Navigation, Guidance, Control and Dynamics Commons^™

Navigation With Limited Prior Information Using Time Difference Of Arrival Measurements From Signals Of Opportunity, Christopher M. Rondeau

Theses and Dissertations

The Global Positioning System (GPS) provides world-wide availability to high-accuracy navigation and positioning information. However, the threats to GPS are increasing, and many limitations of GPS are being encountered. Simultaneously, systems previously considered as viable backups or supplements to GPS are being shut down. This creates the need for system alternatives. Navigation using signals of opportunity (SoOP) exploits any signal that is available in a given area, regardless of whether or not the original intent of the signal was for navigation. Common techniques to compute a position estimate using SoOP include received signal strength, angle of arrival, time of arrival, …

Modeling Of A Gyro-Stabilized Helicopter Camera System Using Neural Networks, Nicholas Joseph Layshot

Master's Theses

On-board gimbal systems for camera stabilization in helicopters are typically based on linear models. Such models, however, are inaccurate due to system nonlinearities and complexities. As an alternative approach, artificial neural networks can provide a more accurate model of the gimbal system based on their non-linear mapping and generalization capabilities.

This thesis investigates the applications of artificial neural networks to model the inertial characteristics (on the azimuth axis) of the inner gimbal in a gyro-stabilized multi-gimbal system. The neural network is trained with time-domain data obtained from gyro rate sensors of an actual camera system. The network performance is evaluated …

Modeling And Simulation Of Autonomous Thermal Soaring With Horizon Simulation Framework, Zhenhua Li

Master's Theses

A thermal is a column of warm rising air triggered by differential heating on the ground. In recent studies UAVs were programmed to exploit this free atmospheric energy from thermals to improve their range and endurance. Researchers had successfully flown UAVs autonomously with thermal soaring method. Most research involved some form of flight simulation. Improvements to the aircraft and thermal models for simulation purpose would enable researchers to better design their UAVs and explore any potential flaws in their designs. An aircraft simulation with a thermal environment was created in Horizon Simulation Framework, a modeling and verification framework that was …

Hot Air Balloon Navigation, Dustin Blackwell

Aerospace Engineering

This report describes a program used for navigating a hot air balloon.  The program, Balloon_Trip, was written using MATLAB and gives a flight path to follow from a start position to an end position.  Balloon_Trip calculates the flight path by taking in wind conditions and then flying through these different winds so as to steer the hot air balloon.  The program calculates the flight path by taking into consideration at all times how the wind will propel the balloon while it is rising or falling in elevation.  It then takes the most direct and least complicated, if not fastest, …

Fault-Injection Experiment For The Statistical Characterization Of Faults In Avionics Communication System, Amy M. Yates

Electrical & Computer Engineering Theses & Dissertations

Since flight control systems perform safety-critical functions, it is important to understand the possible effects on the closed-loop dynamical system's performance caused by these faults. The purpose of this project is to design the software and hardware needed to add fault-injection and monitoring capabilities to ROBUS-2, a flight communication system. ROBUS-2 is the current version of the fault-tolerant computer communication system used by the Scalable Processor-Independent Design for Enhanced Reliability (SPIDER), a general-purpose fault-tolerant integrated modular architecture (IMA) developed at the NASA Langley Research Center. The major components of SPIDER include processing elements (PEs) to perform calculations, bus interface units …

Orbital Tori Construction Using Trajectory Following Spectral Methods, Ralph E. Bordner Iii

Theses and Dissertations

By assuming the motion of a satellite about the earth’s geopotential mimics the known Kolmogorov-Arnold-Moser (KAM) solution of a lightly perturbed integrable Hamiltonian system, this research focused on applying trajectory following spectral methods to estimate orbital tori from sampled orbital data. From an estimated basis frequency set, orbital data was decomposed into multi-periodic Fourier series, essentially compressing ephemerides for long-term use. Real-world Global Positioning System (GPS) orbital tracks were decomposed and reconstructed with error from as low as few kilometers per coordinate axis over a 10-week span to tens of kilometers per coordinate axis over the same time period, depending …

An Integrity Framework For Image-Based Navigation Systems, Craig D. Larson

Theses and Dissertations

This work first examines fundamental differences between measurement models established for GPS and those of proposed image-based navigation systems. In contrast to single value per satellite GPS pseudorange measurements, image measurements are inherently angle-based and represent pixel coordinate pairs for each mapped target. Thus, in the image-based case, special consideration must be given to the units of the transformations between the states and measurements, and also to the fact that multiple rows of the observation matrix relate to particular error states. An algorithm is developed to instantiate a framework for image-based integrity analogous to that of GPS RAIM. The algorithm …

