Aerospace Engineering Commons^™

Flying Wing Uav For Surveillance And Object Tracking, Kristen Padgett, Scott Semmelink, Jared Lasley, Paul Horne

Senior Design Project For Engineers

Unmanned aerial vehicles (UAV) have become ubiquitous in recent years due to their adaptability and ease of use. Surveillance UAVs in particular have seen increased interest and usage by law enforcement, civilian security, surveying, and federal services. The increased interest has led to the development of UAVs with increased endurance and payload capacity. Further as many of the applications of surveillance drones involve heightened security requirements, an aircraft of domestic make is preferential to many organizations. With this demand in mind, Inspired Products, LLC put forth a request for assistance in the design and testing of a surveillance UAV. More …

Plasma Aerodynamics: Experimental Quantification Of The Lift Force Generated On An Airfoil Using Plasma Actuation To Estimate Power Requirements In Small Uav Applications, Getachew Ashenafi

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research addressed the amount of electric power required to induce specific changes in lift force using a NACA 2127 airfoil with a chord length of ~28 mm, connected to a micro load cell, in a wind tunnel of 103 square centimeter cross-section. A DBD plasma actuator supplied by a ZVS driven high voltage pulsed DC circuit, operating at a frequency of 17.4 kHz, was utilized for voltages of up to 5000 V. Two configurations of electrode gapping were compared to determine the efficient use of power. The configuration with a gap of ~1 mm between the upstream and downstream …

Aircraft Runway Safe Navigation System, David S. Obando Ortegon

Honors College Theses

Aircraft are one of the most used alternatives of traveling long distances and making them safer is a global necessity. For this reason, being able to create a functional prototype where the aircraft would be capable to acquire and process information in real time from the environment generating wingtip collision detection and simulation of a collection of exteroceptive sensors is necessary in progressing air flight safety systems. The aim of this project is to design and build, an electronic aircraft undercarriage composed with multiple exteroceptive sensors that will be able to determine and process digital information of the aircraft envelope, …

Experimental Study Of A Liquid Fuel Bluff Body Flame At Elevated Pressures, Karam Paul

Honors Undergraduate Theses

The purpose of this research was to operate a bluff body flame holder with the objective of stabilizing a flame at elevated pressures over a range of equivalence ratios. The ability to have a ground-based test rig capable of maintaining stable flames at high pressures and temperatures is critical in understanding flames present in modern jet engines and gas turbine technologies. The facility was reconfigured multiple times and the resultant flame was imaged within the optical test section. A converging nozzle was utilized to choke the flow and vary the operating pressures up to 5 atm. By regulating mass flow …

Very Light Jet Trainer (Vlj) - Phoenix Iv, Saxton Robinson, Eric Gentry, Daniyel Holmes, Navee Cheng

Senior Design Project For Engineers

This project was pursued to bring another possible solution to a major problem within the pilot training industry. When it comes to pilots training with aircraft, they must often use repurposed older aircraft to log their training hours. With few options when it comes to aircraft that are designed specifically for training, we have researched, modeled, and simulated tests for our own trainer jet to add to the market. The aircraft was designed to seat 4-8 people (1-2 for crew and 2-6 for passengers), weigh less than 10,000 lbs., have a range of about 1195.5 nautical miles, have a max …

Automating Aerospace Synthesis Code Generation A Tool For Generic Vehicle Design And Technology Forecasting, Thomas Peter Mccall

Mechanical and Aerospace Engineering Dissertations - Archive

The principal development and deliverable of this research is a generic synthesis assembling decision support environment for early conceptual design that automates the assembly of synthesis architectures for enhanced product exploration and technology forecasting. The objective of this research is to develop a baseline environment to assess complex vehicle automated synthesis architecture synthetization procedures for adaptation into a greater cognitive system. This tool has been developed as a precursory and developmental task in an initiative towards an artificial intelligence design and research assistant peer. The artificial intelligence peer is a perceived course for future design system evolution in the continued …

Celebrating 90-Orbits Around The Sun, Stafford Air & Space Museum

Programs

In celebration of the 90th birthday of Oklahoma astronaut and aerospace legend, Gen. Thomas P. Stafford, the Stafford Air & Space Museum in Weatherford, Oklahoma is offering free admission on September 17th, 2020.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Safran Seat Attachment System, Craig John Kimball, Tyler Bragg, Lynette Cox

