Other Aerospace Engineering Commons^™

Design And Realization Of An Unmanned Aerial Rotorcraft Vehicle Using Pressurized Inflatable Structure, Nirmal Sadasivan

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned aerial rotorcraft vehicles have many military, commercial and civil applications. There is a necessity to advance the performance on several ranges of rotorcraft for using these vehicles successfully in the expanded future roles. A lower flight time, noise disturbance and safety issues remain the key obstacles in increasing the efficiency of the rotorcraft for various applications. This work presents the design and realization of a rotorcraft using pressurized inflatable structure filled with lighter than air gas such as helium or hydrogen to provide lift assistance for the vehicle. Two iterative design procedures were developed for designing the vehicle. One …

Book Review: Fundamentals Of International Aviation, Alan Bender

International Journal of Aviation, Aeronautics, and Aerospace

Not applicable.

The Pocketqube Standard: Issue 1, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A report titled "The PocketQube Standard Issue 1" published on June 7, 2018.

The Design And Implementation Of A Supersonic Indraft Tube Wind Tunnel For The Demonstration Of Supersonic Flows, Daniel Kenneth Johnson

Master's Theses

Historically, the endeavor of scale testing flight vehicles at supersonic Mach numbers, especially for long durations, has required the development of closed-loop wind tunnels, which are extremely expensive both to build and operate due to the high complexity and incredible power required to drive such a system. The intermittent blowdown wind tunnel, indraft tunnel, and shock tunnel have alleviated many of these cost requirements to some degree, whilst facilitating testing at very high Mach numbers and enthalpies; however, these systems require the handling of gases at pressures and temperatures that can be prohibitive for many university settings. The Ludwieg tube …

Nanosatellite Space Experiment, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A report written by Professor Bob Twiggs titled "Nanosatellite Space Experiment" from March 30, 2018.

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Develop Pucp Microlab For Thinsat, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Develop PUCP microlab for ThinSat" from October 17, 2017.

Payloads For Student Thinsat Satellites, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Payloads for Student ThinSat Satellites" from October 2, 2017.

Students Reaching For The Stars Become The Next Generation Of International Leaders, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Students reaching for the stars become the next generation of International Leaders" on September 22, 2017.

Students Reaching For The Stars Become The Next Generation Of International Leaders: Pucp 100 Year Anniversary - Part 1, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Students reaching for the stars become the next generation of International Leaders: PUCP 100 Year Anniversary" from September 22, 2017.

Students Reaching For The Stars Become The Next Generation Of International Leaders: Pucp 100 Year Anniversary - Part 2, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Students reaching for the stars become the next generation of International Leaders: PUCP 100 Year Anniversary" from Saptember 22, 2017.

Tu-Pod: A Cube Satellite (Cubesat) And Tube Satellite Dispenser Produced Via 3d Printing, Successful Launch, Orbit And Dispensing Of Two Tube Satellites, Robert J. Twiggs, Matt Craft, Amin Djamshidpour, Chantal Cappelletti, Ken Biba, Stewart Davis

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Matt Craft, Amin Djamshidpour, Chantal Cappelletti, Bob Twiggs, Ken Biba, and Stewart Davis titled "TU-POD: A Cube Satellite (CubeSat) and Tube Satellite Dispenser Produced via 3D Printing, Successful Launch, Orbit and Dispensing of Two Tube Satellites" from August 6, 2017.

Providing A Unique Stem Education Opportunity With A Five-Day Eleo Mission, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Providing a Unique STEM Education Opportunity with a Five-Day ELEO Mission" from July 18, 2017.

Bringing Space To The Classroom Through Stem Education Providing Extreme Low Earth Orbit Missions Using Thinsats, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

An article written by Bob Twiggs and associates titled "Bringing Space to the Classroom Through STEM Education Providing Extreme Low Earth Orbit Missions Using ThinSats" from July 10, 2017.

Wing Deflection Analysis Of 3d Printed Wind Tunnel Models, Matthew G. Paul

Master's Theses

This work investigates the feasibility of producing small scale, low aerodynamic loading wind tunnel models, using FDM 3D printing methods, that are both structurally and aerodynamically representative in the wind tunnel. To verify the applicability of this approach, a 2.07% scale model of the NASA CRM was produced, whose wings were manufacturing using a Finite Deposition Modeling 3D printer. Experimental data was compared to numerical simulations to determine percent difference in wake distribution and wingtip deflection for multiple configurations.

