Aerodynamics and Fluid Mechanics Commons^™

Space Dynamics Laboratory Payload Challenge: Autonomous Water Sampling Uav, Thomas Wheeler, Zachary Williams, Joseph Stack

Williams Honors College, Honors Research Projects

The following report has been completed over the course of the Fall 2018 and Spring 2019 semesters at The University of Akron by Joseph P. Stack (Aerospace Systems Engineering), Thomas J. Wheeler (Mechanical Engineering) and Zachary M. Williams (Mechanical Engineering). The purpose of this project was to create a payload system for the Akronauts Rocket Design Team to use at the Intercollegiate Rocket Engineering Competition (IREC) Spaceport America Cup. The Competition as a challenge that is sponsored by Space Dynamics Laboratory specifically regarding payload systems. The challenge in very open-ended and allows student to identify their own scientific experiment and …

Design And Optimization Of Multi-Winglets, Daniel Hearle

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Design And Development Of An Actuation System For Morphing Flaps, Nate Mcwilliams

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Design And Preliminary Analysis Of A Morphing Flap, Ethan Wiggins

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Generator Design: A Study Of Optimized Airflow, Rachel Wattleworth

Williams Honors College, Honors Research Projects

The core goal of this project was to prototype, test, and evaluate a new type of fan for the Safran Electrical & Power air-cooled generators. The idea of a new fan being made for these two generators arose when they were not adhering to design requirements. A base mixed-flow fan was created to test on multiple generators. Upon creating a prototype, it will be tested to prove if it can increase the air flow, decrease temperatures, and increase power and life of the machines. They all proved to be successful and achieve the main objectives for this project. Data such …

Effect Of Perturbations On The Dominant Flow Structures In A Rectangular Lid-Driven Cavity With Particle Suspensions, Siva Bolisetty

Graduate Research Theses & Dissertations

The lid-driven cavity is a canonical problem in the field of analytical and computational fluid dynamics. This work is focused on a 2-D rectangular cavity with a length twice the size of its width and consists of an incompressible fluid with a moving upper wall/lid while the rest of the wall boundaries are subjected to fixed, no-slip, zero-velocity boundary conditions. The objective is to investigate the effect of perturbations resulting from particle drag and particle collisions on dominant flow structures of the fluid within this cavity. The dominant flow structures in a rectangular lid-driven cavity constitute a primary vortex, a …

Scaling Analysis And Experimental Investigation Of A Rotating Detonation Engine, David Thomas Billups

Graduate Theses, Dissertations, and Problem Reports (ETD)

Pressure gain combustion (PGC) technologies, specifically rotating detonation engines (RDEs), are poised to provide the next big leap in gas turbine engine advancement, significantly increasing the thermal. RDEs make use of thermodynamic advantages of isochoric as opposed to isobaric combustion. Theorized to increase thermal efficiency by up to 7% [1], the RDE would have significant impact on reducing anthropogenic carbon emissions. In addition to efficiency gains, the RDE also provides mechanical simplicity and reduced size advantages compared to it’s traditional counterparts and PGC competition.

The United States (U.S.) Department of Energy (DOE) National Energy Technology Laboratory (NETL) maintains and operates …

Steady Flows In Annular Wedge Lid-Driven Cavities, Anandan Ganapathy

Graduate Research Theses & Dissertations

The lid-driven cavity is a well-known canonical problem in the field of analytical and computational fluid dynamics. It is comprised of a square domain of an incompressible fluid with its upper lid has a specified velocity and the remaining wall boundaries are subjected to fixed, no-slip, zero-velocity constraints. There are numerous examples found in the literature that address the well-known, stable behavior of this system, which includes a primary recirculating vortex, secondary corner vortices, and a velocity profile through the center midpoint y-axis that is shown to be dependent on the Reynolds number. In this investigation, the shape of the …

A Computational Fluid Dynamics Analysis Of The Aerodynamic Performance Of Wind Turbine, Ashkan Ostovari

