Structures and Materials Commons^™

Experimental Investigation Of Mode-Ii Interlaminar Fatigue Damage In Stitched And Unstitched End-Notched Flexure Carbon Fiber Composites, Madelyn Sloan Berry

Honors Theses

Composite materials are increasingly used in aerospace structures due to their high strength-to-weight ratio, but their susceptibility to interlaminar fatigue damage remains a critical concern, particularly under mode-II shear loading. This study investigates the fatigue behavior of stitched and unstitched quasi-isotropic carbon fiber composite specimens made of SAERTEX Class-75 non-crimp fabrics and Hexcel 1078-1 epoxy via vacuum assisted resin transfer molding. Global fatigue behavior was analyzed using displacement and crack length cycle relationships derived from compliance calibration methods (CCM), while local behavior was examined using digital image correlation (DIC). Unstitched specimens exhibited a single rapid crack growth associated with unstable …

Detecting And Repairing Conflicting Constraints In Co-Trained Physics-Informed Neural Networks For Composite Curing Processes, Cooper J. Evans

Dissertations, Master's Theses and Master's Reports

Composite materials have become a critical component of modern manufacturing, especially in the automotive and aerospace industries. The curing process for these composites has been modeled using a variety of partial differential equations representing the heat transfer and composite curing kinetics. Optimizing the applied temperature profile is critical for maximizing the efficiency and capacity of composite part manufacturers. Constraints must be placed on the inputs and outputs of the model, including but not limited to, the applied temperature profile, part temperature, and final degree of cure. Conflicting sets of constraints are easy to unknowingly impose due to the highly coupled …

Experimental And Theoretical Fracture Analysis Of Rift Manufactured Carbon Fiber-Vinyl Ester Lamina, Daniel Joseph Longo

Theses and Dissertations

This thesis investigates the fracture behavior of unidirectional carbon fiber-vinyl ester (CFVE) laminates manufactured using the Resin Infusion with Flexible Tooling (RIFT) process, a cost-effective alternative to autoclave-based fabrication methods. Composite materials like CFVE are increasingly adopted in high-performance applications due to their high strength-to-weight ratio and corrosion resistance; however, their anisotropic nature presents challenges in predicting crack initiation and propagation. To address this, a comprehensive approach combining experimental testing, finite element modeling (FEM), and classical fracture mechanics was employed. Orthotropic mechanical properties were first determined through tensile and shear tests, providing critical properties for FEM simulations. A series of …

Characterizing Intralaminar Distal Crack And Delamination In Multidirectional Laminates Under Low Velocity Impact: Modeling Approach With Ultrasound Testing Validation, Niildiip Chandraa, Rachel Van Lear, Arief Yudhanto, Yuqing Zhao, David A. Jack, Douglas E. Smith

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multidirectional laminated composites are essential for load-bearing structures, especially under frequent impact loading. While existing modeling techniques simulate various impact damage modes, our understanding of the underlying mechanisms, specifically the initiation and progression of intralaminar distal cracks and interlaminar delamination, needs improvement. Validating these mechanisms is crucial for enhancing modeling accuracy and expediting the design process. In this work, we propose a three-dimensional finite element modeling (3D FEM) approach aimed at elucidating the impact damage mechanisms in multidirectional carbon fiber reinforced polymer (CFRP). Our model incorporates cohesive zone models (CZM) to simulate the behavior of intralaminar cracks at distal points …

Performance Of Multi-Composite Materials With Corrugated And Cell Geometries Under Low-Velocity Impact, Lukas S. Kolbl

Master's Theses

Composite structures have demonstrated great potential to improve mechanical performance in various applications, including ballistics protection. This study demonstrates that the integration of geometrically optimized composites into core-face sheet assemblies provide great impact resistance. The research investigated the performance of two composite manufacturing methods under low-velocity impact through residual strength and damage comparisons. Corrugated core composites were produced with traditional manufacturing methods, namely compression molding, using twelve stacking sequences. These stacking sequences were chosen to represent four laminate groups, where a unique fiber orientation scheme was employed across three laminate thicknesses (6, 8, and 12 layers). In contrast, honeycomb and …

Team F16: Autonomous Research Plane, Andrew Sugamele, Andrew Whitacre, Nicholas Toal, Cole Bushur

