Navigation, Guidance, Control and Dynamics Commons^™

Machine Learning For Predictive Energy And Emissions Modeling Of Vehicles And Power Grids In The United States, S M Tanvir Faysal Alam Chowdhoury

Dissertations

The environmental benefits of electric vehicle (EV) adoption depend on more than replacing internal combustion engine vehicles with electric powertrains. EV adoption reshapes electricity demand, interacts with regional generation mixes, and influences travel behavior and congestion, creating a coupled transportation-energy system in which vehicle and power-plant emissions must be evaluated together. This dissertation develops machine-learning frameworks for predicting energy consumption and emissions from vehicles and power grids under rising EV adoption. The first component forecasts grid emissions from EV charging. Using simulation data from NREL's Cambium database, a Prophet-based time-series framework predicts carbon dioxide, nitrous oxide, and methane emission rates …

Global Time-Resolved Measurements Of Inlet/Isolator Unstart Induced By Mass Injection, Andrew N. Bustard, Benjamin L. Bemis, Aaron Marques, Matthew J. Zahr, Thomas J. Juliano

Publications

The inner surface pressure of an axisymmetric inlet/isolator model was measured using anodized-aluminum pressure-sensitive paint (PSP) viewing through cast acrylic. Temperaturesensitive paint was utilized to correct for the PSP’s temperature sensitivity. The model was tested under Mach 5.7 flow at 𝑹𝒆 = 7.1 ×106 /m under conventional noise conditions. Transverse jet injection with jet-to-inlet mass-flow ratios up to 0.8 was used to induce unstart in the inlet/isolator. Background-oriented schlieren visualization of the inlet shocks was collected simultaneously with the PSP to determine when the inlet unstarted. Computational fluid dynamics results were used to determine off-wall flow structures and quantify approach …

Nozzle Erosion Reconstruction Model For Data Analysis In Rocket Engines And Correlation With Chamber Pressure, Ryan J. Thibaudeau, Stephen A. Whitmore

Mechanical and Aerospace Engineering Student Publications and Presentations

Graphite nozzles remain the dominant choice for small hybrid and solid rocket motors operating on laboratory and university budgets, owing to their low cost, ease of machining, and rapid turnaround during iterative design campaigns. These same programs, however, must contend with the fact that graphite erodes through coupled thermochemical and mechanical mechanisms when exposed to the oxidizing species generated by high-energy propellant combustion, and the resulting throat-area growth fundamentally alters the time histories of chamber pressure, thrust, and delivered specific impulse. This paper presents a nozzle-erosion reconstruction model that extracts the time-resolved throat area from coupled thrust and chamber-pressure measurements …

Design And Implementation Of An Embedded Control System For The Cal Poly Spacecraft Attitude Dynamics Simulator, Neil Mahesh Bedagkar

Master's Theses

This thesis presents the development of a cascaded reaction wheel control system for Cal Poly's Spacecraft Attitude Dynamics Simulator. This work considers system architecture, empirical modeling, high-fidelity simulation, embedded firmware, hardware integration, and experimental characterization. In discrete-time simulation, it is shown that nonlinear direct model reference adaptive control (NDMRAC) enables a nonlinear, partially known plant with realistic actuator dynamics to track the response of a canonical second-order transfer function, with settling time within 4.67% and percent overshoot within order of magnitude of the second-order response. In hardware, the feasibility of a cascaded reaction wheel control architecture is experimentally demonstrated, achieving …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

The Pid-Based Three Quadcopter Uavs Formation Control Under External Disturbance, Vo Van An, Trinh Luong Mien

Makara Journal of Technology

This paper presents the design and evaluation of a formation control strategy for three quadcopter UAVs, based on a PID controller in a leader–follower structure, under the influence of external disturbances. Each UAV employs a six-degree of-freedom dynamic model and utilises a cascade PID control architecture, in which the inner control loop stabilises the attitude. In contrast, the outer control loop regulates position and maintains the formation. The PID parameters are tuned using the Ziegler–Nichols method to ensure simple implementation and low computational cost. The performance of the control system is evaluated through simulations in the MATLAB environment for two …

Set-Theoretic Reachability-Informed Model Predictive Control For Mechanical And Aerospace Systems, Jinaykumar Nitinkumar Patel

Mechanical and Aerospace Engineering Dissertations

Modern mechanical and aerospace systems increasingly operate autonomously in environments characterized by nonlinear dynamics, uncertainty, and safety constraints. In these settings, estimation and control methods based on nominal models and single-point trajectory predictions are usually insufficient to ensure safe and reliable operation. This dissertation uses a set-theoretic perspective, in which the system state, uncertainty, and admissible behavior are described by sets instead of point estimates. The key question is not only what the state is, but what set of states remains consistent with the dynamics, disturbances, control limits, and available measurements. This provides bounded descriptions of uncertainty and supports control …

