Aerospace Engineering Commons^™

Timoshenko Beam Viscous Damping Model For Spacecraft Cabling Dynamics, Brandi Mcpherson

Electronic Theses and Dissertations

With the increasing data handling and power requirements of today's spacecraft, accurately modeling the effects of cabling on spacecraft structural dynamics has become an increasingly important part of the design process. During testing, spacecraft cabling produces a damping effect on the system dynamics; however, current models often overpredict this response in higher frequency modes and produce unrealistic damping values. Previous models incorporated structural and viscous damping terms into Euler-Bernoulli and shear beams; this thesis presents a viscous damping model for Timoshenko beams that can accurately capture the effects of both spacecraft wiring and harnesses during the design phase. Damping in …

Analytical Strip Method For Thin Cylindrical Shells, John T. Perkins

Theses and Dissertations--Civil Engineering

The Analytical Strip Method (ASM) for the analysis of thin cylindrical shells is presented in this dissertation. The system of three governing differential equations for the cylindrical shell are reduced to a single eighth order partial differential equation (PDE) in terms of a potential function. The PDE is solved as a single series form of the potential function, from which the displacement and force quantities are determined. The solution is applicable to isotropic, generally orthotropic, and laminated shells. Cylinders may have simply supported edges, clamped edges, free edges, or edges supported by isotropic beams. The cylindrical shell can be stiffened …

Data-Driven Adaptive Reynolds-Averaged Navier-Stokes K - Ω Models For Turbulent Flow-Field Simulations, Zhiyong Li

Theses and Dissertations--Mechanical and Aerospace Engineering

The data-driven adaptive algorithms are explored as a means of increasing the accuracy of Reynolds-averaged turbulence models. This dissertation presents two new data-driven adaptive computational models for simulating turbulent flow, where partial-but-incomplete measurement data is available. These models automatically adjust (i.e., adapts) the closure coefficients of the Reynolds-averaged Navier-Stokes (RANS) k-ω turbulence equations to improve agreement between the simulated flow and a set of prescribed measurement data.

The first approach is the data-driven adaptive RANS k-ω (D-DARK) model. It is validated with three canonical flow geometries: pipe flow, the backward-facing step, and flow around an airfoil. For all 3 test …

Autonomous Quadrotor Collision Avoidance And Destination Seeking In A Gps-Denied Environment, Thomas C. Kirven

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis presents a real-time autonomous guidance and control method for a quadrotor in a GPS-denied environment. The quadrotor autonomously seeks a destination while it avoids obstacles whose shape and position are initially unknown. We implement the obstacle avoidance and destination seeking methods using off-the-shelf sensors, including a vision-sensing camera. The vision-sensing camera detects the positions of points on the surface of obstacles. We use this obstacle position data and a potential-field method to generate velocity commands. We present a backstepping controller that uses the velocity commands to generate the quadrotor's control inputs. In indoor experiments, we demonstrate that the …

Characterization Of Mechanical Properties In Nanoparticle Reinforced Hybrid Carbon Fiber Composites Using Photoluminescence Piezospectroscopy, Sanjida Jahan

Electronic Theses and Dissertations

Carbon fiber composites have become popular in aerospace structures and applications due to their light weight, high strength, and high performance. Hybrid carbon fiber reinforced polymer (HCFRP) composites with alumina nanoparticles reinforcement display improved material properties such as fracture toughness, resistance to crack propagation and improved fatigue life. However, homogeneous dispersion of nanoscale materials in the matrix is important for even distribution of the improved properties. Implementing silane coupling agents (SCAs) improves dispersion by acting as a bridge between organic and inorganic materials, which increases interfacial strength and decreases sedimentation by bonding the particulate filler to the fiber reinforcement. This …

Development And Implementation Of A Streamlined Process For The Creation And Mechanization Of Negative Poisson's Ratio Meso-Scale Patterns, Matthew Shuler