Mechanical Engineering

The autonomous research plane is a remote-controlled plane used for both in-flight data collection and to explore new manufacturing methods for Design Build Fly, an engineering club on campus. The club does not have the resources or time to implement data collection for their competition plane, so we built a plane in parallel, following similar rules to mimic the work and schedule that the club would use during their season. We first did research and analysis to determine the structure of the plane, geometry of wings, sizing of the tail, and what airfoil to choose. The manufacturing process included making …

Damage Control Measures In Composites: Focus On Damage Tolerance Of Aerospace Structures, Kais Jribi

Doctoral Dissertations and Master's Theses

Barely Visible Impact Damage (BVID) in composite materials presents a stealthy yet significant risk to structural integrity, particularly challenging due to its elusive nature. The approach adopted here diverges from traditional methodologies, focusing on the novel application of Digital Image Correlation (DIC) to map surface area changes during in-situ Compression After Impact (CAI) tests. This technique allows for an in-depth analysis of planar strains along the x and y axes, shedding light on the material's behavior under stress.

A pivotal advancement lies in developing a method for precisely identifying when BVID-induced delamination recommences. By meticulously analyzing strain pattern deviations along …

Kissing Bond Assessment In Adhesive Bonded Carbon Fiber Reinforced Composites Using Dielectric Spectroscopy, Minhazur Rahman

Mechanical and Aerospace Engineering Dissertations - Archive

The widespread use of fiber-reinforced composites in industries such as space, aviation, automobiles, and construction necessitates the formation of robust composite joints between critical structural components. Although adhesive-bonded joints are superior with improved load distribution and reduced weight, they are often overlooked in favor of bolted joints and mechanical fasteners due to the lack of reliable Non-Destructive Evaluation (NDE) techniques for adhesive-bonded composites. The anisotropic nature of the substrate and the intricate interfacial interactions between the adherend and adhesive material present significant challenges for conventional NDE methods. Moreover, weak adhesive bonds can result from uncontrolled manufacturing parameters, such as accidental …

Interfacial Thermomechanical Behavior Of Hybrid Carbon Fibers, Sriraj Srihari

Doctoral Dissertations and Master's Theses

The carbon fiber/epoxy interface is of great importance in composite design due to its load transfer mechanisms from the weak epoxy to the stronger fiber. Improving the strength of the interface reduces the risk of failure at the interface and improves the load transfer to the fiber. In this study, two types of nano-species ZnO nanowires and nickel-based metal organic frameworks were grown on carbon fibers to improve the interfaces. The interfacial mechanics of the enhanced fibers are evaluated using nanoindentation studies. Composite samples with Aeropoxy matrix and vertically aligned fibers are fabricated for this purpose. A Bruker TI-980 TriboIndenter …

Composite Solid Rocket Motor Case Optimization With Matlab Genetic Algorithm, Aleksandr Breit

Master's Theses

This study utilizes MATLAB genetic algorithm (GA) to perform optimization on a solid rocket motor (SRM) chamber structure. The (SRM) structure is modelled as a cylindrical composite laminate where unidirectional fiber orientations are the primary design variable in the optimization problem formulation. Additional design variables such as chamber length, diameter, and internal pressure are altered along with the ply angles to minimize the safety margin towards a near-zero value and encourage efficient layup design. Classical lamination theory with Tsai-Wu failure criterion are used to calculate ply-level safety margins. A thickness minimization scheme is employed to reduce the ply count from …

Study Of A Carbon Fiber Reinforced Polymer Composite Using A Biobased Polyurethane As A Thermosetting Resin, Teddy Mageto

Electronic Theses & Dissertations

Carbon Fiber Reinforced Polymer composites (CFRP) have garnered increasing interest in recent years especially in the aerospace and automobile industries where they are gradually replacing metals as structural materials. This is owing to their light weight, high strength, high modulus, and excellent strength-to-weight ratio. Polymers are typically used as thermosetting resins in these composites. However, the synthesis of polymers currently is conducted via petrochemical processes which leads to adverse effects on the environment. To this end, in this work a biobased Polyurethane (PU) was used as a thermosetting resin in a CFRP. The biobased PU was synthesized by the reaction …

