Aerospace Engineering Commons^™

Transfers To A Gravitational Saddle Point: An Extended Mission Design Option For Lisa Pathfinder, Andrew D. Cox

Open Access Theses

Any possible LISA Pathfinder extended mission will immediately follow the primary mission after completion of scientific observations and technical demonstrations in a Sun-Earth L1 libration point orbit. One extended mission concept with scientific appeal is a spacecraft path that includes multiple encounters with a gravitational equilibrium point. This point, also termed a saddle point, exists where the total gravitational acceleration sums to zero and is distinct from the five Lagrange points in the three-body problem. This investigation seeks a strategy to design such a path subject to a variety of constraints. Periodic, quasi-periodic, and manifold structures are explored to …

Phase Of Flight Identification In General Aviation Operations, Valentine Pascale Goblet

Open Access Theses

Identifying phases of flight in General Aviation can help in identifying safety events, which are events which may result in the aircraft being in a hazardous state. Unlike commercial operations that have well-defined phases of flight such as taxi, takeoff, climb, cruise, descent, approach, and landing, GA missions have more hard-to-identify phases of flight. For example, pilot training missions can involve multiple “touch-and-go” maneuvers, which make it difficult to define a distinct cruise phase during the patterns. Here, we present an algorithm to automatically identifying phases of flight in GA. The method includes an algorithm to tailor the phase of …

Dynamic Sensor Tasking And Imm Ekf Estimation For Tracking Impulsively Maneuvering Satellites, Arthur A. Lace

Open Access Theses

In order to efficiently maintain space situational awareness, care must be taken to optimally allocate expensive observation resources. In most situations the available sensors capable of tracking spacecraft have their time split between many different monitoring responsibilities. Tracking maneuvering spacecraft can be especially difficult as the schedule of maneuvers may not be known and will often throw off previous orbital models. Effectively solving this tasking problem is an ongoing focus of research in the area of space situational awareness. Most methods of automated tasking do not make use of interacting multiple model extended Kalman filter techniques to better track satellites …

An Experimental Comparison Of Diffuser Designs In A Centrifugal Compressor, Cam-Tu Jeanne Methel

Open Access Theses

The objective of this investigation was to compare the effects of two different diffuser vane geometries on the performance of a centrifugal compressor. Vaned diffusers are commonly used in aeroengines because they can achieve higher pressure recoveries than vaneless diffusers of similar size. Improving the diffuser’s pressure recovery and effectiveness can result in overall compressor performance benefits that are sought out by engine manufacturers looking to improve overall engine efficiency. An airfoil vane was tested and compared to a baseline wedge diffuser in the Purdue CSTAR research facility, where the centrifugal compressor used for this study is intended to be …

Unsupervised Learning Framework For Large-Scale Flight Data Analysis Of Cockpit Human Machine Interaction Issues, Abhishek B. Vaidya

Open Access Theses

As the level of automation within an aircraft increases, the interactions between the pilot and autopilot play a crucial role in its proper operation. Issues with human machine interactions (HMI) have been cited as one of the main causes behind many aviation accidents. Due to the complexity of such interactions, it is challenging to identify all possible situations and develop the necessary contingencies. In this thesis, we propose a data-driven analysis tool to identify potential HMI issues in large-scale Flight Operational Quality Assurance (FOQA) dataset. The proposed tool is developed using a multi-level clustering framework, where a set of basic …

Tadpole Orbits In The L4/L5 Region: Construction And Links To Other Families Of Periodic Orbits, Alexandre G. Van Anderlecht

Open Access Theses

The equations of motion in the Circular Restricted Three-Body Problem (CR3BP) allow five equilibrium solutions, that is, the Lagrange or libration points. Two of the five equilibrium solutions are the triangular or equilateral libration points, L4 and L 5. As the secondary gravitational body moves in its orbit about the larger mass, L4 and L5 lead and trail the secondary by 60 degrees, respectively. This investigation focuses on periodic solutions in the vicinity of the triangular libration points, specifically horseshoe and tadpole orbits. Horseshoe orbits are symmetric periodic solutions in the plane of primary motion encompassing both …