Electronic Theses and Dissertations

This thesis focuses on the development a streamlined process used to create novel meso-scale pattern used to induce negative Poisson's ratio (NPR) behavior at the bulk scale. This process includes, the development, optimization, and implementation of a candidate pattern. Currently, the majority of NPR structures are too porous to be utilized in conventional applications. For others, manufacturing methods have yet to realize the meso-scale pattern. Consequently, new NPR meta-materials must be developed in order to confer transformative thermomechanical responses to structures where transverse expansion is more desirable than contraction. For example, materials at high temperature. Additionally, patterns that take into …

Modeling Of Flow Generated Sound In A Constricted Duct At Low Mach Number Flow, Peshala Thibbotuwawa Gamage

Electronic Theses and Dissertations

Modelling flow and acoustics in a constricted duct at low Mach numbers is important for investigating many physiological phenomena such as phonation, generation of arterial murmurs, and pulmonary conditions involving airway obstruction. The objective of this study is to validate computational fluid dynamics (CFD) and computational aero-acoustics (CAA) simulations in a constricted tube at low Mach numbers. Different turbulence models were employed to simulate the flow field. Models included Reynolds Average Navier-Stokes (RANS), Detached eddy simulation (DES) and Large eddy simulation (LES). The models were validated by comparing study results with laser doppler anemometry (LDA) velocity measurements. The comparison showed …

Performance Degradation Analysis Of Aviation Hydraulic Piston Pump Based On Mixed Wear Theory, C. Zhang, S. Wang, M. Tomovic, L. Han

Engineering Technology Faculty Publications

This paper focuses on the mathematical modeling of axial piston pump through dividing the failure development of friction pair into lubrication, mixed lubrication and abrasion. Directing to the wedge-shaped oil film between cylinder block and valve plate, the support force distribution under the temperature variance was obtained. Considering the rough peak of valve plate, the contact load model is built under plastic deformation and elastic deformation and the corresponding wear volume is calculated. Computing the wear and tear along the counter-clockwise, the total amount of friction and wear can be calculated. Simulation and preliminary wear particle monitoring test indicates that …

Long And Short-Range Air Navigation On Spherical Earth, Nihad E. Daidzic

International Journal of Aviation, Aeronautics, and Aerospace

Global range air navigation implies non-stop flight between any two airports on Earth. Such effort would require airplanes with the operational air range of at least 12,500 NM which is about 40-60% longer than anything existing in commercial air transport today. Air transportation economy requires flying shortest distance, which in the case of spherical Earth are Orthodrome arcs. Rhumb-line navigation has little practical use in long-range flights, but has been presented for historical reasons and for comparison. Database of about 50 major international airports from every corner of the world has been designed and used in testing and route validation. …

Summary Of "Supersonic Jet And Rocket Noise", Kent L. Gee, Caroline P. Lubert, Alan T. Wall, Seiji Tsutsumi

Department of Mathematics and Statistics - Faculty Scholarship

This paper summarizes a two-part special session, “Supersonic Jet and Rocket Noise,” which was held during the 174th Meeting of the Acoustical Society of America in New Orleans, Louisiana. The sessions were cosponsored by the Noise and Physical Acoustics Technical Committees and consisted of talks by government, academic, and industry researchers from institutions in the United States, Japan, France, and India. The sessions described analytical, computational, and experimental approaches to both fundamental and applied problems on model and full-scale jets and rocket exhaust plumes.

