Space Vehicles Commons^™

Development Of User Interface And Testing Harness, Jacob Amezquita, William Albertini

College of Engineering Summer Undergraduate Research Program

No abstract provided.

Rigid Body Constrained Motion Optimization And Control On Lie Groups And Their Tangent Bundles, Brennan S. Mccann

Doctoral Dissertations and Master's Theses

Rigid body motion requires formulations where rotational and translational motion are accounted for appropriately. Two Lie groups, the special orthogonal group SO(3) and the space of quaternions H, are commonly used to represent attitude. When considering rigid body pose, that is spacecraft position and attitude, the special Euclidean group SE(3) and the space of dual quaternions DH are frequently utilized. All these groups are Lie groups and Riemannian manifolds, and these identifications have profound implications for dynamics and controls. The trajectory optimization and optimal control problem on Riemannian manifolds presents significant opportunities for theoretical development. Riemannian optimization is an attractive …

Skyqube V2, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "SkyQube V2" from August 19, 2023.

Trajectory Design Optimization Using Coupled Radial Basis Functions (Crbfs), Kyler Roy

Electronic Theses and Dissertations, 2020-2023

Optimal trajectory design has been extensively studied across multiple disciplines adopting different techniques for implementation and execution. It has been utilized in past space trajectory missions to either optimize the amount of fuel spent or minimize the time of flight to meet mission requirements. Coupled Radial Basis Functions (CRBFs) are a new way to solve these optimal control problems, and this thesis applies CRBFs to spacecraft trajectory optimization design problems. CRBFs are real-valued radial basis functions (RBFs) that utilize a conical spline while also not being affected by the value of the shape parameter. The CRBF approach is applied to …

Gas Permeability Of 3d Stitched Composites For Cryogenic Applications, Shuvam Saha

Theses and Dissertations

This research aims to investigate the influence of 3D through-thickness stitching on the gas permeability and transverse microcracking of cryogenically cycled carbon/epoxy composites. 3D through-thickness stitching can be used to improve the interlaminar properties of polymer matrix composites (PMCs) and produce lightweight, unitized structures for cryogenic storage tanks. To fully utilize stitched composite structures for these applications, their inherent gas permeability challenges must be understood. Therefore, in this study, the stitched composites' damage evolution and gas permeability was experimentally characterized under a) pure thermal stress, b) thermal and uniaxial mechanical stress, and c) thermal and biaxial mechanical stress. Helium gas …

The Influence Of Mixing Duct Length And Phase Of Flight On Wall Temperatures Of A Rocket Based Combined Cycle Engine In Ejector And Air-Augmented Modes, Jonathan Grow

Doctoral Dissertations and Master's Theses

Rocket Based Combined Cycle (RBCC) engines have been theorized as a possible means of powering launch vehicles and high-speed atmospheric vehicles. By incorporating aspects of both air-breathing and rocket propulsion, RBCC engines promise up to a 230 % increase in specific impulse over traditional chemical rocket propulsion by entraining a secondary flow of atmospheric air and mixing it with the exhaust of a rocket motor. Students within the Embry-Riddle Future Space Explorers and Developers Society (ERFSEDS) identified a
problem of excessive heating and structural failure of the mixing duct during launch and transonic flight of a student-built flight test vehicle. …

Gyroless Nanosatellite Attitude Determination Using An Array Of Spatially Distributed Accelerometers, Kory J. Haydon

Master's Theses

The low size and budget of typical nanosatellite missions limit the available sensors for attitude estimation. Relatively high noise MEMS gyroscopes often must be employed when accurate knowledge of the spacecraft’s angular velocity is necessary for attitude determination and control. This thesis derived and tested in simulation the “Virtual Gyroscope” algorithm, which replaced a standard gyroscope with an array of spatially distributed accelerometers for a 1U CubeSat mission. A MEMS accelerometer model was developed and validated using Root Allan Variance, and the Virtual Gyroscope was tested both in the open loop configuration and as a replacement for a gyroscope in …

