Aerospace Engineering Commons^™

Space And Defense – Volume One – Number One – Fall 2006, Space And Defense Journal

Space and Defense

No abstract provided.

Avia 201 Project 1 Windtunnel Lab Form Ver 1.20 20200323, Nihad E. Daidzic

Aviation Department Publications

To introduce aviation/aeronautics/aerospace students to wind tunnel(s) and methods used in experimental identification of various aerodynamic (and stability) coefficients of airfoils (2D), wings (3D) and scale models.

Proper Orthogonal Decomposition And Recurrence Map For The Identification Of Spatial–Temporal Patterns In A Low-Re Wake Downstream Of Two Cylinders, Meihua Zhang, Zhongquan Charlie Zheng, Huixuan Wu

Mechanical and Aerospace Engineering Faculty Publications

Flow decomposition methods provide systematic ways to extract the flow modes, which can be regarded as the spatial distribution of a coherent structure. They have been successfully used in the study of wake, boundary layer, and mixing. However, real flow structures also possess complex temporal patterns that can hardly be captured using the spatial modes obtained in the decomposition. In order to analyze the temporal variation of coherent structures in a complex flow field, this paper studies the recurrence in phase space to identify the pattern and classify the evolution of the flow modes. The recurrence pattern depends on the …

Development And Testing Of Novel Antimicrobial Materials For Additive Manufacturing With Application In Space, Michael Thompson, Jorge Zuniga, Christopher Copeland, Roberto Saavedra, Claudia Cortes Reyes, Andres Acuña Velásquez, Daniel Martínez Pereira, Claudio Soto

UNO Student Research and Creative Activity Fair

PURPOSE: The purpose of the study was twofold: (i) develop and test the antimicrobial properties of a polylactic acid- and a polyurethane-based filament, and (ii) use these filaments to manufacture a socket-based prosthesis to verify printability and longevity of the antimicrobial properties. It was hypothesized that the formulation of a novel biocidal copper-based nanocomposite with a biocompatible 3D printing polymer/copolymer can be used for the development of antimicrobial medical devices to mitigate microbial risks during long space flight missions [1, 2, 3].

METHODS: Polylactic Acid-based Filament Development-The development of a polylactic acid-based filament involved several processes, such as fermentation …

2020 Oklahoma Research Day Full Program, Southwestern Oklahoma State University

Oklahoma Research Day Abstracts

No abstract provided.

Magslam: Aerial Simultaneous Localization And Mapping Using Earth's Magnetic Anomaly Field, Taylor N. Lee, Aaron J. Canciani

Faculty Publications

Instances of spoofing and jamming of global navigation satellite systems (GNSSs) have emphasized the need for alternative navigation methods. Aerial navigation by magnetic map matching has been demonstrated as a viable GNSS‐alternative navigation technique. Flight test demonstrations have achieved accuracies of tens of meters over hour‐long flights, but these flights required accurate magnetic maps which are not always available. Magnetic map availability and resolution vary widely around the globe. Removing the dependency on prior survey maps extends the benefits of aerial magnetic navigation methods to small unmanned aerial systems (sUAS) at lower altitudes where magnetic maps are especially undersampled or …

Student Learning And Retention Using A Flight Training Device: A Case Study, Adeel Khalid

National Training Aircraft Symposium (NTAS)

Student learning and retention as a function of the mode of teaching is analyzed in this study. Different groups of students receive information about aircraft flight operations either via lecture, through directed study, a combination of the two or through a pre-recorded flight demonstration video. Their level of learning is assessed by evaluating how well they fly an aircraft and perform a predefined mission using a flight simulator. Scores of different groups are compared qualitatively and quantitatively and students are surveyed after the flight. It is hypothesized that students that learn through watching a demonstration video and have the ability …

Nothing But A Number: A Closer Look At Stall Speed, Nihad E. Daidzic

Aviation Department Publications

CFIS REPEAT IT LIKE A MANTRA: An airplane can stall at any airspeed, in any pitch attitude. Your trainer’s wing always stalls when it exceeds its critical angle of attack—and that can happen even if the airplane is pointed straight down and approaching VNE. So what do the stall speeds published in the pilot’s operating handbook mean? These only apply for the stated conditions: often level flight, maximum gross weight, and most forward center of gravity, with flaps retracted (VS1) or in the landing configuration (VS0). Factors such as total weight, load factor, power, and center of gravity location affect …

New Constraint-Driven Mission Construct For Small Satellites And Constrained Missions, Lee Jasper, Barbara Braun, Lauren Hunt

Space Dynamics Laboratory Publications

Small satellites, though increasingly prevalent in the industry today, tend to not follow traditional development paths, technically or programmatically. In contrast to traditional requirements-driven missions, where meeting requirements is the primary metric of success, small satellite missions tend to be constraints-driven, where mission scope is tradable to maintain cost and schedule constraints.