A Transfer Network Linking Earth, Moon, And The Triangular Libration Point Regions In The Earth-Moon System, Lucia R. Capdevila

Open Access Dissertations

In the near future, several space applications in the Earth-Moon system may require a spacecraft to hold a stable motion, but the transfer trajectory infrastructure to access such stable motions has not been fully investigated yet. The triangular libration points, L 4and L5, in the Earth-Moon system have long been thought of as ideal locations for a communications satellite. Recently, Distant Retrograde Orbits (DROs) and Near-Rectilinear Halo Orbits (NRHOs) near the Moon have been identified as motion of interest for manned and unmanned missions with a focus on operations in cislunar space. The triangular libration points, as well as …

Coupled Orbit-Attitude Mission Design In The Circular Restricted Three-Body Problem, Davide Guzzetti

Open Access Dissertations

Trajectory design increasingly leverages multi-body dynamical structures that are based on an understanding of various types of orbits in the Circular Restricted Three-Body Problem (CR3BP). Given the more complex dynamical environment, mission applications may also benefit from deeper insight into the attitude motion. In this investigation, the attitude dynamics are coupled with the trajectories in the CR3BP. In a highly sensitive dynamical model, such as the orbit-attitude CR3BP, periodic solutions allow delineation of the fundamental dynamical structures. Periodic solutions are also a subset of motions that are bounded over an infinite time-span (assuming no perturbing factors), without the necessity to …

A Study On Flow Development In An Apu-Style Inlet And Its Effect On Centrifugal Compressor Performance, Fangyuan Lou

Open Access Dissertations

The objectives of this research were to investigate the flow development inside an APU-style inlet and its effect on centrifugal compressor performance. The motivation arises from the increased applications of gas turbine engines installed with APU-style inlets such as unmanned aerial vehicles, auxiliary power units, and helicopters. The inlet swirl distortion created from these complicated inlet systems has become a major performance and operability concern. To improve the integration between the APU-style inlet and gas turbine engines, better understanding of the flow field in the APU-style inlet and its effect on gas turbine is necessary.

A research facility for the …

Dynamic Transverse Debondong Of A Single S-2 Fiber, Stephen E. Levine

Open Access Theses

Fiber reinforced composites are becoming increasingly common due to their high strength to weight ratios as compared to more conventional materials. Along with this increased used comes the need to have a higher level of understanding of the material characteristics. Specifically, the interface between the fiber and matrix is of particular interest. Loss of adhesion at this interface, known as debonding, can greatly decrease material strength. There has been significant research into debdonding phenomena at low strain rates. However, there is still a need for further insight at higher strain rates. In addition, given the opacity of many epoxy resins, …

The Aerodynamic And Dynamic Loading Of A Slender Structure By An Impacting Tornado-Like Vortex: The Influence Of Relative Vortex-To-Structure Size On Structural Loading, Matthew Nicholas Strasser

Graduate Theses and Dissertations

Structural loading produced by an impacting vortex is a hazardous phenomenon that is encountered in numerous applications ranging from the destruction of residences by tornados to the chopping of tip vortices by rotors. Adequate design of structures to resist vortex-induced structural loading necessitates study of the phenomenon that control the structural loading produced by an impacting vortex. This body of work extends the current knowledge base of vortex-structure interaction by evaluating the influence of the relative vortex-to-structure size on the structural loading that the vortex produces. A computer model is utilized to directly simulate the two-dimensional impact of an impinging …

Design Of Elastic Metamaterials, Yu-Chi Su

Open Access Dissertations

This study focused on the design and fabrication of a double negativity and three broadband single negativity elastic metamaterials using a 3D printer. We investigated dispersion curves and dynamic material properties of the metamaterials. Negative phase velocity in the double negativity metamaterial was also demonstrated.

