Aerospace Engineering Commons^™

A Time-Domain Boundary Integral Equation For Moving Acoustic Sources In Uniform Flow And Its Solution By An Advanced Time Propagation Approach, Fang Q. Hu, Douglas M. Nark

Mathematics & Statistics Faculty Publications

This paper presents a time-domain boundary integral equation (TDBIE) formulation for predicting acoustic scattering from moving sources in a uniform mean flow. This work is motivated by the increasing need for accurate aeroacoustic modeling of modern aircraft configurations, including VTOL and eVTOL systems with rotating components. A key challenge in time-domain scattering simulations with moving sources is the determination of retarded time for a given observer time, which involves solving an implicit equation at each time step. This can be computationally costly, particularly for numerical solution of the TDBIE where every surface element on the scattering body acts as an …

Passive Thermal Control Technologies: Short Course, Holly Mortensen, Matt Ralphs

Space Dynamics Laboratory Publications

• Introduction to Space Dynamics Laboratory
• Overview - Thermal Control Technologies
• Conductor Bars
• Thermal Straps
• Break
• Radiators
• Thermal Switches

Phase Change Cells, T. Shane Topham, Gail Bingham, Harry Latvakoski, Mike Watson

Space Dynamics Laboratory Publications

Outline

• Phase Change Cell Introduction
• Summary of ISS Phase Change Cell Experiments
• Ground Cell Design Improvements and Test Results

Space Dynamics Laboratory, Brent Carlsen, Doug Jewell

Space Dynamics Laboratory Publications

• Space Dynamics Laboratory
• SDL is a UARC
• RE-SET (Re-Engineering, System Engineering & Test)
• System Test Development

Development Of A Design Tool For Tow-Steered Composite Structures With Machine Learning-Assisted Modeling, Bangde Liu

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Fiber-reinforced composites (FRCs) are widely used in aerospace, automotive, and other engineering applications due to their lightweight characteristics and superior mechanical properties. Traditional FRCs employ a fixed fiber orientation in each layer, and while different layup sequences can tailor performance, the mechanical properties remain spatially uniform. Tow-steered composites, which enable fibers to follow curvilinear paths, offer the potential for spatially varying stiffness and strength, improving structural performance.

This dissertation addresses key challenges in modeling and designing tow-steered composite structures, including the lack of commercial design tools, the high computational cost of design optimization, and the need to efficiently evaluate manufacturing …

Deriving Nonlinearity Coefficients From Changing Background, Mark Esplin, Deron Scott, Bryce Walker, Ben Esplin

Space Dynamics Laboratory Publications

Contents

• Quadric Nonlinearity
• Nonlinearity Model and Sensitivity Studies
• Application to CrIS Sensor
• Check Method with Stepped Blackbody Data
• Conclusions

Guidelines For Radiometric Calibration Of Electro-Optical Instruments For Remote Sensing, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

SDL Presentation on Radiometric Calibration of Electro-Optical Instruments for Remote Sensing

Aircraft Turnaround Bottlenecks: Addressing Ground Handling Delays For Operational Excellence, Vigneswaran Cm, Syedeen Khan, Benedict M, Srinath R, Mukesh Pr, Jayaram R Pothnis, Inamul Hasan

International Journal of Aviation, Aeronautics, and Aerospace

Ground handling delays at major airports pose significant challenges, impacting operational efficiency, airline schedules, and passenger satisfaction. This study explores the root causes of these delays, including resource constraints, operational inefficiencies, adverse weather, technical failures, and security issues. By examining case studies from major airports, the report identifies key solutions such as technology integration, infrastructure upgrades, staff training, standardized procedures, and enhanced communication systems. The findings underscore the importance of adopting proactive and collaborative approaches to optimize ground handling operations, ensuring smoother airport workflows and improved service delivery in the face of growing air traffic demands.

Electronic Propulsion Engines: Revolutionizing Space Travel, Isaiah Echeverria

Undergraduate Honors Theses

Most spacecrafts rely on chemical propulsion to generate thrust and venture into the depths of outer space. They rely on principles from Newton’s three laws of motion, conservation of momentum-energy, and atomic physics. However, an electronic form of propulsion also exists providing spacecrafts an alternative opposed to the sole use of chemical energy. Electronic propulsion systems or engines last longer than current chemical spacecraft engines and are improving to produce greater amount of thrusts.

