Aerospace Engineering Commons^™

Understanding The Structure Of Wing Tip Vortices Of Bio-Inspired Winglets, Greeshma C. Daniel

Doctoral Dissertations and Master's Theses

Bio-inspired wing tip devices were investigated with the goal of improving the fuel efficiency of subsonic aircraft. Particularly, the structure of a bio-inspired winglet design based on bird feathers were tested in a low-speed wind tunnel. Particle image velocimetry (PIV), was used to study the flow field at two planes aft of the wing as the wing tip vortices developed downstream. These were time-dependent, stereoscopic particle image velocimetry (sPIV) measurements carried out at two planes located at 0.7 and 2 chord distances downstream from the wing. The structure of the wingtip vortices was compared and contrasted with that formed over …

Optical Orbit Tracking And Estimation, Matthew Gillette

Doctoral Dissertations and Master's Theses

Angles-only initial orbit determination methods are currently limited in their use as they require some prior knowledge of where the observed object will be and when it will be there. This research aims to produce a viable method to automate this process so that objects whose trajectories are not saved in a user’s catalog can be observed. A method is devised using a novel approach to satellite recognition in an image. This method is used in addition to Astrometry to determine the right ascension and declination of the object. This information is then used to either obtain the initial conditions …

Actuation And Sensing Applications Of Piezoelectric Transducers, Connor Griffin

Theses and Dissertations

Piezoelectric materials, defined by their ability to display a charge across their surface in response to mechanical strain, are great for use in actuation and sensing applications. Actuation applications include acoustic devices, motors and vibration damping while sensing applications include pressure sensors, medical devices, energy harvesting and structural health monitoring (SHM). The use of piezoelectric actuation and sensing across the lifecycle of aerospace metals is currently an expanding field with use cases beginning with the manufacturing process and ending with SHM.

The research presented in this thesis had three goals: (i) to develop methods for implementation of piezoelectric actuation in …

Development Of Mirror Flexures For Use In The Muvi Instrument, Colin W. Harrop

Master's Theses

The Miniaturized Ultraviolet Imager (MUVI), is a compact wide field UV imaging instrument in development at UC Berkeley Space Sciences Laboratory and Cal Poly, San Luis Obispo. MUVI is designed to fit in a 2U CubeSat form factor and provide wide field, high resolution images of the ionosphere at far ultraviolet wavelengths. This thesis details the design and analyses of MUVI’s deployable cover mirror mounting flexures. Three different flexure geometries were evaluated, an optimal candidate was determined based on a number of criteria including isolation of vibration and stress to the mirrors, manufacturability and cost. The design of the flexure …

Prediction & Active Control Of Multi-Rotor Noise, Samuel O. Afari

Doctoral Dissertations and Master's Theses

Significant developments have been made in designing and implementation of Advanced Air Mobility Vehicles (AAMV). However, wider applications in urban areas require addressing several challenges, such as safety and quietness. These vehicles differ from conventional helicopter in that they operate at a relatively lower Reynolds number. More chiefly, they operate with multiples of rotors, which may pose some issues aerodynamically, as well as acoustically. The aim of this research is to first investigate the various noise sources in multi-rotor systems. High-fidelity simulations of two in-line counter-rotating propellers in hover, and in forward flight conditions are performed. Near field flow and …

Autonomous Space Surveillance For Arbitrary Domains, David Zuehlke

Doctoral Dissertations and Master's Theses

Space is becoming increasingly congested every day and the task of accurately tracking satellites is paramount for the continued safe operation of both manned and unmanned space missions. In addition to new spacecraft launches, satellite break-up events and collisions generate large amounts of orbital debris dramatically increasing the number of orbiting objects with each such event. In order to prevent collisions and protect both life and property in orbit, accurate knowledge of the position of orbiting objects is necessary. Space Domain Awareness (SDA) used interchangeably with Space Situational Awareness (SSA), are the names given to the daunting task of tracking …

