Space Vehicles Commons^™

Applications Of A Swarm-Behavior Model On Existing Satellite Constellations, Naomi Lee

Discovery Day - Daytona Beach

The scope of this work explores biological swarm behavior and its application to low- and medium-sized Earth orbit satellite constellation systems. Existing constellation structures have predetermined orbits, meaning there is little adaptivity in the spacing and interactions between satellites. This allows for formation disruption by atmospheric perturbations in lower Earth orbit trajectories but can be countered with interactive controls that help with structure stability. This adaptive spacing and control can also be applied in MEO constellations in coverage and positioning optimization. In ‘mimicking’ this swarm behavior in starling murmurations, the separation, alignment, and cohesion flocking behavior of satellite groupings will …

Microgravity Operations: Passive Capture Tool Dock Development, Tyler Mastroianni, Alexander Choinski, David Smith, Matthew Perkins, Kelsey Hunsicker, Jeanelle Ferdinand

Discovery Day - Daytona Beach

The 2026 NASA Micro-g NExT Challenge 2 requests a device that simplifies the stowage of tools during EVAs. EVAs are crucial during missions, but their effectiveness is hindered because of challenging tool management. Our device, Latch Point, is designed to streamline tool stowage, allowing astronauts to secure tools more efficiently and with less physical strain. This will reduce the duration of EVAs, improving mission productivity. This is important because EVAs are expensive due to the complexity of the suits and the training and preparation required of astronauts before they can undergo these types of missions. This new device would reduce …

String-Of-Pearls Measurements Of Supersonic Plasma Jets Using Magnetospheric Multiscale Satellites, Amelia Koth

Discovery Day - Daytona Beach

High-energy supersonic plasma jets form when the solar wind, which is a flow of charged particles from the Sun, slows down as it encounters Earth’s magnetic shield. Occasionally, the solar wind remains at supersonic speeds as it enters this region. This forms plasma jets that propagate toward Earth; these jets can carry strong magnetic fields, drive magnetic reconnection, and potentially initiate substorms that lead to auroral activity.   Previously studied plasma jets occurred when the interplanetary magnetic field (IMF) points southward. In contrast, this study focuses on northward IMF conditions, which are less understood, yet still capable of producing supersonic jets. …

Terramechanics-Based Comparison Of Dem And Crm For Lunar Surface Applications, Nicolas Bonasoro

Discovery Day - Daytona Beach

Understanding how lunar regolith interacts with robotic systems is important for safe surface operations because uncertain terrain conditions can affect rover traversability and lunar lander stability. This work applies terramechanics to two space robotics applications: in-situ cone penetration testing (CPT) for terrain assessment and lunar lander touchdown analysis for evaluating sinkage, force response, and stability. The study compares the Discrete Element Method (DEM), which resolves particle-scale interactions and captures detailed regolith behavior, with the Continuum Representation Method (CRM), which models soil response more efficiently and supports rigid CAD components such as lander footpads, legs, and body geometries. Current CPT results …

Robotic Arm Development For Cone Penetration Testing On The Lunar Surface, Jonah Graff, Derek Zhang

Discovery Day - Daytona Beach

Just as on Earth, future lunar operations will require accurate characterization of surface conditions. On Earth, a proven method for this is Cone Penetration Testing (CPT), which evaluates soil bearing capacity and stratification. This information is vital for lunar operations, including habitat construction, resource extraction, and safe pathfinding. However, traditional CPT systems are designed for human operation and lack autonomy. This project addresses that limitation by developing an autonomous, in-situ terrain characterization system for lunar surfaces. The device is driven by ball-screw actuators powered by stepper motors and controlled through an Arduino Mega, using a combination of metal and 3D-printed …

Feasibility Of High-Throughput Onboard Ai For Mars Rovers Under Solar Constraints, Aashman Gupta

Discovery Day - Daytona Beach

This project evaluates the feasibility of sustained onboard AI autonomy for a solar-powered Mars rover by directly linking solar energy availability to achievable compute performance. While Mars solar irradiance and edge computing performance have been studied independently, no unified framework currently couples surface power generation to autonomy throughput in an experimentally validated manner. The project will begin with a simulation of solar power generation for a 1 m² rover-mounted array across a Martian sol, accounting for seasonal variation, dust opacity, and array configuration (fixed versus sun-tracking). The resulting power profile will then be coupled to representative compute platforms running autonomy …

Magnesium-Enhanced Methane: A Novel Metalized Fuel For Mars Return Missions And Next-Generation Propulsion Systems, Kinga Wysocka