A Method For Evaluating Aircraft Electric Power System Sizing And Failure Resiliency, Cory Kenneth Kross

Master's Theses

With the More Electric Aircraft paradigm, commercial commuter aircraft are increasing the size and complexity of electrical power systems by increasing the number of electrical loads. With this increase in complexity comes a need to analyze electrical power systems using new tools. The Hybrid Power System Optimizer (HyPSO) developed by Airbus SAS is a simulator designed to analyze new aircraft power systems. This thesis project will first provide a method to assess the reliability of complex aircraft electrical power systems before and after failure and reconfiguration events. Next, an add-on to HyPSO is developed to integrate the previously developed reliability …

Influence Of Magnetic Nanoparticles And Magnetic Stress On An Ionic Liquid Electrospray Source, Kurt Joseph Terhune

Dissertations, Master's Theses and Master's Reports

Two electrospray sources were developed to operate on an ionic liquid ferrofluid; one source was a pressure‑fed capillary electrospray source and the other was a novel electrospray source which used a magnetically‑induced instability to produce a peak from which an electric field could extract electrospray. Multiple characteristics of electrospray operation were examined for both sources using faraday plates/cups, a quartz crystal microbalance, a retarding potential analyzer, and a time-of-flight mass spectrometer. The ILFF electrosprays for a capillary source were shown to operate in a mixed ion/droplet regime. The mass flow of the electrospray beam was primarily transported by larger particles …

Investigation Of Rope Formation In Gas–Solid Flows Through A 90° Pipe Bend Using High-Speed Video And Cfd Simulations, Sai S. Guda, Steven L. Rowan, Tao Yang

Faculty & Staff Scholarship

A study of rope formation in gas–solid flows through abrupt turns has been conducted. Experiments in which high-speed video was recorded and analyzed for solid concentration profiles were compared to CFD simulations utilizing both RANS and large eddy simulation turbulence models. In both simulations and experiments, particle-laden flows of air and ground flaxseed, with solid loadings of 35, 42, and 51% were considered. The results of the study demonstrate that both RANS and large eddy simulation can accurately predict particle roping. Furthermore, simulations show that the roping phenomenon is strongly dependent upon selection of an appropriate value for the coefficient …

Study Of Experimentally Blended Wings, Ray Roos 2894888

Williams Honors College, Honors Research Projects

This aim of this senior design project is to investigate the combination of a Selig 1223 and FX 74-CL5-140 into one profile to increase lift without significantly increasing drag. Our project began with researching current solutions for high lift and low drag airfoils. We found two airfoils which would be the target of our research, a Selig 1223 and the FX 74-CL5-140. After learning about the Cl and Cd of the current airfoils we built and physically tested the airfoils using additive manufacturing. A pressure differential tunnel was used to validate the airfoils. After researching how to blend two airfoil …

Design And Construction Of An Optimum Method To Present Uncertainty Of Convective Weather Forecasts To Air Traffic Personnel, Anna K. Selchow, Austin Wright

Williams Honors College, Honors Research Projects

The purpose of this design project was to develop a new weather display for air traffic controllers to utilize that shows the probabilistic hazard information for convective weather forecasts. Multiple iterations of maps were generated and evaluated for overall effectiveness in conveying uncertainty information for convective weather observations and forecasts with the final maps being tested through interviews with retired air traffic personnel. The goal of these maps was to improve upon current convective weather displays to more accurately show uncertainty and probabilistic hazard information to aid the air traffic controllers (ATCs) in providing guidance for aircraft pilots.

Indoor Mapping Drone, Benjamin J. Plevny, Andrew Armstrong, Miguel Lopez, Davidson Okpara

Williams Honors College, Honors Research Projects

This project addresses the need for an autonomous indoor mapping system that will create a 3D map of an unknown physical environment in real time. The aerial system moves and avoids obstacles autonomously, without the need for human remote control or observation. An aerial system produces a map of an unknown indoor environment by transmitting data received from the aerial device’s sensors. The transmission occurs over a wireless channel from the aerial device to a remote server for processing and storage of the data. As the transmission is done in real time, the aerial system does not require hardware for …

System Identification Of A Circulation Control Unmanned Aerial Vehicle, Mohammed Agha