For metamaterials with single negativity, three types of broadband metamaterials were designed from parametric studies. A comparison showed that using frame bending/stretching mode is more effective than applying beam bending mode to broaden bandgap. Furthermore, it is found that adding internal resonant components could enlarge the bandgap. The single negativity metamaterials were validated by numerical …

Studies Of Systems With Nonholonomic Constraints: The Segway And The Chaplygin Sleigh, Joseph Troy Lee Tuttle

Open Access Theses

In this thesis, two systems with nonholonomic systems are investigated: the Segway and the Chaplygin sleigh. Using Lagrangian mechanics, the constrained nonlinear equations of motion for both systems are derived. By use of the nullspace of the constraint matrices, the unconstrained equations of motion can be obtained. For the Segway, these equations are linearized about a zero equilibrium state, placed into state space form and decoupled. A feedback controller is designed about the velocity and heading angle rate reference commands. To compare to the real data from the built Segway, measurement noise was also included in the model. Experimental data …

A Computational Analysis Of The Aerodynamic And Aeromechanical Behavior Of The Purdue Multistage Compressor, David Monk

Open Access Theses

Compressor design programs are becoming more reliant on computational tools to predict and optimize aerodynamic and aeromechanical behavior within a compressor. Recent trends in compressor development continue to push for more efficient, lighter weight, and higher performance machines. To meet these demands, designers must better understand the complex nature of the inherently unsteady flow physics inside of a compressor. As physical testing can be costly and time prohibitive, CFD and other computational tools have become the workhorse during design programs.

The objectives of this research were to investigate the aerodynamic and aeromechanical behavior of the Purdue multistage compressor, as well …

Solar Sail Trajectory Design In The Earth-Moon Circular Restricted Three Body Problem, Ashwati Das

Open Access Theses

The quest to explore the Moon has helped resolve scientific questions, has spurred leaps in technology development, and has revealed Earth's celestial companion to be a gateway to other destinations. With a renewed focus on returning to the Moon in this decade, alternatives to chemical propulsion systems are becoming attractive methods to efficiently use scarce resources and support extended mission durations. Thus, an investigation is conducted to develop a general framework, that facilitates propellant-free Earth-Moon transfers by exploiting sail dynamics in combination with advantageous transfer options offered in the Earth-Moon circular restricted multi-body dynamical model. Both periodic orbits in the …

Evaluating Optimum Levels Of Detail For 3d Interactive Aviation Maintenance Instructions, Nicholas Rohe

Open Access Theses

With the aviation industry shifting from paper based maintenance instructions to digital maintenance instructions, there needs to be a standard for what goes into creating the digital instructions. This study was done to determine what the optimum level of detail for 3D interactive aviation maintenance instructions. The definition of optimum for this study was: lowest amount of geometrical data with lowest rendering needed for comprehension and ease of use.

Augmented Reality Application Utility For Aviation Maintenance Work Instruction, John Bryan Pourcho

Open Access Theses

Current aviation maintenance work instructions do not display information effectively enough to prevent costly errors and safety concerns. Aircraft are complex assemblies of highly interrelated components that confound troubleshooting and can make the maintenance procedure difficult (Drury & Gramopadhye, 2001). The sophisticated nature of aircraft maintenance necessitates a revolutionized training intervention for aviation maintenance technicians (United States General Accounting Office, 2003). Quite simply, the paper based job task cards fall short of offering rapid access to technical data and the system or component visualization necessary for working on complex integrated aircraft systems. Possible solutions to this problem include upgraded standards …

Rapid Indirect Trajectory Optimization On Highly Parallel Computing Architectures, Thomas Antony

Open Access Theses

Trajectory optimization is a field which can benefit greatly from the advantages offered by parallel computing. The current state-of-the-art in trajectory optimization focuses on the use of direct optimization methods, such as the pseudo-spectral method. These methods are favored due to their ease of implementation and large convergence regions while indirect methods have largely been ignored in the literature in the past decade except for specific applications in astrodynamics. It has been shown that the shortcomings conventionally associated with indirect methods can be overcome by the use of a continuation method in which complex trajectory solutions are obtained by solving …

