Aerospace Engineering Commons^™

Application Of Artificial Neural Networks For The Prediction Of Aluminium Agglomeration Processes, Tejasvi K, Y Pydi Setty, Vemana Venkateswara Rao, Kalyan Chakarvarthy

International Journal of Aviation, Aeronautics, and Aerospace

Aluminium is universal and vital constituent in composite propellants and typically used to improve performance. Aluminum agglomeration takes place on the burning surface of aluminized propellants, which leads to reduced combustion efficiency and 2P flow losses. To understand the processes and behaviour of aluminum agglomeration, particles size distribution of composite propellants were studied using a quench particle collection technique, at 2 to 8 MPa and varying quench distances from 5mm to 71mm. To predict the agglomerate diameter of metallized/ultra-fine aluminium of composite propellants, a new artificial neural network (ANN) model was derived. Five Layered Feed Forward Back Propagation Neural Network …

Additive Manufacturing Of High Solids Loading Hybrid Rocket Fuel Grains, Stephen P. Johnson, Michael Baier, Ibrahim E. Gunduz, Steven F. Son

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hybrid rocket motors offer many of the benefits of both liquid and solid rocket systems. Like liquid engines, hybrid rocket motors are able to be throttled, can be stopped and restarted, and are safer than solid rocket motors since the fuel and oxidizer are in different physical states. Hybrid rocket motors are similar to solid motors in that they are relatively simple and have a high density-specific impulse. One of the major drawbacks of hybrid rocket motors is a slower burning rate than solid rocket motors. Complex port geometries provide greater burning surface area to compensate for lower burning rates …

Theoretical Acoustic Absorber Design Approach For Lox/Lch4 Pintle Injector Rocket Engines, Jonathan Candelaria

Open Access Theses & Dissertations

Liquid rocket engines, or LREs, have served a key role in space exploration efforts. One current effort involves the utilization of liquid oxygen (LOX) and liquid methane (LCH4) LREs to explore Mars with in-situ resource utilization for propellant production. This on-site production of propellant will allow for greater payload allocation instead of fuel to travel to the Mars surface, and refueling of propellants to travel back to Earth. More useable mass yields a greater benefit to cost ratio. The University of Texas at El Paso's (UTEP) Center for Space Exploration and Technology Research Center (cSETR) aims to further advance these …

An Experimental Investigation Of Self-Excited Combustion Dynamics In A Single Element Lean Direct Injection (Ldi) Combustor, Rohan M. Gejji

Open Access Dissertations

The management of combustion dynamics in gas turbine combustors has become more challenging as strict NOx/CO emission standards have led to engine operation in a narrow, lean regime. While premixed or partially premixed combustor configurations such as the Lean Premixed Pre-vaporized (LPP), Rich Quench Lean burn (RQL), and Lean Direct Injection (LDI) have shown a potential for reduced NOx emissions, they promote a coupling between acoustics, hydrodynamics and combustion that can lead to combustion instabilities. These couplings can be quite complex, and their detailed understanding is a pre-requisite to any engine development program and for the development of predictive capability …

Physical Properties, Evaporation And Combustion Characteristics Of Nanofluid-Type Fuels, Saad Tanvir

Open Access Dissertations

Nanofluids are liquids with stable suspension of nanoparticles. Limited studies in the past have shown that both energetic and catalytic nanoparticles once mixed with traditional liquid fuels can be advantageous in combustion applications, e.g., increased energy density and shortened ignition delay. Contradictions in existing literature, scarcity of experimental data and lack of understanding on how the added nanoparticles affect the physical properties as well as combustion characteristics of the resulting fuel motivated us to launch a detailed experimental and theoretical investigation.

