Aerospace Engineering Commons^™

Rf Fingerprinting Unmanned Aerial Vehicles, Norah Ondus

Doctoral Dissertations and Master's Theses

As unmanned aerial vehicles (UAVs) continue to become more readily available, their use in civil, military, and commercial applications is growing significantly. From aerial surveillance to search-and-rescue to package delivery the use cases of UAVs are accelerating. This accelerating popularity gives rise to numerous attack possibilities for example impersonation attacks in drone-based delivery, in a UAV swarm, etc. In order to ensure drone security, in this project we propose an authentication system based on RF fingerprinting. Specifically, we extract and use the device-specific hardware impairments embedded in the transmitted RF signal to separate the identity of each UAV. To achieve …

Robust Nonlinear Tracking Control For Unmanned Aircraft In The Presence Of Wake Vortex, Petr Kazarin, Vladimir Golubev, William Mackunis, Claudia Moreno

Publications

The flight trajectory of unmanned aerial vehicles (UAVs) can be significantly affected by external disturbances such as turbulence, upstream wake vortices, or wind gusts. These effects present challenges for UAV flight safety. Hence, addressing these challenges is of critical importance for the integration of unmanned aerial systems (UAS) into the National Airspace System (NAS), especially in terminal zones. This work presents a robust nonlinear control method that has been designed to achieve roll/yaw regulation in the presence of unmodeled external disturbances and system nonlinearities. The data from NASA-conducted airport experimental measurements as well as high-fidelity Large Eddy Simulations of the …

Uav For Medical Equipment Distribution, Richard Barakat, Logan Christensen, Brandon Halebsky, Justin Slavick

Mechanical Engineering

This Final Design Review report documents the senior project participating in the Vertical Flight Society’s 38th Annual Student Design Competition sponsored by The Boeing Company. The goal of this project and competition is to develop an unmanned vertical lift for medical equipment distribution capable of safely delivering a 50 kg payload over distances up to 200 km. This system must be autonomous and have a backup plan to land if any part of the system malfunctions. We discuss the research and justification that drove the selection of the aircraft configuration, a winged quadcopter with a rear propeller. Furthermore, we document …

Flying Wing Uav For Surveillance And Object Tracking, Kristen Padgett, Scott Semmelink, Jared Lasley, Paul Horne

Senior Design Project For Engineers

Unmanned aerial vehicles (UAV) have become ubiquitous in recent years due to their adaptability and ease of use. Surveillance UAVs in particular have seen increased interest and usage by law enforcement, civilian security, surveying, and federal services. The increased interest has led to the development of UAVs with increased endurance and payload capacity. Further as many of the applications of surveillance drones involve heightened security requirements, an aircraft of domestic make is preferential to many organizations. With this demand in mind, Inspired Products, LLC put forth a request for assistance in the design and testing of a surveillance UAV. More …

Can The Timeframe Of Reported Uas Sightings Help Regulators?, Spencer Erik Pitcher, Kelly A. Whealan-George

Beyond: Undergraduate Research Journal

Remotely controlled small aircraft, otherwise known as Unmanned Aircraft Systems (UAS) or drones have started to impact the United States National Airspace System by interfering with the safe flight of aircraft. As the UAS industry continues its expected growth into the future, lawmakers, as well as regulators at the Federal Aviation Administration (FAA) and the aviation community must be able to predict when there will be more UAS craft in the air that could cause an interruption to air traffic so that more resources can be allocated optimally to counter the threat of UAS craft. The purpose of this study …

Analyzing And Improving Calculation And Tuning Process For A Uav, Laurel Wardell

Williams Honors College, Honors Research Projects

The nature of this project is confidential and cannot be disclosed in detail. Generally, this project deals with the analysis of a control system of a UAV with several electric motors and gimbals. The goal of this analysis is to improve control calculations for increased stability. In addition, development has been started on an application to streamline the tuning of gains for this particular controller, allowing for more efficient use of precious flight time.