Numerical simulation data taken in the form of CFD and FEA was used to validate data taken in the wind tunnel …

Hybrid Buoyant Aircraft: Future Stol Aircraft For Interconnectivity Of The Malaysian Islands, Anwar Ul Haque, Waqar Asrar, Ashraf Ali Omar, Erwin Sulaeman, Jaffar Syed Mohamed Ali

Journal of Aviation Technology and Engineering

Hybrid buoyant aircraft are new to the arena of air travel. They have the potential to boost the industry by leveraging new emerging lighter-than-air (LTA) and heavier-than-air (HTA) technologies. Hybrid buoyant aircraft are possible substitutes for jet and turbo-propeller aircraft currently utilized in aviation, and this manuscript is a country-specific (Malaysia) analysis to determine their potential market, assessing the tourism, business, agricultural, and airport transfer needs of such vehicles. A political, economic, social, and technological factors (PEST) analysis was also conducted to determine the impact of PEST parameters on the development of buoyant aircraft and to assess all existing problems …

Low Cost Missions For The Unordinary Innovators, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Low Cost Missions for the Unordinary Innovators" from May 23, 2017.

Flying Simple Experiments In Space, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Flying Simple Experiments in Space" from April 28, 2017.

Providing A Unique Stem Education Opportunity With A Five Day Eleomission, Robert J. Twiggs, Amin Djamshidpour, Matt Craft, Dale Nash, Hank Voss

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Robert Twiggs, Amin Djamshidpour, Matt Craft, Dale Nash, and Hank Voss titled "Providing a Unique STEM Education Opportunity with a Five Day ELEOMission" from April 26, 2017.

Integrating Unmanned Aircraft Operations Into The National Airspace System, Benjamin Cook, Holly Hughes, Kyle Wilkerson, Allison Little

Discovery Day - Prescott

Unmanned Aircraft Systems (UAS) are expected to dominate the National Airspace System (NAS) in the near future. One particular barrier preventing the integration of unmanned aircraft into the NAS is the lack of standardized procedures for distinguishing and communicating with remote UAS operators. In preparation for adopting unmanned flight operations into a complex control system, it is important to identify solutions to effectively control UAS in the NAS. To achieve simultaneous safe manned and unmanned aircraft operations in the NAS, the Joint UAS and ATC Team (JUAT) at Embry-Riddle Aeronautical University (ERAU) are developing a system that could be used …

Decibel Notes, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A class notes on "Decibel Notes" created by Professor Bob Twiggs on February 27, 2017.

Determining Power For A Cubesat, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Determining Power for a CubeSat" from February 3, 2017.

The Effect Of Biocomposite Material In A Composite Structure Under Compression Loading, Benjamin Andrew Sweeney

Master's Theses

While composite structures exhibit exceptional strength and weight saving possibilities for engineering applications, sometimes their overall cost and/or material performance can limit their usage when compared to conventional structural materials. Meanwhile ‘biocomposites’, composite structures consisting of natural fibers (i.e. bamboo fibers), display higher cost efficiency and unique structural benefits such as ‘sustainability’. This analysis will determine if the integration of these two different types of composites are beneficial to the overall structure. Specifically, the structure will consist of a one internal bamboo veneer biocomposite ply; and two external carbon fiber weave composite plies surrounding the bamboo biocomposite. To acquire results …

Reference Slides, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation of "Reference Slides" created by Professor Bob Twiggs from January 18, 2017.

An Exciting Opportunity To Advance Stem Education With Femto-Satellites, Dale Nash

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Dale Nash titled "An Exciting Opportunity to Advance STEM Education with Femto-satellites" from January 16, 2017.

Tu-Pod: Launched From The International Space Station, Amin Djamshidpour, Bob Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs and Amin Djamshidpour titled "TU-POD: Launched from the International Space Station" from January 16, 2017.

Virginia Space Pocketqube Launch Opportunity, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Virginia Space PocketQube Launch Opportunity" from December 1, 2016.

Assessment Of Asymmetric Flight On Solar Uas, Eric Belfield

Master's Theses

An investigation was conducted into the feasibility of using an unconventional flight technique, asymmetric flight, to improve overall efficiency of solar aircraft. In this study, asymmetric flight is defined as steady level flight in a non-wings-level state in- tended to improve solar incidence angle. By manipulating aircraft orientation through roll angle, solar energy collection is improved but aerodynamic efficiency is worsened due to the introduction of additional trim drag. A point performance model was devel- oped to investigate the trade-off between improvement in solar energy collection and additional drag associated with asymmetric flight. A mission model with a focus on …

Want To Be A Space Scientist For All Ages?, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Want to be a Space Scientistfor all ages?" from November 8, 2016.

Space Systems Overview Of Sse -120 Satellites & Space Systems I, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A  PowerPoint presentation created by Professor Bob Twiggs on "Space Systems Overview of SSE -120 Satellites & Space Systems I" on October 27, 2016.