The surface tension of ethanol and n-decane based nanofluid fuels containing suspended nanoparticles were measured using the pendant drop …

The Validation And Verification Of Les Modeling Using Kiva, David Fyda

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, the use of large-eddy simulation (LES) has grown into new research methods. LES is preferred when compared to Reynold’s Averaged Navier Stokes (RANS), which separates velocity components into steady and fluctuating components. While RANS is relatively easy to implement, it does not fully resolve the range of turbulence eddies and has limitations that make it inaccurate in many practical circumstances. Direct numerical simulation, DNS, fully resolves all turbulent eddies to the smallest grid scale, but requires an extremely fine grid. This makes it computationally impractical to use as the computational power required to solve even the simplest …

High Pressure Combustion And Supersonic Jet Ignition For H2/Air, Michael G. Woodworth, Sayan Biswas, Li Qiao

The Summer Undergraduate Research Fellowship (SURF) Symposium

There are many incentives to increase the fuel efficiency of combustion processes. This paper looks at two available options to achieve this goal. The former aims to develop an experimental method that can analyze combustion at extremely high pressures to improve the understanding of high pressure H2/air combustion. Experimental data has been lacking a suitable combustion diagnostic to visualize high pressure combustion processes, making it difficult to improve the process. Improvement of x-ray diffraction tomography in a windowless combustor makes it possible to see flame propagation at high pressure. The procedure and chamber are still in the design phase, yet …

Laminar Deflagrated Flame Interaction With A Fluidic Jet Flow For Deflagration-To-Detonation Flame Acceleration, Joseph P. Mcgarry

Mechanical & Aerospace Engineering Theses & Dissertations

The concept of the Pulse Detonation Engine (PDE) has been of interest for centuries. The issue was originally studied to understand flame propagation in mine shafts after explosions due to methane buildup. The flames would travel down the shafts, transitioning to turbulent flames due to the roughness of the shaft walls, and accelerate to detonation, delivering powerful, destructive forces. The potential for efficient energy production was noticed, and the theory behind flame propagation was later applied to developing propulsion systems. Recently, researchers have begun to understand the full potential of PDEs to efficiently produce an immense amount of thrust due …

Multi-Injector Modeling Of Transverse Combustion Instability Experiments, Kevin "James " Shipley

Open Access Theses

Concurrent simulations and experiments are used to study combustion instabilities in a multiple injector element combustion chamber. The experiments employ a linear array of seven coaxial injector elements positioned atop a rectangular chamber. Different levels of instability are driven in the combustor by varying the operating and geometry parameters of the outer driving injector elements located near the chamber end-walls. The objectives of the study are to apply a reduced three-injector model to generate a computational test bed for the evaluation of injector response to transverse instability, to apply a full seven-injector model to investigate the inter-element coupling between injectors …

Characterizing G-Loading, Swirl Direction And Rayleigh Losses In An Ultra Compact Combustor, Jacob D. Wilson

Theses and Dissertations

Previous research has been conducted showing significant benefits on combustion efficiency and stability by creating high centripetally accelerated, also known as g-loaded, combustion environments. Ultra Compact Combustor systems decrease size and weight of the overall engine by burning in a circumferential direction around a hybrid vane row where the high equivalence ratio cavity flow is quick quenched to lean by the core flow. The hybrid vane row integrates the compressor, combustor, and turbine for further length reduction and weight savings. Fuel and air are brought into the cavity and combusted in a high g-loaded environment driven by air injection at …

Numerical Study Of The Performance Of A Model Scramjet Engine, Ayad Alhumadi

Mechanical & Aerospace Engineering Theses & Dissertations

A computational parametric investigation was conducted to study the effect of variations to several geometric parameters on the performance of a two-dimensional model scramjet engine (square cross section area for 3-D model). Geometric parameters included backstep location, height, and angle and fuel injector angle, diameter, and location. Two- and three-dimensional geometries have been studied, using a finite-volume computational fluid dynamics (CFD) code (FLUENT) with structured grids with sizes between 50,000 and 90,000 cells for the two-dimensional geometry and with structured hexahedral grid sizes between 650,000 and 949,725 cells for the three-dimensional geometry. Otherwise, identical values of program inputs were utilized …

Effect Of Thermally Induced Deformation In A Supersonic Combustion Facility, Aditya Ajit Gupte

Master's Theses - Daytona Beach

Nastran and ANSYS finite element analysis (FEA) and Wind-US computational fluid dynamics (CFD) solvers are used to simulate the effect of thermal deformation on the reacting flow developing within the University of Virginia (UVa) Supersonic Combustion Facility (SCF). A detailed thermal-structural model is developed to resolve the temperature distribution and the resulting structural deformation taking place within the scramjet engine flowpath. The predicted thermal deformation is used to refine the CFD model and produce a new set of results for direct comparison with experiment during both ramjet and scramjet modes of operation. Improved agreement between CFD and experiment is afforded …

