Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2017

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 121 - 150 of 470

Full-Text Articles in Aerospace Engineering

Using P-Band Signals Of Opportunity Radio Waves For Root Zone Soil Moisture Remote Sensing, Phillip H. Lipinski, Benjamin R. Nold, James L. Garrison Aug 2017

Using P-Band Signals Of Opportunity Radio Waves For Root Zone Soil Moisture Remote Sensing, Phillip H. Lipinski, Benjamin R. Nold, James L. Garrison

The Summer Undergraduate Research Fellowship (SURF) Symposium

Retrieval of Root Zone Soil Moisture (RZSM) is important for understanding the carbon cycle for use in climate change research as well as meteorology, hydrology, and precision agriculture studies. A current method of remote sensing, GNSS-R uses GPS signals to measure soil moisture content and vegetation biomass, but it is limited to 3-5 cm of soil penetration depth. Signals of Opportunity (SoOp) has emerged as an extension of GNSS-R remote sensing using communication signals. P-band communication signals (370 MHz) will be studied as an improved method of remote sensing of RZSM. P-band offers numerous advantages over GNSS-R, including stronger signal …

Go to article

Additive Manufacturing Of High Solids Loading Hybrid Rocket Fuel Grains, Stephen P. Johnson, Michael Baier, Ibrahim E. Gunduz, Steven F. Son Aug 2017

Additive Manufacturing Of High Solids Loading Hybrid Rocket Fuel Grains, Stephen P. Johnson, Michael Baier, Ibrahim E. Gunduz, Steven F. Son

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hybrid rocket motors offer many of the benefits of both liquid and solid rocket systems. Like liquid engines, hybrid rocket motors are able to be throttled, can be stopped and restarted, and are safer than solid rocket motors since the fuel and oxidizer are in different physical states. Hybrid rocket motors are similar to solid motors in that they are relatively simple and have a high density-specific impulse. One of the major drawbacks of hybrid rocket motors is a slower burning rate than solid rocket motors. Complex port geometries provide greater burning surface area to compensate for lower burning rates …

Go to article

Using High Resolution Images To Investigate Fatigue Crack Initiation Of Alloys At The Microstructural Level, Michael P. Reinhold, Alberto Mello, Michael Sangid Aug 2017

Using High Resolution Images To Investigate Fatigue Crack Initiation Of Alloys At The Microstructural Level, Michael P. Reinhold, Alberto Mello, Michael Sangid

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microstructural features within a material dictate the material’s mechanical behavior and lead to localized strains as the sample is deformed. In order to further understand structural failure, an improved understanding of how microstructural features influence failure is necessary. Fatigue is one common mode of failure for aerospace applications, and a better understanding of the conditions of crack initiation can provide information that ultimately may increase longevity of aerospace systems. This paper investigates the hypothesis that fatigue crack initiation for a cyclically loaded sample is correlated to areas of higher localized strain. The experiment was conducted using a Ti-6Al-4V sample subjected …

Go to article

Operation Of The T-100 Hall Effect Thruster, Glynn Smith, Omar Dary, Alexey Shashurin Aug 2017

Operation Of The T-100 Hall Effect Thruster, Glynn Smith, Omar Dary, Alexey Shashurin

The Summer Undergraduate Research Fellowship (SURF) Symposium

The introduction of Hall Effect Thrusters from the former Soviet Union to the United States generated considerable interest in using the propulsion system aboard Western spacecraft. The established programs evaluated the SPT-100, and TAL-55 Hall Effect Thrusters for efficiency, lifetime, and performance characteristics. The T-100 model garnered only minor interest during this time compared with the same generation counterparts, the SPT-100, and TAL-55. This gap in knowledge on the efficiency, and performance of the T-100 warrants investigation into the design, and operation of the thruster. Operational characteristics will be measured on a restored T-100 Hall Thruster, using argon as a …

Go to article

Hazard Assessment Of Meteoroid Impact For The Design Of Lunar Habitats, Herta Paola Montoya, Shirley Dyke, Julio A. Ramirez, Antonio Bobet, H. Jay Melosh, Daniel Gomez Aug 2017

Hazard Assessment Of Meteoroid Impact For The Design Of Lunar Habitats, Herta Paola Montoya, Shirley Dyke, Julio A. Ramirez, Antonio Bobet, H. Jay Melosh, Daniel Gomez

The Summer Undergraduate Research Fellowship (SURF) Symposium

The design of self-sustaining lunar habitats is a challenge primarily due to the Moon’s lack of atmospheric protection and hazardous environment. To assure safe habitats that will lead to further lunar and space exploration, it is necessary to assess the different hazards faced on the Moon such as meteoroid impacts, extreme temperatures, and radiation. In particular, meteoroids pose a risk to lunar structures due to their high frequency of occurrence and hypervelocity impact. Continuous meteoroid impacts can harm structural elements and vital equipment compromising the well-being of lunar inhabitants. This study is focused on the hazard conceptualization and quantification of …