Discovery Day - Daytona Beach

This research investigates magnesium-enhanced methane as a novel metalized fuel concept for high-performance, in-situ resource utilization (ISRU)-compatible rocket propulsion. While methane is a leading candidate for Mars missions due to its producibility via the Sabatier process, its combustion performance is limited by the high activation energy of the initial C–H bond (~4 eV). To address this limitation, density functional theory (DFT) calculations were performed to analyze methane and hydrogen interactions with a Mg(0001) surface. A converged slab model (3×3×4 and 3×3×5) was validated with energy differences below 1 meV per atom for k-point sampling and ~13.99 meV per atom for …

Experimental Design And Comparative Analysis Of Cubesat-Based Reflector Concepts For Future Solar Energy Redirection On Mars, Tatyana Vladislavova Ivanova

Discovery Day - Daytona Beach

Previous research shows that redirecting sunlight with large orbital mirrors could support warming specific regions of Mars by targeting ice deposits and releasing greenhouse gases. Although the concept has strong theoretical support, deploying and adjusting massive rigid reflectors in orbit remains a major technical challenge. This study aims to investigate the impact of using a swarm of small, adjustable CubeSats equipped with different reflector types on the effectiveness of solar energy redirection for Martian surface heating. Through comparison of multiple designs in controlled conditions, this work addresses whether smaller, flexible systems could offer a practical alternative to traditional large mirrors. …

Se(3) Touchdown Dynamics With Multi-Joint Landing Legs And Regolith-Dependent Contact For Autonomous Tip-Over Risk Prediction, Rithika Nagarajan

Discovery Day - Daytona Beach

This project develops an SE(3)-based touchdown dynamics framework to study how lunar landers can remain stable during landing on sloped and uncertain terrain. Safe lunar landing is challenging because uneven load redistribution, slip, and asymmetric sinkage can push the vehicle’s center of mass outside its support polygon, increasing tip-over risk. The purpose of this work is to extend a fixed-leg touchdown model to a multi-joint landing leg system while also examining how varying regolith properties affect landing stability. The method combines coupled rigid-body translation and rotation with per-foot unilateral contact, compliant normal force response, and Coulomb-limited friction to simulate touchdown …

An Energy-Aware Meta-Learning Framework For Real-Time Lunar Rover Localization Via Adaptive Algorithm Selection, Jose Demedeiros, Garrett Seyler

Discovery Day - Daytona Beach

This work proposes an energy-aware meta-learning framework that selects the single most suitable localization algorithm for a lunar rover, per scene, using only monocular imagery and orbital maps. The goal is to achieve sub-meter accuracy while minimizing onboard compute and energy consumption. We assemble a suite of seven lunar-relevant algorithms spanning relative and absolute localization, including monocular ORB-SLAM3, LuVo homography-based visual odometry, Censible cross-view matching with orbital imagery, crater-based methods (LunarNav and ShadowNav), monocular horizon navigation with a DEM, and DROID-SLAM. Relative methods provide incremental motion updates, while absolute methods deliver global pose fixes; an Extended Kalman Filter fuses these …

Gravity Gradient Exploration Satellite, Luke Ritchie, Isaac Rosenthal, Benjamin Mason, Nathaniel O’Hara

Discovery Day - Daytona Beach

The Gravity Gradient Exploration Satellite (GGEOS) is a single-unit CubeSat technology demonstration being developed by a group of four undergraduate aerospace engineering students at Embry-Riddle Aeronautical University. The mission is designed to validate a controlled, motor-driven, semi-rigid space-tether and deployment system. Space tethers offer significant potential for gravity gradient stabilization and propellant-less electrodynamic propulsion, however past missions have frequently failed due to rebound and tangling from their spring-based deployment systems and elastic tethers. GGEOS mitigates these challenges using a semi-rigid, tape-measure-like tether, deployed with a stepper-motor-driven extrusion system enabling slow, controlled deployment and reduced post-deployment problems. The spacecraft architecture utilizes …

Laser-Based Optical Communications For Spacecraft Information Transfer, Ibrahim Arnous

Discovery Day - Daytona Beach

This course-based, in-progress project explores optical communications as a spacecraft subsystem and examines how light-based systems can be used to transmit information in space. As modern missions demand faster and more efficient data transfer, optical communications have emerged as an important area of interest alongside traditional communication methods. The purpose of this project is to study the role of optical communication in spacecraft design, with attention to its principles, advantages, limitations, and broader relevance to future missions. Using a comparative and research-based approach, the project investigates how these systems function, what engineering challenges they introduce, and why they are becoming …

