Multi-Vehicle Systems and Air Traffic Control Commons^™

The Pid-Based Three Quadcopter Uavs Formation Control Under External Disturbance, Vo Van An, Trinh Luong Mien

Makara Journal of Technology

This paper presents the design and evaluation of a formation control strategy for three quadcopter UAVs, based on a PID controller in a leader–follower structure, under the influence of external disturbances. Each UAV employs a six-degree of-freedom dynamic model and utilises a cascade PID control architecture, in which the inner control loop stabilises the attitude. In contrast, the outer control loop regulates position and maintains the formation. The PID parameters are tuned using the Ziegler–Nichols method to ensure simple implementation and low computational cost. The performance of the control system is evaluated through simulations in the MATLAB environment for two …

Statistical Analysis Of Log Transformation Effectiveness In Air Traffic Movement Forecasting During Covid-19 In South Africa, John Lehlaka Masekoameng

Journal of Aviation Technology and Engineering

This study evaluates the effectiveness of log transformation in enhancing multiple regression models used to forecast air traffic movements (ATMs) in South Africa during the COVID-19 pandemic. Using 60 monthly observations from October 2016 to September 2021, the analysis incorporates variables such as revenue, lockdown levels, COVID-19 metrics, exchange rates, gross domestic product, and population. Two models are compared: one using raw ATMs and another with log-transformed ATMs as the dependent variable.

While the untransformed model shows stronger explanatory power (R² = 0.904, adjusted R² = 0.891) compared to the log-transformed model (R² = 0.772, adjusted R² = 0.741), the …

A Feasibility Study Into The Usability And Application Of An Unmanned Aerial Vehicle For Aircraft Inspection And Quality Assurance Inspections, Reece P. Bhave

Journal of Aviation Technology and Engineering

The global aviation industry is often characterized as one of the safest modes of transportation in the modern world. With an abundance of quality assurance inspections and checks to determine operations safety, modern-day commercial aircraft that are utilized for passenger and cargo flights are held to a higher safety standard defined by regulatory bodies, such as the Federal Aviation Administration in the United States of America and the European Union Aviation Safety Agency in the European Union. While these quality standards are maintained via a series of inspections, checks, and preventative maintenance procedures, they are limited to only visual or …

Aircraft Turnaround Bottlenecks: Addressing Ground Handling Delays For Operational Excellence, Vigneswaran Cm, Syedeen Khan, Benedict M, Srinath R, Mukesh Pr, Jayaram R Pothnis, Inamul Hasan

International Journal of Aviation, Aeronautics, and Aerospace

Ground handling delays at major airports pose significant challenges, impacting operational efficiency, airline schedules, and passenger satisfaction. This study explores the root causes of these delays, including resource constraints, operational inefficiencies, adverse weather, technical failures, and security issues. By examining case studies from major airports, the report identifies key solutions such as technology integration, infrastructure upgrades, staff training, standardized procedures, and enhanced communication systems. The findings underscore the importance of adopting proactive and collaborative approaches to optimize ground handling operations, ensuring smoother airport workflows and improved service delivery in the face of growing air traffic demands.

Towards The Wearable Cardiorespiratory Sensors For Aerospace Applications, Chandan Sheikder

Journal of Aviation/Aerospace Education & Research

In safety-critical aviation operations, adaptive Human-Machine Interfaces (HMI) rely on accurate physiological monitoring to mitigate cognitive overload. While cardiorespiratory sensors are promising for real-time cognitive workload assessment, existing studies lack rigorous validation of consumer-grade devices in high-stress aviation contexts and fail to address measurement uncertainty propagation. This study evaluates the Zephyr BioHarness, a commercial wearable sensor, against clinical-grade equipment during arithmetic tasks simulating aviation cognitive demands. By integrating a neuro-fuzzy system with uncertainty propagation methods, we quantify the reliability of heart rate (HR) and breathing rate (BR) metrics for workload estimation. Results demonstrate moderate HR accuracy (RMSE: 4.85 bpm, CC: …

Benefits And Challenges Of Constructing Low-Altitude Air Route Network Infrastructure For Developing Low-Altitude Economy, Xiaohan Liao, Chenchen Xu, Huping Ye

Bulletin of Chinese Academy of Sciences (Chinese Version)

