Space Vehicles Commons^™

Unstandard Cubesat/Pocketqube/Tubesat Deployers, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Unstandard CubeSat/PocketQube/TubeSat Deployers" from April 23, 2015.

Flying The X-15 And Space Shuttle, Joe H. Engle

ERAU Prescott Aviation History Program

Hear what it was like for Joe H. Engle, USAF/ANG, Ret. to fly both the X-15 and the Space Shuttle. In 1965 Capt. Engle flew the X-15 to 280,600 feet, to become the youngest pilot to qualify as an astronaut and would go on to fly it 15 more times. Selected for NASA space missions, he flew the Space Shuttle “Enterprise” off the top of a modified 747 on glide flight tests. He commanded the orbital test flight of “Columbia” and became the first and only pilot to manually fly an aerospace vehicle from Mach 25 to landing. A remarkable …

Cdtx: Cool Drop Test Experiment, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "CDTX: Cool Drop Test Experiment" from April 7, 2015.

High Powered Composite Payload Fairing Rocket For Deployable Robotics, Markus R. Murdy

Research Horizons Day Posters

No abstract provided.

Into Space @ Morehead, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Into Space @ Morehead" from March 26, 2015.

Modeling Navigation System Performance Of A Satellite-Observing Star Tracker Tightly Integrated With An Inertial Measurement Unit, Scott J. Pierce

Theses and Dissertations

This dissertation evaluates a navigation system using satellite observations from a star tracker tightly-integrated with an inertial measurement unit (IMU) and a barometric altimeter using an extended Kalman filter. The star tracker measurement accuracy of a satellite is derived. Several system configurations are simulated comparing the performance of the estimate with respect to system parameters of the IMU, and star tracker, as well as comparing performance when providing a remote sensor satellite ephemeris error correction. Experimental observations are used to evaluate the model performance. Additionally, power requirements were calculated for a satellite signal operating in imaging bands, such that a …

Low Earth Orbit Satellite Tracking Telescope Network: Collaborative Optical Tracking For Enhanced Space Situational Awareness, Victor A. Salvador

Theses and Dissertations

The Air Force Institute of Technology has spent the last seven years conducting research on orbit identification and object characterization of space objects through the use of commercial-off-the-shelf hardware systems controlled via custom software routines, referred to simply as TeleTrak. Year after year, depending on the research objectives, students have added or modified the system's hardware and software to achieve their individual research objectives. In the last year, due to operating system and software upgrades, TeleTrak became inoperable. Furthermore, due to a lack of student overlap, knowledge of the basic operation of the TeleTrak deteriorated. This research re-establishes the basic …

Navigation Constellation Design Using A Multi-Objective Genetic Algorithm, Heather C. Diniz

Theses and Dissertations

In satellite constellation design, performance and cost of the system drive the design process. The Global Positioning System (GPS) constellation is currently used to provide positioning and timing worldwide. As satellite technology has improved over the years, the cost to develop and maintain the satellites has increased. Using a constellation design tool, it is possible to analyze the tradeoffs of new navigation constellation designs (Pareto fronts) that illustrate the tradeoffs between position dilution of precision (PDOP) and system cost. This thesis utilized Satellite Tool Kit (STK) to calculate PDOP values of navigation constellations, and the Unmanned Spacecraft Cost Model (USCM) …

A Monocular Slam Method To Estimate Relative Pose During Satellite Proximity Operations, Scott J. Kelly

Theses and Dissertations

Automated satellite proximity operations is an increasingly relevant area of mission operations for the US Air Force with potential to significantly enhance space situational awareness (SSA). Simultaneous localization and mapping (SLAM) is a computer vision method of constructing and updating a 3D map while keeping track of the location and orientation of the imaging agent inside the map. The main objective of this research effort is to design a monocular SLAM method customized for the space environment. The method developed in this research will be implemented in an indoor proximity operations simulation laboratory. A run-time analysis is performed, showing near …

