Automotive Engineering Commons^™

The Future State Of Mobility, Jerome Quandt

Purdue Road School

Formed in 2018, the Illinois Autonomous Vehicles Association (ILAVA) is a privately funded non-for-profit organization focused on establishing thought leadership in the state of Illinois, by identifying and addressing the current and emerging opportunities related to the inevitable growth of CAV technologies throughout the transportation network. Through the deployment of scalable and sustainable business solutions, facilitating industry education and establishing thought leadership, ILAVA is creating an ecosystem that defines Illinois as #TheFutureStateofMobility.

Degrader Analysis For Diagnostic And Predictive Capabilities: A Demonstration Of Progress In Dod Cbm+ Initiatives, William Baker, Steven Nixon, Jeffrey Banks, Karl Reichard, Kaitlynn Castelle

Engineering Management & Systems Engineering Faculty Publications

This paper presents a modified reliability centered maintenance (RCM) methodology developed by The Applied Research Laboratory at The Pennsylvania State University (ARL Penn State) to meet challenges in decreasing life cycle sustainment costs for critical Naval assets. The focus of this paper is on the requirements for the development of the on-board Prognostics and Health Management (PHM) system with a discussion on the implementation progress for two systems: the high pressure air compressor (HPAC), and the advanced carbon dioxide removal unit (ACRU). Recent Department of Defense (DoD) guidance calls for implementing Condition Based Maintenance (CBM) as an alternative to traditional …

The Covid-19 Pandemic And Transportation Engineering, Chris Hendrickson,, Laurence Rilett

Department of Civil and Environmental Engineering: Faculty Publications

The COVID-19 pandemic has been an enormous global disruption with immense economic, environmental, and social impacts throughout the world. Only world wars and the flu pandemic of 1918 are comparable in the wide range of consequences, including fatalities, over a relatively short period of time. Unfortunately, we can expect other major disruptions to occur in the future. In this editorial, we intend to discern some lessons for the transportation engineering profession that can be learned from the current catastrophe that can help us prepare for future disruptions. We will ignore nontransportation aspects of the pandemic such as the development of …

Investigation Of Urea Decomposition And Deposit Formation In Diesel Exhaust After-Treatment System, Anand Alembath

Doctoral Dissertations

“Urea-selective catalytic reduction (SCR) system has proved to be an effective solution to reduce NO_x emissions in commercial vehicle (CV) diesel engines. A significant challenge in urea injection is to comprehend its decomposition chemistry that leads to formation of undesired deposits in the exhaust system unit. Due to complex interaction of multi-phase fluid flow and transport processes, significant uncertainty is associated with the identification of interacting factors that control the deposit initiation and its growth. To meet the future ultra-low NO_x emissions and to deliver ammonia without deposit formation, there is an imminent need to develop the urea-SCR …

Impact Of Smart Phones’ Interaction Modality On Driving Performance For Conventional And Autonomous Vehicles, Francesca M. Favarò

Mineta Transportation Institute

Distracted driving related to cell phone usage ranks among the top three causes of fatal crashes on the road. Although forty-eight of 50 U.S. states allow the use of personal devices if operated hands-free and secured in the vehicle, scientific studies have yet to quantify the safety improvement presumed to be introduced by voice-to-text interactions. Thus, this study investigated how different modes of interaction of drivers with a smart phone (i.e., manual texting vs. vocal input) affect drivers’ distraction and performance in both conventional and semi-autonomous vehicles. The study was executed in a full-car integrated simulator and tested a population …

Analysis Of Disengagements In Semi-Autonomous Vehicles: Drivers’ Takeover Performance And Operational Implications, Francesca M. Favaro, Sky Eurich, Syeda Rizvi, Shivangi Agarwal, Sumaid Mahmood, Nazanin Nader

Mineta Transportation Institute

This report analyzes the reactions of human drivers placed in simulated Autonomous Technology disengagement scenarios. The study was executed in a human-in-the-loop setting, within a high-fidelity integrated car simulator capable of handling both manual and autonomous driving. A population of 40 individuals was tested, with metrics for control takeover quantification given by: i) response times (considering inputs of steering, throttle, and braking); ii) vehicle drift from the lane centerline after takeover as well as overall (integral) drift over an S-turn curve compared to a baseline obtained in manual driving; and iii) accuracy metrics to quantify human factors associated with the …

Crash Severity Analysis Of Rear-End Crashes In California Using Statistical And Machine Learning Classification Methods, Alidad Ahmadi, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