Prospects Of The Development Of Unmanned Aerial Vehicles (Uavs), Rakhimjon Shokirov, Nuriddin Abdujabarov, Takhirov Jonibek, Kadamboy Saytov, Saidbek Bobomurodov

Technical science and innovation

This article outlines the current state of research and development for autonomous unmanned aircraft for civil use. Specifically, the history of UAVs for civil use, research and development in the world, and the topics and prospects for the control and operation of autonomous UAVs for civil use are defined. The perspectives for the use of unmanned aerial vehicles (UAVs) are addressed, programs due to the formation and problems preventing the use of UAVs are listed, and ways of increasing competitiveness are taken into account. This article provides an overview of research involving the advancement of UAV technology for the management …

Three-Dimensional, Vision-Based Proportional Navigation For Uav Collision Avoidance, Guanhong Gao

Doctoral Dissertations and Master's Theses

As the number of potential applications for Unmanned Aerial Vehicles (UAVs) keeps rising steadily, the chances that these devices will operate in close proximity to static or dynamic obstacles also increases. Therefore, collision avoidance is an important challenge to overcome for Unmanned Aerial Vehicle operations. Electro-optical devices have several advantages such as light weight, low cost, low algorithm requirements with respect to computational power and possibly night vision capabilities. Therefore, vision-based Unmanned Aerial Vehicle collision avoidance has received considerable attention. Although much progress has been made in collision avoidance systems (CAS), most approaches are focused on two-dimensional environments. In order …

Power-Over-Tether Uas Leveraged For Nearly-Indefinite Meteorological Data Acquisition, Daniel Rico, Carrick Detweiler, Francisco Muñoz-Arriola

School of Computing: Dissertations, Theses, and Student Research

Use of unmanned aerial systems (UASs) in agriculture has risen in the past decade. These systems are key to modernizing agriculture. UASs collect and elucidate data previously difficult to obtain and used to help increase agricultural efficiency and production. Typical commercial off-the-shelf (COTS) UASs are limited by small payloads and short flight times. Such limits inhibit their ability to provide abundant data at multiple spatiotemporal scales. In this paper, we describe the design and construction of the tethered aircraft unmanned system (TAUS), which is a novel power-over-tether UAS leveraging the physical presence of the tether to launch multiple sensors along …

Performance Testing Of Aero-Naut Camfolding Propellers, Or D. Dantsker, Robert W. Deters, Marco Caccamo, Michael S. Selig

Publications

The increase in popularity of unmanned aerial vehicles (UAVs) has been driven by their use in civilian, education, government, and military applications. However, limited on-board energy storage significantly limits flight time and ultimately usability. The propulsion system plays a critical part in the overall energy consumption of the UAV; therefore, it is necessary to determine the most optimal combination of possible propulsion system components for a given mission profile, i.e. propellers, motors, and electronic speed controllers (ESC). Hundreds of options are available for the different components with little performance specifications available for most of them. By examining a variety of …

Aerodynamic And Aeroacoustic Performance Of Small Uav Propellers In Static Conditions, William Jordan, Robert W. Deters, Shreyas Narsipur

Publications

The proliferation of small multi-rotor UAVs in commercial, recreational, and surveillance spheres has garnered significant interest in the noise produced by these vehicles. The current research aims to study the relationship between the aerodynamic performance and acoustic characteristics of small-scale UAV propellers. Three commercially available propellers for the DJI Phantom 2/3 UAV were selected for preliminary development and validation of an aeroacoustic experimental test setup and associated data reduction methods. Propeller thrust, torque, and power measurements were recorded at static conditions. Upon successful validation of the test bench, acoustic measurements were taken at the propeller disk’s upstream and in-plane locations. …

Conceptual Design Of A South Pole Carrier Pigeon Uav, Kendrick M. Dlima

Master's Theses

Currently, the South Pole has a large data problem. It is estimated that 1.2 TB of data is being produced every day, but less than 500 GB of that data is being uploaded via aging satellites to researchers in other parts of the world. This requires those at the South Pole to analyze the data and carefully select the parts to send, possibly missing out on vital scientific information. The South Pole Carrier Pigeon will look to bridge this data gap.

