Aerospace Engineering Commons^™

Efficiency Of Gas Turbine Engines, Tahir A. Upshaw

The Kennesaw Journal of Undergraduate Research

The following research involves conducting a confirmation of test bench results, and parametric cycle analysis. The results from these two methods of data collection is meant to show relationship between both. Where the data of the price induction can be verified with the parametric cycle analysis of the individual components to calculate the thrust and efficiency. Once we compare both methods, it will allow us to move on to part two of the research which involves determining how to make gas turbine engines more efficient based on the collected data.

Toward Adjoint-Based Aeroacoustic Optimization For Propeller And Rotorcraft Applications, Ramiz Ö. Içke, Oktay Baysal, Andy Moy, Leonard V. Lopes, Beckett Zhou, Boris Diskin

Mechanical & Aerospace Engineering Faculty Publications

The goal of the present project is to build a multidisciplinary, rapid, robust, and accurate computational tool to optimize wing-mounted propeller designs. The full Farassat’s formulation F1A for aeroacoustic analysis is implemented in the open-source software SU2. This extension enables the prediction of far-field noise generated by moving sources. The formulation is verified, for a stationary and rotating sphere in a wind tunnel and for a tiltrotor in forward flight, by comparing the acoustic predictions of SU2 with the predictions computed by NASA’s aeroacoustics code ANOPP2. The algorithmic differentiation capability of SU2 provides discretely consistent, adjoint-based sensitivity analysis for this …

Parametric Study Of A Turbojet Engine With Auxiliary Bypass Combustion- The Turboaux Engine, Kaleab Fetahi, Sharanabasaweshwara A. Asundi, Arthur C. Taylor, Adem H. Ibrahim, Syed Firasat Ali

Mechanical & Aerospace Engineering Faculty Publications

A parametric study of a novel turbojet engine with an auxiliary combustion chamber, nicknamed the TurboAux engine is presented. The TurboAux engine is conceived as an extension of a turbojet engine with an auxiliary bypass annular combustion chamber around the core stream. The study presented in this article is motivated by the need to facilitate clean secondary burning of fuel at temperatures higher than conventionally realized from air exiting the low-pressure compressor. The parametric study is initiated by performing a simple optimization analysis to identify optimal ‘fan’ pressure ratios for a series of conventional low-bypass turbofan engines with varying bypass …

Glue-Infused Rotating Nanofibers Net (Gronnet) For Capturing Space Debris- A Novel Debris Capturing System, Sneha M. Raibagi, Prithvi S.J. Monteiro, Rashmi K. Pallam, Amogh Anantha Murthy, Amit G. Gadag, Sharanabasaweshwara Asundi, Oleksandr Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

It is evident that space debris is a growing concern, particularly in the low altitude Earth orbits, and if not addressed in time, may have a drastic socio-economic impact on civilization. This paper describes the Glue-infused Rotating Nanofibers Net (GRoNNet), a novel debris capturing system for pico/nano/micro-satellites (PNMSats). GRoNNet is designed as a modular, cost-effective system with the capability to capture target debris in multiple attempts and expedite its re-entry by attaching a debris mitigation system. It may be best described by comparing it with a chameleon’s tongue but several hundreds/thousands of them infused with a thick honey-like viscous adhesive …

Assessment And Applications Of The Conversion Of Chemical Energy To Mechanical Energy Using Model Rocket Engines, Hüseyin Sarper, Nebojsa I. Jaksic, Ben J. Stuart, Karina Arcaute

Mechanical & Aerospace Engineering Faculty Publications

To provide the first-year engineering students with a hands-on experience in an engineering application using both chemistry and physics, this team project uses a set of chemical and physical energy concepts and MS Excel based analysis. The main objective of the project is to calculate how much of the potential maximum possible chemical energy is converted into propulsion when using model rocket engines with solid fuel. The secondary objective is to determine the effects of increasing conversion rates on the performance of a model rocket. The solid fuel or propellant used in common model rocket engines is black powder. Compared …

Ensuring Positive Definiteness In Linear Viscoelastic Material Functions Based On Prony Series, Christopher D. Rehberg