Sharprazor: Automatic Removal Of Hair And Ruler Marks From Dermoscopy Images, Reda Kasmi, Jason Hagerty, Reagan Harris Young, Norsang Lama, Januka Nepal, Jessica Miinch, William V. Stoecker, R. Joe Stanley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Background: The removal of hair and ruler marks is critical in handcrafted image analysis of dermoscopic skin lesions. No other dermoscopic artifacts cause more problems in segmentation and structure detection. Purpose: The aim of the work is to detect both white and black hair, artifacts and finally inpaint correctly the image. Method: We introduce a new algorithm: SharpRazor, to detect hair and ruler marks and remove them from the image. Our multiple-filter approach detects hairs of varying widths within varying backgrounds, while avoiding detection of vessels and bubbles. The proposed algorithm utilizes grayscale plane modification, hair enhancement, segmentation using tri-directional …

The Photochemical Evolution Of Polycyclic Aromatic Hydrocarbons And Nontronite Clay On Early Earth And Mars, Nina Kopacz, Maria Angela Corazzi, Giovanni Poggiali, Ayla Von Essen, Vincent Kofman, Teresa Fornaro, Hugo Van Ingen, Eloi Camprubi, Helen E. King, John Brucato, Inge Loes Ten Kate

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Biology)

The photochemical evolution of polycyclic aromatic hydrocarbons (PAHs), an abundant form of meteoritic organic carbon, is of great interest to early Earth and Mars origin-of-life studies and current organic molecule detection efforts on Mars. Fe-rich clay environments were abundant on early Earth and Mars, and may have played a role in prebiotic chemistry, catalyzing the breakdown of PAHs and freeing up carbon for subsequent chemical complexification. Current Mars is abundant in clay-rich environments, which are most promising for harboring organic molecules and have comprised the main studied features by the Curiosity rover in search of them. In this work …

A Parametric Numerical Analysis Investigation To Optimize The Performance Of The Ranque-Hilsch Vortex Tube, Muneer Ahmad Sungur

Theses

A vortex tube is a device that separates compressed air into two streams: one with a higher temperature (hot stream) and the other with a lower temperature (cold stream). It is a popular cooling option because it is small, safe, and affordable. The main objective of this thesis is to examine the energy separation performance of RHVT by varying the internal tapering angles of convergent angles (2°, 1.75°, 1.5°, 1.25°, 1°, 0.75°, and 0.5°), straight angles (0°), and divergent angles (0.5°, 1°, 2°, 4°, and 6°), While the cold mass fraction is constant (0.317). Length-to-diameter ratio (Lt/Dt), inlet pressure, and …

Heat Transfer Analysis Of Microchannels Heat Sink With Sidewall Fins, Ahmad Ala Eddin Rahhal

Theses

This study aims to investigate Microchannel Heat Sinks with side wall fins through a model-based approach. The primary objective of the project is to design and analyze the thermal performance of straight Microchannel Heat Sinks with square and triangle-shaped fins on sidewalls. To examine their performance, a computational fluid dynamics (CFD) simulation study is conducted using the ANSYS Fluent software. The study starts by creating a CAD model of the heat sink and then analyzing its thermal properties with the ANSYS Fluent software. From the CFD simulation study, numerical results are obtained for different operational and geometrical conditions. The study …

Application Of Direct Simulation Monte Carlo Method To Computation Of Rf Signal Degradation During Hypersonic Flight, Andrew Derubertis

McKelvey School of Engineering Graduate Student Theses & Dissertations

In order to further understand the hypersonic blackout problem, the first step is to investigate models to quantify signal degradation and begin implementing these models to representative plasma sheath and flow data. This research is the first attempt at implementing a model to predict RF signal degradation through the plasma sheath surrounding the hypersonic air vehicle. The investigation is performed using a Direct Simulation Monte Carlo (DSMC) based flow solver. The dsmcFoam solver in the OpenFoam library is used to simulate the flow around hypersonic bodies to obtain flow field properties, most importantly the electron number density profile, to aid …

Accurate Indoor Navigation System Based On Imu/Lp-Mm Integrated Method Using Kalman Filter Algorithm, Abdullah Mohammed Bahasan