Gaussian Process Regression–Based Uncertainty Quantification For Unmanned Aircraft System Traffic Management And Advanced Air Mobility Applications, Aakarshan Khanal

Mechanical and Aerospace Engineering Dissertations

Uncertainty quantification has gained significant attention in recent years as a research area in dynamical systems. Mathematical representations of the physical system, combined with an understanding of model uncertainties, enable the propagation of uncertainty in temporal space, which allows us to make informed decisions. However, what if the true dynamics of the system is unknown or too complex to define explicitly? In such cases, the system’s behavior can instead be inferred or learned from observed input–output data rather than from an analytical or physics-based model. To this end, this dissertation focuses on developing a data-driven framework for nonparametric dynamics modeling, …

Graph Based Planning With Guarantees, Trazon Tyrik Jimerson

Mechanical Engineering ETDs

This thesis presents two graph-based methods with formal guarantees for motion planning and routing. First, the invariant-set motion planner (ISMP), which uses constraint admissible positive invariant (CAPI) sets of closed-loop dynamics, is adapted for spacecraft attitude planning to avoid moving keep-out zones. Contributions include time bounds for maneuvers via exponential stability, a single-stage reachability graph from one-step backward reachable CAPI sets, and its multi-stage expansion to certify node safety over time. Simulations verify safe attitude control with moving obstacles. Second, we formulate a convex optimization problem over a network for evacuation planning with operational constraints such as helicopter capacity and …

Understanding Policy Transfer Under Decomposition And Coordination: Sequential Reinforcement Learning With Relaxation-Based Feasibility Control, Aannand Lal

All Theses

This thesis investigates how decomposition and coordination (D&C) choices influence exploration, learning, and transfer in reinforcement learning (RL) based design frameworks. A unified methodology is developed to evaluate generality under decomposition and to demonstrate sequential coordination on a representative physical task. The generality study holds the underlying physics constant while varying problem presentation - specifically scalarization weights, objective orientations, and feasibility handling. A train-evaluate matrix is constructed in which each trained policy is assessed across all alternative decompositions. Set-based diagnostics quantify generality through exact-match identity, Jaccard similarity of distinct feasible states, total feasible coverage, and Pareto-front quality. Results show that …

A Discrete-Time Adaptive Sliding Mode Controller For A Multicopter With A Suspended Payload, John Helzer

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis presents a Discrete-time Adaptive Sliding Mode Controller (DASMC) for control of a multicopter with a suspended payload. DASMC is designed to stabilize the multicopter at a desired position while minimizing the load oscillations induced by a significant hanging payload. The proposed DASMC minimizes the need for system-specific parameters like tunable gains and improves robustness to both external disturbances and model uncertainties compared with existing controllers. The controller is designed for direct digital implementation on a variety of multicopter platforms with considerations like discrete-time design, adaptive gain shrinking, and saturation handling. When deployed on a real multicopter in an …

Reconfigurable Python Autopilot Software For Rc Aircraft, Kate Doiron

Honors Theses

No abstract provided.

Autonomous Control Of A Hybrid Unmanned Aerial Towed System On A Moving Platform, Zachary M. Miller

Graduate Theses and Dissertations (2019 - present)

With tethered rotor drones being more popular for aerial surveillance, moving platforms for tethered drones are being researched. However, these systems require constant power to the rotor drones for stabilization. With this difficulty in power consumption, a hybrid drone solution is presented. The hybrid drone is similar to an airplane, with quadcopter motors attached for stabilization and thrust when not moving.

The controller for the hybrid drone was tested and verified in simulation. The simulation of the system was built in Fortran and consists of a driver, a tether, and a hybrid drone. The driver was modeled after a generic …

Campus Navigator: A Mobile App For Seamless University Navigation, Hafsa Mohammed, Ali Rahimzadehfard, Rachab Wilson, Mathias Rossi, Turaj Ashuri, Amir Ali Amiri Moghadam

Symposium of Student Scholars

Navigation services play a big role in everyone’s daily lives, from directing them on new roads to guiding them through buildings. Outdoor navigation services have evolved from physical maps to digital ones like Google Maps for ease of use and accessibility. Upon conducting literature research, the team found that many navigation apps lack clear and accurate instructions for how to navigate university campuses such as Marietta campus. Due to the size of KSU’s Marietta campus and its buildings, effortless navigation has been a common challenge for students, faculty, and visitors alike. Additionally, all buildings are referred to by letters, numbers, …

Simulation-To-Hardware Validation Of Mpc For Binary Thruster 2d Cubesat Control, Aevar Amundinusarson Oefjoerd

Theses and Dissertations--Mechanical and Aerospace Engineering

Small satellites must execute precise, fuel-limited maneuvers under strict actuation and operational constraints. Model Predictive Control (MPC) is a suitable approach because it optimizes future actions while explicitly enforcing these limits. This work evaluates (1) whether MPC can operate in real time using binary (on/off), asymmetric thrusters, and (2) whether a high-fidelity digital twin can be used to tune and validate the controller prior to hardware testing.