Comparing the two types of spacecraft engines shows the benefits and disadvantaged obtained by using either option as well as the main differences and similarities shared …

Functional Visualizations Of A Hydrogen-Electric Aircraft Propulsion System For Supporting Pilot Decision-Making, Misha M. S. Schweitzer, Ece Üreten, Clark Borst, Olaf Stroosma, Rene Van Paassen

International Symposium on Aviation Psychology - 2025

Cognitive Work Analysis (CWA) and Ecological Interface Design (EID) were used todesign a novel flight deck display for a regional turboprop aircraft that is being retrofitted with aHydrogen Aircraft Powertrain Storage System (HAPSS). This research addresses the challengesof managing cognitive complexity in next-generation aviation systems, focusing on designinginterfaces based on system constraints which are modeled through the Abstraction Hierarchy(AH). Visualizations were discussed in interviews with subject matter experts highlighting theneed for further matching the mental model of the pilot by addressing simplicity, workload, anduse case representations on the display. The iterative process included static and dynamic displaytesting and focused on …

Drone Medical Package Delivery For Improved Transportation And Better Patient Outcomes Final Implementation Report, Amro El-Adle, Madeline Alden, Yin-Hsuen Chen, Melissa Davidson

Information Technology & Decision Sciences Faculty Publications

The Drone Medical Package Delivery for Improved Transportation and Better Patient Outcomes planning and prototyping grant involves five partners, including Accomack-Northampton Planning District Commission (A-NPDC), Riverside Health System, Old Dominion University (ODU), Virginia Institute for Spaceflight & Autonomy (VISA), Virginia Innovation Partnership Corporation (VIPC), and DroneUp. The partners worked together to address access, safety, reliability and sustainability for medical and emergency response package delivery via drone, specifically, where the use of aerial drones could lead to better patient outcomes and improved safety and emergency response.

The goal of the project was to develop an operational prototype that woul evolve into …

High-Speed Aircraft Stability And Control Metrics, Timothy T. Takahashi, Jack A. Griffin, Ramana Grandhi

Faculty Publications

This review paper identifies key stability and control screening parameters needed to design low-risk, general-purpose high-speed aircraft. These derive from MIL-STD-8785C, MIL-STD-1797, and older AGARD reports, and are suitable for assessing conceptual high-speed vehicles. We demonstrate their applicability using published ground test, computation, and flight test data from the Bell X-2, North American X-15, Martin X-24A, Northrop HL-10, Lockheed Blackbird (YF-12/SR-71), and North American XB-70 as well as the Rockwell Space Shuttle Orbiter. The relative success of the X-15 and Blackbird and the performance limitations of the others indicate the need to scrutinize lateral-directional stability at the preliminary design phase. …

Extended-Duration Satellite Testing Via Altitude-Controlled High-Altitude Balloon, Drew Early, Evan Champney, Nikki Allen, Riley Galatis, Lukas Hezel, Joseph Kloess, Andrew Donnell, Sam Whitlock, Kaden Queener

Von Braun Symposium Student Posters

Undergraduate runner-up, 2025 Von Braun Symposium Student Poster Contest

Dynamic Stability Test Technique For Blunt Bodies In A Magnetic Suspension And Balance System, Caleb Hull, Colin Britcher, Dave E. Cox, Mark Schoenenberger, Hisham M. Shehata

Mechanical & Aerospace Engineering Faculty Publications

Techniques for the measurement of subsonic dynamic stability derivatives of blunt-body re-entry capsules are being developed using a Magnetic Suspension and Balance System at NASA Langley Research Center. The measured aerodynamics of a 45-degree sphere-cone similar to configurations being considered for Mars Sample Return Earth Entry Vehicle are reported. A novel test method has been developed where forced oscillatory translation of a test article is used to excite yaw attitude oscillations. The forced motion is then halted to observe free-to-oscillate behavior of the test article. Parameter identification methods are used to extract static and dynamic yawing moment stability characteristics from …

Mass-Adaptive Admittance Control For Robotic Manipulators, Hossein Gholampour, Jonathon E. Slightam, Logan E. Beaver

