Other Aerospace Engineering Commons^™

Leveraging Information Theory And Ecological Network Analysis To Monitor Communication Networks In A Student Aerospace Team, Christine Sessions

Doctoral Dissertations and Master's Theses

Effective communication is a critical component of successful collaboration in group projects and team settings. However, systematically tracking and analyzing team communications can be challenging, especially in complex, multi-member teams such as those found in the aerospace industry. This paper explores an information-theoretic approach that leverages encoding techniques and graph theory to analyze communication networks within a university’s multi-year, student-led cubesat design project (Project COMET). By utilizing Shannon Entropy as a measure of information flow, encoding communication patterns, and analyzing Ecological Network Analysis parameters, this research aims to understand how an Embry-Riddle Aeronautical University student project team evolves over the …

Aerodynamic And Acoustic Modeling For Evtol Rotor Noise Prediction, Daniella Bezuidenhout, Anastasios S. Lyrintzis, Vladimir V. Golubev

Doctoral Dissertations and Master's Theses

This thesis presents the development and validation of a methodology for predicting total acoustic emissions from a one-fifth scale electric vertical takeoff and landing (eVTOL) rotor in both hover and edgewise flight conditions. The approach couples sectional two-dimensional Reynolds-Averaged Navier-Stokes (2D-RANS) airfoil simulations with rotor loading predictions from the Comprehensive Hierarchical Aeromechanics Rotorcraft Model (CHARM), tonal noise calculations using the acoustic solver PSU-WOPWOP, and broadband noise predictions from the UCD-QuietFly framework. Boundary-layer inputs traditionally obtained from the viscous-inviscid solver, XFOIL, were replaced with higher-fidelity 2D-RANS results from OpenFOAM to better capture low-Reynolds-number flow physics, including laminar-turbulent transition and laminar separation …

Instrumentation And Control Of A Novel Device To Simulate A Hypersonic Environment, Andrew Marcello

Doctoral Dissertations and Master's Theses

The hypersonic flow regime poses several challenges regarding the design of hypersonic vehicles. Among them is the massive energy and economic expense associated with ground- testing evaluation of material responses within this extreme environment. In order to provide a low-cost, rapid option for preliminary material analysis within hypersonic applications, a novel device is under production to replicate this environment on the surface of these materials. This device has been designed to work in conjunction with Argonne National Laboratory (ANL) Advanced Photo Source (APS) synchrotron, to allow for in-situ characterization of ablation and oxidation on the sample surface.

To achieve this, …

Numerical Investigation Of Rotor-Gust Acoustic Interactions Using The Overflow Cfd Solver, Jordan Mills

Doctoral Dissertations and Master's Theses

The rapid expansion of Urban Air Mobility (UAM) necessitates high-fidelity modeling to predict and mitigate the noise signatures of electric vertical take-off and landing (eVTOL) aircraft within dense urban landscapes. A critical unknown in community-noise certification is the aeroacoustic response of rotors to unsteady inflow conditions. This research addresses this gap by investigating the aerodynamic and acoustic behavior of a representative rotor subjected to time-harmonic inflow disturbances. By establishing a robust numerical framework, this thesis quantifies the relationship between periodic atmospheric gusts and their impact on rotor performance, unsteady blade loading, and subsequent sound radiation. The research consists of a …

Unresolved Image Simulation For Space Situational Awareness Applications, Fox Coniglario

Doctoral Dissertations and Master's Theses

The knowledge of what lies in orbit around Earth is at best a guess. Decades of spaceflight, debris buildup, and vehicle collisions have contributed to a large number of objects that are simply not able to be catalogued. Ongoing efforts to catalog debris in orbit have reached limits by conventional measures and as such, research is active in the field of in-orbit space situational awareness. This thesis intends to help fill a hole in the development of such orbital platforms by assisting the development of image processing software pipelines though the simulation of unresolved space imagery. The simulation uses accurate …