Honors Undergraduate Theses

This thesis presents a method to correct for non-positive-definiteness in linear viscoelastic material functions. Viscoelastic material functions for anisotropic materials need to be interconverted in a matrix coefficient prony series form, with a requirement of positive definiteness. Fitting is usually done as a uniaxial prony series, resulting in scalar coefficients. When these uniaxial coefficients are placed in a coefficient matrix, the required positive definiteness cannot be guaranteed. For those matrices that do not meet this requirement, finding the nearest symmetric semi-positive definite form of the matrix results in a viable prony series matrix coefficient with the required positive definiteness. These …

Degradation From Cmas Infiltration In 7ysz Eb-Pvd Thermal Barrier Coatings, Zachary Stein

Honors Undergraduate Theses

The lifetime of the high temperature ceramic coating 7 wt.% yttria-stabilized zirconia (7YSZ) is reduced when calcium-magnesium-alumino-silicate (CMAS) particulates enters aero-engines during operation in a sandy or dusty environment, melts, and infiltrates into the coating. 7YSZ undergo both chemical and mechanical degradation from CMAS infiltration during cycling. Characterization methods with synchrotron X-ray diffraction (XRD) provides a non-destructive means to measure the impact of time and temperature on coating degradation with high spatial resolution of 7YSZ coatings infiltrated and annealed by CMAS for 1 hour and 10 hours as well as at 1225 °C and 1250 °C. Additionally, qualitative results of …

Development Of A Computationally Inexpensive Method Of Simulating Primary Droplet Breakup, Brendon A. Cavainolo

Honors Undergraduate Theses

Liquid droplet impingement on aircraft can be problematic as it leads to ice accretion. There have been many incidents of aircraft disasters involving ice accretion, such as American Eagle Flight 4184. Understanding liquid droplet impingement is critical in designing aircraft that can mitigate the damages caused by icing. However, the FAA's regulations are only specified for "Appendix C" droplets; thus, aircraft designs may not be safe when accounting for droplets such as Supercooled Large Droplets. The assumptions of many models, such as the Taylor-Analogy Breakup (TAB) model, are no longer accurate for Supercooled Large Droplets, and the physics of those …

Evaluation Of Convective Heat Transfer Numerical Methods On Rough Surfaces From Additive Manufacturing, Jose Urcia

Electronic Theses and Dissertations, 2020-2023

The high versatility of additive manufacturing has led to an increase in use in a number of different fields. Surface roughness then comes as a natural consequence of additive manufacturing which interferes with a smooth wall assumption such as those found in gas turbine blades. The Discrete Element Roughness Method (DERM) has been used to improve convective heat transfer predictions on surface roughness. This work aims to validate the core momentum and heat transfer correlation of DERM through an evaluation of Computational fluid dynamics (CFD)-based solution of the flow around individual roughness elements with the goal of improving the correlations. …

Atv Dynamics And Pediatric Rider Safety, James T. Auxier Ii

Theses and Dissertations--Biomedical Engineering

It has been observed through numerous academic and governmental agency studies that pediatric all-terrain vehicle ridership carries significant risk of injury and death. While no doubt valuable to safety, the post-hoc approach employed in these studies does little to explain the why and how behind the risk factors. Furthermore, there has been no prolonged, widespread, organized, and concerted effort to reconstruct and catalog the details and causes of the large (20,000+) number of ATV-related injuries that occur each year as has been done for road-based motor vehicle accidents. This dissertation takes the opposite approach from a meta-analysis and instead examines …

Influence Of Size Effects On Surface Generation During Finish Machining And Surface Integrity In Ti-6al-4v, Ian S. Brown

Theses and Dissertations--Mechanical and Aerospace Engineering

Finish machining is an essential manufacturing process that is used to enhance the mechanical characteristics of critical components. The deformation that occurs at the tool and workpiece interface in finish machining significantly affects a host of component properties, commonly referred to as “surface integrity” properties. Surface roughness is a machining deformation-affected characteristic that is of high relevance in contemporary manufacturing. However, over recent decades it has been made clear that the material properties of the deformed surface layers are relevant to component performance as well. Predicting the overall surface quality of a machined component is of great relevance to the …

Flame Stabilization Of A Premixed Jet In Vitiated Coflow, Tyler Owens

Theses and Dissertations--Mechanical and Aerospace Engineering

Premixed staged combustion in gas turbine engines can reduce emissions by lowering peak flame temperatures but can also lead to different stability characteristics when compared to traditional combustors. High pressure ratio and subsequently high temperatures can lead to conditions suitable for both autoignition and premixed flame propagation in an environment where spatial fuel/air variations are present.