Clean, Robust Alkali Sources By Intercalation Within Highly Oriented Pyrolytic Graphite, Rudolph N. Kohn Jr., Matthew S. Bigelow, Mary Spanjers, Benjamin K. Stuhl, Brian L. Kasch, Spencer E. Olson, Eric A. Imhof, David A. Hostutler, Matthew B. Squires

Space Dynamics Laboratory Publications

We report the fabrication, characterization, and use of rubidium vapor dispensers based on highly oriented pyrolytic graphite (HOPG) intercalated with metallic rubidium. Compared to commercial chromate salt dispensers, these intercalated HOPG (IHOPG) dispensers hold an order of magnitude more rubidium in a similar volume, require less than one-fourth the heating power, and emit less than one-half as many impurities. Appropriate processing permits exposure of the IHOPG to atmosphere for over ninety minutes without any adverse effects. Intercalation of cesium, potassium, and lithium into HOPG has also been demonstrated in the literature, which suggests that IHOPG dispensers may also be made …

Lip Thrust Apparatus, Ian M. Wilson, Alvin K. Cheong

Mechanical Engineering

This document contains the background information, defined scope of work, preliminary design philosophy, conceptual design development, and final design choices along with its corresponding manufacturing and design verification plans. It also includes the preliminary testing and prototyping necessary in bringing our verification prototype to its final configuration for delivery. Finally, it includes the entire manufacturing process followed in creating the final project and the extensive testing performed to ensure it meets the defined engineering specifications. The aerodynamic phenomenon being analyzed and demonstrated in our final deliverable can be seen in a scenario where when a propeller is enclosed in a …

John Houbolt: The Unsung Hero Of The Apollo Moon Landings, William F. Causey

Purdue University Press Book Previews

In May 1961, President Kennedy announced that the United States would attempt to land a man on the moon and return him safely to the earth before the end of that decade. Yet NASA did not have a specific plan for how to accomplish that goal. Over the next fourteen months, NASA vigorously debated several options. At first the consensus was to send one big rocket with several astronauts to the moon, land and explore, and then take off and return the astronauts to earth in the same vehicle. Another idea involved launching several smaller Saturn V rockets into the …

On Controlling Interfacial Heterogeneity To Trigger Bridging In Secondary Bonded Composite Joints: An Efficient Strategy To Introduce Crack-Arrest Features, Ran Tao, Xiaole Li, Arief Yudhanto, Marco Alfano, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Secondary adhesive bonding of carbon fiber-reinforced polymer laminates is of great interest for the aerospace and automotive industries. However, joint reliability is still a major concern because of fabrication-induced or service-related cracks that are difficult to monitor and can lead to catastrophic failure. In this work, we propose a patterning strategy where the careful design of spatially varying interface properties enables the formation of an adhesive ligament that acts as a crack-arrest feature. Bi-dimensional finite element models of adhesively bonded double cantilever beams were employed to investigate the role of the main parameters of the pattern (i.e., geometrical parameters and …

A System Architecture For Phased Development Of Remote Suas Operation, Eric Ashley

Master's Theses

Current airspace regulations require the remote pilot-in-command of an unmanned aircraft systems (UAS) to maintain visual line of sight with the vehicle for situational awareness. The future of UAS will not have these constraints as technology improves and regulations are changed. An operational model for the future of UAS is proposed where a remote operator will monitor remote vehicles with the capability to intervene if needed. One challenge facing this future operational concept is the ability for a flight data system to effectively communicate flight status to the remote operator. A system architecture has been developed to facilitate the implementation …

Structural Dynamic And Inherent Damping Characterization Of Additively Manufactured Airfoil Components, Andrew W. Goldin

Theses and Dissertations

The push for low cost and higher performance/efficient turbine engines have introduced a new demand for novel technologies to improve robustness to vibrations resulting in High Cycle Fatigue (HCF). There have been many proposed solutions to this, some passive and some active. With the advent of Additive Manufacturing (AM), new damping techniques can now be incorporated directly into the design and manufacture process to suppress the vibrations that create HCF. In this study, this novel unfused pocket damping technology is applied to a blade structure and the resulting damping effectiveness is quantified. The application of this technology to complex geometries …

Improved Ground-Based Monocular Visual Odometry Estimation Using Inertially-Aided Convolutional Neural Networks, Josiah D. Watson

Theses and Dissertations

While Convolutional Neural Networks (CNNs) can estimate frame-to-frame (F2F) motion even with monocular images, additional inputs can improve Visual Odometry (VO) predictions. In this thesis, a FlowNetS-based [1] CNN architecture estimates VO using sequential images from the KITTI Odometry dataset [2]. For each of three output types (full six degrees of freedom (6-DoF), Cartesian translation, and transitional scale), a baseline network with only image pair input is compared with a nearly identical architecture that is also given an additional rotation estimate such as from an Inertial Navigation System (INS). The inertially-aided networks show an order of magnitude improvement over the …