Active Measurement Of A Micron-Order Gap Under High-Speed And High-Temperature Conditions, Andrew Becker

Doctoral Dissertations and Master's Theses

The hypersonic regime poses numerous challenges that researchers face in the development of hypersonic flight vehicles. Due to their excellent thermomechanical properties, ultra-high-temperature ceramics (UHTCs) have risen as a promising solution to act as a protective barrier between the harsh environment and surface materials of these flight bodies. The mechanical operation of a portable hypersonic simulation device was developed in-house and tested at Argonne National Laboratories (ANL) to gather in-situ material response of prospective UHTC samples when exposed to a hypersonic regime. An edge detection-based algorithm was developed and used in LabVIEW to monitor the health and operation of the …

High-Fidelity Modeling Of Evtol Rotor Unsteady Aerodynamic And Aeroacoustic Response To Time-Harmonic Gust, Vadim Voropayev

Doctoral Dissertations and Master's Theses

The rapid emergence of Urban Air Mobility (UAM) demands accurate prediction and mitigation of noise generated by electric vertical take-off and landing (eVTOL) aircraft operating in complex urban environments. Among the various noise sources, the aerodynamic and acoustic response of rotors to unsteady inflow represents a major uncertainty in community-noise assessment and certification. This thesis investigates the aerodynamic and aeroacoustic behavior of a representative eVTOL rotor subjected to time-harmonic inflow disturbances, providing a detailed numerical framework to quantify how periodic gusts influence rotor performance, unsteady loading, and sound radiation.

The study employs a three-stage computational methodology using the open-source solver …

Machine Learning Methods For Hypervelocity Fragment Flyout Characterization, Katharine Larsen

Doctoral Dissertations and Master's Theses

Resulting from breakup events, such as collisions and explosions, hypervelocity fragments create potential hazards for both terrestrial and on-orbit environments, such as terrestrial weapons explosions and satellite breakup events, respectively. To avoid unnecessary damage, an accurate understanding or characterization of hypervelocity fragmentation events is vital. Currently, publicly available two-line elements collected from on-orbit breakup events are limited, excluding pre-detonation parent body conditions, such as orientation, and information of smaller fragments. The uncertainty of these datasets varies between each collected set. Therefore, the overall goal of this work is to employ machine learning to estimate distribution characteristics of a space debris …

Physics-Informed Deep Learning For Pilot Parameter Estimation And Pilot-Induced Oscillation Characterization, Stephen A. Brutch

Doctoral Dissertations and Master's Theses

This thesis investigates the issue of loss-of-control in flight which is a driving contributor to fatal aviation accidents. The two main contributors tackled in this research are human pilot error and categories of pilot-induced-oscillations. The primary objective is to develop models that can capture the mathematical parameters that relate to human pilot control under the widely used McRuer Mathematical pilot model. The goal is that if the mathematical parameters that relate to human pilot control can be monitored during flight then the pilot’s input to the control system and pilot-induced-oscillations (PIO) can be monitored during flight to avoid loss-of-control. This …

Ridds: Removal Of Irregular Debris Using Double Nets, Kayann Coote

Doctoral Dissertations and Master's Theses

The quantity of debris in Earth’s orbit is increasing at an alarming rate, and without a sustainable solution, this will detriment the space environment, impacting the future of space travel and space traffic management. While numerous debris removal concepts and designs have been proposed, very few have made it to actual flight tests, and none can remove debris at a fast enough rate to stop debris growth. For debris currently in orbit, most proposed systems are costly on a large scale and cannot adapt to the wide variety of debris shape and geometry and tumbling. The purpose of the proposed …

Modeling Of Rotor Wake Vortex Dynamics And Interactions In Non-Homogenous Vertiport Environments, Garrison P. Shaw