The Carrier Pigeon will be a small unmanned aerial vehicle that will carry a 30 TB solid-state hard drive …

Design And Test Of An Autonomy Monitoring Service To Detect Divergent Behaviors On Unmanned Aerial Systems, Loay Y. Almannaei

Theses and Dissertations

Operation of Unmanned Aerial Vehicles (UAV) support many critical missions in the United State Air Force (USAF). Monitoring abnormal behavior is one of many responsibilities of the operator during a mission. Some behaviors are hard to be detect by an operator, especially when flying one or more autonomous vehicles; as such, detections require a high level of attention and focus to flight parameters. In this research, a monitoring system and its algorithm are designed and tested for a target fixed-wing UAV. The Autonomy Monitoring Service (AMS) compares the real vehicle or simulated Vehicle with a similar simulated vehicle using Software …

Urban Cargo Transport Uav Final Design Review, Niko Giannakakos, Rafael Barreto Gutierrez, Tejas Bhavsar

Senior Design Project For Engineers

Delivery of goods to homes and offices over the last decades has seen a significant increase as more people and businesses need or want items sent directly to them. With the increase in demand, technology has also experienced a rapid growth, specifically in the field of unmanned aerial vehicles (UAVs). Many major companies are currently researching UAVs as the future of their delivery operations. With this ever-growing demand, NASA has issued a design competition of a UAV developed for urban deliveries. This unmanned aircraft system (UAS) would need to be able to deliver small packages, in a timely manner, within …

Active Fault-Tolerance Of The Unmanned Aerial Vehicle Automatic Control Systems, Vuong Anh Trung, Nguyen Van Thinh, Nguyen Duc Thanh, Nguyen Quang Vinh, Tran Thuan Hoang

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an introductory overview of principles of the three-layer hierarchy of active fault-tolerance, providing, determination of the fault type with as many details as enough to get recoverable fault reason and failure toleration by flexible redundancy using; the conception of active fault-tolerant control in abnormal modes is described. Developed models and methods of a systematic approach to fault tolerance in the direction of the effective use of the signal, parametric and structural redundancies and selection of parrying tools. Performed experimental researches of the unmanned aerial vehicle (UAV) automatic control systems (ACS).

Backstepping Approach For Design Of Cascaded Pid Controller With Guaranteed Trajectory Tracking Performance For Micro-Air Uav, Yusuf Kartal

Mechanical and Aerospace Engineering Theses - Archive

Flight controllers for micro-air UAVs are generally designed using Proportional- Integral-Derivative (PID) methods, where the tuning of gains is difficult and time-consuming, and performance is not guaranteed. In this thesis, we develop a rigorous method based on the sliding mode analysis and nonlinear backstepping to design a PID controller with guaranteed performance. This technique provides the structure and gains for the PID controller, such that a robust and fast response of the UAV for trajectory tracking is achieved. First, the second-order sliding variable errors are used in a rigorous nonlinear backstepping design to obtain guaranteed performance for the nonlinear UAV …

Adaptive Learning Terrain Estimation For Unmanned Aerial Vehicle Applications, Pedro L. Vergara Garcia

Doctoral Dissertations and Master's Theses

For the past decade, terrain mapping research has focused on ground robots using occupancy grids and tree-like data structures, like Octomap and Quadtrees. Since flight vehicles have different constraints, ground-based terrain mapping research may not be directly applicable to the aerospace industry. To address this issue, Adaptive Learning Terrain Estimation algorithms have been developed with an aim towards aerospace applications. This thesis develops and tests Adaptive Learning Terrain Estimation algorithms using a custom test benchmark on representative aerospace cases: autonomous UAV landing and UAV flight through 3D urban environments. The fundamental objective of this thesis is to investigate the use …

Development Of A Tailored Flight Test Approach For Small Unmanned Aircraft Systems, Neil A. Wolfe

Master's Theses

This document contains the details of a study conducted to determine an effective performance flight test approach specifically for small Unmanned Aircraft Systems (sUAS). This was done by taking proven procedures and documentation from the FAA and the Air Force for manned aircraft and tailoring them specifically for use with sUAS flight test programs. A ‘sUAS Flight Testing Handbook’ was created from the proceedings to aid commercial organizations and recreational developers conducting sUAS research without access to flight test experience. A performance flight test program was conducted with the AeroVironment RQ-20 Puma sUAS using the developed approach to verify that …

