Space Vehicles Commons^™

Design Of Shape-Conforming Nosecone For Optimal Fluid Flow From Transonic To Supersonic Range, Anna Tombazzi

Williams Honors College, Honors Research Projects

Modern flight vehicles, such as rockets, missiles, and airplanes, experience a force caused by forebody wave drag during the flight. This drag force is induced when the frontal point of each vehicle breaks the pressure wave during flight. Efforts to reduce this wave drag force to improve flight efficiency include modifying the nosecone profile of the flight vehicles to lower the drag force.

This project revolved around creating a design to make the transformation of nosecone shapes from a ¾ Parabolic profile to a ½ Power Series profile possible, mid-flight. Using a novel nosecone assembly, shape memory alloys (SMAs) and …

Phased Helical Antenna Array For Cubesat Application, Kameron Lacalli

Undergraduate Honors Theses

CubeSats communication links are typically slow due to their power and size restrictions. However, a low power, high speed down link connection can allow for greater data collection and relaying, pushing the capability of 1U CubeSats beyond what is traditionally thought possible. Investigated here is the feasibility of a 11 Mb/s down link connection on a 1U CubeSat, accomplished via 2x2 helical antenna phased array operating on the 802.11 standard. Using a phased array also allows for beam steering to secure connection with the ground station when the on board ADCS may not provide precise pointing capability of the CubeSat, …

Spacecraft Charging Current Balance Model Applied To High Voltage Solar Array Operations, Emily M. Willis, Maria Z A Pour

Von Braun Symposium Student Posters

No abstract provided.

Small Satellite Noncommutative Rotation Sequence Attitude Control Using Piezoelectric Actuators, Joshua L. Evans

Theses and Dissertations--Electrical and Computer Engineering

Attitude control remains one of the top engineering challenges faced by small satellite mission planning and design. Conventional methods for attitude control include propulsion, reaction wheels, magnetic torque coils, and passive stabilization mechanisms, such as permanent magnets that align with planetary magnetic fields. Drawbacks of these conventional attitude control methods for small satellites include size, power consumption, dependence on external magnetic fields, and lack of full control authority. This research investigates an alternative, novel approach to attitude-control method for small satellites, utilizing the noncommutative property of rigid body rotation sequences. Piezoelectric bimorph actuators are used to induce sinusoidal small-amplitude satellite …

Control Of A Fuel Cell Based Autonomous Electric Power System For An Aerospace Vehicle, Roshini S. Ashok

Von Braun Symposium Student Posters

No abstract provided.

The Study Of Electrostatic And Magnetostatic Active Space Radiation Shielding For Deep Space Missions, Leroy A. Fung

Electrical & Computer Engineering Theses & Dissertations

A goal of the National Aeronautics and Space Administration (NASA) has been to develop technologies that will enable deep space explorations. Such missions include a prolonged stay on the Moon and the ability to sustain a long duration of travel time to Mars and beyond. Long-term human exposures to radiation are a crucial concern. Recent research has taken focus on active and passive shielding methods as a way of eliminating the hazard posed by radiation particles. Passive shielding involves the use of materials that has the ability to withstand radiation particles and reduce the dose by stopping or slowing the …

Assessment For Completion Of Cp7 Integration With Revision 6 Avionics, Daniel Jennings

Electrical Engineering

he purpose of this project is the continuation of the CP7 CubeSat project, analysis for integration with new Avionics Systems, and to leave behind instruction for future work for completion of the satellite. CP7 is a satellite in development to support a mechanical and electrical system to experiment on particle damping in micro-gravity. The completion of this satellite needs to be prioritized more than it has been by the PolySat team to honor our work with Northrop Grumman, who have been supportive and helpful throughout the process. This work seeks to aid in the completion of this satellite, so that …

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

An Attitude Determination System With Mems Gyroscope Drift Compensation For Small Satellites, Maxwell Bezold

Theses and Dissertations--Electrical and Computer Engineering

This thesis presents the design of an attitude determination system for small satellites that automatically corrects for attitude drift. Existing attitude determination systems suffer from attitude drift due to the integration of noisy rate gyro sensors used to measure the change in attitude. This attitude drift leads to a gradual loss in attitude knowledge, as error between the estimated attitude and the actual attitude increases.