An Online Adaptive Machine Learning Framework For Autonomous Fault Detection, Nolan Coulter

Doctoral Dissertations and Master's Theses

The increasing complexity and autonomy of modern systems, particularly in the aerospace industry, demand robust and adaptive fault detection and health management solutions. The development of a data-driven fault detection system that can adapt to varying conditions and system changes is critical to the performance, safety, and reliability of these systems. This dissertation presents a novel fault detection approach based on the integration of the artificial immune system (AIS) paradigm and Online Support Vector Machines (OSVM). Together, these algorithms create the Artificial Immune System augemented Online Support Vector Machine (AISOSVM).

The AISOSVM framework combines the strengths of the AIS and …

A Systematic Study Into The Design And Utilization Of Burn Wire As A Means Of Tensioning And Releasing Spacecraft Mechanisms Through Applied Joule Heating, Chandler Dye

Mechanical Engineering Undergraduate Honors Theses

The joule heating characteristics of Nichrome burn wires, often used as a thermal cutting device in mechanisms designed to fasten and release CubeSat deployables, are examined in the following thesis. Wires ranging from 0.125 inches to 2 inches long, and diameters of 30 Ga and 40 Ga, are investigated through analytical calculations and thermal simulations based on heat transfer due to joule heating, and through physical circuitry-based experiments. The temperature data is used to generate heating curves to predict the time it takes for Nichrome wires to fail under varying testing parameters. This research aims to catalog a series of …

Nonlinear Dynamics Analysis And Control Of Space Vehicles With Flexible Structures, Marco Fagetti

Doctoral Dissertations and Master's Theses

Space vehicles that implement hardware such as antennas, solar panels, and other extended appendages necessary for their respective missions must consider the nonlinear rotational and vibrational dynamics of these flexible structures. Formulation and analysis of these flexible structures must account for the rigid-flexible coupling present in the system dynamics for stability analysis and control design. The system model is represented by a flexible appendage attached to a central rigid body, where the flexible appendage is modeled as a cantilevered Euler-Bernoulli beam. Discretization techniques, such as the assumed modes method and the finite element method, are used to model the coupled …

Development Of Mirror Flexures For Use In The Muvi Instrument, Colin W. Harrop

Master's Theses

The Miniaturized Ultraviolet Imager (MUVI), is a compact wide field UV imaging instrument in development at UC Berkeley Space Sciences Laboratory and Cal Poly, San Luis Obispo. MUVI is designed to fit in a 2U CubeSat form factor and provide wide field, high resolution images of the ionosphere at far ultraviolet wavelengths. This thesis details the design and analyses of MUVI’s deployable cover mirror mounting flexures. Three different flexure geometries were evaluated, an optimal candidate was determined based on a number of criteria including isolation of vibration and stress to the mirrors, manufacturability and cost. The design of the flexure …

Enabling Lunar Cubesat Missions With The Cubesat System Reference Model, Aaron Phillip Zucherman

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Engineering at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Aaron Phillip Zucherman on March 11, 2023.

Design Of A Miniaturized Cubesat Tt&C Patch Antenna, Thomas A. Butterick

Theses and Dissertations

This effort explored the design of miniaturized rectangular microstrip patch antennas for application as a telemetry, tracking, and control (TT&C) on a CubeSat. The motivation for this research was the Grissom-P CubeSat mission planned by AFIT. The TT&C antenna selected for the mission exceeded the allotted size by over a factor of two. The studies performed included analyses of simply reducing aperture size, altering substrate permittivity, and layered approaches to antenna miniaturization. The primary approach to miniaturization was based on a virtually shorted patch antenna. Other approaches included an edge-shorted, slotted patch and the use of corner truncations for improved …

Concept Of Operations Of Cislunar Mirror Satellites To Provide Augmented Lighting Of Dim Space-Based Objects, Alec E. Cook