Mechanical Engineering

This final design review (FDR) document outlines the senior design project being carried out by a team of mechanical engineering undergraduate students attending California Polytechnic State University, San Luis Obispo for Safran Seats in Santa Maria, CA. The project originally was to design, build, and test a universal attachment to secure a widebody business class seat to seven aircraft models with different seat track geometry. The goal was to design, document, and create a finished product that fits design, weight, and manufacturing requirements, as well as passes static 9G FWD testing. Structural analysis, manufacturing analysis, FEA, and CAD assemblies will …

Global Technology Economic Analysis Paradigm, Iwasan D. Kejawa Ed.D

School of Computing: Faculty Publications

Abstract

Is true that it is not only the consumers that make the economy prospers? Business and government also play a role in the economy of a country and corporation. “The GLOBAL technology economy is driven perhaps by the example of a consumer-based society and capital driven citizenry," according to the article in the investor guide of 2013. The role of the government is very important in businesses, organizations and consumers alike depending on the decisions made by the government officials spending of the government. Research have indicated that dependencies of government, organizations, businesses and consumers are intertwine or intermediary. …

Characterization Of Directed Energy Deposition Additively Manufactured Grcop-42 Alloy, Scott Landes

Electronic Theses and Dissertations

GRCop is an alloy family constructed of copper, chromium, and niobium and was developed by NASA for high heat flux applications. The first of its kind, GRCop-84, was specifically designed for the environments seen by channel cooled main combustion chamber liners. To further increase thermal conductivity while maintaining material strength characteristics, the percentage of alloying elements were cut in half and GRCop- 42 was developed. In recent years, NASA has successfully additively manufactured GRCop with comparable material characteristics to wrought GRCop using a Laser Powder Bed Fusion (L-PBF) process. Benefits of this process include fabrication of intricate cooling channels as …

In-Situ Measurement Of Resin Shrinkage For Aerospace Components, Samarth Motagi

Doctoral Dissertations and Master's Theses

Resin shrinkage due to chemical changes and thermal gradients plays an important role in the residual stress evolution during composite manufacturing. In this thesis, we develop a new in-situ experimental approach for measuring resin shrinkage during curing with the help of digital image correlation (DIC) instrumented on a specially designed autoclave with borosilicate viewports. The images of the resin sample are captured at regular intervals with the help of DIC to measure the displacement and strains during the curing process. We utilize this method for a comparative analysis of resin shrinkage in two common aerospace epoxies, Epoxy 105 and EPON …

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Graduate Student Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

Extreme Altitude Search And Rescue Helicopter, Matthew J. De Sieno, Anthony Chavarria, David Stuver, Zach Boss

Senior Design Project For Engineers

The goal of this design was to develop an extreme altitude rescue helicopter capable of retrieving hikers stranded on top of Mount Everest. Using the Eurocopter AS350 as a baseline, a conceptual model was produced that is fully capable of hovering and delivering forward flight at the desired altitude of 8,848 meters. Combined blade element momentum theory, proper airfoil selection, and forward flight calculations were utilized in order to optimize the rotor for the given flight conditions on top of Mount Everest. Conceptual fluid dynamics and CAD modeling aided in the process of visually designing the fuselage and rotor. Not …

Sweep And Taper Analysis Of Surfboard Fins Using Computational Fluid Dynamics, Brandon James Baldovin

Master's Theses

The research presented here provides a basis for understanding the hydrodynamics of surfboard fin geometries. While there have been select studies on fins there has been little correlation to the shape of the fin and its corresponding hydrodynamic performance. This research analyzes how changing the planform shape of a surfboard fin effects its performance and flow field. This was done by isolating the taper and sweep distribution of a baseline geometry and varying each parameter individually whilst maintaining a constant span and surface area. The baseline surfboard fin was used as a template in Matlab to generate a set of …

Strategies In Developing An Aviation & Aerospace Skill Ecosystem For The State Of Telangana, India – Case Study Of Task -Telangana Academy For Skill And Knowledge, Kim Chua, Sujiv Nair, M.P Ganesh Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The aviation & aerospace sector in India has been expanding and growing through partnerships and new research facilities, thereby encouraging more players to invest and optimize the manufacturing process. Improving green and fuel-efficient technologies have contributed to a steady rise in fuelling the demand for aerospace engineers.