In this thesis a Kalman filter is used to complete sensor fusion which combines sensor observations with a projected attitude based on the dynamics of the satellite. The system proposed in this thesis also utilizes …

Visual Attitude Propagation For Small Satellites, Samir Ahmed Rawashdeh

Theses and Dissertations--Electrical and Computer Engineering

As electronics become smaller and more capable, it has become possible to conduct meaningful and sophisticated satellite missions in a small form factor. However, the capability of small satellites and the range of possible applications are limited by the capabilities of several technologies, including attitude determination and control systems. This dissertation evaluates the use of image-based visual attitude propagation as a compliment or alternative to other attitude determination technologies that are suitable for miniature satellites. The concept lies in using miniature cameras to track image features across frames and extracting the underlying rotation.

The problem of visual attitude propagation as …

Configuration Studies Of Electrostatic And Magnetostatic Active Space Radiation Shielding, Trac K. Nguyen

Electrical & Computer Engineering Theses & Dissertations

Developing successful and optimal solutions for mitigating the hazards of radiation in deep space is critical for the success of deep-space long duration explorations, including mission to the Moon, Mars and beyond. A recent report (Tripathi et al., 2008) had explored the feasibility of using electrostatic shielding in conjunction with state-of-the-art materials shielding technologies.

In this thesis research, we study the active electrostatic shielding strategy and examine a hybrid configuration that utilizes both electrostatic and magnetostatic fields. The main advantages of this system are shown to be: (i) much lower magnetic fields that could be below the thresholds set for …

Reliable Software Updates For On-Orbit Cubesat Satellites, Sean Fitzsimmons

Master's Theses

CubeSat satellites have redefined the standard solution for conducting missions in space due to their unique form factor and cost. The harsh environment of space necessitates examining features that improve satellite robustness and ultimately extend lifetime, which is typical and vital for mission success. The CubeSat development team at Cal Poly, PolySat, has recently redefined its standard avionics platform to support more complex mission capabilities with this robustness in mind. A significant addition was the integration of the Linux operating system, which provides the flexibility to develop much more elaborate protection mechanisms within software, such as support for remote on-orbit …

Design, Fabrication, And Testing Of An Electromagnetic Rail Gun For The Repeated Testing And Simulation Of Orbital Debris Impacts, Jeff Maniglia, Jordan Smiroldo, Alex Westfall, Guy Zohar

Aerospace Engineering

An Electromagnetic Railgun (EMRG) was designed, built, and tested, capable of firing a projectile a 1 gram projectile at 650 m/s muzzle velocity. The EMRG utilizes an injector, a high voltage power supply, a capacitor bank, inductors and rails. The injector fires 2300 psig Nitrogen gas into the system to provide an initial velocity. The high voltage power supply charges the capacitor bank. The capacitor bank discharges the electric potential built up through the projectile while inside the rails in order to create the EMRG’s force. The inductors are used to pulse form the capacitor bank in order to get …

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms.  However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space.  Robust particle damping technology offers a potential solution, driving the need for microgravity characterization.   A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources.  This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

Characterizing The Exhaust Plume Of The Three-Electrode Micro Pulsed Plasma Thrusters, Myeongkyo Seo

Theses and Dissertations

Three-electrode micro-PPTs are a new version of two electrode micro-PPTs devices. Performance predictions and contamination expectations are essential characteristics needed by satellite designers. In order to focus on thruster specific impulse, thrust and efficiency, measuring the exhaust velocity or impulse bit and propellant consumption rate is essential. While this is not always possible to measure directly, focusing on the ejected mass from the PPT provides significant information allowing determination of these performance statistics. Specifically, focusing on exhaust angle distribution and velocity of the exhaust particles is the emphasis of this work. The results show that the three-electrode micro-PPT is more …

Controller Design For Accurate Antenna Pointing Onboard A Spacecraft, Victor M. Barba

Theses and Dissertations

Controller design for a spacecraft mounted flexible antenna is considered. The antenna plant model has a certain degree of uncertainty. Additionally, disturbances from the host spacecraft are transmitted to the antenna and need to be attenuated. The design concept explored herein entails feedforward control to slew the antenna. Feedback control is then used to compensate for plant uncertainty and to reject the disturbance signals. A tight control loop is designed to meet performance specifications while minimizing the control gains. Simulations are conducted to show that the integration of feedforward control action and feedback compensation produces better responses than the implementation …