Super-Adiabatic Combustion In Porous Media With Catalytic Enhancement For Thermoelectric Power Conversion, Kyle Thomas Mueller

Electronic Theses and Dissertations

The combustion of ultra-lean fuel to air mixtures provides an efficient way to convert the chemical energy of hydrocarbons into useful power. Conventional burning techniques of a mixture have defined flammability limits beyond which a flame cannot self-propagate due to heat losses. Matrix stabilized porous medium combustion is an advanced technique in which a solid porous matrix within the combustion chamber accumulates heat from the hot gaseous products and preheats incoming reactants. This heat recirculation extends the standard flammability limits and allows the burning of ultra-lean fuel mixtures, conserving energy resources, or the burning of gases of low calorific value, …

Tunable Diode Laser Absorption Spectroscopy Verification Analysis For Use In The Combustion Optimization And Analysis Laser Laboratory, Christina R. Serianne

Theses and Dissertations

The AFIT Combustion Optimization and Analysis Laser (COAL) laboratory has state-of-the-art laser diagnostic capability for combustion process. The research for this thesis served to enhance the COAL lab's capability. Currently, there are no known commercially available tunable diode lasers that produce Ultra-Violet radiation required for this analysis. Sum-frequency generation at 313.5 nm was utilized for high speed OH absorption and temperature measurements at a rate of 2kHz. The Tunable Diode Laser Absorption Spectroscopy system was validated by comparison with theoretical and well characterized experimental data by operating the system over a wide range of conditions for an H2 laminar flame …

Pylon Effects On A Scramjet Cavity Flameholder Flowfield, Andrew B. Freeborn

Theses and Dissertations

Cavity flameholders in supersonic combustion ramjet (scramjet) combustors, while effective, fail to take advantage of the full combustor volume. Adding a pylon to the leading edge of a cavity flameholder generates a flowfield increasing mass exchange between the cavity and main combustor flow, increasing the mixing interface between flameholder products and main combustor flow, and exhibiting minimal Reynolds number effects. To demonstrate this modified flowfield driven by supersonic expansion behind the pylon, pylon-cavity flameholder flowfield data were obtained through a combination of wind tunnel experimentation and steady-state computational fluid dynamics (CFD). Flowfield effects of the pylon-cavity were examined at a …

Validation Of The Afit Small Scale Combustion Facility And Oh Laser-Induced Fluorescence Of An Atmospheric Laminar Premiext Ed Flame, Stephen J. Koether

Theses and Dissertations

Construction in the AFIT combustion facility is complete and the objective of this report is to explain the steps taken to make the laboratory operational. The infinite radius Ultra-Compact Combustor (UCC) sectional model has been delivered and is fully installed with all fuel, air and instrument lines. Every major system in the lab has been tested and is functioning properly. Laboratory operating procedure has been established to ensure both safety and continuity in experimental results. Finally, the lab has been certified through official safety channels and combustion experiments are underway. The unique capability of the AFIT combustion laboratory is the …

Design, Construction, And Validation Of The Afit Small Scale Combustion Facility And Section Model Of The Ultra-Compact Combustor, Wesley S. Anderson

Theses and Dissertations

The AFIT small-scale combustion facility is complete and its first experiment designed and built. Beginning with the partially built facility, detailed designs have been developed to complete the laboratory in order to run small-scale combustion experiments at atmospheric pressure. A sectional model of the Ultra-Compact Combustor has also been designed and built. Although the lab's specific design intent was to study the UCC's cavity-vane interaction, facility flexibility has also been maintained for future work. The design enabled the completion of liquid fuel and air delivery systems, power and control systems, and test equipment. The design includes failsafe operation, remote control, …

Shock-Tube Investigation Of Ignition Delay Times Of Blends Of Methane And Ethane With Oxygen, Brian Christopher Walker