Go to article

Using Unmanned Aerial Vehicles (‘Drones’) To Collect Data From Tagged Fishers In The Environment, Vu A. Pham, Marc Horney, Aaron Drake Aug 2017

Using Unmanned Aerial Vehicles (‘Drones’) To Collect Data From Tagged Fishers In The Environment, Vu A. Pham, Marc Horney, Aaron Drake

STAR Program Research Presentations

Fisher (Pekania pennant) belongs to the weasel family. In October 2014, the United States Fish and Wildlife Service proposed to list the West Coast Distinct Population Segment of fisher as threatened under the Endangered Species Act. We wish to better define where fishers live within their habitats and use that information to improve conservation efforts. Previously, to track the behavior of wild fishers, researchers put tracker collars on the animals and relied on networks of fixed antennas on the ground in the environment to collect data. We are experimenting with using unmanned aerial vehicles (‘drones’) to collect data …

Go to article

Advanced Methods Of Nondestructive Inspection Of Composite Structures Based On Limited Angle X-Ray Computed Tomography, Ekaterina Bostaph Aug 2017

Advanced Methods Of Nondestructive Inspection Of Composite Structures Based On Limited Angle X-Ray Computed Tomography, Ekaterina Bostaph

Mechanical and Aerospace Engineering Dissertations - Archive

This research aimed to study the potential for breaking through object size limitations of current X-ray computed tomography (CT) systems by implementing a limited angle scanning technique. CT stands out among other industrial nondestructive inspection (NDI) methods due to its unique ability to perform 3D volumetric inspection, unmatched micro-focus resolution, and objectivity that allows for automated result interpretation. This work attempts to advance NDI technique to enable microstructural material characterization and structural diagnostics of composite structures, where object sizes often prohibit the application of full 360o CT. Even in situations where the objects can be accommodated within existing micro-CT configuration, …

Go to article

Modeling And Measurements Of Thermal Transport In Li-Ion Based Energy Conversion And Storage Devices, Krishna Shah Aug 2017

Modeling And Measurements Of Thermal Transport In Li-Ion Based Energy Conversion And Storage Devices, Krishna Shah

Mechanical and Aerospace Engineering Dissertations - Archive

Heat transfer is of significant importance in energy conversion and storage devices such as Lithium-ion batteries for its safe operation and performance. Li-ion batteries are considered to be the state of the art among the energy storage devices due to their very high energy density and high power density. However, the safety of Li-ion batteries has become a concern in light of recent incidents, where there have been catastrophic events reported due to overheating of large battery packs. It is imperative to fully understand the nature of thermal transport in Li-ion cells. However, this has not been explored in detail …

Go to article

Space Access Systems Design: Synthesis Methodology Development For Conceptual Design Of Future Space Access Systems, Loveneesh Rana Aug 2017

Space Access Systems Design: Synthesis Methodology Development For Conceptual Design Of Future Space Access Systems, Loveneesh Rana

Mechanical and Aerospace Engineering Dissertations - Archive

The early Conceptual Design (CD) of a Space Access System (SAS) is the most abstract, innovative, and technologically challenging phase throughout the entire aerospace product development life-cycle. While it is the most important life-cycle phase which influences around 80 percent of the overall life-cycle-cost, it is also the least understood design phase. The history of space access vehicle design provides numerous examples of projects that failed due to lack of a proper technology-hardware-mission assessment in the CD phase. The present dissertation addresses this crucial phase and develops a prototype best practice solution process to advance the current state of the …

Go to article

Micro/Nanoencapsulated Phase Change Materials (Pcms) Toward High Temperature Thermal Energy Storage Applications, Hanfei Zhang Aug 2017

Micro/Nanoencapsulated Phase Change Materials (Pcms) Toward High Temperature Thermal Energy Storage Applications, Hanfei Zhang

Mechanical and Aerospace Engineering Dissertations - Archive

Thermal energy is one of the most important renewable energy sources because of its abundancy. However, despite the long history of people practically trying to harvest thermal energy, the efficiency of thermal energy storage and application to daily life utilization is still a major limitation, especially for high temperature (>300oC) applications. Concentrating solar power (CSP) is one of the very few technologies that have been used commercially to produce electricity from solar thermal energy. Benefiting from the extra latent heat stored during melting/freezing, phase change materials (PCMs) with a high melting point are commonly used in these systems functioning …

Go to article

Field-Directed Fabrication Of Hierarchical Structures Toward Electrochemical Applications, Anirudh Balram Aug 2017

Field-Directed Fabrication Of Hierarchical Structures Toward Electrochemical Applications, Anirudh Balram