Interplanetary Gravity Assisted Trajectory Optimizer (Igato), Jason Bryan

Aerospace Engineering

Interplanetary space travel is an extremely complicated endeavor that is severely limited by our current technological advancements. The amount of energy required to transport a spacecraft from one planet to the next, or even further, is extraordinary and in some cases is even impossible given our current propulsive capabilities. Due to these complications, the search for other means of exchanging energy became imperative to future space exploration missions. One particularly powerful method that was discovered, and the most commonly used one, is referred to as planetary gravity assist. In order to plan out multiple gravity assist trajectories, complex and robust …

Autonomous Control Of The Cal Poly Motion Flight Simulator, Andrew M. Anderson

Aerospace Engineering

An autonomous controller for the Cal Poly Motion Flight Simulator was developed such that the simulated Van’s RV-7 flies a standard light aircraft traffic pattern without any human pilot input. First, an autopilot was developed in Simulink to control the aircraft’s altitude, airspeed, and heading independent of each other. The performance of the autopilot has been tested to perform with a response sufficient for precise navigation. A C++ s- function was written as a mission controller that followed a pre-programmed path around a known airport. The aircraft performs a standard left 45 degree entry into the traffic pattern, lands on …

Senior Project: Global Position Determination From Observed Relative Position Of Celestial Bodies, Michael Holmes

Aerospace Engineering

A method was developed to determine the latitude and longitude of an observer based on the observed position of the Moon and several other celestial bodies. The basic principal developed dealt with the proximity of the Moon. Its relative displacement from calculated values was measured using photography by comparison with stars near the Moon. Photographs were taken from a location in San Luis Obispo at Longitude 120°35.9' and Latitude 35°13.3'. The analysis method has determined the location of the observer to a Longitude of 117°43.8'. An additional method located the observer to 36°38.7'N Latitude and 114°47.6'W Longitude.

Applied System Identification For A Four Wheel Reaction Wheel Platform, Seth F. Silva

Master's Theses

Applied System Identification for a Four Wheel Reaction Wheel Platform

By

Seth Franklyn Silva

At the California Polytechnic State University, San Luis Obispo there is a four-wheel reaction wheel pyramidal simulator platform supported by an air-bearing. This simulator has the current capability to measure the wheel speeds and angular velocity of the platform, and with these measurements, the system identification process was used to obtain the mass properties of this simulator. A handling algorithm was developed to allow wireless data acquisition and command to the spacecraft simulator from a “ground” computer allowing the simulator to be free of induced torques …

Adverse Elevator Effect In Landing Flare, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Modeling And Analysis Of Low Earth Orbit Satellite And Ground Station Data Exchange Topology, Ersin Kocoglu

Mechanical & Aerospace Engineering Theses & Dissertations

In order to utilize space effectively, the primary function of satellite control in orbit around the Earth must be accomplished. This controlling process includes two main segments, ground stations serving as the controller units and orbiting satellites as the units to be controlled. This thesis explores a topological data exchange model that contains one satellite and multiple ground stations. The model is implemented in digital computer software. This model has multiple purposes and can be used to simulate satellite passes over ground stations and can also be used to predict communication time and the amount of transferred data. The model …

Global Navigation Satellite System Software Defined Radio, Jason M. Mcginthy

Theses and Dissertations

The GNSS world is quickly growing. The United States’ GPS, the European Union’s Galileo, China’s Compass, and Russia’s GLONASS systems are all developing or modernizing their signals, and there will soon be more navigation satellites in space than ever before. The goal of this research was to develop an initial capability for an AFIT GNSS software receiver. This software receiver is intended to be used for research purposes at the Advanced Navigation Technology (ANT) Center. First a GPS-only software receiver was built. It successfully acquired, tracked, and provided reasonable position estimates. Next, the receiver was successfully modified to acquire and …

Monocular Vision Localization Using A Gimbaled Laser Range Sensor, Don J. Yates

Theses and Dissertations

There have been great advances in recent years in the area of indoor navigation. Many of these new navigation systems rely on digital images to aid an inertial navigation estimates. The Air Force Institute of Technology (AFIT) has been conducting research in this area for a number of years. The image-aiding techniques are centered around tracking stationary features in order to improve inertial navigation estimates. Previous research has used stereo vision systems or terrain constraints with monocular systems to estimate feature locations. While these methods have shown good results, they do have drawbacks. First, as unmanned exploration vehicles become smaller …

Aiding Gps With Additional Satellite Navigation Services, Yasin A. Mutlu

Theses and Dissertations

In modern warfare navigation services are very important. GPS is currently providing service for accurate navigation, except in some areas, especially urban areas, where GPS signals cannot always be tracked by users. In these cases some additional navigation support could be provided by other global navigation satellite systems. If GPS is combined with other navigation systems than the navigation gap will be minor. In this thesis, the effect of combining GPS with other satellite navigation systems, specifically GLONASS, Galileo and Compass, is evaluated in terms of availability and position dilution of precision (PDOP) values. First, satellite constellations are simulated in …