Investigating drivers’ injury level and detecting contributing factors that aggravate the damage level imposed on drivers and vehicles is a critical subject in the field of crash analysis. In this study, a comprehensive vehicle-by-vehicle crash data set is developed by integrating 5 years of data from California crash, vehicles involved, and road databases. The data set is used to model the severity of rear-end crashes for comparing three analytic techniques: multinomial logit, mixed multinomial logit, and support vector machine (SVM). The results of the crash severity models and the role of contributing factors to the severity outcome of rear-end crashes …

Does Length Of Ride, Gender Or Nationality Affect Willingness To Ride In A Driverless Ambulance?, Stephen Rice, Scott R. Winter, Rian Mehta, Joseph R. Keebler, Bradley S. Baugh, Emily C. Anania, Mattie N. Milner

Publications

Due to the frequent lack of ambulances and personnel, the purpose of this study was to examine consumers’ willingness-to-ride in an ambulance that was either driven by a human driver or completely automated (with no human driver) based on the gender of the participant and their nationality, either Indian or American. A two-study experimental design was utilized using over 1,000 participants. In Study 1, the length of the ride and the type of driver were manipulated while in Study 2, the length of the ride was manipulated across genders and nationality. Study 2 also collected affect measures to complete a …

Development Of Iowa Dot Combination Bridge Separation Barrier With Bicycle Railing, Chaz M. Ginger

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The Iowa Department of Transportation typically builds separation barriers between vehicle and pedestrian/bicycle facilities when sidewalks or trails are present on vehicular bridges. Currently, Iowa DOT employs a combination bridge rail that utilizes a concrete parapet that previously had been successfully evaluated to National Cooperative Highway Research Program (NCHRP) Report 350 Test Level 4 (TL-4) criteria for these situations. While the parapet had been successfully evaluated, the combination bridge rail system as a whole had not been evaluated to any crash test standards. Iowa DOT desired that researchers at Midwest Roadside Safety Facility (MwRSF) design and test a combination bridge …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …

Indicators Of Assessing Vehicle Safety Status Under Platoon Conditions At Freeway, Jianan Zhou

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Issue on level freeway segment (Interstate 80) in Nebraska: • High truck percentage (higher than 25%) • Different speed profile - The speed of trucks are set to 67 mph, on average. - The speed of passenger cars are 75 mph, on average. • Result platoons - Approximately 85% of vehicles are observed in platoon. - the degree of freedom to maneuver for drivers are constrained by other in-platoon vehicles. - Vehicles in platoons may face unsafe situation. Goal: Develop indicators to assess the safety status of vehicles under platoon conditions at level freeway segment.

The data were collected at …

Development Of A Test Level 3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, David Gutierrez, Ronald K. Faller, John D. Reid, Phil Tenhulzen

Department of Civil and Environmental Engineering: Faculty Publications

Road construction often requires that work zones be created and shielded by portable concrete barriers (PCBs) to protect workers and equipment from errant vehicles as well as to prevent motorists from striking other roadside hazards. For an existing W-beam guardrail system installed adjacent to the roadway and near the work zone, guardrail sections are removed so a PCB system can be placed. A study was done to develop a crashworthy transition between W-beam guardrail and PCB systems. Design concepts were developed and refined through computer simulation with LS-DYNA. Additionally, a study of critical impact points was conducted to determine impact …

Calibrating The Robertson’S Platoon Dispersion Model On A Coordinated Corridor With Advance Warning Flashers, Zhao Li, Laurence Rilett, Ernest Tufuor

Department of Civil and Environmental Engineering: Faculty Publications

Platoon dispersion (PD) is the foundation of traffic signal coordination in an urban traffic network. PD describes the phenomenon by which vehicles depart from an upstream intersection as a platoon and begin to disperse before they arrive at the downstream intersection. Recently, advance warning flashers (AWFs) have been applied in many high-speed corridors. There is a need to update the traditional PD model to include the effect of AWFs. This paper examines the traffic flow dispersion patterns when an AWF is present and tests the hypothesis that the AWF will affect PD on a coordinated signal corridor. Platoon vehicles, which …

The Design And Construction Of A Rear Bumper With Incorporated Spare Tire Rack, Alan C. Isaacson

BioResource and Agricultural Engineering

This senior project outlines the design and construction of a rear bumper with incorporated spare tire and equipment rack for a 1946 Willys CJ2A Jeep. The spare tire rack is capable of swinging out away from the vehicle to allow for the use of the vehicle’s tailgate. The bumper was designed for strength, functionality and aesthetic qualities alike. Additionally, the bumper design considered all vehicle codes and regulations.