The state of Telangana is fast emerging as a new aviation cluster with some of the country’s best-qualified engineers and technicians. The potential of the aerospace industry is immense as it continuously requires skilled technicians and engineers. Considering the precision of skill required, it is imperative that rigorous training be imparted to all …

Investigating Using Titanium Zirconium Molybdenum For Additively Manufacturing Aerospace Components, Justin Hunter Vanhoose

Open Access Theses & Dissertations

Mankind throughout history has possessed an innate characteristic to explore, migrating to new frontiers.The requirement for this travel is most broadly associated with the need to pursue more resources. Rockets have been used as a means of weapons since the Sung Dynasty in the thirteenth empire and have now been integrated for travel/transport. The sophistication of rocketry and propulsion has reached a level to where it is plausible that mankind will be a multi-planetary species. The space industry has grown significantly with the advancement of the sophistication of these rocket technologies. However, a specific challenge to overcome in the space …

Ultraviolet Imager Application For A Cube Satellite, Jason Grillo, Troy Hajjar, Brady Hill

Mechanical Engineering

This document serves as the final design review (FDR) report for the 2018 Cal Poly CubeSat Ultraviolet Imager senior project, sponsored by UC Berkeley Space Sciences Laboratories (SSL). SSL wants to monitor the ionosphere above Earth to gain a better understanding of its properties and particle interactions. Far Ultraviolet (FUV) imaging is a good way to obtain high quality images of the ionosphere and the Earth's auroras, and advancement in optic technologies have made cube satellites (CubeSats) an ideal vessel for a FUV imager, as they are relatively low-cost, lightweight, and can be repeatedly deployed. These CubeSat FUV imagers could …

Flight Vehicle Design, Andrew Ning

Books

No abstract provided.

Parametrization Of Triple Screw Pumps For Aerospace Applications, Allison Putira

Doctoral Dissertations and Master's Theses

Triple Screw Pumps, a form of positive displacement pump, offer steady, high-pressure flow. In very small launch vehicles or upper stages turbopumps are not practical. This paper examines the performance of triple screw pumps to determine if they may serve as an alternative to turbopumps for use in small launch vehicles or upper stages. To this end, the geometry of the screws is first determined from the relative sizes of the screws and tooth height. From this — along with the screw angle and screw clearance — the performance parameters of flow rate, output pressure, and efficiency can be computed. …

Thermal Modelling And Validation Of Heat Profiles In An Rf Plasma Micro-Thruster, Alec Sean Henken

Master's Theses

The need and demand for propulsion devices on nanosatellites has grown over the last decade due to interest in expanding nanosatellite mission abilities, such as attitude control, station-keeping, and collision avoidance. One potential micro-propulsion device suitable for nanosatellites is an electrothermal plasma thruster called Pocket Rocket. Pocket Rocket is a low-power, low-cost propulsion platform specifically designed for use in nanosatellites such as CubeSats. Due to difficulties associated with integrating propulsion devices onto spacecraft such as volume constraints and heat dissipation limitations, a characterization of the heat generation and heat transfer properties of Pocket Rocket is necessary. Several heat-transfer models of …

Assessment And Comparison Of Aviation Manufacturing Industries Throughout Mexico And Brazil, Omar E. Morsi, Kelly A. Whealan-George, Aaron D. Clevenger

International Journal of Aviation, Aeronautics, and Aerospace

This literature review serves to provide insight and understanding in regards to the evolving aviation manufacturing industry throughout the globe and more specifically, Mexico and Brazil. Increased demand for aircraft units both in the commercial and private sectors have led to unprecedented expansions in aircraft manufacturing across the industry. In order to illuminate certain potentials and current growth levels of such industries, this review will delve into an array of information and specifications in regards to economic, political, and cultural influences throughout both Mexican and Brazilian markets respectively. In conclusion, the review will identify the transformation of an aviation manufacturing …

Environmentally Friendly Alternates To Chemlok 233 Adhesive Cement, Madeline M. Busch

Williams Honors College, Honors Research Projects

The purpose of this project was to determine and qualify suitable, environmentally friendly replacement(s) for the current Chemlok 233 adhesive cement used by UTC Aerospace. Chemlok 233 was discontinued by the manufacturer based on the availability of a hazardous solvent (Trichloroethylene – TCE). The Chemlok 233 Control and four Experimental alternates with similar properties were lab tested for adhesion strength in various UTC proprietary cement specifications. The specifications modeled Chemlok’s uses in the construction of pneumatic de-icers. Chemlok 2332 was selected for use in Cement A, and Chemlok 402 was chosen for use in Cement B based on their highest …

Design Of Shape-Conforming Nosecone For Optimal Fluid Flow From Transonic To Supersonic Range, Anna Tombazzi

Williams Honors College, Honors Research Projects

Modern flight vehicles, such as rockets, missiles, and airplanes, experience a force caused by forebody wave drag during the flight. This drag force is induced when the frontal point of each vehicle breaks the pressure wave during flight. Efforts to reduce this wave drag force to improve flight efficiency include modifying the nosecone profile of the flight vehicles to lower the drag force.

