Automotive Engineering Commons^™

Guest Editorial Special Issue On Toward Securing Internet Of Connected Vehicles (Iov) From Virtual Vehicle Hijacking, Yue Cao, Houbing Song, Omprakash Kaiwartya, Sinem Coleri Ergen, Jaime Lloret, Naveed Ahmad

Publications

Today’s vehicles are no longer stand-alone transportation means, due to the advancements on vehicle-tovehicle (V2V) and vehicle-to-infrastructure (V2I) communications enabled to access the Internet via recent technologies in mobile communications, including WiFi, Bluetooth, 4G, and even 5G networks. The Internet of vehicles was aimed toward sustainable developments in transportation by enhancing safety and efficiency. The sensor-enabled intelligent automation of vehicles’ mechanical operations enhances safety in on-road traveling, and cooperative traffic information sharing in vehicular networks improves traveling efficiency.

Comparison Of Lqr And Lqr-Mrac For Linear Tractor-Trailer Model, Kevin Richard Gasik

Master's Theses

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural …

Autonomous Watercraft Simulation And Programming, Nicholas J. Savino

Student Scholar Showcase

Automation of various modes of transportation is thought to make travel more safe and efficient. Over the past several decades, advances to semi-autonomous and autonomous vehicles have led to advanced autopilot systems on planes and boats, and an increasing popularity of self-driving cars. We predicted the motion of an autonomous vehicle using simulations in Python. The simulation models the motion of a small scale watercraft, which can then be built and programmed using an Arduino Microcontroller. We examined different control methods for a simulated rescue craft to reach a target. We also examined the effects of different factors, such as …

10_Fdr_Written_Project Central Vehicle Controller For Hybrid Racecar, Elias D. Bello, Trammell J. Saltzgaber, Leina C. Mcdermott, Alex S. Newman, Jennifer Jain

ENGS 89/90 Reports

Our ENGS 89/90 team has designed and tested a new central vehicle controller for the Dartmouth Formula Racing team's hybrid racecar. The new controller allows for the implementation of various control strategies, logs data from sensors onboard the vehicle, and is accompanied by well-documented firmware and hardware and an automotive-grade enclosure.

Edge Heterogeneous Hardware Evaluation Based On Real Connected And Autonomous Vehicles (Cavs) Workloads, Mustafa Ahmad

Research Opportunities for Engineering Undergraduates (ROEU) Program 2018-19

There has recently been a wide expansion of hardware to assist in autonomous driving tasks. On this project, we focus on using some state-of-the-art deep learning workloads in connected autonomous vehicle (CAV) scenarios,such as object detection and object tracking to evaluate the heterogeneous hardware.

Unsupervised Feature Learning For Point Cloud By Contrasting And Clustering With Graph Convolutional Neural Network, Ling Zhang

Dissertations and Theses

Recently, deep graph neural networks (GNNs) have attracted significant attention for point cloud understanding tasks, including classification, segmentation, and detection. However, the training of such deep networks still requires a large amount of annotated data, which is both expensive and time-consuming. To alleviate the cost of collecting and annotating large-scale point cloud datasets, we propose an unsupervised learning approach to learn features from unlabeled point cloud ”3D object” dataset by using part contrasting and object clustering with GNNs. In the contrast learning step, all the samples in the 3D object dataset are cut into two parts and put into a …

Investigation And Development Of Exhaust Flow Rate Estimation Methodologies For Heavy-Duty Vehicles, Chakradhar Reddy Vardhireddy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Exhaust gas flow rate from a vehicle tailpipe has a great influence on emission mass rate calculations, as the emission fractions of individual gases in the exhaust are calculated by using the measured exhaust flow rate. The development of high-end sensor technologies and emission pollutant measurement instruments, which can give instantaneous values of volume concentration of pollutants flowing out of the engine are gaining importance because of their ease of operation. The volume concentrations measured can then be used with the instantaneous exhaust flow rate values to obtain mass flow rates of pollutants.