Hadhramout University Journal of Natural & Applied Sciences

Abstract

The demand for navigation systems is rapidly increasing, especially in indoor environments which the signal of GPS is not available. Therefore the Inertial Measurement Unit (IMU) system is a suitable navigation system in such indoor environments. It usually consists of three accelerometers and three gyroscopes to determine position, velocity and attitude information, respectively, without need of any external source. But this type of navigation systems has errors growth with time due to accelerometers and gyroscopes drifts. This paper introduces indoor navigation system based on integrated IMU navigation system with proposed system called Landmarks Points-Map Matching (LP-MM) system using Kalman …

Spacecraft Orbit Determination System, Daniel M. Dombrowski, Robert A. Bettinger

AFIT Patents

The present invention relates to a resident space object orbit determination system comprising a high efficiency module for determining a resident space object's orbit and a highly efficient method for determining same. Applicants developed a method and system to determine the orbits of residence space objects including resident space objects that do not reflect energy that is directed at them and/or may be coated to minimize the ability to accurately see such resident space objects. Thus, a method, a module and a system for making such determinations that can easily and inexpensively be added to an early warning reentry system …

Adaptive Modified Rise-Based Quadrotor Trajectory Tracking With Actuator Uncertainty Compensation, Emmanuel Ogbanje Ijoga, William Mackunis, Krishna Bhavithavya Kidambi, Madhur Tiwari

Publications

This paper presents an adaptive robust nonlinear control method, which achieves reliable trajectory tracking control for a quadrotor unmanned aerial vehicle in the presence of gyroscopic effects, rotor dynamics, and external disturbances. Through novel mathematical manipulation in the error system development, the quadrotor dynamics are expressed in a control-oriented form, which explicitly incorporates the uncertainty in the gyroscopic term and control actuation term. An adaptive robust nonlinear control law is then designed to stabilize both the position and attitude loops of the quadrotor system. A rigorous Lyapunov-based analysis is utilized to prove asymptotic trajectory tracking, where the region of convergence …

Microscale Modelling Of Lightning Damage In Fibre-Reinforced Composites, Scott L. J. Millen, Juhyeong Lee

Mechanical and Aerospace Engineering Faculty Publications

In this work, three-dimensional (3D) finite element simulations were undertaken to study the effects of lightning strikes on the microscale behaviour of continuous fibre-reinforced composite materials and to predict and understand complex lightning damage mechanisms. This approach is different from the conventional mesoscale or macroscale level of analysis, that predicts the overall lightning damage in composite laminates, thus providing better understanding of lightning-induced thermo-mechanical damage at a fundamental level. Micromechanical representative volume element (RVE) models of a UD composite laminate were created with circular carbon fibres randomly distributed in an epoxy matrix. The effects of various grounding conditions (one-, two-, …

Advanced Ensemble Modeling Method For Space Object State Prediction Accounting For Uncertainty In Atmospheric Density, Smriti Nandan Paul, Richard J. Licata, Piyush M. Mehta

Mechanical and Aerospace Engineering Faculty Research & Creative Works

For objects in the low Earth orbit region, uncertainty in atmospheric density estimation is an important source of orbit prediction error, which is critical for space traffic management activities such as the satellite conjunction analysis. This paper investigates the evolution of orbit error distribution in the presence of atmospheric density uncertainties, which are modeled using probabilistic machine learning techniques. The recently proposed "HASDM-ML," "CHAMP-ML," and "MSIS-UQ" machine learning models for density estimation (Licata and Mehta, 2022b; Licata et al., 2022b) are used in this work. The investigation is convoluted because of the spatial and temporal correlation of the atmospheric density …

Enabling Lunar Cubesat Missions With The Cubesat System Reference Model, Aaron Phillip Zucherman

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Engineering at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Aaron Phillip Zucherman on March 11, 2023.