A Cubesat Mission For Mapping Spot Beams Of Geostationary Communications Satellites, Jacob A. Lasarge

Theses and Dissertations

As space-rated technologies become more compact and more readily available over time, the concept of accomplishing space missions with smaller nanosatellite-class spacecraft becomes increasingly feasible. This research focuses specifically on a CubeSat mission to assist with radio frequency (RF) domain verification; that of characterizing and mapping K-band spot beams from communications satellites in geostationary orbit. By flying a constellation of CubeSats through the edges of spot beams originating from geostationary communication satellites, the spot beam's coverage area will be characterized. This research conducts a mission feasibility assessment, identifies the principle mission requirements to complete a spot beam mapping CubeSat mission, …

Characterization And Modeling Of A Control Moment Gyroscope, Dylan R. Penn

Theses and Dissertations

The Air Force Research Laboratory (AFRL) is developing a spacecraft simulator that uses Control Moment Gyroscopes (CMGs). Prior to the research herein, the Air Force Institute of Technology (AFIT) designed and built six laboratory-rated CMGs for use on the AFRL spacecraft simulator. The main contributions of this research are in the testing and modeling of a single CMG. Designing, building, and operating spacecraft simulators is time consuming and expensive, but less so than tests with on-orbit spacecraft. Reductions in cost and schedule can be realized by investing in modeling the spacecraft simulator and payload before testing. A model of the …

Design And Test Of An Attitude Determination And Control System For A 6u Cubesat Using Afit's Cubesat Testbed, Michael L. Tibbs

Theses and Dissertations

The design and test of a 6U CubeSat Attitude Determination and Control System (ADCS) are explored to establish single-axis control using AFIT's CubeSat testbed consisting of a Helmholtz cage and hemi-spherical air bearing. The Helmholtz cage produces a near-uniform magnetic field inside the cage while the air bearing provides a near-frictionless surface for ADCS testing. The ADCS testbed includes a four wheel pyramid reaction wheel array (RWA) for actuation and an inertial measurement unit (IMU) for attitude determination. Along with the ADCS hardware, the ADCS testbed also includes an Electrical Power System (EPS) and Command and Data Handling (CDH) for …

Simulation Of Locking Space Truss Deployments For A Large Deployable Sparse Aperture Reflector, Dylan M. Van Dyne

Theses and Dissertations

Large deployable space structures require an inordinate amount of effort to fully design and test on Earth. To aid in the determination of the feasibility of the reflector, a method to simulate the structure's deployment was developed using COMSOL. The simulation model is comprised of a locking hinge truss that constitutes the partial reflector structure. To meet computational and temporal restrictions, the structure is simplified to use simple beams with square cross sections and is meshed to a sufficient accuracy with second order elements. The geometry is modeled in the truss's stowed configuration, with the connecting hinges and applied forces …

Eps & Batteries, Jeff Kruth

Robert "Bob" Twiggs STEM Education Collection

Notes written by Jeff Kruth on "EPS & Batteries" from March 12, 2015.

A Contribution Toward Better Understanding Of Overbanking Tendency In Fixed-Wing Aircraft, Nihad E. Daidzic

Journal of Aviation Technology and Engineering

The phenomenon of overbanking tendency for a rigid-body, fixed-wing aircraft is investigated. Overbanking tendency is defined as a spontaneous, unbalanced rolling moment that keeps increasing an airplane’s bank angle in steep turns and must be arrested by opposite aileron action. As stated by the Federal Aviation Administration, the overbanking tendency may lead to a loss of control, especially in instrument meteorological conditions. It was found in this study that the speed differential over wing halves in horizontal turns indeed creates a rolling moment that achieves maximum values for bank angles between 45 and 55 degrees. However, this induced rolling moment …

Waste And Duplication In Nasa Programs: The Need To Enhance U.S. Space Program Efficiency, Bert Chapman

Libraries Faculty and Staff Scholarship and Research

The U.S. Government faces acute budgetary deficits and national debt problems in the Obama Administration. These problems have been brought about by decades of unsustainable government spending affecting all agencies including the National Aeronautics and Space Administration. (NASA). An outgrowth of this fiscal profligacy is the presence of wasteful and duplicative programs within NASA that prevent this agency from achieving its space science and human spaceflight objectives. These problems occur due to mismanagement of these programs from NASA and the creation of these programs by the U.S. Congress and congressional committees. This occurs because congressional appropriators tend to be more …

Energy Use & Generation, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Energy Use & Generation" from January 19, 2015.