Post-Consolidation Process For Modifying Microscale And Mesoscale Parameters Of 3d Printed Composite Materials, Arief Yudhanto, Alwaleed Aldhirgham, Eric Feron, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Advancements in additive manufacturing technology (3D printing) have enabled us to fabricate reasonably good parts using continuous fiber-reinforced matrix composites. Unfortunately, most of these 3D-printed composite parts inherently possess a large number of voids originating from the trapped air within and between molten composite beads during the deposition stage. Removing the voids has thus become a key challenge in attempts to apply 3D printed composite parts for fabricating stiff/strong load-bearing structures. Here, we employed a classical process, viz. compression molding, to post-consolidate 3D-printed continuous carbon fiber-reinforced polyamide (CFPA), and to investigate the implications in terms of microscale parameters (void content) …

Surface Preparation Study, Ryan Ferguson

Williams Honors College, Honors Research Projects

This work explores a custom air atmospheric pressure plasma treatment (APPT) machine’s effectiveness in cleaning and chemically activating a CFRP surface. It is explore by implementing water contact angle (WCA) measurements, water-break free (WBF) testing, and adhesive tubular lap-joint (TLJ) tensile testing. An 8x3 test matrix of different machine parameters is defined with the bounding conditions being the machine’s capabilities and industry standard recommendations. Each configuration of the test matrix is explored after treatment at multiple time intervals up to 2 weeks afterwards to gain insight into the outlife of the treatments with the intention of adhesively bonding to the …

Analysis Of After Impact Characteristics And Structural Optimization Of Cfrp Composite Plate, Zhennan He

Doctoral Dissertations and Master's Theses

Low-velocity impact (LVI) on composites may cause Barely Visible Impact Damage (BVID), which is one of the most common damage types and may result in a decrease in strength of the composite. The objectives of this research were (a) to identify the characteristics of a carbon/epoxy composite plate after low-velocity impact, (b) to create a validated model to simulate the impact process and progressive failure, and (c) to perform sizing and shape optimization of the laminate for improving the damage resistance of the plate. As a part of this thesis, composite plates were fabricated using carbon fiber reinforced polymer (CFRP) …

Topology Optimization And Analysis Of Thermal And Mechanical Metamaterials, Lee Alacoque

Doctoral Dissertations and Master's Theses

To take advantage of multi-material additive manufacturing technology using mixtures of metal alloys, a topology optimization framework is developed to synthesize high-strength spatially periodic metamaterials possessing unique thermoelastic properties. A thermal and mechanical stress analysis formulation based on homogenization theory is developed and is used in a regional scaled aggregation stress constraint method, and a method of worst-case stress minimization is also included to efficiently address load uncertainty. It is shown that the two stress-based techniques lead to thermal expansion properties that are highly sensitive to small changes in material distribution and composition. To resolve this issue, a uniform manufacturing …

Peridynamic Approaches For Damage Prediction In Carbon Fiber And Carbon Nanotube Yarn Reinforced Polymer Composites, Forrest E. Baber

Theses and Dissertations

Aerospace structures are increasingly utilizing advanced composites because of their high specific modulus and specific strength. While the introduction of these material systems can dramatically decrease weight, they pose unique certification challenges, often requiring extensive experimental testing in each stage of the design cycle. The expensive and time-consuming nature of experimental testing necessitates the advancement of simulation methodologies to both aid in the certification process and assist in the exploration of the microstructure design space.

Peridynamic (PD) theory, originating from Sandia National Lab’s in the early 2000’s, is a nonlocal continuum-based method that reformulates the equation of motion into an …

Hybrid Structural Composites With Energy Harvesting Capabilities, Simon Furnes

Doctoral Dissertations and Master's Theses

Hybrid materials have received significant interest due to the potential enhancements they provide over traditional materials such as sensing, actuating, energy scavenging, thermal management, and vibration damping. While traditional materials can be utilized for either one of these functions or loadbearing, the hybrid materials are superior as they allow combination of a wide array of functionalities whilst being suitable for load-bearing purposes.