An experimental facility which issues a premixed jet into a coflowing vitiated mixture was studied to examine the stability behavior, resulting in a lifted flame. The effective ignition delay observed flame was much greater than homogeneous ignition delay calculations for the same conditions. It …

Development Of Universal Solver For High Enthalpy Flows Through Ablative Materials, Umran Duzel

Theses and Dissertations--Mechanical and Aerospace Engineering

Atmospheric entry occurs at very high speeds which produces high temperature around the vehicle. Entry vehicles are thus equipped with Thermal Protection Systems which are usually made of ablative materials. This dissertation presents a new solver that models the atmospheric entry environment and the thermal protection systems. In this approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical problems, set of benchmarks and also a …

Carbon Oxidation At The Atomic Level: A Computational Study On Oxidative Graphene Etching And Pitting Of Graphitic Carbon Surfaces, Simon Schmitt

Theses and Dissertations--Mechanical and Aerospace Engineering

In order to understand the oxidation of solid carbon materials by oxygen-containing gases, carbon oxidation has to be studied on the atomic level where the surface reactions occur. Graphene and graphite are etched by oxygen to form characteristic pits that are scattered across the material surface, and pitting in turn leads to microstructural changes that determine the macroscopic oxidation behavior. While this is a well-documented phenomenon, it is heretofore poorly understood due to the notorious difficulty of experiments and a lack of comprehensive computational studies. The main objective of the present work is the development of a computational framework from …

Peak Pressures On Low Rise Buildings: Cfd With Les Versus Full Scale And Wind Tunnel Measurements, Aly Mousaad Aly, Hamzeh Gol-Zaroudi

Faculty Publications

This paper focuses on the processes of wind flow in the atmospheric boundary layer, to produce realistic full-scale pressures for the design of low-rise buildings. CFD with LES turbulence closure is implemented on a scale 1:1 prototype building. A proximity study was executed computationally in CFD with LES that suggests new recommendations on the computational domain size, in front of a building model, apart from common RANS-based guidelines (e.g. COST and AIJ). Our findings suggest a location of the test building, different from existing guidelines, and the inflow boundary proximity influences pressure correlation and reproduction of peak loads. The CFD …

Towards A Hybrid Comfortable Passenger Cabin Interior For The Flying V Aircraft, Peter Vink, Thomas Rotte, Shabila Anjani, Chiara Percuoco, Roelof Vos

International Journal of Aviation, Aeronautics, and Aerospace

The Flying-V is a V-shaped airplane in development, which uses less fuel due its form. Passengers are in the oval cabin in the wing, which asks for an alternative design to the interior. At the same time there is a demand for more comfortable interiors.

80 students were asked to develop interior design ideas for this Flying V concept. A jury of experts selected four aircraft interior concepts and these were developed and a 1:1 scale mockup was made, with a hybrid interior. It included a chaise longue seats, the group space, beds and ‘staggered’ seats for the middle of …

A Review Of Dji’S Mavic Pro Precision Landing Accuracy, Cody Yoakum, Joseph Cerreta

International Journal of Aviation, Aeronautics, and Aerospace

Precision landing has the potential to increase the accuracy of autonomous landings. Unique applications require specific landing performance; for example, wireless charging loses efficiency with a misalignment of 100mm. Unfortunately, there is no publicly available information for the DJI Mavic Pro’s landing specifications. This research investigated the ability of a Mavic Pro to land at a specified point accurately. The purpose of this research is to determine if precision landings are more accurate than non-precision autonomous landings and if the Mavic Pro is capable of applications such as wireless charging when using precision landings. A total of 128 (64 precision …

Mini Unmanned Aerial Systems (Uav) - A Review Of The Parameters For Classification Of A Mini Uav., Ramesh Ps, Muruga Lal Jeyan