Electronic Theses and Dissertations

The advancement in automation and sensory systems in recent years has led to an increase the demand of UAV missions. Due to this increase in demand, the research community has gained interest in investigating UAV performance enhancing systems. Circulation Control (CC), which is an active control flow method used to enhance UAV lift, is a performance enhancing system currently studied. In prior research, experimental studies have shown that Circulation Control wings (CCW) implemented on class-I UAVs can reduce take-off distance by 54%. Wind tunnel tests reveal that CC improves aircraft payload capabilities through lift enhancement. Increasing aircraft payload capabilities causes …

Rlc Circuit Simulated Response For Pulsed-Power Fusion Propulsion, Coleton Cody

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Building Miniature-Sized Ion Thruster Using Split Ring Resonator (Srr), Toyofumi Yamaguchi

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Lehmier Launch System, Dylan Lehmier 5248813

Williams Honors College, Honors Research Projects

The Lehmier Launch System was designed to propel a 120lb rocket 30,000 feet. Creating 2150 psi of thrust and 27,500 N-s of total impulse, it is the largest rocket motor ever used by the Akronauts Rocket Design Team.

The Experimental Determination Of The Moment Of Inertia Of A Model Airplane, Michael Koken

Williams Honors College, Honors Research Projects

The objective of this project is to suggest that the moment of inertia for irregular shaped objects can easily be determined experimentally. The objects considered in this experiment were a solid wooden block and a model airplane. To ensure that the method and configuration is sufficient a wooden block with known moments of inertia was first tested, and the results from the experiment were compared to the known and accepted values. For this particular experiment, the periods were determined by timing how long 10 oscillations lasted for 10 different trials, and then taking the average of those 10 trials to …

Modeling Of Tow Wrinkling In Automated Fiber Placement Based On Geometrical Considerations, Roudy Wehbe

Theses and Dissertations

Automated manufacturing of fiber reinforced composite structures via numerically controlled hardware yields parts with increased accuracy and repeatability as compared to hand-layup parts. Automated fiber placement (AFP) is one such process in which structures or parts are built by adding bands of prescribed number of tows or slit-tape with prescribed width using robotic machine heads over 3D surfaces following prescribed paths. Despite the improved accuracy, different types of defects or manufacturing features arise during fabrication. These defects can be due to geometrical features, materials, and process planning parameters and are detected in the form of wrinkling, tow twist, tow folding, …

Theoretical Acoustic Absorber Design Approach For Lox/Lch4 Pintle Injector Rocket Engines, Jonathan Candelaria

Open Access Theses & Dissertations

Liquid rocket engines, or LREs, have served a key role in space exploration efforts. One current effort involves the utilization of liquid oxygen (LOX) and liquid methane (LCH4) LREs to explore Mars with in-situ resource utilization for propellant production. This on-site production of propellant will allow for greater payload allocation instead of fuel to travel to the Mars surface, and refueling of propellants to travel back to Earth. More useable mass yields a greater benefit to cost ratio. The University of Texas at El Paso's (UTEP) Center for Space Exploration and Technology Research Center (cSETR) aims to further advance these …

Experimental Investigation Of Cryogenic Convection And Boiling In Traditionally And Additively Manufactured Rocket Engine Cooling Channels, Armando Sandoval

Open Access Theses & Dissertations

The Center for Space Exploration and Technology Research at the University of Texas at El Paso, has designed, built, and optimized an experimental high heat flux test facility to investigate the heat transfer coefficient of liquid methane and other cryogenic propellants for regenerative cooled rocket engine design. The system is composed of a copper conduction based thermal concentrator that delivers heat flow into a single sub-scaled cooling channel (test article). This study focuses on optimizing this design of the high heat flux test facility to develop a more accurate method for measuring the conductive heat flow going into the cooling …

Development And Verification Of A Lab-Scale Green Propellant Hybrid Motor System, Shyamal Patel