An MPC framework was implemented on a planar satellite prototype that floats on air bearings, operates at 16.7 Hz (60 ms period), and uses eight binary thrusters exhibiting up to 13.2% variation in …

Improving Robustness Of Learning-Based Approaches In Autonomous Systems And Engineering Education, Godwyll Aikins

Theses and Dissertations

This dissertation advances the development of robust learning-based approaches across two complementary domains: engineering education and autonomous systems. Through four studies, this research addresses critical challenges in preparing data-proficient engineers and developing reliable autonomous systems that can operate under uncertainty and incomplete information. The engineering education study examines how mechanical and aerospace engineering undergraduates conceptualize and develop data proficiency skills essential for modern engineering practice. Through interviews with 27 students, the research employs the How People Learn framework to analyze student perspectives on information literacy, data interpretation, and computational thinking. The findings inform pedagogical strategies for developing data proficiency in …

F56: Rocket Thrust Vector Control, Ethan Douglas Anderson, Yiming Trent Jia, Sahil Sampat

Mechanical Engineering

This Final Design Review (FDR) report compiles relevant information regarding the Rocket Thrust Vector Control senior project as sponsored by Ethan Anderson from Cal Poly Space Systems (CPSS). Documented in this report is our progress from the months following our Critical Design Review (CDR) completion. This consists of a brief overview of the design our thrust vector control (TVC) system and its subassemblies with design changes noted, a thorough walkthrough of our procurement, manufacturing, and assembly process for creating our verification prototype (including software), a breakdown of how we verified each of our specifications through inspection and testing and the …

System Identification For Motion Control Of Unmanned Aerial Vehicles Platform, Raj Ramesh Agarwal

Theses and Dissertations

Comprehensive research on Unmanned Aerial Vehicles (UAV) system identification for motion control parameters is presented in this thesis, with a focus on the necessity of precise control and improved performance. Using Pseudorandom Binary Sequence (PRBS) and Normally Distributed Random Numbers, it presents a unique technique for excitation of UAV dynamic systems. It also shows how effective random signals are in time-domain identification for precise control in a range of flying circumstances. The piece of research includes a thorough analysis and implementation of various approaches and its further improvements, highlighting the benefits and drawbacks of each. These approaches include the free …

Nonlinear Guidance And Control Of Unmanned Aerial Manipulators For Delivering A Payload On A Moving Platform, Ravi Gyawali

Mechanical and Aerospace Engineering Theses - Archive

Unmanned Aerial manipulators (UAMs) are a class of Unmanned Aerial Vehicles (UAVs) equipped with a manipulator. By combining the aerial mobility of a UAV with a manipulator's dexterity, these hybrid systems can perform a wide range of complex tasks while reducing risks and costs. As a result, they are increasingly being utilized for military, industrial, and agricultural applications.

The thesis presents a novel approach for a multi-UAM system to collaboratively deliver a payload on a stationary or maneuvering platform. A sliding-mode-based guidance law, sourced from existing literature, is integrated with a combined control technique for the UAVs and their respective …

On Uncertainty For Ill-Posed Robot Decision Problems, Jared Joseph Beard

Graduate Theses, Dissertations, and Problem Reports (ETD)

As robots adopt more real world responsibilities, they will be expected to solve more complicated problems. In some cases limited prior knowledge will result in unmodelled environmental conditions; in others, multiple users may have competing perspectives on how to frame a decision problem. Many existing frameworks, namely Markov decision processes (MDP) presuppose users have identified a specific problem with models sufficient to solve or learn a problem. If we wish to extend MDPs to novel problems or those heavily dependent on user feedback, autonomous decision makers must be able to identify limitations in how a given problem is framed and …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Safe Navigation Of Quadruped Robots Using Density Functions, Andrew Zheng

All Theses

Safe navigation of mission-critical systems is of utmost importance in many modern autonomous applications. Over the past decades, the approach to the problem has consisted of using probabilistic methods, such as sample-based planners, to generate feasible, safe solutions to the navigation problem. However, these methods use iterative safety checks to guarantee the safety of the system, which can become quite complex. The navigation problem can also be solved in feedback form using potential field methods. Navigation function, a class of potential field methods, is an analytical control design to give almost everywhere convergence properties, but under certain topological constraints and …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Hardware-In-The-Loop Reaction Wheel Testbed With Camera Vision, Abigail Romero, Harvey Perkins, Stephen Kwok-Choon

College of Engineering Summer Undergraduate Research Program

Reaction wheels are widely used in aerospace systems as a method of attitude control. This research was focused on the design, development, and testing of a hardware-in-the-loop reaction wheel testbed that can be used for research and teaching applications related to satellite navigation and control. This project successfully utilized commercial off-the-shelf components to develop a reaction wheel capable of controlling the orientation of a freely rotating platform, as well as tracking objects using computer vision.