Theses and Dissertations

The imaging and inspection of Resident Space Objects (RSOs) is an increasingly important mission as space-faring nations and commercial enterprises alike seek to develop means to repair and refuel spacecraft, as well as de-orbit RSOs to reduce orbital debris. Lighting conditions are not always advantageous for an imaging/inspection or repair/refuel spacecraft; therefore, the use of mirror spacecraft to reflect solar energy is proposed to illuminate dimly lit RSOs. The present research investigates the efficacy of space-based reflectors at examining spacecraft in the cislunar environment. Specific assessments include target spacecraft in geosynchronous Earth orbit and periodic orbits around selected Lagrange points, …

Skyqube: Developing Tools For Stem Education Focusing On Space System Engineering, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "SkyQube: Developing Tools for STEM Education Focusing on Space System Engineering" from January 11, 2023.

Characterizing Air Plasma Sprayed Aluminum Oxide Coatings For The Protection Of Structures In Lunar Environments, Perla Latorre Suarez

Electronic Theses and Dissertations, 2020-2023

Wear-resistant ceramic and ceramic composite coatings are significant to provide durability and support long-duration missions to the moon's surface for rovers, landers, robotic systems, habitats, and many other components. On the Lunar surface, structural components are continuously exposed to lunar dust projectiles that can cause protective coating delamination around the affected area, of protective coatings and this may not be physically visible. Ceramic coatings, composed of alumina, present excellent resistance to different types of wear due to their high strength and hardness as well as the ability to protect structural components from regolith impacts, wear, and abrasive damage. Air Plasma …

Efficacy, Durability And Design Of A Bucket Wheel Excavator For Icy Lunar Regolith, Austin Lohsandt

Electronic Theses and Dissertations

This research project focused on the design and testing of a prototype bucket wheel excavator developed for NASA's Break the Ice Lunar Challenge, which sought innovative ideas for lunar excavation. Several attempts have been made by other universities and private industries to create systems that can successfully excavate simulated frozen regolith, however, few have been successful. The chosen excavation technology employed a bucket wheel concept inspired by large open-pit mining machines, modified to incorporate grinding nubs for pulverizing lunar simulant material. The goals included proving the viability of a bucket wheel excavator for lunar excavation, exploring grinding nubs, conducting durability …

Nusat I Project, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "NUSAT I Project" from 2023.

Experimental Validation Of Inertia Parameters And Attitude Estimation Of Uncooperative Space Targets Using Solid State Lidar, Alessia Nocerino, Roberto Opromolla, Giancarmine Fasano, Michele Grassi, Spencer John, Hancheol Cho, Riccardo Bevilacqua

Student Works

This paper presents an experimental activity aimed at assessing performance of techniques for inertia and attitude parameters estimation of an uncooperative but known space target. The adopted experimental set-up includes a scaled-down 3D printed satellite mock-up, a spherical air bearing and a low-cost solid-state LIDAR. The experimental facility also comprises a motion capture system to obtain a benchmark of the pose (position and attitude) parameters and an ad-hoc designed passive balancing system to keep the centre of mass as close as possible to the centre of rotation. The LIDAR-based 3D point clouds, collected while the target rotates on the spherical …

Dual Quaternion Relative Dynamics For Gravity Recovery Missions, Ryan Kinzie, Riccardo Bevilacqua, Seo Dongeun

Student Works

A dual quaternion modeling approach is compared to traditional modeling methods for formation flying spacecraft utilized for gravity recovery missions. A modeling method that has traditionally been used for gravity recovery missions is presented which models the motion of two formation flying spacecraft and a test mass. This is followed by the dual quaternion-based formulation for the equations of motion of the twelve degree-of-freedom coupled relative dynamics of formation flying spacecraft and a test mass. Lastly, utilizing data products from the Gravity Recovery and Climate Experiment Follow-On mission, a comparison of these two modeling methods is presented which proves the …

Solar Sailing Adaptive Control Using Integral Concurrent Learning For Solar Flux Estimation, Luis Enrique Mendoza Zambrano, Riccardo Bevilacqua