Smart Wifi Thermostat-Enabled Thermal Comfort Control In Residences, Robert Lou, Kevin P. Hallinan, Kefan Huang, Timothy Reissman

Mechanical and Aerospace Engineering Faculty Publications

The present research leverages prior works to automatically estimate wall and ceiling R-values using a combination of a smart WiFi thermostat, building geometry, and historical energy consumption data to improve the calculation of the mean radiant temperature (MRT), which is integral to the determination of thermal comfort in buildings. To assess the potential of this approach for realizing energy savings in any residence, machine learning predictive models of indoor temperature and humidity, based upon a nonlinear autoregressive exogenous model (NARX), were developed. The developed models were used to calculate the temperature and humidity set-points needed to achieve minimum thermal comfort …

Comparisons Of Cooling Performance And Flow Characteristics Of A Combustor Liner Plate With Compound Angle And Simple Angle Effusion Holes, Hwabhin Kwon, Phillip M. Ligrani, Sneha R. Vanga, Heesung Park

PRC-Affiliated Research

The present investigation considers a unique compound angle arrangement, never previously considered, with α = 30°, β = ±30°, such that the compound angle of the effusion holes changes from β = +30° to β = −30°, as adjacent rows of effusion holes are encountered. Also provided are data for comparison from a simple angle configuration with α = 30°, β = 0°. Coolant is supplied to both effusion hole arrays using arrays of impingement cooling jets. The results of the numerical simulations are obtained using the ANSYS FLUENT V 21.1 numerical code, with a shear stress transport (SST) k–ω …

Spray Characterization Of An Unmanned Aerial Vehicle For Agricultural Spraying, Eray Önler, Hasan Berk Özyurt, Mehmet Şener, Sezen Arat, Bülent Eker, İlker Hüseyin Çelen

The Philippine Agricultural Scientist

Sustainability and higher efficiency in crop production are possible with the use of new technologies. The use of unmanned aerial vehicles (UAVs) brings many advantages, both in terms of monitoring agricultural areas and pesticide applications, and allows for early disease and damage detection as well as its application in areas without access to conventional sprayers. This study established parameters for spraying with clean water using a DJI Agras 14 MG-1P (RTK) UAV. Droplet distribution and droplet analyses were examined in the experiments carried out at different heights (1.5, 2.0, and 2.5 m) and flow rates (10, 15, 20, 25, and …

Towards An Understanding Of The Thermodynamic Properties Of Crtao4: A Computational Perspective, Tanner B. Gordon

Theses and Dissertations

Materials that can withstand higher temperatures are paramount for next-generation aircraft design. Hypersonic capabilities and jet-turbine engines operate in extreme environments. Choosing materials that have high thermal stability and oxidation resistance for these applications can increase engine efficiency, reduce size, weight and power (SWaP), and increase the maneuverability of the aircraft. The mixed oxide CrTaO₄ has been experimentally observed to significantly contribute to oxidation resistance at high temperatures. However, and despite its significance, its properties remain largely unknown. This work explores the thermal properties of this material from a multi-scale approach, by obtaining an accurate description of the thermodynamics …

Finite Element Procedure To Simulate Sandwich Structure With An Auxetic Core Under Impact Loading Using Abaqus/Explicit, Valdo Pratama, Annisa Jusuf, Arief Yudhanto, Bambang Kismono Hadi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A sandwich structure with an auxetic core is promising in improving the performance of a sandwich structure by implying an auxetic core as its core to combine the advantages of the two structures, e.g., sandwich structure's superior ability in flexural and shear resistance, auxetic structure in localizing damage, and densification phenomena. This paper discusses a finite element modeling procedure to simulate a sandwich structure with a heterogeneous re-entrant auxetic core. The material of the face is a unidirectional carbon fiber reinforced polymer (UD CFRP) and the core is polylactic acid (PLA). The model is subjected to a low-velocity impact loading …

Decomposition Of The Skin-Friction Coefficient Of Compressible Boundary Layers, Dongdong Xu, Pierre Ricco, Lian Duan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We derive an integral formula for the skin-friction coefficient of compressible boundary layers by extending the formula of Elnahhas and Johnson ["On the enhancement of boundary layer skin friction by turbulence: An angular momentum approach, "J. Fluid Mech. 940, A36 (2022)] for incompressible boundary layers. The skin-friction coefficient is decomposed into the sum of the contributions of the laminar coefficient, the change of the dynamic viscosity with the temperature, the Favre-Reynolds stresses, and the mean flow. This decomposition is applied to numerical data for laminar and turbulent boundary layers, and the role of each term on the wall-shear stress is …