Reconstructing Spectral Scenes Using Statistical Estimation To Enhance Space Situational Awareness, Travis F. Blake

Theses and Dissertations

A new sensor, the Advanced Electro-Optical System (AEOS) Spectral Imaging Sensor (ASIS) has been developed at the Maui Space Surveillance Complex (MSSC). ASIS is capable of collecting resolved imagery of space objects in 10's-100's of spectral bands while using an adaptive optics system. However, the stringent requirements of collecting ground-based images requires a sensor that induces spectral blurring. Post-processing algorithms to remove this blurring are required to fully exploit these spectral images. This research focuses on developing the reconstruction algorithms, based on proven estimation theories, required to spectrally deblur the images collected from ASIS. Additionally, the research will expand the …

Lightweight In-Plane Actuated Deformable Mirrors For Space Telescopes, Michael J. Shepherd

Theses and Dissertations

This research focused on lightweight, in-plane actuated, deformable mirrors, with the ultimate goal of developing a 20- meter light gathering aperture for space telescopes. The 0.127 meter diameter deformable mirror small scale testbed was modelled infinite elements using MSC.Nastran software and then used as a basis for a quasi-static controller. Experimental tracking of Zernike tip, tilt, and defocus modes was accomplished. The analytical solutions to plate-membrane and beam-string ordinary differential equations were developed. A simplified approach to modelling the axisymmetric cases was also presented. A novel static control strategy, the Modal Transformation Method, was developed to form Zernike surfaces within …

Dual Fine Tracking Control Of A Satellite Laser Communication Uplink, Louis A. Noble

Theses and Dissertations

A dual fine tracking control system (FTCS) is developed for a single aperture optical communication receiver to compensate for high frequency disturbances affecting tracking of two incident laser communication beams. The optical communication receiver resides within a payload module aboard a geosynchronous satellite, while each laser communication transmitter is housed within a module aboard a high altitude unmanned aerial vehicle (UAV). In addition to platform specific disturbances, the impact of atmospheric optical disturbances affecting tracking error are investigated. The system dynamics and FTCS are modeled and evaluated in MATLAB and SIMULINK. An optimal controller is developed to mitigate these disturbances …

Timing Of Increasing Electron Counts From Geosynchronous Orbit To Low Earth Orbit, Kirk M. Olson

Theses and Dissertations

Under certain conditions, high energy electron fluxes can increase over short periods of time in the outer radiation belt and diffuse to low altitudes. Sudden increases of high energy electron densities at low altitudes can drastically damage unsuspecting low-earth-orbit satellites. The progression of electron flux increases from a geosynchronous orbit to low-earth orbit during an electron event is somewhat unknown. If the beginning of electron flux increases at low-earth-orbits could be anticipated, warnings could be issued to space system operators allowing time to take proper measures to protect and minimize satellite damage extending satellite lifetimes and space mission operations. The …

Microdot - A Four-Bit Microcontroller Designed For Distributed Low-End Computing In Satellites, Anthony R. Woodcock

Theses and Dissertations

Many satellites are an integrated collection of sensors and actuators that require dedicated real-time control. For single processor systems, additional sensors require an increase in computing power and speed to provide the multi-tasking capability needed to service each sensor. Faster processors cost more and consume more power, which taxes a satellite's power resources and may lead to shorter satellite lifetimes. An alternative design approach is a distributed network of small and low power microcontrollers designed for space that handle the computing requirements of each individual sensor and actuator. The design of microdot, a four-bit microcontroller for distributed low-end computing, is …

Control Of A Large Space Structure Using Multiple Model Adaptive Estimation And Control Techniques, Gordon C. Griffin Jr.

Theses and Dissertations

A moving bank multiple model adaptive estimator-controller (MMAE-MMAC), based on linear system, quadratic cost, and Gaussian noise (LQG) assumptions, is used to quell unwanted vibrations in a large flexible space structure. The structure, known as the SPace Integrated Controls Experiment, or SPICE, exists at Phillips Laboratory, Kirtland AFB, NM. The structure consists of a large platform and a smaller platform connected by a tripod of flexible legs. The purpose of the control system is to maintain a very precise line-of- sight vector through the center of the spacecraft. Kalman filtering, used to estimate the position and velocity of the bending …