Integrated Energy-Aware Motion Planning And Charge Scheduling Of Unmanned Aerial Vehicles, Hayleyesus Alemayehu

All Theses

The growing demand for unmanned aerial vehicles (UAVs) is driven by their operational convenience, cost-effectiveness, availability, and adaptability to various scenarios. In energy-constrained environments, optimizing energy consumption and ensuring a continuous power supply for UAVs is crucial for mission success. The objective of this thesis is to address this issue by integrating energy-aware motion planning and charge scheduling for UAVs by utilizing a charger hosted on an unmanned ground vehicle (UGV), whose rendezvous locations and routes are jointly computed to minimize overall energy consumption.

This thesis proposes a hierarchical trajectory and control framework comprising local and global planners for each …

Comparison Of Dynamics Stability Testing Techniques With Magnetic Suspension Wind Tunnel Capabilities, Otoniel A. Ramirez, Mark Schoenenberger, David E. Cox, Colin P. Britcher

Mechanical & Aerospace Engineering Faculty Publications

Dynamic stability testing techniques currently utilized at NASA Langley Research Center (LaRC) are conducted in multiple facilities and consists of free flight, forced oscillation, and free-to-oscillate tests. The NASA/ODU Magnetic Suspension and Balance System (MSBS) has been recommissioned to explore its utility as an additional facility to expand the dynamic stability test capabilities currently available at NASA LaRC. Simulations were created to replicate each current test facility and method as closely as possible. Data collected from the simulated environments was corrupted with replicated noise sources of the different testing environments and then compared to real data collected during tests when …

Optimal Path Planning For Aerial Robots Using Genetic Algorithm, Anna Puigvert I Juan

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents a path optimization solution for a robot in two different constrained 3-dimensional (3D) environments. The robot is required to travel from its current position to a goal position following minimum cost paths (optimal paths). The first environment has 3D obstacles that interfere with the robot’s path. The path cost for this environment accounts for the minimum distance traveled by the robot from the start to the goal position while avoiding obstacles. The second environment is the atmosphere of Venus, specifically a flyable region of this atmosphere with characteristics similar to Earth’s. This environment has strong westward winds …

Foundations For Finite-State Modelling Of A Two-Dimensional Airfoil That Reverses Direction, Jake Michael Oscar Welsh

McKelvey School of Engineering Graduate Student Theses & Dissertations

Current 3-D finite-state wake models are incapable of simulating a maneuver in which the sign of the free-stream velocity changes direction and the rotor enters its own wake -- as might occur in the case of a helicopter which ascends and then descends. It is the purpose of this work to create a 2-D finite-state wake model which is capable of handling changes in free-stream direction as a precursor to development of a 3-D model that can do the same.

The 2-D finite-state model used for reentry modifications is an existing model created by Peters, Johnson, and Karunamoorthy. By the …

Artificial Intelligence, Controls, And Sensor Fusion For Optimization And Modeling Of Space Missions And Particle Accelerators, Reza Pirayeshshirazinezhad

Mechanical Engineering ETDs

This PhD dissertation is devoted to developing artificial intelligence (AI) applications for space missions and particle accelerators considering constraints on the computational resources. The space mission studied in this research, the Virtual Telescope for X-ray Observations (VTXO), is the mission exploiting 2 6U-CubeSats operating in a precision formation. The goal of the VTXO project is to develop a space-based, X-ray imaging telescope with high angular resolution precision. VTXO space mission is designed and the mission is optimized to increase the performance of the mission. Trajectory optimization with AI, hybrid control, control algorithms, and high performance computing are all used to …

The Effect Of Store-To-Store Energy Transfers On The Global Dynamics Of Aircraft, Guilherme Mainieri Eymael, Keegan J. Moore

UNL Student Research Days Posters, Undergraduate

This study analyzes the energy transfer mechanisms when nonlinear devices (stores) are attached to a linear model airplane. For that, a reduced-order model (ROM) was derived to simulate the first two flexible modes of vibration of the primary structure (aircraft) with one store in each wing. Each store can either be locked or unlocked. When locked, it only contributes as mass-effect, and when unlocked, it adds nonlinearity to the system. Simulations were then performed with either both stores locked, one store unlocked, or both stores unlocked. It was found that the attachment of nonlinear stores in the ROM changes the …