With the recent promulgation of real world …

Roadnet: Robust Adaptive Network For Information Diffusion In Vanet, Priyashraba Misra

Graduate Theses, Dissertations, and Problem Reports (ETD)

The automotive industry has changed more in the last one decade than ever before. Rapid advancements in autonomous driving have opened up opportunities for CAVs (Connected and Automated Vehicles). Vehicles today rely on a sensor-suite to map the surrounding and use that information for safety and navigation. The sensor's view is limited to its line of sight and this drawback can be tapered off by using Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I), generally referred to as Vehicle to Everything (V2X) communication. In this thesis, we specifically focus on utilizing V2V communication using on-board Dedicated Short Range Communication …

A Survey Of Security Attacks And Defenses In Vehicular Ad-Hoc Networks, Pierson Yieh

Computer Science and Software Engineering

No abstract provided.

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …

Vehicle Pseudonym Association Attack Model, Pierson Yieh

Master's Theses

With recent advances in technology, Vehicular Ad-hoc Networks (VANETs) have grown in application. One of these areas of application is Vehicle Safety Communication (VSC) technology. VSC technology allows for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications that enhance vehicle safety and driving experience. However, these newly developing technologies bring with them a concern for the vehicular privacy of drivers. Vehicles already employ the use of pseudonyms, unique identifiers used with signal messages for a limited period of time, to prevent long term tracking. But can attackers still attack vehicular privacy even when vehicles employ a pseudonym change strategy? The major contribution …

Assessing The Competing Characteristics Of Privacy And Safety Within Vehicular Ad Hoc Networks, Jacob W. Connors

Theses and Dissertations

The introduction of Vehicle-to-Vehicle (V2V) communication has the promise of decreasing vehicle collisions, congestion, and emissions. However, this technology places safety and privacy at odds; an increase of safety applications will likely result in the decrease of consumer privacy. The National Highway Traffic Safety Administration (NHTSA) has proposed the Security Credential Management System (SCMS) as the back end infrastructure for maintaining, distributing, and revoking vehicle certificates attached to every Basic Safety Message (BSM). This Public Key Infrastructure (PKI) scheme is designed around the philosophy of maintaining user privacy through the separation of functions to prevent any one subcomponent from identifying …

Vehicle-To-Barrier Communication During Real-World Vehicle Crash Tests, Samil Temel, Mehmet C. Vuran, Mohammad M.R. Lunar, Zhongyuan Zhao, Abdul Salam, Ronald K. Faller, Cody S. Stolle

School of Computing: Faculty Publications

Vehicle-to-barrier (V2B) communication is expected to facilitate wireless interactions between vehicles and roadside barriers in next-generation intelligent transportation systems. V2B systems will help mitigate single-vehicle, run-off-road crashes, which account for more than 50% of roadside crash fatalities. In this work, the characteristics of the wireless channel prior to and during a crash are analyzed using orthogonal frequency division multiplexing (OFDM) techniques, which has been used in existing vehicular communication systems. More specifically, the performance of OFDM-based V2B links are measured in real-world crash tests for the first time. Three crash tests conducted at the Midwest Roadside Safety Facility, Lincoln, Nebraska, …

Crop Height Estimation With Unmanned Aerial Vehicles, Carrick Detweiler, David Anthony, Sebastian Elbaum

School of Computing: Faculty Publications

An unmanned aerial vehicle (UAV) can be configured for crop height estimation. In some examples, the UAV includes an aerial propulsion system, a laser scanner configured to face downwards while the UAV is in flight, and a control system. The laser scanner is configured to scan through a two-dimensional scan angle and is characterized by a maxi mum range. The control system causes the UAV to fly over an agricultural field and maintain, using the aerial propulsion system and the laser scanner, a distance between the UAV and a top of crops in the agricultural field to within a programmed …

An Empirical Study To Investigate The Effect Of Air Density Changes On The Dsrc Performance, Mostafa El-Said, Vijay Bhuse, Alexander Arendsen

Peer-Reviewed Publications

The primary role of Intelligent Transportation Systems (ITS) system is to implement Advanced Driver Assistance Services (ADAS) such as pedestrian detection, fog detection and collisions avoidance. These services rely on detecting and communicating the environment conditions such as heavy rain or snow with nearby vehicles to improve the driver's visibility. ITS systems rely on DSRC to communicate this information via a Vehicle-to-Vehicle (V2V) or Vehicle-to-Infrastructure (V2I) communications architectures. DSCR performance may be susceptible to environmental changes such as air density, gravitation (gravitational acceleration), air temperature, atmospheric pressure, humidity, and precipitation.

