challenge in the RemoteLink is to operate both laboratories together …

Energy Efficient Process Heating: Insulation And Thermal Mass, Kevin Carpenter, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Open tanks and exterior surfaces of process heating equipment lose heat to the surroundings via convection, radiation, and/or evaporation. A practical way of reducing heat loss is by insulating or covering the surfaces. This paper presents methods to quantify heat loss and energy savings from insulating hot surfaces and open tanks. The methods include radiation and evaporation losses, which are ignored by simplified methods. In addition, thermal mass, such as refractory, conveyor and racking equipment, acts as a heat sink and increases heating energy use in process heating applications. This paper presents lumped capacitance and finite-difference methods for estimating heat …

Energy Efficient Process Heating: Managing Air Flow, Kevin Carpenter, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Much energy is lost through excess air flow in and out of process heating equipment. Energy saving opportunities from managing air flow include minimizing combustion air, preheating combustion air, minimizing ventilation air, and reconfiguring openings to reduce leakage.

This paper identifies these opportunities and presents methods to quantify potential energy savings from implementing these energy-savings measures. Case study examples are used to demonstrate the methods and the potential energy savings.The method for calculating savings from minimizing combustion air accounts for improvement in efficiency from increased combustion temperature and decreased combustion gas mass flow rate.

The method for calculating savings from …