International Journal of Aviation, Aeronautics, and Aerospace

In the recent years, Mini Unmanned Aerial Vehicle (UAV) has generated a lot of interest both in military and civilian applications. Contemporary innovations have seen the entry of Mini UAV into a wide range of hitherto fore unexplored domains. Advancement in computer systems, miniaturisation of electronics, artificial intelligence and composite materials is propelling the development of Mini UAV. Mini UAV is a class of UAV within the large family of unmanned systems categorised by a set of parameters. However, there are glaring inconsistencies and lack of uniformity in specifying the parameters which define a Mini UAV. The paper explores the …

Rapid Orbital Motion Emulator (Rome): Kinematics Modeling And Control, Ahmed Elsadek Ahmed Seleit

Electronic Theses and Dissertations, 2020-2023

Space missions design requires already tested and trusted control algorithms for spacecraft motion. Rapidly testing control algorithms at a low cost is essential. A novel robotic system that emulates orbital motion in a laboratory environment is presented. The system is composed of a six degree of freedom robotic manipulator fixed on top of an omnidirectional ground vehicle accompanied with onboard computer and sensors. The integrated mobile manipulator is used as a testbed to emulate and realize orbital motion and control algorithms. The kinematic relations of the ground vehicle, robotic manipulator and the coupled kinematics are derived. The system is used …

Multiscale Modeling Of Carbon Fibers/Graphene Nanoplatelets/Epoxy Hybrid Composites For Aerospace Applications, Hashim Al Mahmud

Dissertations, Master's Theses and Master's Reports

Significant research effort has been dedicated for decades to improve the mechanical properties of aerospace polymer-based composite materials. Lightweight epoxy-based composite materials have increasingly replaced the comparatively heavy and expensive metal alloys used in aeronautical and aerospace structural components. In particular, carbon fibers (CF)/graphene nanoplatelets (GNP)/epoxy hybrid composites can be used for this purpose owing to their high specific stiffness and strength. Therefore, this work has been completed to design, predict, and optimize the effective mechanical properties of CF/GNP/epoxy composite materials at different length scales using a multiscale modeling approach. The work-flow of modeling involves a first step of using …

Synthesis Of Graphene Using Plasma Etching And Atmospheric Pressure Annealing: Process And Sensor Development, Andrew Robert Graves

Graduate Theses, Dissertations, and Problem Reports (ETD)

Having been theorized in 1947, it was not until 2004 that graphene was first isolated. In the years since its isolation, graphene has been the subject of intense, world-wide study due to its incredibly diverse array of useful properties. Even though many billions of dollars have been spent on its development, graphene has yet to break out of the laboratory and penetrate mainstream industrial applications markets. This is because graphene faces a ‘grand challenge.’ Simply put, there is currently no method of manufacturing high-quality graphene on the industrial scale. This grand challenge looms particularly large for electronic applications where the …

Large-Scale Inflatable Structures For Tunnel Protection: A Review Of The Resilient Tunnel Plug Project, Eduardo M. Sosa, Gregory J. Thompson, Gregory M. Holter, John M. Fortune

Faculty & Staff Scholarship

The protection of underground civil infrastructure continues to be a high priority for transportation and transit security agencies. In particular, rail transit tunnels running under bodies of water are susceptible to disruptions due to flooding caused by extraordinary climatic events such as hurricanes or other events resulting from human activities. Several events have taken place in the past decades that have demonstrated the need to mitigate vulnerabilities or, at least, minimize the consequences of catastrophic events. Although it is impossible to prevent all situations that can lead to flooding, damage can be substantially decreased by reducing the area affected by …

Redesign And Analysis For Landing Gear Components, Daniel Clarke

Williams Honors College, Honors Research Projects

A project for Collins Aerospace, the company I co-op at, where I will redesign several components of a landing gear for a military program. Any structural/stress analysis will also be performed. The goal is to reduce weight while maintaining strength and structural integrity.