This project revolved around creating a design to make the transformation of nosecone shapes from a ¾ Parabolic profile to a ½ Power Series profile possible, mid-flight. Using a novel nosecone assembly, shape memory alloys (SMAs) and …

2015-2016 Eraudb Aiaa Design/Build/Fly Technical Report, Trevor W. Perrott

Student Works

The economic potential of small unmanned aerial vehicles (SUAVs) has been well documented and reported. According to the Association for Unmanned Vehicle Systems International (AUVSI), there is an associated economic impact from the growth of the UAV industry. The goal of the American Institute of Aeronautics and Astronautics Design/Build/Fly Competition Research Program (AIAA DBF CRP) is to investigate design and manufacturing methods for application to SUAVs within the scope of the AIAA DBF Competition.

Students were engaged in the application of aerospace engineering knowledge for the production of a dual-aircraft system. Through the use of Computational Fluid Dynamics (CFD), Computer …

The Effect Of Generation On Retention Of Women Engineers In Aerospace And Industry, Kristine Maria Kiernan

Doctoral Dissertations and Master's Theses

The purpose of this dissertation was to determine the nature and extent of differences between generational cohorts regarding the effect of family factors on retention of women in engineering, with an emphasis on women in the aerospace industry. While 6% of the aerospace workforce is made up of aeronautical engineers, an additional 11.2% of the aerospace workforce is drawn from other engineering disciplines. Therefore, the analysis included all engineering sub-disciplines. In order to include women who had left the workforce, women in all industries were used as a proxy for women in aerospace.

Exits to other fields were modeled separately …

Quantum Computers Are Coming And Will Be Able To Solve Complex Aviation And Aerospace Problems, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

An Iteration On The Horizon Simulation Framework To Include .Net And Python Scripting, Morgan Yost

Master's Theses

Modeling and Simulation is a crucial element of the aerospace engineering design pro- cess because it allows designers to thoroughly test their solution before investing in the resources to create it. The Horizon Simulation Framework (HSF) v3.0 is an aerospace modeling and simulation tool that allows the user to verify system level requirements in the early phases of the design process. A low fidelity model of the system that is created by the user is exhaustively tested within the built-in Day-in-the-Life simulator to provide useful information in the form of failed requirements, system bottle necks and leverage points, and potential …

Investigations Of Synthetic Fuels: S8 And Sasol Ipk To Determine The Possibility Of Alternate Fuels In The Aerospace Industry, Scott M. Dyke

GS4 Student Scholars Symposium

Investigations of Synthetic Fuels: S8 and Sasol IPK to Determine the Possibility of Operation as Alternate Fuels in the Aerospace Industry

Name: Scott Dyke

Co-Authors: Martin Muinos, Julia Heimberger, Dr. Valentin Soloiu,

An ever-growing society that becomes more and more dependent on a finite energy source will eventually exceed its supply. Fossil fuel quantities are continuously decreasing and new solutions are needed. According to the United States Department of Transportation, over 10 billion gallons of airline fuels have been consumed in each of the past 15 years with some years over 13 billion gallons. In the meantime, fuel costs have …

Economic Interrelationships And Impacts Of The Aviation/Aerospace Industry In The State Of Florida Using Input-Output Analysis, Kelly A. Whealan-George

Doctoral Dissertations and Master's Theses

The study provided a detailed description of the interrelatedness of the aviation and aerospace industry with principal industries in Florida and Volusia County (VC) using Input-Output (IO) analysis. Additionally, this research provided an economic impact analysis of the creation of a university research park in Daytona Beach (DB). The economic impact measures included not only direct economic output and industry employment descriptions but also described the multiplier effects in the form of indirect and induced impacts using data for 2012.

This research concluded the average labor income of the aviation and aerospace industry was higher than average labor income in …

Adaptive Control Of Uncertain Systems With Gain Scheduled Reference Models, Mehrdad Pakmehr, Tansel Yucelen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper develops a new model reference adaptive control approach for uncertain systems with gain scheduled reference models in a multi-input multi-output (MIMO) setting. Specifically, adaptive state feedback for output tracking control problem of MIMO nonlinear systems is studied and gain scheduled reference model system is used for generating desired state trajectories. Using convex optimization tools, a single Lyapunov matrix is computed for multiple linearization's near equilibrium and non-equilibrium points of the nonlinear closed loop gain scheduled reference system. This approach guarantees stability of the closed loop gain scheduled system. Adaptive state feedback control scheme is then developed, and its …