Doctoral Dissertations and Master's Theses

The current research serves to analyze and study the effects ground forces can have on the thrust performance of a propeller in multiple different configurations. The current research utilizes an open source Computational Fluid Dynamics (CFD) software known as OpenFOAM to generate calculate and visualize these runs. The model used for this experiment is a hybrid model that employs both a Unsteady Reynolds-Averaged Navier-Stokes (URANS) and a detached eddy simulation using a hybrid Large Eddy Simulation (LES) via a KomegaSSTDDES model. This model serves to save computational time as well as allow for accurate results. The three cases run are …

Starfish: A Compact, Biomimetic, And Adaptive Shape Memory Alloy Orbital Debris Remover, Katelyn Branaman

Doctoral Dissertations and Master's Theses

This thesis aims to turn the tides on the orbital debris issue through the fabrication and demonstration of a compact, biomimetic, and adaptive shape memory alloy actuated orbital debris remover. The design, referred to as Starfish, is discussed in detail along with its fabrication process and object capture ability. A hard skeleton crafted from PETG was combined with shape memory alloy wires and extension springs to create a biomimetic structure that operates similar to the human hand, capable of gripping a wide range of objects. Relevant simulations were performed and discussed, the iterative fabrication process used to create each component …

Neural Network Models For Generating Synthetic Flight Data, Nathaniel Sisson

Doctoral Dissertations and Master's Theses

Flight test data is a valuable resource used in many aerospace applications. However, procuring a sufficiently large database of flight test data poses several challenges. Nominal flight tests can be expensive and time-consuming and require much post-processing depending on the availability of sensors and the quality of the sensor output. Flight test performed outside of nominal flight conditions, or flight tests in which failures are introduced, add to the inherent risk and danger associated with flight tests. The most popular alternative to flight test, numerical simulations, may fail to fully capture all non-linear behavior. While flight tests will always be …

Nonlinear Dynamics Analysis And Control Of Space Vehicles With Flexible Structures, Marco Fagetti

Doctoral Dissertations and Master's Theses

Space vehicles that implement hardware such as antennas, solar panels, and other extended appendages necessary for their respective missions must consider the nonlinear rotational and vibrational dynamics of these flexible structures. Formulation and analysis of these flexible structures must account for the rigid-flexible coupling present in the system dynamics for stability analysis and control design. The system model is represented by a flexible appendage attached to a central rigid body, where the flexible appendage is modeled as a cantilevered Euler-Bernoulli beam. Discretization techniques, such as the assumed modes method and the finite element method, are used to model the coupled …

Understanding The Structure Of Wing Tip Vortices Of Bio-Inspired Winglets, Greeshma C. Daniel

Doctoral Dissertations and Master's Theses

Bio-inspired wing tip devices were investigated with the goal of improving the fuel efficiency of subsonic aircraft. Particularly, the structure of a bio-inspired winglet design based on bird feathers were tested in a low-speed wind tunnel. Particle image velocimetry (PIV), was used to study the flow field at two planes aft of the wing as the wing tip vortices developed downstream. These were time-dependent, stereoscopic particle image velocimetry (sPIV) measurements carried out at two planes located at 0.7 and 2 chord distances downstream from the wing. The structure of the wingtip vortices was compared and contrasted with that formed over …

Machine Learning To Predict Warhead Fragmentation In-Flight Behavior From Static Data, Katharine Larsen

Doctoral Dissertations and Master's Theses

Accurate characterization of fragment fly-out properties from high-speed warhead detonations is essential for estimation of collateral damage and lethality for a given weapon. Real warhead dynamic detonation tests are rare, costly, and often unrealizable with current technology, leaving fragmentation experiments limited to static arena tests and numerical simulations. Stereoscopic imaging techniques can now provide static arena tests with time-dependent tracks of individual fragments, each with characteristics such as fragment IDs and their respective position vector. Simulation methods can account for the dynamic case but can exclude relevant dynamics experienced in real-life warhead detonations. This research leverages machine learning methodologies to …

Online Pilot Model Parameter Estimation For Loss-Of-Control Prevention In Aircraft Systems, Frederick Schill

Doctoral Dissertations and Master's Theses

A pilot is a highly nonlinear and incredibly complex controller whose responses are difficult to predict. Many accidents have occurred from pilot error before or after failures and almost always after entering areas of the flight envelope considered as Loss-of-Control regimes. If a pilot's inputs to the flight control system can be predicted, then the introduction of dangerous flight conditions can be readily avoided. Avoidance could take the form of a warning indicator or augmentation of the pilot's inputs. The primary difficulty lies in how to actually predict how the pilot will perform in the future.