Gravity Gradiometry And Map Matching: An Aid To Aircraft Inertial Navigation Systems, Anthony J. Degregoria

Theses and Dissertations

Inertial navigation systems (INS) offer passive, all-weather, and undeniable navigation information, which military customers often view as especially appealing strengths. Unfortunately, Airmen and engineers still struggle with INS’s drifting position errors, and navigation aids generally detract from INS’s strengths. At this year’s Air, Space, and Cyberspace in the 21st Century Conference, the Chief of Staff of the Air Force identified the Global Positioning System (GPS) as a widely-known and exploitable vulnerability, saying that it’s critical the Joint force reduce GPS dependence. Recent advances provide an opportunity for gravity gradient instruments (GGI), which measure spatial derivatives of the gravity vector, to …

Structural Response Of Slotted Waveguide Antenna Stiffened Structure Components Under Compression, Joseph W. Sabat Jr.

Theses and Dissertations

The Slotted Waveguide Antenna Stiffened Structure (SWASS) is an aircraft system that can provide the capabilities of a stiffened panel skin structure and a slotted waveguide radar antenna simultaneously. The system made from carbon fiber reinforced polymers is designed around a 10 GHz radar frequency in the X-band range and uses a WR-90 waveguide as a baseline for design. The system is designed for integration into fuselage or wing sections of intelligence, surveillance, and reconnaissance (ISR) aircraft and would increase the system performance through the availability of increased area and decreased system weight. Elemental parts of the SWASS structure were …

Attitude Control Of A Satellite Simulator Using Reaction Wheels And A Pid Controller, Ryan E. Snider

Theses and Dissertations

Attitude requirements of a satellite are determined by its mission: telecommunications, optical imagery, and meteorology to name a few. A satellite's ability to orient its mission critical hardware (solar arrays, attitude sensors, etc.), as well as its mission specific payload, is incumbent upon the performance of the satellite's attitude control system (ACS). For a highly accurate ACS and for moderately fast maneuverability, reaction wheels are preferred because they allow continuous and smooth control while inducing the smallest possible disturbance torques. The objective of this research is to design, build, test, and evaluate the performance of a reaction wheel ACS on-board …

Estimating Characteristics Of A Maneuvering Reentry Vehicle Observed By Multiple Sensors, Evan M. Brooks

Theses and Dissertations

Post flight analysis of ballistic missile reentry vehicles is an area of focus for the U.S. Government, especially for those involved in ballistic missile defense. Typically, this analysis incorporates either a model-driven least squares filter or a data-following Kalman filter. The research performed here developed a filter that attempts to integrate the strengths of both filters. A least squares filter operates on observation data collected during exoatmospheric free flight and a Kalman filter is used to analyze data collected lower in the atmosphere, where potential maneuvers could be performed. Additionally, the filter was written to incorporate data from multiple sensors. …

Prototype Development And Dynamic Characterization Of Deployable Cubesat Booms, Grant M. Thomas

Theses and Dissertations

The current barrier to CubeSat proliferation is their lack of utility depth. These small satellites are exceptionally well suited for specific space missions such as space weather observation and other scientific data gathering exploits; however, they are not suited for every mission. The 10cm-cube form factor that gives the CubeSat its unique advantage is also its greatest hindrance. A potential bridge over this gap is the successful integration of deployable booms onto the CubeSat structure. With this research, the Air Force Institute of Technology (AFIT) explored the parameters of deployable tapespring booms using the triangular retractable and collapsible (TRAC) cross- …

Preliminary Electrical Designs For Ctex And Afit Satellite Ground Station, Arthur L. Morse

Theses and Dissertations

This thesis outlines the design of the electrical components for the space-based ChromoTomography Experiment (CTEx). CTEx is the next step in the development of high-speed chromotomography at the Air Force Institute of Technology. The electrical design of the system is challenging due to the large amount of data that is acquired by the imager and the limited resources that is inherent with space-based systems. Additional complication to the design is the need to know the angle of a spinning prism that is in the field of view very precisely for each image. Without this precise measurement any scene that is …

Development Of A Remotely Operated Autonomous Satellite Tracking System, Michael E. Graff

Theses and Dissertations

AFIT is currently developing a capability to remotely and autonomously track LEO satellites using commercial telescopes. Currently, the system is capable of open-loop tracking based on Two-Line Element sets (TLEs) downloaded from NORAD’s space object catalog. The ability to actively track using a closed-loop control system would allow tracking of satellites which deviated from the published TLEs along with providing some information about the object’s new orbital elements. To accomplish closed-loop tracking, the object is imaged by a digital camera connected to a wide field-of-view (WFOV) spotting scope. Software was developed to provide azimuth and elevation inputs in order to …