Open Access Theses & Dissertations

Hybrid rocket propulsion offers the potential to combine advantages of both solid and liquid propellant systems, but low regression rates hinder their practicality. The suggested use of hydroxylammonium nitrate (HAN) based propellants in hybrids offers the potential for developing high impulse motors with low development and production costs. In this paper, I present the development of a small-scale system used to measure the regression rate of a hybrid motor. The system can accommodate fuel grains 5 cm long with an outer diameter of 6 cm and can implement the various decomposition gases needed for HAN. The motor firings of hydroxyl …

Design Of A 2000 Lbf Lox/Lch4 Throttleable Rocket Engine For A Vertical Lander, Israel Lopez

Open Access Theses & Dissertations

Liquid oxygen (LOX) and liquid methane (LCH4) has been recognized as an attractive rocket propellant combination because of its in-situ resource utilization (ISRU) capabilities, namely in Mars. ISRU would allow launch vehicles to carry greater payloads and promote missions to Mars. This has led to an increasing interest to develop spacecraft technologies that employ this propellant combination.

The UTEP Center for Space Exploration and Technology Research (cSETR) has focused part of its research efforts to developing LOX/LCH4 systems. One of those projects includes the development of a vertical takeoff and landing vehicle called JANUS. This vehicle will employ a LOX/LCH4 …

Design And Development Of A Delivery System For Green Ionic Monopropellants And Testing Of A 22n Thruster, Jaclyn Mona Mejia

Open Access Theses & Dissertations

LMP-103S and AFM-315E are emerging propellants that are less toxic to the environment than the propellants currently being used in spacecraft propulsion. Both propellants are a blend of liquid fuel, oxidizer and a majority percent of water. The diluted solutions enable the capability to handle and store the propellants with fewer requirements; for this reason, it decreases the overall cost of the propellants since it needs less precautions. The Missile Defense Agency (MDA) awarded the University of Texas at El Paso (UTEP) a contract to further research green propellants and eventually replace Hydrazide.

Development And Integration Of The Janus Robotic Lander: A Liquid Oxygen - Liquid Methane Propulsion System Testbed, Raul Ponce

Open Access Theses & Dissertations

Initiatives have emerged with the goal of sending humans to other places in our solar system. New technologies are being developed that will allow for more efficient space systems to transport future astronauts. One of those technologies is the implementation of propulsion systems that use liquid oxygen and liquid methane (LO2-LCH4) as propellants.

The benefits of a LO2-LCH4 propulsion system are plenty. One of the main advantages is the possibility of manufacturing the propellants at the destination body. A space vehicle which relies solely on liquid oxygen and liquid methane for its main propulsion and reaction control engines is necessary …

Quasi-Static Fracture Toughness Testing Of 7075 Aluminum For Spacecraft Separation Joint Applications, Ilse Alcantara

Open Access Theses & Dissertations

Separation joint systems are zero fault tolerant systems that have been used in complex aerospace applications such as vehicle stage separation and payload fairing removal. The structural members of separation joint systems must be able to withstand flight loads, but then completely fracture for instantaneous separation when an explosive is activated. The complex geometry and loading conditions of the structural member create a complicated stress state consisting of mixed tension and shear. A need exists to measure the fracture toughness of the material to ensure it will not support loads intended to fracture and measure its sensitivity to other variables, …

Quantifying The Characteristic Length Of A Combustor For An Ionic Liquid Monopropellant Thruster, Kimberly Marie Hogge

Open Access Theses & Dissertations

Ionic liquid monopropellants are currently being researched as a promising alternative to hydrazine in propulsion systems. This report presents a flame study that delineates the flame length of the expected decomposition products from an ionic liquid monopropellant. Through these studies, the characteristic length of a combustion chamber will be defined through calculations and empirical correlations. There is limited information on designing a propulsion system for an ionic liquid monopropellant. Therefore, defining the magnitude for an effective characteristic length serves as beneficial in designing a propulsion system for an ionic liquid monopropellant thruster.