Optimal Integrated Cfd-Gnc Model For Drag-Based Reentry Dynamics, Sebastian Lopez

Doctoral Dissertations and Master's Theses

This research focuses on optimizing the control of a drag-maneuvering, Starship-class re-entry vehicle by closely integrating high-fidelity aerodynamic data derived from Computational Fluid Dynamics (CFD) simulations, specifically using StarCCM+. The aerodynamic models, tailored to the unique geometry of a drag-maneuvering body, are seamlessly incorporated into a guidance, navigation, and control (GNC) framework. This integration enables closed-loop CFD simulations with real-time control feedback, allowing for direct analysis and optimization of vehicle stability, trajectory, and control demands throughout the re-entry process.

Building upon the work of Gaglio and Bevilacqua, this advanced CFD-GNC model introduces high-order aerodynamic effects, such as aerodynamic moments and …

System Integration And Validation Of The Cal Poly Spacecraft Attitude Dynamics Simulator Mk. Iv, Bricen S. Rigby

Master's Theses

The Cal Poly Spacecraft Attitude Dynamics Simulator (SADS) is an ongoing project that seeks to enable the simulation and validation of sensors, actuators, and control logic related to spacecraft attitude control. The SADS platform rests atop a spher- ical air-bearing device which allows for nearly frictionless rotation in all three axes. The orientation of the platform is controlled by four reaction wheels arranged in a pyramidal configuration. Over the past few years, there have been significant updates to the reaction wheel subsystem, as well as requests for a more capable central com- puter. Therefore, a new system architecture for the …

Mars Rover Wheels And Drive, Presley S. Sacavitch, Ryan W. Trevena, Dylan A. Mack, Daniel Hudak

Mechanical Engineering

Cal Poly’s Poly1Rover team, advised by Professor Rich Murray, aims to deploy four student-designed mini-Mars rovers, each equipped with a sample-tube retrieval claw, before 2030. However, the wheels of Poly1Rover’s current 6th generation rover are not ready for deployment to Mars, as they do not utilize space-grade materials, are not optimized for manufacturability, and lack sufficient spoke compliance to absorb landing and high-impact loads. This project will be developed by a team of Mechanical Engineering students at California Polytechnic State University, San Luis Obispo (Cal Poly): Daniel Hudak, Dylan Mack, Presley Sacavitch, and Ryan Trevena. Next Intent is providing funding …

Development Of A Free-Floating Space Robotic Simulator, Truman: Terrestrial Robotic Unit For Multibody Analysis And Navigation, Jackson W. Cordova

Master's Theses

This work describes the development of a 3 Degree-of-Freedom (DOF) robotic manipulator for use on a free-floating planar air-bearing vehicle. The system developed aims to serve as a foundation for future space robotics research at the California Polytechnic State University (Cal Poly)’s Space Robotics Laboratory. Systems doc- umentation describes conceptual operation and architecture of the proposed system: Terrestrial Robotic Unit for Multibody Analysis and Navigation (TRUMAN). The key operation of TRUMAN is to study a self launch maneuver of a free-floating ve- hicle including 4 distinct phases: launch off a fixed rail, coast, reorientation using manipulator motion, and capture of …

Spaceotter: A Floating Spacecraft Simulator Air Bearing Vehicle For Hardware-In-The-Loop Experiments And Research, Alexander Debartolo

Master's Theses

Growing interest in nanosatellites has increased demand for accessible ground-testing methods, which have historically been expensive and restricted. Floating Spacecraft Simulators (FSS), built around Air Bearing Vehicles (ABVs), address this gap by approximating a zero-gravity, friction-minimized environment suitable for testing spacecraft control systems, robotics, and propulsion on the ground.

This thesis presents the design, realization, and initial performance characterization of the Space Optically Tracked Testbed for Experiments and Research (SpaceOTTER) ABV, developed for the Cal Poly Space Robotics Lab. SpaceOTTER is the first step toward emulating the 3 degree of freedom (3-DOF) planar dynamics of a simulated spacecraft and is …

Hamster: Hybrid-Actuated Mobile Spherical Terrain Exploration Rover, Winnie Gao

Master's Theses

The expansion of space exploration to increasingly challenging planetary environments requires mobility systems capable of extreme traversal capabilities and operational reliability. This thesis presents the design, development, and testing of a low-cost Hybrid-Actuated Mobile Spherical Terrain Exploration Rover (HAMSTER) intended for use on a planetary surface exploration mission. HAMSTER uses a pendulum-based actuation method for steering and an actuated internal shaft to propel the vehicle forward. The internal structure includes a two-tiered central case composed of the navigation control module, accelerometer, motor controller, primary DC motor, battery, voltage regulators, Raspberry Pi, pendulum servo motor, and drive shafts. Additive manufacturing through …