A Dynamic Stochastic Model For Converging Inbound Air Traffic, Jun Chen

Open Access Theses

Weather accounts for the majority of congestion in the National Airspace System which highlights the importance of addressing weather uncertainty to mitigate delays, and this paper presents an effort in this direction. Firstly, a new dynamic stochastic 0-1 Integer Programming (IP) model is proposed, which models the Single Airport Ground Holding Problem (SAGHP) with respect to uncertainty in the separation between flights instead of Airport Acceptance Rate (AAR) or landing capacity. Uncertainty in separation according to different weather conditions is represented through the scenario tree by using stochastic linear programming. Considering time separation constraints instead of AAR constraints, our model …

Digital Image Correlation Of Heterogeneous Deformations In Polycrystalline Material With Electron Backscatter Diffraction, Javier Esquivel

Open Access Theses

This work establishes the ability to conduct digital image correlation (DIC) investigations at varying length scales. DIC allows for a computational method of strain field measurements using multiple images to track random speckle patterns on material surfaces. The use of a powder silicon oxide speckle allows for high optical magnification correlation using conventional load frames. Self-assembling gold nanoparticles provide sub-micron resolution speckle patterns to study microstructure influences on deformation using scanning electron microscopy. The complex microstructure in aerospace grade aluminum and nickel-based superalloys, give rise to varied deformation fields, which can be studied using electron backscatter diffraction. Specimen preparation techniques, …

Principle Of Bio-Inspired Insect Wing Rotational Hinge Design, Fan Fei

Open Access Theses

A principle for designing and fabricating bio-inspired miniature artificial insect flapping wing using flexure rotational hinge design is presented. A systematic approach of selecting rotational hinge stiffness value is proposed. Based on the understanding of flapping wing aerodynamics, a dynamic simulation is constructed using the established quasi-steady model and the wing design. Simulations were performed to gain insight on how different parameters affect the wing rotational response. Based on system resonance a model to predict the optimal rotational hinge stiffness based on given wing parameter and flapping wing kinematic is proposed. By varying different wing parameters, the proposed method is …

Distinguishing Harmonic Behavior Of Longitudinal Resonant Combustion In A Variable Geometry Model Rocket Combustor, Sarah W. Hester

Open Access Theses

Throughout the study of high frequency combustion instability in a single element Continuously Variable Resonance Combustor (CVRC), the excitation of the fundamental longitudinal mode is closely followed by the excitation of higher harmonic modes. In an attempt to establish a heuristic relationship between the appearances of the fundamental mode and its harmonics, several unstable fixed geometry and variable geometry tests from the CVRC are analyzed through traditional Fourier-based methods and alternative signal processing methods such as wavelet analysis and Instantaneous Frequency (IF) Analysis from PC Signal Analysis. Early results led to the conclusion that traditional Fourier-based analysis provides believable and …

Crossflow Transition At Mach 6 On A Cone At Low Angles Of Attack, Ryan O. Henderson

Open Access Theses

Experiments on a sharp 7-degree cone at low angles of attack were conducted at Mach 6 to understand the stationary and traveling modes of crossflow disturbances, the interaction between them, and the development of other instabilities that can lead to transition. Using the Boeing/AFOSR Mach-6 Quiet Tunnel (BAM6QT), pressure and temperature measurements were collected to better describe crossflow characteristics. Noisy and quiet flow conditions were compared to understand crossflow development. Temperature Sensitive Paint (TSP) was used to measure the global surface temperatures on the model. Schmidt-Boelter (SB) gauges were used to convert the surface temperatures to heat transfer. The global …

Joint Architecture For Reusable Vehicle-Integrated Software (J.A.R.V.I.S), Anthony Mark Kane

Open Access Theses

An integrated software architecture for development of unmanned research vehicles is developed. It has been created under the premise that all unmanned vehicles require a core set of functionality that is common across platforms and that priority should be to the readability and reusability of the code base. The architecture defines the top-level system interfaces allowing internal algorithms to be manipulated without affecting the rest of the system. A robust aerospace toolbox has been developed that provides a means to rapidly prototype algorithms without the need of recreating commonly used functions or the use of expensive, proprietary software.