Methods to solve this …

Optimal Sizing And Control Of Hybrid Rocket Vehicles, Srija Ryakam

Doctoral Dissertations and Master's Theses

In the present work, a genetic algorithm is used to optimize a hybrid rocket engine in order to minimize the propellant required for a specific mission. In a hybrid rocket engine, the mass flow rate of the oxidizer can be throttled to enhance the performance of the rocket. First, an analysis of the internal ballistics and the ascent trajectory has been carried out for different mass flow rates of the oxidizer as a function of time, for a fixed amount of oxidizer, in order to study the effect of throttling. Two equivalent problems are considered: in the first problem the …

Background Flow Influence On Impulsive Jet-Driven Micro Droplet Dispersal, Vaishak Thiruvenkitam

Doctoral Dissertations and Master's Theses

Accurately predicting the airborne spread of infectious diseases is crucial in controlling the COVID­19 pandemic today. Studies have shown the spread of expiratory droplets depends on ambient thermodynamic conditions and flow properties of the jet emitted by the activity. However, the droplet spread in conditions of background flow is not yet comprehensively understood. This study uses the Eulerian­-Lagrangian model with k−ω turbulence modelling to simulate spread of particles and study the factors affecting it in a closed environment with a background flow. Respiratory activities are modeled as a non-­isothermal jet of air with droplets suspended in them in a predetermined …

Active Control Of Coherent Structures In An Axisymmetric Jet, Michael Marques Goncalves

Doctoral Dissertations and Master's Theses

The primary objective of this work is to develop high-fidelity simulation model for jet noise control predictions and quantify the sound reduction when an external source frequency mode excitation is imposed on the jet flow. Whereas passive approaches using mixing devices, such as chevrons, have been shown to reduce low-frequency noise in jet engines, such approaches incur a performance penalty since they result in a reduced thrust. To avoid a performance penalty in reducing jet noise, the current work investigates a open-loop active noise control (ANC) system that utilizes a unsteady microjet actuator on the nozzle lip in the downstream …

Design And Flight-Path Simulation Of A Dynamic-Soaring Uav, Gladston Joseph

Doctoral Dissertations and Master's Theses

We address the development of a dynamic-soaring capable unmanned aerial vehicle (UAV) optimized for long-duration flight with no on-board power consumption. The UAV’s aerodynamic properties are captured with the integration of variable fidelity aerodynamic analyses. In addition to this, a 6 degree-of-freedom flight simulation environment is designed to include the effects of atmospheric wind conditions. A simple flight control system aids in the development of the dynamic soaring maneuver. A modular design paradigm is adopted for the aircraft dynamics model, which makes it conducive to use the same environment to simulate other aircraft models. Multiple wind-shear models are synthesized to …

Adaptive Augmentation Of Non-Minimum Phase Flexible Aerospace Systems, Michael A. Dupuis

Doctoral Dissertations and Master's Theses

This work demonstrates the efficacy of direct adaptive augmentation on a robotic flexible system as an analogue of a large flexible aerospace structure such as a launch vehicle or aircraft. To that end, a robot was constructed as a control system testbed. This robot, named “Penny,” contains the command and data acquisition capabilities necessary to influence and record system state data, including the flex states of its flexible structures. This robot was tested in two configurations, one with a vertically cantilevered flexible beam, and one with a flexible inverted pendulum (a flexible cart-pole system). The physical system was then characterized …