Design Of A Miniaturized Cubesat Tt&C Patch Antenna, Thomas A. Butterick

Theses and Dissertations

This effort explored the design of miniaturized rectangular microstrip patch antennas for application as a telemetry, tracking, and control (TT&C) on a CubeSat. The motivation for this research was the Grissom-P CubeSat mission planned by AFIT. The TT&C antenna selected for the mission exceeded the allotted size by over a factor of two. The studies performed included analyses of simply reducing aperture size, altering substrate permittivity, and layered approaches to antenna miniaturization. The primary approach to miniaturization was based on a virtually shorted patch antenna. Other approaches included an edge-shorted, slotted patch and the use of corner truncations for improved …

Magnetic Anomaly Mapping For Navigation, Luke T. Bergeron

Theses and Dissertations

Magnetic navigation (MagNav) has the potential to provide a global form of navigation that uses magnetic measurements of the Earth’s anomaly magnetic field and compares those measurements to a magnetic anomaly map in order to determine the user’s position. Widespread use of MagNav will require a database of fully-sampled, low-altitude magnetic anomaly maps. Existing magnetic anomaly map databases usually come from under- or poorly-sampled surveys. In this work, we provide an easy to follow MagNav anomaly map generation framework and set of survey collection metrics/requirements in an effort to help facilitate and standardize the creation of such a database. We …

Belief Space Planning For Alternative Navigation In Gnss-Denied Environments, Timothy I. Machin

Theses and Dissertations

Robust alternative navigation for autonomous agents becomes critical without reliable GNSS. Autonomous agents utilize measurement updates to constrain uncertainty. Belief space planning builds graph structures of beliefs within environments based on probable paths, agent and measurement models, and information of the environment. The Rapidly-exploring Random Alt-Nav Belief Graph (RRBANG) algorithm leverages stochastic filtering to implement a range of alt-nav measurement capabilities for robust navigation in GNSS-denied environments.

Robust Feature Matching For Visual-Based Aerial Navigation Using Registered Imagery, Luis Montenegro

Theses and Dissertations

This work leverages the SIFT detector along with known robust feature matching techniques for vision-aided sUAS navigation solutions. The proposed algorithm focuses on a sufficient number of features extracted, their quality and their distribution.

Atmospheric Polarization And Solar Position As Kalman Updates To A Navigation Solution, Thomas J. Wheeler

Theses and Dissertations

Simulation and physical testing of a sensor that measures relative position of the Sun and polarization of light in the atmosphere as a navigational aid in a Kalman filter.

Lunar Search And Rescue: The Next Step For Human Spaceflight Recovery, Benjamin J. Johnis

Theses and Dissertations

Humans return to the Moon in 2024 under the NASA Artemis mission. Commercial space explorations are rapidly expanding. The sudden increase of human spaceflight calls for increased emphasis on space rescue. These revelations drove an AFRL/AFIT capability gap assessment to provide specific proposals for a modern space rescue program guided by Transaction Cost Economics Theory. The mission analysis arms USSPACECOM and NASA to coordinate an interagency approach to Lunar Search and Rescue, positioning America to compete in the new space race. The strategic consequences of failing to act could fundamentally jeopardize American leadership in space.

Concept Of Operations Of Cislunar Mirror Satellites To Provide Augmented Lighting Of Dim Space-Based Objects, Alec E. Cook

Theses and Dissertations

The imaging and inspection of Resident Space Objects (RSOs) is an increasingly important mission as space-faring nations and commercial enterprises alike seek to develop means to repair and refuel spacecraft, as well as de-orbit RSOs to reduce orbital debris. Lighting conditions are not always advantageous for an imaging/inspection or repair/refuel spacecraft; therefore, the use of mirror spacecraft to reflect solar energy is proposed to illuminate dimly lit RSOs. The present research investigates the efficacy of space-based reflectors at examining spacecraft in the cislunar environment. Specific assessments include target spacecraft in geosynchronous Earth orbit and periodic orbits around selected Lagrange points, …