Suborbital Spaceflight: A Student Team’S Plan To Send A Rocket To Space, Bryce Chanes, William Carpenter, Julio Benavides, Matthew Haslam, Brenda Haven

Aviation / Aeronautics / Aerospace International Research Conference

The Eagle Space Flight Team was created with the goal of becoming the first undergraduate team to design, build, and launch a rocket capable of suborbital spaceflight. In order to achieve this goal, the team will have to design a rocket capable of atmospheric flight at speeds over Mach 5 and launch it on one of the largest amateur rocket motors ever made. Over the next three years, the team will progress towards accomplishing this feat through a series of incremental test flights. Before the space flight, the team will build three sub-scale rockets designed to reach altitudes of 30,000’, …

Numerical Investigation On Charring Ablator Geometric Effects: Study Of Stardust Sample Return Capsule Heat Shield, Haoyue Weng, Alexandre Martin

Mechanical Engineering Faculty Publications

Sample geometry is very influential in small charring ablative articles where 1D assumption might not be accurate. In heat shield design, 1D is often assumed since the nose radius is much larger than the thickness of charring. Whether the 1D assumption is valid for the heat shield is unknown. Therefore, the geometric effects of Stardust sample return capsule heat shield are numerically studied using a material response program. The developed computer program models material charring, conductive heat transfer, surface energy balance, pyrolysis gas transport and orthotropic material properties in 3D Cartesian coordinates. Simulation results show that the centerline temperatures predicted …

Deposition Thickness Modeling And Parameter Identification For Spray Assisted Vacuum Filtration Process In Additive Manufacturing, August Mark

Electronic Theses and Dissertations

To enhance mechanical and/or electrical properties of composite materials used in additive manufacturing, nanoparticles are often time deposited to form nanocomposite layers. To customize the mechanical and/or electrical properties, the thickness of such nanocomposite layers must be precisely controlled. A thickness model of filter cakes created through a spray assisted vacuum filtration is presented in this paper, to enable the development of advanced thickness controllers. The mass transfer dynamics in the spray atomization and vacuum filtration are studied for the mass of solid particles and mass of water in differential areas, and then the thickness of a filter cake is …

Nusat I Participant Photographs, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs of the participants involved with the NUSat I program from January 3, 2013.

Cubesat Remote Data & Comms Transponders 145.825 Mhz, Bob Bruninga, Mirek Kasal, Mike Ruprecht

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Bob Bruninga, Mirek Kasal, and Mike Ruprecht titled "Cubesat Remote Data & Comms Transponders 145.825 MHz" from October 16, 2015.

Cubesat Wakes In The Earth’S Ionosphere, Robert M. Albarran Ii

Doctoral Dissertations and Master's Theses

Space exploration is currently being revolutionized by the advent of the CubeSat: 10cm cubed satellites that typically deploy in constellations for less than $100,000. Spacecraft instrumentation design must be redefined to abide by the compact CubeSat payload. Furthermore, the CubeSat dimension must be considered with respect to characteristic length scales of the space plasma environment, namely, the Debye length. Although spacecraft-plasma interactions- surface charging, plasma sheaths and wakes- have been well-studied for larger satellites, they are less understood for CubeSats.

The Dynamic Ionosphere CubeSat Experiment (DICE) is a 1.5U CubeSat which recently ended its mission. DICE carried two fixed-bias Langmuir …