Adaptive Artificial Potential Field Guidance And Control For Autonomous Docking With Uncooperative And Unknown Spacecraft, Steven Holmberg

Theses and Dissertations

The increasing demand for on-orbit servicing (OOS), active debris removal (ADR), and space domain awareness (SDA) missions has increased the need for autonomous spacecraft rendezvous and proximity operations (RPO) with uncooperative and unknown targets. Traditional guidance and control methods are typically designed for cooperative systems with known geometry and state information. This work builds on previous research to develop and evaluate an artificial potential field (APF)-based control framework capable of autonomous operation with minimal prior target knowledge and applicability to both relatively static and tumbling spacecraft.

The proposed APF formulation incorporates established safety constructs from cooperative docking systems, including an …

Design And Development Of A Passive Dust Protection System For Lunar Docking Operations, Simon Thengvall

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Lunar docking systems face a unique set of environmental conditions that can create significant challenges for mechanical design. Among these, the abrasive nature of lunar regolith can impair the kinematic function of traditional terrestrial mechanisms as well as contaminate critical spacecraft components such as environmental seals, causing them to fail. For crew-rated docking systems, failure of these systems not only threatens mission success, but also crew safety, so dust protection is crucial for docking components. To address the concerns of regolith intrusion, the Simple External Attachment for Lunar Openings (SEALO) is developed as a key architecture for mechanism evaluation when …

Development Of A Liquid Propellant Rocket Engine With Integrated Water-Based Cooling Jacket, Mauricio Bautista, Jesus Cortes, Christian Lopez, Hugo Robles, Will Owens, Josh Sutton, Jayden Pace, Shelby Enlow

Create@State

This projects describes the development of a liquid rocket engine with a metal casted cooling jacket. We test the system and provide simulation data for the project.

Effect Of Nozzle Pressure Ratio On Thrust And Flow Behavior In A Supersonic De Laval Nozzle, Esha Jain

Doctoral Dissertations and Master's Theses

Supersonic nozzles operate across a range of flow regimes. While an ideally expanded condition yields optimal thrust, practical propulsion systems rarely operate at this design point due to variations in altitude and engine operating conditions. As a result, nozzles frequently operate in off-design conditions. In overexpanded regime, where the exit pressure is lower than the ambient pressure, shock-induced separation may occur within the divergent section of the nozzle, potentially degrading nozzle performance. Understanding the aerodynamic behavior of nozzles operating under off-design conditions is therefore important for improving propulsion system performance and stability. In particular, direct thrust measurements provide a key …

Artificial Intelligence In Human Spaceflight Safety-Critical Systems: A Requirements Framework For Ai-Enabled Computer-Based Control Systems, Liz Bosch

Doctoral Dissertations and Master's Theses

Currently, there is no governing standard that addresses the safe integration of AI into computer-based control systems (CBCS) in human spaceflight. The computer-based control expectations of those safety-critical systems on the International Space Station (ISS) are captured in SSP 50038, Computer-Based Control System Safety Requirements, with one caveat: the standard was not designed with AI applications in mind. SSP 50038 does not cover the probabilistic behavior, opacity, and training-data dependency of modern AI/ML systems. The objectives of this work is to develop an AI taxonomy relevant to safety characteristics (determinism, transparency, data dependency, failure predictability), systematically map AI characteristics against …

The Role Of Optical And Synthetic Aperture Radar Satellites In Military Intelligence, Khalifa Alnaqbi

Student Research Symposium (SRS)

The objective of this paper is to demonstrate that while optical and Synthetic Aperture Radar satellites are the two most powerful remote sensing tools in military intelligence, neither is sufficient on its own. This research aims to articulate their distinct operational roles and argue that their synergistic integration, together with other intelligence assets such as unmanned aerial vehicles, signals intelligence, and human intelligence, is essential for achieving comprehensive situational awareness in modern warfare. To establish this, the paper will first analyze the role of optical satellites in target identification and Synthetic Aperture Radar satellites in persistent detection and monitoring, detailing …

A Scalable Iteration Of The Horizon Simulation Framework Using Multithreading Techniques, Jason E. Beals

Master's Theses

The Horizon Simulation Framework (HSF) occupies a unique space in the modern aerospace modeling landscape, enabling flexible, modular modeling of mission-level agent behavior through an object-oriented, hierarchical design. HSF's hallmark breadth-first search scheduling algorithm explores a "multiverse" of possible mission execution pathways, enabling exhaustive evaluation of schedule combinations against user-defined heuristics.