Graduate Research Theses & Dissertations

Renewable energy resources are likely to be a future energy solution. Among them, the wind has gained a lot of interest. Despite the theoretical limitation in wind energy harnessing efficiency, it is, still, one of the most promising renewable resources with utilizing turbines to extract this energy. Wind turbines, based on their axis of rotation are categorized into vertical axis wind turbine (VAWT) and horizontal axis wind turbine (HAWT), which HAWT’s have shown relatively higher efficiency than VAWT’s. The aim of this thesis is first to develop a scaled-down model of a wind turbine in Computational Fluid Dynamics (CFD) environment …

Computational Study Of Flow Interactions Over A Close Coupled Canard-Wing On Fighter, Setyawan Bekti Wibowo, Sutrisno Sutrisno, Tri Agung Rohmat

International Journal of Aviation, Aeronautics, and Aerospace

There have been many attempts to improve the flying performance of a fighter. By modifying the flow that occurs along the fuselage is expected to improve the performance of the aircraft. One of the indicators of combat aircraft performance is the ability to perform maneuver movement. Adding a canard as forewing on the fighter wing configuration is considered capable of raising the ability in maneuver movement. The use of canard-delta pairs will affect the performance and aerodynamic characteristics of the plane. Wings and canards with delta configuration will make the rolled-up vortex as a lifting force producer on the aircraft. …

Urban Flow And Small Unmanned Aerial System Operations In The Built Environment, Kevin A. Adkins

International Journal of Aviation, Aeronautics, and Aerospace

The Federal Aviation Administration (FAA) has put forth a set of regulations (Part 107) that govern small unmanned aerial system (sUAS) operations. These regulations restrict unmanned aircraft (UA) from flying over people and their operation to within visual line of sight (VLOS). However, as new applications for unmanned aerial systems (UAS) are discovered, their capabilities improve, and regulations evolve, there is an increasing desire to undertake urban operations, such as urban air mobility, package delivery, infrastructure inspection, and surveillance. This built environment poses new weather hazards that include enhanced wind shear and turbulence. The smaller physical dimensions, lower mass and …

Aerodynamic Design And Exploration Of A Blended Wing Body Aircraft At Subsonic Speed, Sam Dakka Dr, Oliver Johnson

International Journal of Aviation, Aeronautics, and Aerospace

Blended Wing Body (BWB) is a novel aircraft concept which provides many different aerodynamic benefits over conventional aircrafts design. This research investigated the BWB design, L/D characteristics, surface pressure distribution and span-wise lift distribution of a BWB aircraft at low to medium subsonic speeds. A BWB model was designed, manufactured and tested in a subsonic wind tunnel to validate the CFD simulation. The results gained from the investigation proved that BWB has a L/D improvement of 9.4% than conventional aircrafts and 21% increase at medium subsonic speeds (Mach 0.6) compared to lower subsonic speeds of 25 m/sec. It was found …

A New Method For The Prediction Of The Downwash Angle Gradient, Mondher Yahyaoui Dr.

International Journal of Aviation, Aeronautics, and Aerospace

A new method for the prediction of the downwash angle gradient due to aircraft wings across the span of an aft horizontal tail in the incompressible regime is presented. The approach is quite general and accounts for all practical wing geometric parameters except for wing twist where it is shown that this parameter has very little effect on the downwash angle gradient. The method consists of an empirical law which requires the prior knowledge of three constants. These have been computed either based on experimental data when available or using numerical data obtained using the vortex-lattice method. These constants are …

Uas Flight Operations In Complex Terrain: Assessing The Agricultural Impact From Hurricane Maria In The Central Mountainous Region Of Puerto Rico, Kevin Adkins

Publications

Hurricane Maria struck Puerto Rico in September 2017 as a Category 4 storm causing major damage to infrastructure, agriculture and natural ecosystems, as well as the loss of many lives. Among the crops hardest hit was coffee, one of the most important crops in Puerto Rico. As a perennial system, coffee takes various production forms along a gradient from high shade/biodiversity coffee farms to low shade coffee monocultures and therefore offers an ideal means for the study of resistance and resilience of an agroecosystem to weather and climate disturbance. During the summer of 2018, 14 impacted farms across the production …