Microturbine Turbojets: Experimental Evaluation Of Commercially Available Engines, Richard A. Depaola Iii

Theses and Dissertations

This research assessed the performance of commercial microturbine turbojets and was the first industry-wide investigation into this class of engine by AFRL's SERL. Four commercial engines of the same thrust class were evaluated for overall and component-level performance. In addition to providing an evaluation of existing systems, the maximum performance for a commercial turbojet was predicted based on component evaluations. This analysis indicated that a commercial turbojet could have comparable thrust performance to a similarly sized military-grade engine, but it is unlikely that commercial engines can achieve the SFC of military engines without upgrading the compressors found in commercial microturbines.

Laser Shock Peening Pressure Impulse Determination Via Empirical Data-Matching With Optimization Software, Colin C. Engebretsen

Theses and Dissertations

Laser shock peening (LSP) is a form of work hardening by means of laser induced pressure impulse. LSP imparts compressive residual stresses which can improve fatigue life of metallic alloys for structural use. The finite element modeling (FEM) of LSP is typically done by applying an assumed pressure impulse, as useful experimental measurement of this pressure impulse has not been adequately accomplished. This shortfall in the field is a current limitation to the accuracy of FE modeling, and was addressed in the current work. A novel method was tested to determine the pressure impulse shape in time and space by …

Design, Development, And Testing Of A Low Cost, Additively-Manufactured, Centrifugal Compressor, Aaron P. Bauer

Theses and Dissertations

The three objectives of this research were to: 1.) design, build, and test AM compressors to substitute into COTS micro-gas turbine engines, 2.) provide initial correlations between FEA and compressor failure speed, and 3.) characterize the effects of AM on compressor performance. These goals improved the design cycle cost and the design-validation time cycle. ULTEM 9085, 300-AMB, and Onyx-Kevlar temperature-dependent tensile properties were measured. FEA-predicted failure speeds of stock compressor designs led design improvements, potentially fulfilling the original compressor requirements. Physical testing of the stock and ULTEM 9085 compressors occurred. Comparing these compressors' performances demonstrated that low cost, AM materials …

Solution Anneal Heat Treatments To Enhance Mechanical Performance Of Additively Manufactured Inconel 718, David J. Newell

Theses and Dissertations

The nickel-based superalloy Inconel 718 (IN718) is an excellent candidate among aerospace alloys for laser powder-bed fusion (LPBF) manufacturing. As-built LPBF IN718 has a vertically aligned columnar (001) microstructure which translates into orthotropic mechanical behavior. The post-process heat treatments for IN718 were developed 60 years ago for wrought and cast processes and do not mitigate the columnar microstructure of the LPBF process. Recrystallization is required to remove the columnar microstructure, which would allow for parts to be fabricated on different machines or in different orientations but still achieve the same properties. This research investigated the microstructure of LPBF IN718 as …

Development Of A Small Scale Rotating Detonation Engine, Joseph R. Dechert

Theses and Dissertations

The Rotating Detonation Engine (RDE) has been researched extensively in recent years, but the minimum size limits of an RDE have not been well investigated. The goal of this research was to build an RDE small enough to produce a detonation frequency above 20 kHz with a single detonation wave while also reducing the engine's mass ow rate. An engine with these design characteristics would reduce hazards associated with previous RDE testing. This research objective resulted in the design of an RDE with an outer diameter sized at 28 mm using ethylene and nitrous oxide as a fuel and oxidizer. …

The Effect Of Passive And Active Boundary-Layer Fences On Delta Wing Performance At Low Reynolds Number, Anna C. Demoret

Theses and Dissertations

The effect of passive and active boundary-layer fences (BLFs) on performance is evaluated on a NACA 0012 delta wing (c_root = 14in, c_tip = 2.8in, Λ = 45°, b = 23.5in) at a Reynolds number (Re) of 5.0 x 10⁵ based on the root chord. The performance improvements of a passive BLF are replicated and improved upon using an active flow control (AFC) fluidic fence created by a wall-normal steady-blowing jet from a slot. The application of a passive BLF at a spanwise location of 70% z/b resulted in an 8.7% increase in C_Lmax compared to …

Design And Analysis Of A Compact Combustor For Integration With A Jetcat P90 Rxi, Daniel Holobeny

Theses and Dissertations

Ultra Compact Combustors are a novel approach to modern gas turbine combustor designs that look to reduce the overall combustor length and weight. A previous study integrated an Ultra Compact Combustor into a JetCat P90 RXi turbine engine and achieved self-sustained operation with a length savings of 33% relative to the stock combustor. However, that combustor could not operate across the full stock engine performance range due to flameout at increased mass ow rates as reactions were pushed out of the primary zone. To ensure reactions stayed in the primary zone, a new design with a larger combustor volume was …