Dynamic Wireless Power Transfer System For The Unmanned Aerial Vehicles, Tae Sup Lee

Open Access Theses

UAVs have limitless applications to help our daily lives for the autonomous operations. UAVs have a limited power capacity due to weight constraints and are therefore not able to travel long distances. Ground stations for recharging UAVs throughout different points can increase the flight time of the UAVs with the current UAV battery capacity. This study investigates how the wireless charging system for the ground station can be made more robust when there are misalignments. The wireless charging system is monitored by an Arduino, micro controller, to assess the current condition of charging. The Arduino is able to change the …

Mode I Fatigue Delamination Onset Of Carbon Fibre Reinforced Polymer With Novel Post-Cure Throughthickness Reinforcement, Christopher John Kourloufas

Open Access Theses

A novel trough thickness reinforcement (TTR) technique, proposed by Kravchenko et al., has been tested under mode I fatigue loading conditions in order to investigate characterisation of the onset of delamination growth in unidirectional 8552/IM7. The experimental results, following standard test method ASTM D6115-13, indicate that the mode I fatigue delamination onset behaviour can be altered by the inclusion of TTR both ahead and behind the crack tip. Tests have been conducted at a wide range of maximum displacement values, corresponding to percentages of the critical fracture toughness value determined for the maternal, GIC . The results were found …

Evaluating Intensity As A Controller Function For Nextgen Scenarios With Increased Capacity, Caitlin Anne Surakitbanharn

Open Access Theses

Automated separation assurance is the most mature concept to handle increasing airspace traffic and capacity needs, yet the system lacks a way to pre-emptively identify aircraft separation problems. The intensity control measure looks to find situations where if an aircraft pair makes an unplanned change in heading or altitude at the wrong moment, an unrecoverable situation arises. This research analyzes static, open loop air traffic data in an en-route sector to determine how many high intensity aircraft pairs (HIP) exist per minute, and if the intensity measure is a safely manageable function for air traffic controllers. It is found that …

Catalysts For Portable, Solid State Hydrogen Genration Systems, Jason Robert Gabl

Open Access Theses

Hydrogen and air powered proton exchange membrane fuel cells are a potential alternative to batteries. In portable power systems, the design requirements often focus on cost efficiency, energy density, storability, as well as safety. Ammonia borane (AB), a chemical hydride containing 19.6 wt. % hydrogen, has a high hydrogen capacity and is a stable and non-toxic candidate for storing hydrogen in portable systems.

Throughout this work, Department of Energy guidelines for low power portable hydrogen power systems were used as a baseline and comparison with commercially available systems. In order to make this comparison, the system parameters of a system …

Numerical Simulation Of Hydrogen Plasma In Mpcvd Reactor, Di Huang

Open Access Theses

A numerical study was conducted to build a model able to estimate the plasma properties under different working conditions for pure hydrogen plasma in a MPCVD reactor. A plasma model based on standing wave assumption and a linear estimation of ne and coupled the EM simulation, heat transfer simulation and UDF calculations of plasma properties was built in COMSOL Muitiphysics and tested with six different working conditions. The reliability of COMSOL EM solver was tested through comparing the simulation results with a benchmark EM solver, ANSYS HFSS. The validities of two assumptions made about the electrical field, standing wave assumption …

Multi-Injector Modeling Of Transverse Combustion Instability Experiments, Kevin "James " Shipley

Open Access Theses

Concurrent simulations and experiments are used to study combustion instabilities in a multiple injector element combustion chamber. The experiments employ a linear array of seven coaxial injector elements positioned atop a rectangular chamber. Different levels of instability are driven in the combustor by varying the operating and geometry parameters of the outer driving injector elements located near the chamber end-walls. The objectives of the study are to apply a reduced three-injector model to generate a computational test bed for the evaluation of injector response to transverse instability, to apply a full seven-injector model to investigate the inter-element coupling between injectors …