Low-altitude airspace is a resource that needs to be fully explored, and the low-altitude economy is a new type of economic activity resulted from low-altitude airspace exploration and utilization. As the primary players of low-altitude flight activities, the commercialization and wide applications of unmanned aerial vehicles (UAVs) are promoting the prosperity of the low-altitude economy. A low-altitude air route network is an effective means to ensure the safe and efficient operations of a large number of UAVs, and it is also a new key infrastructure hosting low-altitude traffic. The history shows that the investment on public transport infrastructure as a …

Impact Of Low-Altitude Technology On Low-Altitude Industry Development From Perspective Of Low-Altitude Economy, Yong Wang, Yusen Yang, Jimin Zeng, Zhenglong He, Zongxi Cen

Bulletin of Chinese Academy of Sciences (Chinese Version)

Low-altitude economy, as a typical representative of new quality productive forces and a strategic emerging industry, has become an important engine for promoting high-quality economic development and achieving technological self-reliance and self-improvement in China. This study systematically reviews the development trajectory of low-altitude economy, deeply elucidates the connotations and characteristics of low-altitude technology and its impact mechanisms on low-altitude industrial development, providing theoretical support for constructing a modernized low-altitude economic system. It finds that the concept of low-altitude economy has undergone a paradigm shift from industry terminology to economic formation, gradually completing the institutionalization process from strategic planning to legal …

Development Index Assessment And Future Prospects Of China’S Low-Altitude Economy, Jiaoe Wang, Delin Du, Zhuo Chen, Wenwei Tan

Bulletin of Chinese Academy of Sciences (Chinese Version)

With the gradual opening of low-altitude airspace and continuous advancements in low-altitude technology, the low-altitude economy has ushered in significant development opportunities, emerging as a quintessential example of new quality productive forces and garnering widespread attention from both the state and society. However, given China’s vast territory, the development trends and foundational conditions of the low-altitude economy vary considerably across regions, presenting distinct challenges and prospects. To accurately assess the development trends of the low-altitude economy, this study constructs an evaluation framework based on five dimensions, namely, innovation efficacy, industrial strength, scenario vitality, development potential, and support capability, and conducts …

A New Trajectory In Uav Safety: Leveraging Reinforcement Learning For Distance Maintenance Under Wind Variations, Xiaolin Xu, Jeffrey Sun

Journal of Aviation/Aerospace Education & Research

In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle. A thorough analysis and rigorous simulation and testing of aircraft systems are essential to avoid severe safety hazards. This paper delves into the safety issue in UAV operations, specifically regarding maintaining minimum safety distances under fluctuating wind conditions. The study introduces a novel solution based on a Deep Deterministic Policy Gradient (DDPG) model, a reinforcement learning method. The DDPG model was trained using a simulated environment created through the Gazebo simulator, with values for wind …

Accurate Indoor Navigation System Based On Imu/Lp-Mm Integrated Method Using Kalman Filter Algorithm, Abdullah Mohammed Bahasan

Hadhramout University Journal of Natural & Applied Sciences

Abstract

The demand for navigation systems is rapidly increasing, especially in indoor environments which the signal of GPS is not available. Therefore the Inertial Measurement Unit (IMU) system is a suitable navigation system in such indoor environments. It usually consists of three accelerometers and three gyroscopes to determine position, velocity and attitude information, respectively, without need of any external source. But this type of navigation systems has errors growth with time due to accelerometers and gyroscopes drifts. This paper introduces indoor navigation system based on integrated IMU navigation system with proposed system called Landmarks Points-Map Matching (LP-MM) system using Kalman …

Stochastic Optimization To Reduce Aircraft Taxi-In Time At Igia, New Delhi, Rajib Das, Saileswar Ghosh, Rajendra Desai, Pijus Kanti Bhuin, Stuti Agarwal

International Journal of Aviation, Aeronautics, and Aerospace

Since there is an uncertainty in the arrival times of flights, pre-scheduled allocation of runways and stands and the subsequent first-come-first-served treatment results in a sub-optimal allocation of runways and stands, this is the prime reason for the unusual delays in taxi-in times at IGIA, New Delhi.