Student Works

In the interest of exploiting natural forces for propellant-less spacecraft missions, this investigation proposes an adaptive control strategy to account for unknown parameters in the dynamic modeling of a reflectivity-controlled solar sail spacecraft. A Lyapunov-based control law along with integral concurrent learning is suggested to accomplish and prove global exponential tracking of the estimated parameters and states of interest, without satisfying the common persistence of excitation condition, which in most nonlinear systems cannot be guaranteed a priori. This involves estimating the solar flux or irradiance from the Sun to account for uncertainty and variation over time in this value. To …

Optimal Path Planning For Aerial Robots Using Genetic Algorithm, Anna Puigvert I Juan

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents a path optimization solution for a robot in two different constrained 3-dimensional (3D) environments. The robot is required to travel from its current position to a goal position following minimum cost paths (optimal paths). The first environment has 3D obstacles that interfere with the robot’s path. The path cost for this environment accounts for the minimum distance traveled by the robot from the start to the goal position while avoiding obstacles. The second environment is the atmosphere of Venus, specifically a flyable region of this atmosphere with characteristics similar to Earth’s. This environment has strong westward winds …

Media Streaming In A High-Rate Delay Tolerant Network, Kyle Vernyi

Williams Honors College, Honors Research Projects

Audio and video streaming across delay tolerant networks are relatively new phenomena. During the Apollo 11 mission, video and audio were streamed directly back to Earth using fully analog radios. This streaming capability atrophied over time. The gradual conversion to digital electronics contributed greatly to this. Additionally, 21st century space systems face the new requirement of interconnectedness. Delay Tolerant Networking (DTN) attempts to solve this requirement by uniting traditional point to point links into a robust and dynamic network. However, DTN implementations present bottlenecks due to low performance. High-Rate Delay Tolerant Networking (HDTN) is a performance-optimized DTN implementation. This work …

Space Force Design Project, Emily Greene, Ashton Orosa, Julia Patek, Nathan Doty

Williams Honors College, Honors Research Projects

The objective of our research project is to develop a lab testbed composed of a curved surface to represent a spacecraft hull, a mobile robot equipped with repair tools, and a robotic arm equipped with a laser 3D scanner. This project is part of a larger grant to the University of Akron from Space Force and Air Research Labs. The lab testbed developed in this project will be used to assist in creating and testing a software and algorithm to inspect and repair spacecraft while in orbit. The project will involve researching spacecraft hulls to create an accurate simulation bed, …

Probabilistic Short Term Solar Driver Forecasting With Neural Network Ensembles, Joshua Daniell

Graduate Theses, Dissertations, and Problem Reports (ETD)

Commonly utilized space weather indices and proxies drive predictive models for thermosphere density, directly impacting objects in low-Earth orbit (LEO) by influencing atmospheric drag forces. A set of solar proxies and indices (drivers), F_10.7, S_10.7, M_10.7, and Y_10.7, are created from a mixture of ground based radio observations and satellite instrument data. These solar drivers represent heating in various levels of the thermosphere and are used as inputs by the JB2008 empirical thermosphere density model. The United States Air Force (USAF) operational High Accuracy Satellite Drag Model (HASDM) relies on JB2008, and …

Evaluating System Usability, Workload Suitability, And User Experience Of Game-Based Virtual Reality In Spaceflight Education And Training, Lana Laskey, Joseph R. Keebler

Journal of Aviation/Aerospace Education & Research

Game-based instruction and immersive virtual reality are enhanced pedagogical methods beneficial in training environments involving complex disciplines, ranging from medical applications to construction engineering technology. This study investigated the use of game-based virtual reality (GBVR) when applied to the complex field of spaceflight education and training. As modern society places increasing demand on space-based amenities, the need for proficient satellite operators will also increase, requiring more accessible and advanced training options. Satellite ground control training scenarios, immersed in the GBVR environment, were developed and deployed to university student participants. Multiple validated scales were employed to measure the GBVR system regarding …