Prediction Of Noise Associated With An Isolated Uav Propeller, Samuel O. Afari

Doctoral Dissertations and Master's Theses

The emergent field of interest in the Urban Air Mobility community is geared towards a world where aerial vehicles are commonplace. This poses the problem of the effects of the radiated noise. The present research presents an in-depth analysis of the noise generation mechanism of a propeller as a mode of propulsion of the said aerial vehicles. Numerical simulation utilizing a Hybrid Large-Eddy Simulation (LES) coupled with Unsteady Reynolds-Averaged Navier-Stokes (RANS) solver, is adopted on an isolated propeller modeled from the commercial DJI Phantom II 9450 propeller. The Spalart-Allmaras one equation turbulence model with rotation/curvature correction is used. The Farassat’s …

First Approach To Coupling Of Numerical Lifting-Line Theory And Linear Covariance Analysis For Uav State Uncertainty Propagation, Cory D. Goates, Randall S. Christensen, Robert C. Leishman

Faculty Publications

Numerical lifting-line is a computationally efficient method for calculating aerodynamic forces and moments on aircraft. However, its potential has yet to be tapped for use in guidance, navigation, and control (GN&C). Linear covariance analysis is becoming a popular GN&C design tool and shows promise for pairing with numerical lifting-line. Pairing numerical lifting-line with linear covariance analysis allows for forward propagation of state uncertainty for real-time decision making. We demonstrate this for select state variables in a drone aerial recapture situation. Linear covariance analysis uses finite difference derivatives obtained from numerical lifting-line to calculate force and moment variances. These show agreement …

Propulsion System Testing For A Long-Endurance Solar-Powered Unmanned Aircraft, D. Dantsker, Robert Deters, Marco Caccamo

Publications

The increase in popularity of unmanned aerial vehicles (UAVs) has been driven by their use in civilian, education, government, and military applications. However, limited on-board energy storage significantly limits flight time and ultimately usability. The propulsion system plays a critical part in the overall energy consumption of the UAV; therefore, it is necessary to determine the most optimal combination of possible propulsion system components for a given mission profile, i.e. propellers, motors, and electronic speed controllers (ESC). Hundreds of options are available for the different components with little performance specifications available for most of them. In order to determine the …

Unmanned Aerial Power Line Surveillance Drone, Brock Arp, Wade Vine, Cameron Whigham, Lorenzo Stewart

Senior Design Project For Engineers

The purpose of our project is to provide power line workers and linemen with a safe way to inspect the power lines. Our Aircraft is an UAV that is capable of surveying 200 linear miles in a normal working shift. The aircraft will be launched/landed and operated from an F-150 pickup truck with a facilitated launch mechanism attached. The aircraft must maintain an altitude of 150-400 ft. It will be recovered via net that will extend from the truck as the plane comes in for a landing, This will eliminate the need for landing gear. The goal for this project …

Conceptual Design Of A Combat Search And Rescue Surveillance Unmanned Aerial Aircraft, Juan M. Chirinos-Paiz, Keegan J. Musser, Robert M. Zenko, Joshua Hunter

Senior Design Project For Engineers

Unmanned aerial vehicles (UAV) are becoming more efficient and widely used. The military uses UAV’s because it greatly reduces civilian and combatant deaths and injuries. UAV’s also are used in search and rescue mission to find distress civilians. The team wanted to create an UAV for search and rescue missions and military applications. The aircraft needed to be compact, perform better than other UAV’s, and be low cost. The team did reach a successful aircraft that meet the design requirements. The aircraft was successfully sized around the electronics and allows utilization of additive manufacturing techniques. Project management techniques showed that …

Using A Balloon-Launched Unmanned Glider To Validate Real-Time Wrf Modeling, Travis J. Schuyler, S. M. Iman Gohari, Gary Pundsack, Donald Berchoff, Marcelo I. Guzman

Chemistry Faculty Publications

The use of small unmanned aerial systems (sUAS) for meteorological measurements has expanded significantly in recent years. SUAS are efficient platforms for collecting data with high resolution in both space and time, providing opportunities for enhanced atmospheric sampling. Furthermore, advances in mesoscale weather research and forecasting (WRF) modeling and graphical processing unit (GPU) computing have enabled high resolution weather modeling. In this manuscript, a balloon-launched unmanned glider, complete with a suite of sensors to measure atmospheric temperature, pressure, and relative humidity, is deployed for validation of real-time weather models. This work demonstrates the usefulness of sUAS for validating and improving …