Research And Design Of A Two-Stage Supersonic Rocket, Ryan Hannaford, James Gase, Matthew Reppa, Harrison Lewis

Williams Honors College, Honors Research Projects

This report documents the entire design process for a two-stage vertical launch vehicle and highlights the team’s research, design work, testing, and construction of the launch vehicle. Every major system of the launch vehicle, including motors, electronics systems, interior and exterior structures, and recovery, will be individually analyzed and assessed during the design process. The launch vehicle will compete at the 2020 Spaceport America Cup in Las Cruces, New Mexico. Undergoing this project will allow the team members to further develop the skills learned throughout the Mechanical Engineering curriculum and Aerospace Systems Engineering curriculum at the University of Akron. Additionally, …

Rocket Motor Nozzle, Corey Hillegass

Williams Honors College, Honors Research Projects

For this honors research and senior design project, the authors will research, analyze, and manufacture a rocket motor nozzle for the Akronauts rocket design team. This research and design project will improve how the rocket design team will decide and manufacture nozzles going forward. The impact of this improvement allows the rocket design team to take steps toward being self-sustaining by manufacturing student designed parts as opposed to commercially bought parts. This will not only be successful in increasing student impact on future designs, but also provides a technical challenge for the authors and will present as an impressive feat …

Effect Of Turbulence Model Closure Coefficient Uncertainty On Scramjet Flow Field Analysis, Martin Albert Di Stefano

Doctoral Dissertations

“The numerical modeling of supersonic combustion ramjet (scramjet) engine flow paths plays an important role in the design of hypersonic air-breathing propulsion systems. Due to the complexity of the flow field physics and limited experimental data, numerical models possess uncertainties which should be addressed to improve the prediction accuracy of the simulations. In this study, the effect of turbulence model closure coefficient uncertainty on the Reynolds-averaged Navier-Stokes solution of a scramjet isolator and scramjet strut fuel injector flow field is investigated with an uncertainty quantification and sensitivity analysis study for commonly used turbulence models. Turbulence models considered in this work …

Assessing Cognitive Processing And Human Factors Challenges In Nextgen Air Traffic Control Tower Team Operations, Mark D. Miller, Sam Holley, Bettina Mrusek, Linda Weiland

Publications

Previous research of Terminal Radar Control Facilities and Standard Terminal Automation Replacement Systems interactions by the authors examined how combined NextGen digitized technology affects air traffic controller functions. Applying their updated SHELL model, human factors implications on the Tower Team before and after implementing NextGen technology were examined, focusing on cognitive loading and automated functions affecting each team member. A survey examined where cognitive difficulties occur when controllers are responsible for multiple screen views, remote airfields or helipads, and digitized cameras and blind spots. Scanning challenges were identified where local traffic, ground operations, and data converge onto one screen, and …

Physiological Effects During Aerobatic Flights On Science Astronaut Candidates, Pedro Llanos, Diego M. Garcia

Publications

Spaceflight is considered the last frontier in terms of science, technology, and engineering. But it is also the next frontier in terms of human physiology and performance. After more than 200,000 years humans have evolved under earth’s gravity and atmospheric conditions, spaceflight poses environmental stresses for which human physiology is not adapted. Hypoxia, accelerations, and radiation are among such stressors, our research involves suborbital flights aiming to develop effective countermeasures in order to assure sustainable human space presence. The physiologic baseline of spaceflight participants is subject to great variability driven by age, gender, fitness, and metabolic reserve. The objective of …

Physiological Effects On Scientist Astronaut Candidates: Hypobaric Training Assessment, Pedro Llanos, Diego Garcia

Publications

This paper is addressed to expanding our understanding of the effects of hypoxia training on our bodies to better model its dynamics and leverage some of its implications and effects on human health. Hypoxia training is a recommended practice for military and civilian pilots that allow them to recognize their early hypoxia signs and symptoms, and Scientist Astronaut Candidates (SACs) who underwent hypobaric hypoxia (HH) exposure as part of a training activity for prospective suborbital flight applications. This observational-analytical study describes physiologic responses and symptoms experienced by a SAC group before, during and after HH exposure and proposes a model …

Impact Of Turbulence Models And Shape Parameterization On Robust Aerodynamic Shape Optimization, Aslihan Vuruskan

Doctoral Dissertations

"Aerodynamic design optimization is typically performed at fixed flight conditions, without considering the variation and uncertainty in operating conditions. The objective of robust aerodynamic optimization is to design an aerodynamic configuration, which will keep its optimum performance under varying conditions such as the speed of aircraft. The primary goal of this study was to investigate the impact of turbulence models used in RANS simulations on the 2-D airfoil and 3-D wing designs obtained with gradient-based deterministic and robust optimization in transonic, viscous, turbulent flows. The main contribution of this research to the aerodynamic design area was to quantify the impact …