The goal of this research is to investigate whether the …

Autonomous Speed Control For Kia Optima, Andrew J. Combs, Kyle Fugatt, Kevin Mcfall

The Kennesaw Journal of Undergraduate Research

The standard method for speed control is the cruise control system built into most modern vehicles. These systems employ a PID controller which actuates the accelerator thus, in turn, maintains the desired vehicle speed. The main drawback of such a system is that typically the cruise control will only engage above 25 mph. The goal of this paper is to describe a system which we used to control vehicle speed from a stop to any desired speed using an Arduino microcontroller and a CAN BUS shield, from where autonomous features can be built upon. With this system, we were able …

Intelligent Ground Vehicle Competition, Austin R. Tyler, Chris R. Estock, Johnathan P. Johenning, Garrett W. Chonko, Allen C. Gilleland

Williams Honors College, Honors Research Projects

The Intelligent Ground Vehicle Competition (IGVC) draws teams from various universities to compete in the annual autonomous vehicle challenge at the Oakland University campus. To compete, a vehicle must be fully autonomous and can navigate a course designated by various obstacles and painted white lines. Some design challenges are motor control, navigation, environment sensing and safety. A complex navigation system will utilize several tools including a high-precision differential GPS. The vehicle’s surroundings will be mapped using a combination of Light Detection and Ranging (LiDAR) and computer-vision enabled imaging. To comply with IGVC rules, the vehicle must also follow several safety …

Electronic Deer Warning System, David Zhuo, Anlang Lu

Computer Engineering

Deer-vehicle collisions (DVCs) are extremely dangerous, often injuring or even killing drivers. Unfortunately, this form of automotive accident is commonplace in the United States. According to the NHTSA, DVCs result in 200 human deaths a year.2

Despite these deadly incidents, there currently are no deployed federal or state systems for preventing DVCs. There are many consumer electronic deer deterrent products, but their long-term effectiveness is questionable.3 In fact, there does not appear to be much research into electronic deer deterrent systems. Aside from constant audio output and electric shock, no other means of electronic deterrent exist. Even if fixed deterrents …

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …

The Design Of A Racing Simulator: A Three-Phase User Testing Approach, Jakob E. Rouleau, Eric J. Wach

Human Factors and Applied Psychology Student Conference

No abstract provided.

A Lidar Based Semi-Autonomous Collision Avoidance System And The Development Of A Hardware-In-The-Loop Simulator To Aid In Algorithm Development And Human Studies, Thomas F. Stevens

Master's Theses

In this paper, the architecture and implementation of an embedded controller for a steering based semi-autonomous collision avoidance system on a 1/10^th scale model is presented. In addition, the development of a 2D hardware-in-the-loop simulator with vehicle dynamics based on the bicycle model is described. The semi-autonomous collision avoidance software is fully contained onboard a single-board computer running embedded GNU/Linux. To eliminate any wired tethers that limit the system’s abilities, the driver operates the vehicle at a user-control-station through a wireless Bluetooth interface. The user-control-station is outfitted with a game-controller that provides standard steering wheel and pedal controls along …

Stability Of Transportation Networks Under Adaptive Routing Policies, Sebastien Boyer, Sebastien Blandin, Laura Wynter

Research Collection School Of Computing and Information Systems

Growing concerns regarding urban congestion, and the recent explosion of mobile devices able to provide real-time information to traffic users have motivated increasing reliance on real-time route guidance for the online management of traffic networks. However, while the theory of traffic equilibria is very well-known, much fewer results exist on the stability of such equilibria, especially in the context of adaptive routing policy. In this work, we consider the problem of characterizing the stability properties of traffic equilibria in the context of online adaptive route choice induced by GPS-based decision making. We first extend the recent framework of “Markovian Traffic …

An Empirical Approach To The Re-Creation Of Vehicle Drive Cycles, Andrew J. Larson

Open Access Theses

Vehicles such as buses, delivery trucks, mining equipment, and motorsport vehicles often repeat a highly defined pattern, route, or track during normal use. For these vehicles, standard dynamometer drive cycles are of little use. It was proposed that deriving a vehicle drive cycle from empirical data collected from on-board vehicle sensors would produce more accurate vehicle characteristic predictions for special purpose vehicles. This study answers the question "Is it possible to use recorded vehicle data to replicate a real world driving scenario for the purpose of vehicle diagnostics?" To reduce the complexity of the project, an electric go-kart was used …

Tdma Slot Reservation In Cluster-Based Vanets, Mohammad Salem Almalag

Computer Science Theses & Dissertations

Vehicular Ad Hoc Networks (VANETs) are a form of Mobile Ad Hoc Networks (MANETs) in which vehicles on the road form the nodes of the network. VANETs provide several services to enhance the safety and comfort of drivers and passengers. These services can be obtained by the wireless exchange of information among the vehicles driving on the road. In particular, the transmission of two different types of messages, safety/update and non-safety messages.