Investigating The Relationship Between Latent Driving Patterns And Traffic Safety Using Smartphone-Based Mobile Sensor Data, Kenneth Wynne

Civil & Environmental Engineering Theses & Dissertations

Crash frequency modelling has been used in the past as an attempt to quantify the expected number of crashes occurring on a certain segment of roadway given a set of variables and factors describing the roadway segment and the traffic along that segment. These models are referred to as the Safety Performance Functions (SPFs) in the Highway Safety Manual (HSM). In past studies, these SPFs have focused primarily on roadway geometric information along with limited traffic exposure data such as traffic volume. Alternate data sources for probe vehicle data are increasingly available and this research sought to exploit this new …

3d Infrastructure Condition Assessment For Rail Highway Applications, Teng Wang

Theses and Dissertations--Civil Engineering

Highway roughness is a concern for both the motoring public and highway authorities. Roughness may even increase the risk of crashes. Rail-highway grade crossings are particularly problematic. Roughness may be due to deterioration or simply due to the way the crossing was built to accommodate grade change, local utilities, or rail elevation. With over 216,000 crossings in the US, maintenance is a vast undertaking. While methods are available to quantify highway roughness, no method exists to quantitatively assess the condition of rail crossings. Conventional inspection relies on a labor-intensive process of qualitative judgment. A quantifiable, objective and extensible procedure for …

Crash Frequency Analysis Of Left-Side Merging And Diverging Areas On Urban Freeway Segments: A Case Study Of I-75 Through Downtown Dayton, Ohio, Deogratias Eustace, Aline Aylo, Worku Y. Mergia

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

This paper analyzes the effect of left- and right-side merging and diverging areas and other variables such as light condition, roadway pavement condition, drivers’ age and presence of construction work zones on the occurrence frequency of crashes. A 6.5-mile (10.5-km) section of I-75 that passes through downtown Dayton, Ohio was considered. The area of interest has a high traffic volume and consists of different geometric design challenges including closely spaced merging and diverging ramps. A four-year record of crash data (2005–2008) and a statistical modeling technique that assumes a negative binomial distribution on generalized linear models (GLMs) were used to …

Virtual Analysis And Evaluation Of Roundabout Safety And Operational Features, Elisha Jackson Wankogere

Masters Theses

Roundabouts can be a solution to safety concerns present at other types of intersections. Recently in the United States, there has been an increase in conversion of problematic intersections to roundabouts to improve their safety. However, it is difficult to make these roundabouts, especially multi-lane roundabouts, safe to all ranges of users. Roundabout features such as advance warning and signage play an important role in determining driver performance as they navigate the roundabout.

This research is an effort to evaluate new and existing roundabout safety and operational features such as signs and pavement markings and how they influence performance of …

High Voltage Rear Electric Drivetrain Design For A Parallelthrough-The-Road Plug-In Hybrid Electric Vehicle, Adam Garrett Fogarty

Open Access Theses

Purdue University was selected as one of 15 universities to participate in a three year Advanced Vehicle Technology Competition (AVTC) called EcoCar2: Plugging Into the Future. The vehicle built by the Purdue team was a Parallel-Through-The-Road Plug-in Hybrid Electric Vehicle (PTTR PHEV). The vehicle utilized a B20 diesel powertrain to power the front wheels, as well as a custom electric drivetrain to power the rear wheels. Using this vehicle during the final year of the competition, the team was successful in placing 4th overall as well as 2nd in the category of Well-To-Wheel (WTW) Greenhouse Gas Emissions. A stock 2013 …

Application Of Uav In Maritime Search And Rescue Activities, Xiaojie Wang

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Lessons In On-Campus And Distance Learning Delivery Of An Introductory Naval Architecture Course, Jennifer G. Michaeli

Engineering Technology Faculty Publications

This paper describes the author’s experiences in multi-mode (face-to-face and online) delivery of an introductory-level course on the topic of Naval Architecture geared towards anaudience of engineering and engineering technology undergraduate students with no previousmaritime background. The goal of this course is to expose talented undergraduate engineering students to the marine industry and to prepare those interested in pursing a career in this field with an introductory understanding of the complex nature of designing and building ships and other marine vessels. This course was offered in Spring 2013 and Fall 2013 to a group of engineering and engineering technology students. …

2013 Fall Engr333 Project Final Report, 2013 Fall Engr333

ENGR 333

During the fall of 2013, the Engineering 333 class was asked the question, “what would it take for Calvin College to operate a biofuel vehicle from campus resources?” The three primary considerations included:

• Determining the optimal biofuel feedstock in terms of availability, transportation, and processing.
• Selecting a biofuel vehicle for conversion or purchase to operate on the selected feedstock.
• Designing the infrastructure and process required for operating the selected biofuel vehicle. The design and research described below proposes an environmentally sustainable and cost-effective method for integrating a biofuel vehicle into Calvin’s existing infrastructure.