We simulated the arrival pattern of aircraft and utilized stochastic optimization to arrive at the best runway-stands allocation for a day. Optimization is done using a GRG Non-Linear algorithm in the Frontline Systems Analytic Solver platform. We applied this model to eight representative scenarios of two different days. Our results show that without …

A Deep Bilstm Machine Learning Method For Flight Delay Prediction Classification, Desmond B. Bisandu, Irene Moulitsas

Journal of Aviation/Aerospace Education & Research

This paper proposes a classification approach for flight delays using Bidirectional Long Short-Term Memory (BiLSTM) and Long Short-Term Memory (LSTM) models. Flight delays are a major issue in the airline industry, causing inconvenience to passengers and financial losses to airlines. The BiLSTM and LSTM models, powerful deep learning techniques, have shown promising results in a classification task. In this study, we collected a dataset from the United States (US) Bureau of Transportation Statistics (BTS) of flight on-time performance information and used it to train and test the BiLSTM and LSTM models. We set three criteria for selecting highly important features …

Ads-B Communication Interference In Air Traffic Management, George Ray

International Journal of Aviation, Aeronautics, and Aerospace

Automated Dependent Surveillance Broadcast (ADS-B) provides position and state information about aircraft and is becoming an essential component in the global air traffic management system. ADS-B transponders broadcast this key information on a common frequency to both other aircraft and to secondary surveillance radar systems located at ground stations. Both the aircraft transponders and the ground stations work together to assist in managing the commercial airspace. Since the aircraft transponders all broadcast on the same frequency and are in close proximity there is an apparent risk of interference and the garbling of the communications needed to manage the airspace.

The …

Impact Of Covid-19 On Aviation-Wildlife Strikes Across Europe, Isabel C. Metz, Marta Giordano, Dionysios Ntampakis, Marianna Moira, Anneke Hamann, Rosanne Blijleven, Jürgen J. Ebert, Alessandro Montemaggiori

Human–Wildlife Interactions

Collisions between aircraft and wildlife (i.e., wildlife strikes) pose a serious threat toward the safety of aircraft, its crew, and passengers. The effects of COVID-19 related travel restrictions on wildlife strikes are unknown. With this study, we aim to address this information gap by assessing the changes of wildlife hazard management performance across European airports during the lockdown period (e.g., period of reduced operations and borders closure in spring 2020). We also sought to raise awareness of the importance of wildlife strike prevention in times of reduced operations. The objective of our study was to compare wildlife strike data before …

Changing The Process In Educational Field And Air Navigation Through Advances In Hologram Technology, Camilo Fernandez Sr.

Journal of Aviation Technology and Engineering

The objective of this piece is to propose reasons that change the way air traffic controllers and others learn and work in air navigation, but also how they can improve workloads, due to the implementation of holographic radar. This research also aims to describe how this could reduce the cognitive load of an operator, thanks to the improvement of visual perspective and capacity of analysis, in order to more easily control an aircraft.

Seeing that the visual facilitation is well known, radar is able to represent in three dimensions and in detail that which could not previously be perceived. This …

Can The Timeframe Of Reported Uas Sightings Help Regulators?, Spencer Erik Pitcher, Kelly A. Whealan-George

Beyond: Undergraduate Research Journal

Remotely controlled small aircraft, otherwise known as Unmanned Aircraft Systems (UAS) or drones have started to impact the United States National Airspace System by interfering with the safe flight of aircraft. As the UAS industry continues its expected growth into the future, lawmakers, as well as regulators at the Federal Aviation Administration (FAA) and the aviation community must be able to predict when there will be more UAS craft in the air that could cause an interruption to air traffic so that more resources can be allocated optimally to counter the threat of UAS craft. The purpose of this study …

Atmospheric Pressure Calibration To Improve Accuracy Of Transponder-Based Aircraft Operations Counting Technology, John H. Mott, Chuyang Yang, Darcy M. Bullock

Journal of Aviation Technology and Engineering

In the United States, over 2,400 of the 2,941 non-primary National Plan of Integrated Airport System airports have limited means of establishing operations counts due to lack of available personnel. Precise counts of airport operations are helpful for allocating airport improvement funds, as well as for local and system planning. An emerging technology utilizing ADS-B position data to calibrate signal strength received from Mode C transponders, thereby capturing location information from over 90% of the aircraft operating in the National Airspace System, has successfully estimated operations counts at these non-towered airports with reasonable levels of accuracy. This paper evaluates the …

Methodology For Convergence Of The Training Program With The Professional Activities Of Aviation Specialists, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The method of developing curricula for training aviation specialists for civil aviation of the Republic of Uzbekistan is analyzed. It is substantiated that it does not sufficiently take into account the labor market requirements for the composition and content of academic disciplines. An overview of foreign experience in bridging the gap between educational programs and the workplace is given. A method based on a statistical analysis of civil aviation regulations is recommended.