Electronic Theses and Dissertations

The combustion behavior of methane and ethane is important to the study of natural gas and other alternative fuels that are comprised primarily of these two basic hydrocarbons. Understanding the transition from methane-dominated ignition kinetics to ethane-dominated kinetics for increasing levels of ethane is also of fundamental interest toward the understanding of hydrocarbon chemical kinetics. Much research has been conducted on the two fuels individually, but experimental data of the combustion of blends of methane and ethane is limited to ratios that recreate typical natural gas compositions (up to ~20% ethane molar concentration). The goal of this study was to …

Performance Measurements Of Direct Air Injection In A Cavity-Based Flameholder For A Supersonic Combustor, Scott G. Edens

Theses and Dissertations

For several years the Air Force Research Lab Propulsion Directorate has been studying the difficulties in fueling supersonic combustion ramjet engines with hydrocarbon based fuels. Recent investigations have focused on the use of direct air injection into a directly-fueled cavity-based flameholder. Direct air injection has been shown qualitatively to be a valuable tool for improving cavity combustion. Little quantitative data is available that characterizes the performance of cavity-based flameholders. The objective of this research was to quantitatively determine the specific advantages and disadvantages of the direct air injection scheme. This was accomplished via intrusive probing into a supersonic free stream …

An Investigation Of The Autoignition Of Power Generation Gas Turbine Fuel Blends Using A Design Of Experiments Approach, Jaap De Vries

Electronic Theses and Dissertations

Natural gas has grown in popularity as a fuel for power generation gas turbines. However, changes in fuel composition are a topic of concern since fuel variability can have a great impact on the reliability and performance of the burner design. In particular, autoignition of the premixed fuel and air prior to entering the main burner is a potential concern when using exotic fuel blends. To obtain much-needed data in this area, autoignition experiments for a wide range of likely fuel blends containing CH4 mixed with combinations of C2H6, C3H8, C4H10, C5H12, and H2 were performed in a high-pressure shock …

Numerical Study Of Combustion Of Hydrogen And Ethylene In A Two-Dimensional Dual-Mode Scramjet Combustor, Robert A. Carson

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents computational fluid dynamics results for two-dimensional flow geometries utilizing two fuels, hydrogen (H2) and ethylene (C2H4). Upstream interaction was evident with the use of both fuels due in part to recirculation in the combustor, the inlet pressures and the combustion process. Results were obtained for hydrogen using a reduced chemical kinetic model while results obtained for ethylene employed a reduced chemical kinetic model as well as an expanded chemical kinetic model.

Initially, an examination of grid composition was conducted in order to select the most numerically efficient and accurate grid for reacting flow in the current combustor …

Supersonic Combustion And Mixing Characteristics Of Hydrocarbon Fuels In Screamjet Engines, Ahmed A. Taha

Mechanical & Aerospace Engineering Theses & Dissertations

The combustion characteristics of gaseous propane in supersonic airflow using the rearward-facing step that is swept inward from both end sides is studied. The effect of sweeping the step on the flow field features of propane combustion is investigated.

The study of the supersonic combustion of ethylene is carried out using different combustor configurations, different main fuel equivalence ratios, and different pilot fuel equivalence ratios.

The swept step shows the ability to hold the propane flame in the supersonic air stream without extinction. It was found that the side sweeping of the combustor exhibits the high temperature and combustion products …

Flow Diagnostics, Chemically Reacting Turbulent Flow Modeling And Turbulent Mixing : A Summary Of Project Studies In Combustion, Bahman Ghorashi

Scholarship Collection

No abstract provided.

Studies On Nonequilibrium Phenomena In Supersonic Chemically Reacting Flows, Rajnish Chandrasekhar

Mechanical & Aerospace Engineering Theses & Dissertations

This study deals with a systematic investigation of nonequilibrium processes in supersonic combustion. The two-dimensional, elliptic Navier-Stokes equations are used to investigate supersonic flows with nonequilibrium chemistry and thermodynamics, coupled with radiation, for hydrogen-air systems. The explicit, unsplit MacCormack finite-difference scheme is used to advance the governing equations in time, until convergence is achieved.

For a basic understanding of the flow physics, premixed flows undergoing finite rate chemical reactions are investigated. Results obtained for specific conditions indicate that the radiative interactions vary substantially, depending on reactions involving HO$\sb2$ and NO species, and that this can have a noticeable influence on …