Artificial Inhomogeneous Tapered Impedance Sheet Characterization And Applications, Jeffrey P. Massman

Theses and Dissertations

The ability to manipulate a complex impedance sheet about a PEC or general dielectric cylinder of arbitrary diameter to control the overall scattering characteristics at particular angles for shielding or scattering applications is presented. It is shown that with the capability to readily control both the real and imaginary components of a percolated lossy film's effective impedance, specific impedance distributions can be obtained to effectively direct the overall nulls in the bistatic scattering pattern. The exact approach only requires negligible truncation error of the matrix solution and can be applied to cylinders of arbitrary size. This approach relies on general …

Disturbance Observer: Design And Flight Test Of A Large Envelope Flight Controller, Donevan A. Rein

Theses and Dissertations

A new flight controller was evaluated through piloted simulation and flight test conducted at the USAF Test Pilot School. The controller, commonly called a disturbance observer, uses inertial sensor feedback routed through a simple control architecture that acts to force the desired response while rejecting sensor noise and atmospheric disturbances. The investigation included both handling qualities testing in the Octonian simulator at the Air Force Research Laboratories Air Vehicle Directorate, and initial flight test conducted as part of a Test Management Project at the USAF TPS. Simulation produced positive results with desired performance throughout a wide flight envelope. In addition, …

Orbit Maneuver For Responsive Coverage Using Electric Propulsion, Timothy S. Hall

Theses and Dissertations

The use of continuous electric propulsion to manipulate a satellite’s orbit offers significant potential for enhancing coverage of a target in ways not previously considered. Elliptical orbits utilizing a very low perigee can facilitate access to the surface and atmosphere of the Earth at sub-ionosphere altitudes while counteracting atmospheric drag forces using continuous electric propulsion. Additionally, in-plane and out-of-plane manipulation of both circular and elliptical orbits can allow for passage of a satellite over a target at a given time. Sustained low perigee orbit was modeled with an initial perigee altitude of 100 km and various apogee altitudes to derive …

Mission Analysis For Multiple Rendezvous Of Near-Earth Asteroids Using Earth Gravity Assist, Uriah J. Tobey

Theses and Dissertations

The Jet Propulsion Laboratory (JPL) catalog of near-Earth objects (NEOs) such as asteroids and comets contains over 6600 asteroids and 150 comets as of February of 2010. This includes over 1000 potentially hazardous asteroids, or objects with orbits that pass close enough to Earth to pose a potential impact threat. The asteroid community believes there are a significant number of objects still undiscovered, which makes finding, tracking, and calculating missions to study these objects an active area of research. This study was based on finding orbit solutions using Earth gravity assist to visit one near-Earth object (NEO) a year for …

System Integration And Attitude Control Of A Low-Cost Spacecraft Attitude Dynamics Simulator, Ryan L. Kinnett

Master's Theses

The CalPoly Spacecraft Attitude Dynamics Simulator mimics the rotational dynamics of a spacecraft in orbit and acts as a testbed for spacecraft attitude control system development and demonstration. Prior to this thesis, the simulator platform and several subsystems had been designed and manufactured, but the total simulator system was not yet capable of closed-loop attitude control. Previous attempts to make the system controllable were primarily mired by data transport performance. Rather than exporting data to an external command computer, the strategy implemented in this thesis relies on a compact computer onboard the simulator platform to handle both attitude control processing …

Adaptive Control Applied To The Cal Poly Spacecraft Attitude Dynamics Simulator, Matthew C. Downs

Master's Theses

The goal of this thesis is to use the Cal Poly Spacecraft Attitude Dynamics Simulator to provide proof of concept of two adaptive control theories developed by former Cal Poly students: Nonlinear Direct Model Reference Adaptive Control and Adaptive Output Feedback Control. The Spacecraft Attitude Dynamics Simulator is a student-built air bearing spacecraft simulator controlled by four reaction wheels in a pyramidal arrangement. Tests were performed to determine the effectiveness of the two adaptive control theories under nominal operating conditions, a “plug-and-play” spacecraft scenario, and under simulated actuator damage. Proof of concept of the adaptive control theories applied to attitude …

Control Law Design And Validation For A Helicopter In-Flight Simulator, Brian T. Fujizawa

Master's Theses

In-flight simulation allows one aircraft to simulate the dynamic response of another aircraft. A control system designed to give RASCAL, a JUH-60A Black Hawk helicopter based at Moffett Field, CA, in-flight simulation capabilities has been designed, optimized and validated in this research. A classical explicit model following control system with a frequency dependent feedback controller was used. The frequency dependent controller allows model following of the attitude in the short term and the velocity in the long term. Controller gains were optimized using a high order, linearized model of UH-60 dynamics. Non-linear simulations of the control laws were performed, first …