2013 Fall Engr333 Student Seminar Presentation, Claire Philippi, Karl Bratt, Mike Houtman, Brandon Koster

ENGR 333

File for student presentation, given by students in the Fall 2013 class of ENGR333.

2013 Fall Engr333 Vehicle Poster, 2013 Fall Engr333

ENGR 333

Waste vegetable oil (WVO) was chosen by the class as the best fuel source for the Calvin Biofuel Vehicle Project. The class then considered vehicle options and selected a lawnmower to be powered by WVO.

2013 Fall Engr333 Fuel And Facilities Poster, 2013 Fall Engr333

ENGR 333

The objective of the project was to answer the question: “What would it take for Calvin College to operate a biofuel vehicle from campus resources.” The class split into 3 teams:

• Fuel/Feedstock
• Facilities/Infrastructure
• Vehicle

2013 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2013 ENGR333 project focused on production and use of biofuels at Calvin University.

I asked the students “What would it take for Calvin College to operate a biofuel vehicle from campus resources?”

Customer

The customer for this project was Calvin’s Physical Plant director Phil Beezhold.

Exploring Factors Contributing To Injury Severity At Freeway Merging And Diverging Locations In Ohio, Worku Y. Mergia, Deogratias Eustace, Deo Chimba, Maher Butros Qumsiyeh

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Identifying factors that affect crash injury severity and understanding how these factors affect injury severity is critical in planning and implementing highway safety improvement programs. Factors such as driver-related, traffic-related, environment-related and geometric design-related were considered when developing statistical models to predict the effects of these factors on the severity of injuries sustained from motor vehicle crashes at merging and diverging locations. Police-reported crash data at selected freeway merging and diverging areas in the state of Ohio were used for the development of the models. A generalized ordinal logit model also known as partial proportional odds model was applied to …

Project-Risk Management And Decision Analysis In Maritime Maintenance And Repair, Michael C. Plumb, C. Ariel Pinto, Rafael Landaeta, Resit Unal, Thomas Murphy

Engineering Management & Systems Engineering Faculty Publications

The purpose of this paper is to provide insights regarding the implementation of using Project Risk Management (PRM) and Decision Analysis (DA) in managing projects for complex systems such as maritime vessels. The PRM approach apprehends many forms of risk both internal and external within a given project and assists the manager in determining the level of importance of each individual project phase and component to optimize project success. Ship Maintenance and Repair project decision-making requires that risk management and risk analysis techniques be applied in order to guide management in making better decisions to meet ship service life perspective. …

A Simplified Method For Analyzing Factors Contributing To Motorcyclists’ Fatal Injuries In Ohio, Deogratias Eustace, Vamsi Krishna Indupuru

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

The aim of this paper was to analyze traffic crash data by using a simplified method in determining significant factors that increase the risk of a motorcyclist being fatally injured once involved in a motorcycle crash in Ohio. The concept of overrepresentation, which is similar to relative risk, was used in identifying significant variables associated with the elevated risk of a motorcycle crash resulting into a fatality. The overrepresentation factor (ORF) was calculated for each variable of interest. The ORF offers a simple but powerful procedure of determining whether a certain factor significantly occurs more or less frequently in one …

Analysis Of Existing Work-Zone Sign Supports Using Manual For Assessing Safety Hardware Safety Performance Criteria, Jennifer D. Schmidt, Ronald K. Faller, Karla A. Lechtenberg, Dean L. Sicking

Department of Civil and Environmental Engineering: Faculty Publications

Over the years, numerous work-zone, portable sign support systems have been successfully crash tested according to the Test Level 3 safety performance guidelines provided in the National Cooperative Highway Research Program Report 350 and accepted for use along our nation’s highways. For this study, several crashworthy sign support systems were analyzed to predict their safety performance according to the new evaluation criteria provided in the Manual for Assessing Safety Hardware (MASH). More specifically, this analysis was conducted to determine which hardware parameters negatively affect a system’s safety performance. To verify the accuracy of the analysis, eight systems, four with the …