The transmission of safety/update message aims to inform the nearby vehicles about the sender's current status and/or a detected dangerous situation. This type of transmission is designed to …

Indeterminate Masses, Elements And Models In Information Fusion, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper at the beginning, we make a short history of the logics, from the classical Boolean logic to the most general logic of today neutrosophic logic. We define the general logic space and give the definition of the neutrosophic logic. Then we introduce the indeterminate models in information fusion, which are due either to the existence of some indeterminate elements in the fusion space or to some indeterminate masses.

The best approach for dealing with such models is the neutrosophic logic, which is part of neutrosophy. Neutrosophic logic is connected with neutrosophic set and neutrosophic probability and statistics.

A Framework For Dynamic Traffic Monitoring Using Vehicular Ad-Hoc Networks, Mohammad Hadi Arbabi

Computer Science Theses & Dissertations

Traffic management centers (TMCs) need high-quality data regarding the status of roadways for monitoring and delivering up-to-date traffic conditions to the traveling public. Currently this data is measured at static points on the roadway using technologies that have significant maintenance requirements. To obtain an accurate picture of traffic on any road section at any time requires a real-time probe of vehicles traveling in that section. We envision a near-term future where network communication devices are commonly included in new vehicles. These devices will allow vehicles to form vehicular networks allowing communication among themselves, other vehicles, and roadside units (RSUs) to …

Data Aggregation And Dissemination In Vehicular Ad-Hoc Networks, Khaled Ibrahim

Computer Science Theses & Dissertations

Vehicular Ad-Hoc Networks (VANETs) are a fast growing technology that many governments and automobile manufacturers are investing in to provide not only safer and more secure roads, but also informational and entertainment-based applications for drivers. The applications developed for VANETs can be classified into multiple categories (safety, informational, entertainment). Most VANET applications, regardless of their category, depend on having certain vehicular data(vehicular speed, X position and Y position) available. Although these applications appear to use the same vehicular data, the characteristics of this data (i.e., amount, accuracy, and update rate) will vary based on the application category. For …

Providing Location Security In Vehicular Ad Hoc Networks, Gongjun Yan

Computer Science Theses & Dissertations

Location is fundamental information in Vehicular Ad-hoc Networks (VANETs). Almost all VANET applications rely on location information. Therefore it is of importance to ensure location information integrity, meaning that location information is original (from the generator), correct (not bogus or fabricated) and unmodified (value not changed). We present validation mechanisms to provide location integrity for VANETs. In the initial mechanism, we assume that all vehicles are equipped with a radar, a GPS receiver, and a transceiver. Since radar has a limited radar range and transceiver has a limited transmission range, we build network cells as a security unit as well …

Soldier/Hardware-In-The-Loop Simulation-Based Combat Vehicle Duty Cycle Measurement: Duty Cycle Experiment 2, Mark Brudnak, Mike Pozolo, Victor Paul, Syed Mohammad, Marc Compere, Et Al.

Publications

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1]. This paper is written in the context of [1] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Electric System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Robust Control Techniques Enabling Duty Cycle Experiments Utilizing A 6-Dof Crewstation Motion Base, A Full Scale Combat Hybrid Electric Power System, And Long Distance Internet Communications, Marc Compere, Jarrett Goodell, Miguel Simon, Wilford Smith, Mark Brudnak

Publications

The RemoteLink effort supports the U.S. Army's objective for developing and fielding next generation hybrid-electric combat vehicles. It is a distributed soldierin- the-Ioop and hardware-in-the-Ioop environment with a 6-DOF motion base for operator realism, a full-scale combat hybrid electric power system, and an operational context provided by OneSAF. The driver/gunner crewstations rest on one of two 6-DOF motion bases at the U.S. Army TARDEC Simulation Laboratory (TSL). The hybrid power system is located 2,450 miles away at the TARDEC Power and Energy System Integration Laboratory (P&E SIL). The primary technical challenge in the RemoteLink is to operate both laboratories together …