Cyber-Attack Drone Payload Development And Geolocation Via Directional Antennae, Clint M. Bramlette

Theses and Dissertations

The increasing capabilities of commercial drones have led to blossoming drone usage in private sector industries ranging from agriculture to mining to cinema. Commercial drones have made amazing improvements in flight time, flight distance, and payload weight. These same features also offer a unique and unprecedented commodity for wireless hackers -- the ability to gain ‘physical’ proximity to a target without personally having to be anywhere near it. This capability is called Remote Physical Proximity (RPP). By their nature, wireless devices are largely susceptible to sniffing and injection attacks, but only if the attacker can interact with the device via …

Real-Time Path Planning In Constrained, Uncertain Environments, Randall Christensen, Robert C. Leishman

Faculty Publications

A key enabler of autonomous vehicles is the ability to plan the path of the vehicle to accomplish mission objectives. To be robust to realistic environments, path planners must account for uncertainty in the trajectory of the vehicle as well as uncertainty in the location of obstacles. The uncertainty in the trajectory of the vehicle is a difficult quantity to estimate, and is influenced by coupling between the vehicle dynamics, guidance, navigation, and control system as well as any disturbances acting on the vehicle. Monte Carlo analysis is the conventional approach to determine vehicle dispersion, while accounting for the coupled …

Urban Flow And Small Unmanned Aerial System Operations In The Built Environment, Kevin A. Adkins

International Journal of Aviation, Aeronautics, and Aerospace

The Federal Aviation Administration (FAA) has put forth a set of regulations (Part 107) that govern small unmanned aerial system (sUAS) operations. These regulations restrict unmanned aircraft (UA) from flying over people and their operation to within visual line of sight (VLOS). However, as new applications for unmanned aerial systems (UAS) are discovered, their capabilities improve, and regulations evolve, there is an increasing desire to undertake urban operations, such as urban air mobility, package delivery, infrastructure inspection, and surveillance. This built environment poses new weather hazards that include enhanced wind shear and turbulence. The smaller physical dimensions, lower mass and …

Space Dynamics Laboratory Payload Challenge: Autonomous Water Sampling Uav, Thomas Wheeler, Zachary Williams, Joseph Stack

Williams Honors College, Honors Research Projects

The following report has been completed over the course of the Fall 2018 and Spring 2019 semesters at The University of Akron by Joseph P. Stack (Aerospace Systems Engineering), Thomas J. Wheeler (Mechanical Engineering) and Zachary M. Williams (Mechanical Engineering). The purpose of this project was to create a payload system for the Akronauts Rocket Design Team to use at the Intercollegiate Rocket Engineering Competition (IREC) Spaceport America Cup. The Competition as a challenge that is sponsored by Space Dynamics Laboratory specifically regarding payload systems. The challenge in very open-ended and allows student to identify their own scientific experiment and …

Swat Operations Unmanned Vehicle, John K. Zelina, Tyler Meadows, Ryan Cook, Mathew Fellows

Williams Honors College, Honors Research Projects

During SWAT operations, it is common to have a barricaded suspect who may be armed and a serious threat to SWAT team personnel. In these cases, sending a robot into harm's way to assess the situation as opposed to an operator has become the standard. The purpose of this of this research was to design and develop an unmanned system for the City of Akron's SWAT Team that can be injected into these scenarios to improve outcomes and mitigate risk to SWAT operators.

Artificial Immune System For Unmanned Aerial Vehicle Abnormal Condition Detection And Identification, Ryan G. Mclaughlin

Graduate Theses, Dissertations, and Problem Reports (ETD)

A detection and identification scheme for abnormal conditions was developed for an unmanned aerial vehicle (UAV) based on the artificial immune system (AIS) paradigm. This technique involves establishing a body of data to represent normal conditions referred to as “self” and differentiating these conditions from abnormal conditions, referred to as “non-self”. Data collected from simulation of the UAV attempting to autonomously fly a pre-decided trajectory were used to develop and test a scheme that was able to detect and identify aircraft sensor and actuator faults. These faults included aerodynamic control surface locks and damages and angular rate sensor biases. The …