The goal of this thesis is to elucidate the synergistic effects of hybridization of two piezoelectric materials; zinc oxide nanowires (ZnO NWs) and thin film of lead zirconium titanate (PZT) on the mechanical and energy harvesting of beams …

A Comparison Study Of Composite Laminated Plates With Holes Under Tension, Joun S. Kim

Master's Theses

A Comparison Study of Composite Laminated Plates with Holes under Tension

A study was conducted to quantify the accuracy of numerical approximations to deem sufficiency in validating structural composite design, thus minimizing, or even eliminating the need for experimental test. Error values for stress and strain were compared between Finite Element Analysis (FEA) and analytical (Classical Laminated Plate Theory), and FEA and experimental tensile test for two composite plate designs under tension: a cross-ply composite plate design of [(0/90)4]s, and a quasi-isotropic layup design of [02/+45/-45/902]s, each with a single, centered hole of 1/8” diameter, and 1/4" diameter (four sets …

The Effect Of Biocomposite Material In A Composite Structure Under Compression Loading, Benjamin Andrew Sweeney

Master's Theses

While composite structures exhibit exceptional strength and weight saving possibilities for engineering applications, sometimes their overall cost and/or material performance can limit their usage when compared to conventional structural materials. Meanwhile ‘biocomposites’, composite structures consisting of natural fibers (i.e. bamboo fibers), display higher cost efficiency and unique structural benefits such as ‘sustainability’. This analysis will determine if the integration of these two different types of composites are beneficial to the overall structure. Specifically, the structure will consist of a one internal bamboo veneer biocomposite ply; and two external carbon fiber weave composite plies surrounding the bamboo biocomposite. To acquire results …

Effect Of Low Velocity Impact On The Vibrational Behavior Of A Composite Wing, Richard M. De Luna

Master's Theses

Impact strength is one of the most important structural properties for a designer to consider, but it is often the most difficult to quantify or measure. A major concern for composite structures in the field is the effect of foreign objects striking composites because the damage is often undetectable by visual inspection. The objective for this study was to determine the effectiveness of using dynamic testing to identify the existence of damage in a small scale composite wing design. Four different impact locations were tested with three specimens per location for a total of 12 wings manufactured. The different impact …

Low-Velocity Impact Analysis Of Composite Repair Patches Of Different Shapes, Sarvesh Baliga

Doctoral Dissertations and Master's Theses

The area under crack for various structures can be effectively repaired by the use of composite materials. Low velocity impact can cause barely visible damage to the interior structure of laminated composite. These impacts can cause delamination in composite materials. In this study, a Finite Element Analysis was conducted using Abaqus/Explicit and the results of the analysis were compared to the experimental data from literature. E-glass/epoxy composite laminate was subjected to a low velocity impact test. To study the effect of patch repair, a composite patch was applied on a cracked laminate and a low velocity impact was then conducted …

Phased Array Beamsteering In Composite Laminates For Guided Wave Structural Health Monitoring, Peter Osterc

Doctoral Dissertations and Master's Theses

In this study a guided wave phased array beamsteering approach is applied to composite laminates. Current beamsteering algorithms derived for isotropic materials assume omnidirectional wave propagation. Due to inherent anisotropy in composites, guided wave propagation varies with direction and wavefronts no longer have perfect circular shapes.

By examining slowness, velocity and wave curves, as well as amplitude variation with direction for a given composite laminate, the wavefront from a single source can be described as a function of the angle of propagation and distance from origin. Using this approach, a more general delay and sum beamforming algorithm for composite laminates …

An Investigation Into The Properties And Fabrication Methods Of Thermoplastic Composites, Ann E. Livingston-Peters

Master's Theses

As applications for thermoplastic composites increase, the understanding of their properties become more important. Fabrication methods for thermoplastic composites continually improve to match designs specifications. These advanced thermoplastics have begun to show an improvement in mechanical properties over those found in thermoset composites commonly used in industry. Polyaryletherketones (PEK) have high service temperatures, good mechanical properties, and improved processing capabilities compared to thermoplastics used in the past making them important to the aerospace industry. The wide range of types of PEK make them suitable for a variety of applications, but selection of specific chemistries, processing parameters, and composite stack-ups determine …

Validation Of Long-Fiber Thermoplastic Composite Models, Christian A. Vuong, Megan Kinney, Michael Sangid