As aerospace systems become increasingly complex, HSF faces critical challenges in establishing verifiable, deterministic behavior. The framework's core scheduling algorithm had not undergone systematic validation, leaving questions about temporal consistency, state management correctness, and reproducibility across different program executions. Furthermore, the exponential growth of schedule combinations creates computational bottlenecks …

Set-Theoretic Reachability-Informed Model Predictive Control For Mechanical And Aerospace Systems, Jinaykumar Nitinkumar Patel

Mechanical and Aerospace Engineering Dissertations

Modern mechanical and aerospace systems increasingly operate autonomously in environments characterized by nonlinear dynamics, uncertainty, and safety constraints. In these settings, estimation and control methods based on nominal models and single-point trajectory predictions are usually insufficient to ensure safe and reliable operation. This dissertation uses a set-theoretic perspective, in which the system state, uncertainty, and admissible behavior are described by sets instead of point estimates. The key question is not only what the state is, but what set of states remains consistent with the dynamics, disturbances, control limits, and available measurements. This provides bounded descriptions of uncertainty and supports control …

Students For The Exploration And Development Of Space (Seds) Air Brake Subsystem: High-Altitude Autonomous Apogee Modulator System For High-Powered Rockets (Haamshr), Camden J. Maclean, Matthew Wharton, Nick Revis, Colin Guido

Honors Theses and Capstones

The objective of this project was to research, design, fabricate, and analyze an autonomous apogee modulation air brake system for the University of New Hampshire (UNH) Students for Exploration and Development of Space (SEDS) high-powered rocket as competitors in the Friends of Amateur Rocketry – Oxidizers Uninhibited Tournament (FAR-OUT) competition.

This air brake system would be developed with considerations for full autonomy, structural reliability, and repeatable deployment. The design would also be easily integrated into the existing high-powered rocket airframe and mechanically simple to increase reliability and practical functionality. The final design would be evaluated using finite element analysis simulation …

A Computational Approach To Graduated Centrifuge Profiles For Partial Gravity Planetary Environments, Cabell W. Jones

Mechanical & Aerospace Engineering Faculty Publications

Missions such as NASA’s Artemis and SpaceX’s Starship aspire towards creating permanent settlements beyond Earth. In order to achieve this goal, it must be considered that the gravity present on planetary surfaces such as the Moon (0.165 g) and Mars (0.378 g) may be insufficient to support human physiology for long term habitation. On near-Earth missions, issues such as muscular atrophy, neuro-ocular changes, cardiopulmonary variations, and bone mineral density loss have been observed proportional to the duration spent in microgravity. Further studies have suggested that the severity of these conditions scales linearly with decreasing gravity, meaning that astronaut health can …

Multiphysics Transport In Porous Thermal Protection Systems: Experimental Characterization Of Gas Permeability And Radiative Properties, Yejajul Hakim

Theses and Dissertations--Mechanical and Aerospace Engineering

Porous thermal protection systems (TPS) used in hypersonic vehicles exhibit coupled gas and radiative transport across multiple regimes and length scales. Accurate performance prediction requires reliable characterization of permeability, slip-flow behavior, and radiative transport properties, particularly for low-permeability and charred materials where existing data are limited. This dissertation presents experimental methods for characterizing multiphysics transport in porous TPS materials. A modular flow system was developed to measure permeability and slip behavior in both virgin and charred materials under relevant environments. A transient pressure decay method enables accurate permeability estimation in low-permeability regimes and provides insight into effective pore structure. Results …

Constrained Dynamics Of Rapid Orbit Motion Emulator (Rome) Using Udwadia-Kalaba Approach, Keanu Brayman

Honors Undergraduate Theses

The Rapid Orbit Motion Emulator (ROME) is designed to be a hardware-in-the-loop (HIL) testbed for orbital control algorithms. It consists of a four-wheeled ground vehicle and a six-degree-of-freedom robotic manipulator. This work investigates the use of optimal control to execute orbital trajectories on ROME using the Udwadia-Kalaba (UK) formulation to model the system dynamics. The UK formulation is a novel method to derive equations of motion for constrained systems. Unlike traditional approaches, the UK approach can be applied directly to any constrained dynamical system. This project utilizes the UK approach to derive dynamics with trajectory following constraints for the ROME …