Support To Design For Air Traffic Management: An Approach With Agent-Based Modelling And Evolutionary Search, Gabriella Gigante, Roberto Palumbo, Domenico Pascarella, Alessandro Pellegrini, Gabriella Duca, Miquel Angel Piera, Juan José Ramos

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents a methodology to manage the support to design in ATM operations. We propose a workflow for the design of ATM solutions in a performance-based setting. The methodology includes the evaluation of the impact on human behaviour and exploits a combination of different paradigms, such as Agent-Based Modelling and Simulation, and Agent-Based Evolutionary Search. We prove the soundness of the methodology by carrying out a real case study, which is the transition from Direct Routing to Free Routing in the Italian airspace. The validation results exhibit limited errors for the assessment of the performance metrics under evaluation. Furthermore, …

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Predictability Improvement Of Scheduled Flights Departure Time Variation Using Supervised Machine Learning, Deepudev Sahadevan, Palanisamy Ponnusamy Dr, Manjunath K. Nelli Mr, Varun P. Gopi Dr

International Journal of Aviation, Aeronautics, and Aerospace

The departure time uncertainty exacerbates the inaccuracy of arrival time estimation and demand for arrival slots, particularly for movements to capacity constrained airports. The Estimated Take-Off Time (ETOT) or Estimated Departure Time(ETD) for each individual flight is currently derived from Air Traffic Flow Management System (ATFMS), which are solely determined based on individual flight plan Estimated Off Block Time(EOBT) or subsequent delays updated by Airline. Even if normal weather conditions prevail, aircraft departure times will differ from ETOTs determined by the ATFMS due to a number of factors such as congestion, early/delayed inbound flight (linked flights), reactionary delays and air …

Digitalization Of Educational And Methodological Support For The Training Of Aviation Dispatchers, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The tasks of improving the educational process of training civil aviation dispatchers on the basis of the development and implementation of digital teaching aids are considered. Legislative and regulatory documents are accepted as an object of digitalization. The end result of the research is expressed in the provision of the educational process with a special electronic educational complex, which has the functions of providing the necessary information and conducting practical exercises to deepen, consolidate and control knowledge in the field of aviation documents.

Dynamic Delegated Corridors And 4d Required Navigation Performance For Urban Air Mobility (Uam) Airspace Integration, Trong Van Nguyen

Journal of Aviation/Aerospace Education & Research

Increased traffic congestion on urban road networks has impacted the travel time for commuters in highly populated urban centers. Urban Air Mobility (UAM) is recognized as a system that transports the passenger and air cargo from any location to any destination within a metropolitan area. UAM may offer a solution to the problematic issue of automobile urban surface transportation congestion. However, the predicted significant growth in the demand for integration of UAM operations into the existing airspace system in the next 20 years and beyond may exceed the capacity of current air traffic control (ATC) system resources, particularly the ATC …

Investigation Into The Effects Of Blade Tip Twist On Noise Reduction For A Naca 0012 Rotor Blade, Uyen T. Sou

McNair Research Journal SJSU

The advancement of the urban air mobility concept is heavily dependent on the public acceptance of the aircraft vehicles used for air taxis. The importance of the perception of noise by humans is crucial to the passing of legislation and proposals working to implement the new transport system. The investigation into how the noise perception can be reduced is vital to the success of the personal air travel industry. The air taxi design has been geared towards the rotorcraft models. Therefore, the investigation into the rotor blade designs is necessary because, similar to helicopters, the main component in noise generation …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Design And Realization Of An Unmanned Aerial Rotorcraft Vehicle Using Pressurized Inflatable Structure, Nirmal Sadasivan

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned aerial rotorcraft vehicles have many military, commercial and civil applications. There is a necessity to advance the performance on several ranges of rotorcraft for using these vehicles successfully in the expanded future roles. A lower flight time, noise disturbance and safety issues remain the key obstacles in increasing the efficiency of the rotorcraft for various applications. This work presents the design and realization of a rotorcraft using pressurized inflatable structure filled with lighter than air gas such as helium or hydrogen to provide lift assistance for the vehicle. Two iterative design procedures were developed for designing the vehicle. One …