Detonation Confinement In A Radial Rotating Detonation Engine, Kavi Muraleetharan

Theses and Dissertations

Radial Rotating Detonation Engines (RRDE) have provided an opportunity for use of a pressure-gain combustor in a more compact form compared to an axial RDE. A successfully tested RRDE has operated over a wide range of test conditions and produced detonation modes with one, two, and three waves. The presence of multiple waves located the detonation waves to the outer radius, while one wave modes operated closer to the inner radius. Locating the detonation wave closer to the inner diameter resulted in less time for combustion prior to the radial turbine. Subsequently, this tended to decrease efficiency. To attempt to …

Modeling Hybrid Composites Using Tsai-Wu And Hashin Failure Criterion, Candice R. Roberts

Theses and Dissertations

Hybrid composites require further study and testing for future use in various fields. This study focuses on simulating a Hybrid Composite using IM7-977-3 laminae with steel foils in Abaqus under bolt loading by using Hashin and Tsai-Wu failure criterion. Initial simulations contain only the IM7-977-3 composite with cohesive layers. Foil samples were then tested for accurate material properties from which the simulations were then updated to include steel foils. The two models show that Tsai-Wu failure criterion, while great for anisotropic material in tension, does not prove accuracy around the hole of the composite material which is in compression. Hashin …

Space-Based Localization Of Radio Frequency Transmitters Utilizing Macaulay Resultant And Heuristic Optimization Methods, Jessica M. Wightman

Theses and Dissertations

This research focuses on radio frequency geolocation of space objects utilizing space-based platforms. Geolocation has long been the solution for locating objects. In particular, this study examines the scenario of two cooperative receivers geolocating a transmitter in close proximity. An algorithm is developed to calculate the initial estimated transmitter location and projected orbital trajectory. The algorithm uses the Macaulay method of solving a system of polynomials as well as heuristic optimization techniques to locate a transmitter with respect to receivers at different time intervals. For the scenarios investigated, both Macaulay and heuristic optimization methods achieve initial relative orbit determination.

Design And Analysis Of A Disk-Oriented Engine Combustor, Bennett M. Staton

Theses and Dissertations

In a novel approach to gas-turbine power production, an engine was designed and analyzed to use both a single-stage centrifugal compressor and single-stage radial in- ow turbine configured back-to-back. This air path reduced the axial length of the engine up to 60%, providing additional modularity in a gas-turbine engine that could be used to improve mobility of ground-based power units or increase the survivability of aircraft through the use of distributive propulsion. This increased modularity was made possible by the use of a circumferential ow combustor that substantially decreased the axial length of the burner and negated the need to …

Spacecraft Position Estimation And Attitude Determination Using Terrestrial Illumination Matching, Liberty M. Shockley

Theses and Dissertations

An algorithm to conduct spacecraft position estimation and attitude determination via terrestrial illumination matching (TIM) is presented consisting of a novel method that uses terrestrial lights as a surrogate for star fields. Although star sensors represent a highly accurate means of attitude determination with considerable spaceflight heritage, with Global Positioning System (GPS) providing position, TIM provides a potentially viable alternative in the event of star sensor or GPS malfunction or performance degradation. The research defines a catalog of terrestrial light constellations, which are then implemented within the TIM algorithm for position acquisition of a generic spacecraft bus. With the algorithm …

Fatigue Behavior Of An Advanced Melt-Infiltrated Sic/Sic Composite With Environmental Barrier Coating At 1200°C In Air And In Steam, Thaddeus M. Williams

Theses and Dissertations

Advanced aerospace applications such as aircraft turbine engine components, hypersonic flight vehicles, and spacecraft reentry thermal protection systems require structural materials that have superior long-term mechanical properties under high temperature, high pressure, and varying environmental factors, such as moisture. Because of their low density, high strength and fracture toughness at high temperatures SiC fiber-reinforced SiC matrix composites are being evaluated for aircraft engine hot-section components. In these applications the composites will be subjected to various types of mechanical loadings at elevated temperatures in oxidizing environments. Because their constituents are intrinsically oxidation-prone, the most significant problem hindering SiC/SiC composites is oxidation …

A Reference Architecture For Cubesat Development, Luke J. Farrell

Theses and Dissertations

Developing a space vehicle is a complex and detailed process, and while CubeSats are smaller and more accessible than traditional satellites the design process is relatively unchanged. Creating a viable space vehicle design requires detailed analysis of a set of mission needs in order to define the mission, with this need set used to then create the specific mission requirements. These requirements are used to formulate a concept of operations, and then move into developing a physical system for executing the mission. The successful production of CubeSats within an organization is contingent upon the accurate execution of the general CubeSat …