Mechanical & Aerospace Engineering Faculty Publications

Handling objects with unknown or changing masses is a common challenge in robotics, often leading to errors or instability if the control system cannot adapt in realtime. In this paper, we present a novel approach that enables a six-degrees-of-freedom robotic manipulator to reliably follow waypoints while automatically estimating and compensating for unknown payload weight. Our method integrates an admittance control framework with a mass estimator, allowing the robot to dynamically update an excitation force to compensate for the payload mass. This strategy mitigates end-effector sagging and preserves stability when handling objects of unknown weights. We experimentally validated our approach in …

Optimal Manipulation Motion Action Planner Enabled By Physics Informed Neural Networks, Jonathon E. Slightam, Logan E. Beaver

Mechanical & Aerospace Engineering Faculty Publications

Autonomous robotic manipulation in unstructured environments faces many challenges and is hindered by capabilities that bridge the gap between perception and acting on the world. Action plans that are centric to object motion rather than end-of-arm tooling behavior may aid this. This paper presents an autonomous action planner for a feedback linearizeable system comprised of three base motions that can be leveraged on their own or in combination to give custom motion plans. The optimization routine for the three different types of motion are presented, which are integrated into physics informed neural networks. A component of this is the autonomy …

Hydrogen Standards And Aviation Sustainability, Eva Maleviti, Evan Stamoulis, Elen Paraschi

Publications

Standards from ISO, SAE, and ASTM are essential for certification, safety, and sustainability validation.

Hydrogen Readiness In Aviation & Challenges- Technology Meets Regulation And Market Demand, Eva Maleviti

Publications

Where technology meets regulation and market demand.

Program And Proceedings: Nebraska Academy Of Sciences 1880–2025, 145th Anniversary Year, One Hundred-Thirty-Fifth Annual Meeting

Nebraska Academy of Sciences: Programs and Proceedings

Program

Aeronautics and Space Science

Biological and Medical Sciences

Biology

Chemistry

Earth Sciences

Science Education

Anthropology

Applied Science and Technology

Physics and Engineering

Forensic Sciences

Ecology, Sustainability, and Environmental Science

Maiben Lecture: Mary Ann Vinton, "State of the Academy"

Friends of Science Awards: David Crouse and Daniel Sitzman

Phase Change Cells And Verification Of Gallium As Thermal Calibration Reference In Space, Harri Latvakoski, T. Shane Topham, Gail Bingham, Mike Watson, Igor Podolski

Space Dynamics Laboratory Publications

• Phase change cell introduction

• Design and ground testing of on-orbit phase cells

• ISS phase cell flight experiment

Radiometric Sensor Level Calibration For Remote Sensing (Planning, Testing, And Operation), Joe Tansock

Space Dynamics Laboratory Publications

Contents

• What is Calibration and Why is it Important (example) 
• Remote Sensor Calibration Approaches
• Typical Space-based Sensor Lifecycle and Calibration Efforts at SDL
• EO Calibration Applications (example) 
• Example Calibrations at SDL
• Calibration Testing at SDL and example Calibration Equipment
• Calibration is Multi-Path
• Student Employment/Projects to Support SDL Calibration

Calibration For Small Satellite Payloads, Jason Knudsen, Christian Conkle, Alex Allgrunn, Deron Scott

Space Dynamics Laboratory Publications

SDL Presentation on Calibration for Small Satellite Payloads

Rbi Ground Calibration, Harri Latvakoski, Greg Cantwell, James Peterson, Joel Cardon

Space Dynamics Laboratory Publications

• RBI overview

• Ground calibration objectives

• Calibration configurations & chamber setup

• Calibration tests & equipment

Small Satellite Payload Calibration, Deron Scott, Cole Miller, Eli Salay, Shane Canfield, Scott Hansen, Matt Berghout, Jan Kunzler, Duane Miles

Space Dynamics Laboratory Publications

SmallSat missions have cost, time, and scale limitations. Calibration methods can be optimized to enable mission success at a low cost by providing customers the best “bang for their buck.”