The Summer Undergraduate Research Fellowship (SURF) Symposium

With increased pressure to reduce energy consumption, long-fiber reinforced thermoplastic composites (LFTs) are of interest to aerospace and automotive industries due to their light weight in combination with other desirable mechanical properties and ease of manufacturing to replace common materials such as aluminum and magnesium. However, the performance of LFTs is highly dependent on microstructural variables such as fiber length and orientation, which are heavily influenced by the manufacturing process. Accurately predicting these factors would allow for more rapid advances in LFTs by reducing the experiments needed for certification and decreasing expenses. While models that serve this purpose exist, the …

The Effect Of A Low-Velocity Impact On The Flexural Strength And Dynamic Response Of Composite Sandwiches With Damage Arrestment Devices, Kodi A. Rider

Master's Theses

Impact strength is one of the most important structural properties for a designer to consider, but is often the most difficult to quantify or measure. A constant concern in the field of composites is the effect of foreign object impact damage because it is often undetectable by visual inspection. An impact can create interlaminar damage that often results in severe reductions in strength and instability of the structure. The main objective of this study is to determine the effectiveness of a damage arrestment device (DAD) on the mechanical behavior of composite sandwiches, following a low-velocity impact. A 7.56-lb_f crosshead …

Modal Analysis Of Composite Structures With Damping Material, Kellie Michelle Tremaine

Master's Theses

The purpose of this study is to develop an analytical solution for modal analysis of actively damped orthotropic composite plates in bending and to verify it with experimental analysis.

The analytical modal analysis solution for composite plate dynamics is derived using Euler theory. This analysis applies to structures with orthotropic lamina of uniform material properties at any lamination angle. The bending-extensional coupling can be neglected for plates that are symmetric or approximately symmetric, which allows an exact solution for natural frequency and mode shape to be obtained. An exact solution can be found for natural vibration and in general.

The …

Feasibility Analysis For Electrically-Powered Hoverboard, Cameron Chan, Jason Cortez, Jay Lopez

Aerospace Engineering

Composite materials are engineered by combining two or more constituent materials with significantly different physical or chemical properties in such a way that the constituents are still distinguishable, and not fully blended. Due to today’s high rising prices of gasoline and aviation fuel costs, many manufacturers have turned to the use of lightweight composites in their designs due to the advantages of the composite material, which include outstanding strength, excellent durability, high heat resistance, and significant weight reduction that the composite material properties hold. The purpose of this project is to design and construct a composite structure for an electrically-powered …

The Effects Of Damage Arrestment Devices In Composite Plate Sandwiches With Fastener Holes, Mark Anderson, Nancy Hung Choy, Lacey Jones, Rita Kourskaya

Aerospace Engineering

Composite materials such as a carbon fiber are used in a variety of new technologies including aircraft, spacecraft, and motor vehicles. Carbon fiber has a high strength to weight ratio, a key advantage over other material options. This report discusses the use of composite damage arrestment devices (DADs) in composite sandwich panels with a foam core. There are three different curing cycles tested for the DADs: pressure only, vacuum only, and vacuum with 1000 lbs of pressure. Using a Tetrahedron Heat Press to cure the composite specimen and an Instron Machine to perform tensile testing, data was collected for each …

The Effects Of A Damage Arrestment Device On The Mechanical Behavior Of Sandwich Composite Beams Under Four-Point Bending, Richard Anthony Davis

Master's Theses

The demand for an insert on composite sandwich structures to aid in the arrestment of face-core delamination is of great need.  This research studies the use of a damage arrestment device (DAD) that connects the carbon fiber face sheets to the foam core to find whether an increase in the structural integrity of the sandwich beam results.  Experimental analysis was employed to test the samples and was verified by a theoretical and finite element approach.

The mechanical properties of LTM45/CF1803 pre-impregnated carbon fiber and Last-A-foam FR 6710 polyvinylchloride foam were experimentally analyzed using ASTM D3039 and ASTM D1621 standards respectively …

Delamination Of Sandwich Composites, Richard Anthony Davis

Aerospace Engineering

The use of shear keys to help stop or inhibit the face-sheet core delamination of sandwich composite beams under monotonic loading was analyzed in Cal Poly’s structural design lab. The composite beams were treated with the same boundary conditions as the ASTM D5528 double cantilever beam bending in which both faces of the beam remain free; one of the faces would have a debonded side and the other would not. An aluminum tab is attached to the top of the specimens and the load is applied there. Each specimen has piezoelectric sensors that are utilized in the detection of delamination …