Multi-Layered Security Approaches For A Modular Open Network Architecture-Based Satellite, Brandon Shirley, Quinn Young, Peter Wegner, Jacob Christensen, Jeffrey Janicik

Space Dynamics Laboratory Publications

Overview

• Introduction
• Open System Architecture (OSA) and Modular Open Network Architecture (MONA) background
• Security Challenges
• Security Principles
• Solutions

Side-By-Side Evaluation Of The Outgassing Rate And Ultimate Pressure Achieved Inside Tubes Made Of Low-Carbon And Stainless Steel, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

The hydrogen outgassing rate of a vacuum chamber made of AISI 1020 low-carbon steel was found to be notably smaller than a similar chamber made of AISI 316L stainless steel following heat treatment at 150 degrees C. When the chambers were baked at 400 degrees C, the outgassing rate of the 1020 low-carbon steel chamber was approximately 2000 times smaller than that of the 316L stainless-steel chamber. After quantifying hydrogen outgassing rates, vacuum chambers made of 1020 low-carbon steel and 316L stainless steel were heated for a prescribed duration and then pumped with an ion pump and nonevaporable getter pump …

Mitigating Out-Of-Plane Fiber Waviness In Afp Laminates With Tow-Gaps Via Selective Placement Of Thermoplastic Veils, Ahmadreza Ravangard, Kuthan Celebi, Sergii G. Kravchenko, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Fiber tow-gaps and overlaps formed during the Automated Fiber Placement (AFP) process pose a significant challenge by introducing non-uniform composite morphologies, often characterized by resin-rich regions and fiber waviness. These defects occur as deposited fibers sink into the gap regions during consolidation, with gap geometry determined during path planning. Such morphological inconsistencies can compromise structural reliability by initiating premature failure, particularly through localized out-of-plane waviness and resin accumulation. This study investigates the integration of high melting temperature thermoplastic veils, specifically polyetherimide (PEI), into fiber tow-gaps as a method to prevent ply sinking and reduce fiber waviness on both internal and …

Sex-Dependent Changes In Risk-Taking Predisposition Of Rats Following Space Radiation Exposure, Elliot Smits, Faith E. Reid, Ella N. Tamgue, Paola Alvarado Arriaga, Charles Nguyen, Richard A. Britten

Department Radiation Oncology & Biophysics Faculty Publications

The Artemis missions will establish a sustainable human presence on the Moon, serving as a crucial steppingstone for future Mars exploration. Astronauts on these ambitious missions will have to successfully complete complex tasks, which will frequently involve rapid and effective decision making under unfamiliar or high-pressure conditions. Exposure to low doses of space radiation (SR) can impair key executive functions critical to decision making. This study examined the effects of exposure to 10 cGy of Galactic Cosmic Ray simulated radiation (GCRsim) on decision-making performance in male and female rats with a naturally low predisposition for risk-taking (RTP) prior to exposure. …

A Two-Hit Model Of Executive Dysfunction: Simulated Galactic Cosmic Radiation Primes Latent Deficits Revealed By Sleep Fragmentation, Richard A. Britten, Ella N. Tamgue, Paola Arriaga Alvarado, Arriyam S. Fesshaye, Larry D. Sanford

Department Radiation Oncology & Biophysics Faculty Publications

Future Artemis-class missions to Mars will expose astronauts to prolonged space radiation (SR), sleep disruption, and operational demands requiring greater autonomy, placing decision making and executive function at heightened risk. Both SR and sleep fragmentation (SF) independently impair cognition, yet their combined effects remain poorly understood. Using the Associative Recognition Memory and Interference (ARMIT) task, we assessed cognitive performance in male rats exposed to 10 cGy of Galactic Cosmic Ray simulation (GCRsim), SF, or both. Under well-rested conditions, GCRsim-exposed rats exhibited overt deficits in the C.1.2 stage, performing at chance when reinforcement contingencies shifted, consistent with impaired cognitive flexibility. In …

Numerical Investigation Of Wind Disturbance Around A Multirotor Uav In Crosswind And Vertical Flight, Garrison Page

Theses and Dissertations--Mechanical and Aerospace Engineering

Uncrewed Aerial Vehicles (UAVs) are being increasingly utilized in a wide range of research applications, especially in meteorology. This is due to such factors as their ease of use, maneuverability compared to other forms of data collection, and for rotor- craft, the ability to hover. However, the rotorwash generated by UAVs can introduce significant disturbances, potentially affecting measurement accuracy from sensors. While several studies have investigated the rotorwash of individual UAVs utilizing Particle Image Velocimetry (PIV) and Computational Fluid Dynamics (CFD), there is limited exploration into how different rotor configurations and external wind conditions influence regions of turbulent flow around …