Mechanical and Aerospace Engineering Dissertations - Archive

The ubiquity of hierarchical structures in nature indicates an inherent advantage to having morphological features comprised of multiple length scales. Such structures help maximize interfacial surface area, allowing for efficient chemical reactions and mass transport despite volumetric constraints. In electrochemical applications such as batteries, supercapacitors, electrolysis, fuel cells, catalysis etc. there is a similar necessity to maximize electrochemically active surface area to facilitate facile charge and mass transport. Inspired by examples in nature, this work seeks to develop scalable fabrication techniques to obtain hierarchically structured high-performance electrodes for electrochemical applications, with a focus on energy applications. Particular emphasis was laid …

Go to article

Numerical Investigation Of Stability Characteristics Of A Jet In Counterflow, Siddarth Chintamani Aug 2017

Numerical Investigation Of Stability Characteristics Of A Jet In Counterflow, Siddarth Chintamani

Mechanical and Aerospace Engineering Dissertations - Archive

A jet in counterflow is a configuration in which a jet is issued into an opposing external stream of fluid. Some of the possible applications of this configuration include study of pollutant discharge into body of water, aerodynamic flame holder in after burner, reduction of drag and cooling of bluff body by ejecting a jet of coolant gas into counterflowing stream, thrust vectoring of supersonic jets, sonic boom mitigation. The instability associated with flow reversal which is observed in this configuration of the jet leads to enhanced mixing. However, a detailed understanding of the dynamics and control is needed to …

Go to article

Multi-Mesh Reduced-Order Basis Method For Finite Element Analysis, Ashkan Akbariyeh Aug 2017

Multi-Mesh Reduced-Order Basis Method For Finite Element Analysis, Ashkan Akbariyeh

Mechanical and Aerospace Engineering Dissertations - Archive

Reduced order modeling of differential equations parametrized over a parameter space can be used to accelerate optimization and parameter estimation problems. The method of snapshots or reduced order basis is well established among researchers as a tool to build reduced order models of ordinary differential equations. The reduced order basis method has been utilized for numerical solution of parametric PDE problems by researchers in recent years and has many advantages over response surface methods. The application of ROB to finite element analysis has been restricted to using a fixed mesh for snapshots. In this work, a new method is developed …

Go to article

Thermal Measurement And Optimization Of Materials And Processes In A Li-Ion Cell, Vivek Vishwakarma Aug 2017

Thermal Measurement And Optimization Of Materials And Processes In A Li-Ion Cell, Vivek Vishwakarma

Mechanical and Aerospace Engineering Dissertations - Archive

Applications of Lithium-ion cells range from consumer electronics to electric cars because of their excellent electrochemical performance and energy density. However, a Li-ion cell also suffers from poor thermal transport characteristics, which reduces performance, causes overheating and thermal runaway. This work contributes towards thermal characterization of key Li-ion battery materials and identifies and improves the rate-limiting, material-level thermal conduction process in a Li-ion cell. Among the various materials within a Li-ion cell, the separator is expected to have the lowest thermal conductivity. In this work, we have carried out first-ever measurements of thermal conductivity and heat capacity of the separator …

Go to article

Flexible-Continuum Robot For Bladder Tissue Diagnostics, Samson Abimbola Adejokun Aug 2017

Flexible-Continuum Robot For Bladder Tissue Diagnostics, Samson Abimbola Adejokun

Mechanical and Aerospace Engineering Theses - Archive

The aim of this thesis is to investigate and develop a robotic system capable of a transurethral palpation of any targeted area on the bladder interior wall tissue to determine the biomechanical properties of the tissue considering the urinary tract geometric constraints and to demonstrate the motion kinematics of such robot to achieve a desired robot pose normal to any localized region throughout the bladder workspace. Current technologies have, to varied degree of success, provide approximate, global diagnostics information to bladder tissue elasticity. However, no direct access qualitative methods to measure the bladder tissue properties are known. For this reason, …

Go to article

Enhancing Indirect / Direct Evaporative Heat Exchanger In Data Center Cooling By Using Phase Change Material, Ahmed Ali Abuklam Aug 2017

Enhancing Indirect / Direct Evaporative Heat Exchanger In Data Center Cooling By Using Phase Change Material, Ahmed Ali Abuklam

Mechanical and Aerospace Engineering Theses - Archive

Electrical usage in data center continues to grow and recent projection estimate that it contributes 2% in the electricity use in the U.S. One method of controlling the electrical usage during cooling is to reduce or eliminate mechanical cooling; however, using indirect/direct evaporative (IDE) cooling system is starting to be quite popular. IDE has limitations and in this paper we will show how phase change material (PCM) can extend the cooling capacity of IDE. The PCM has been used for temperature control operations. Latent heat storage is one of the most efficient ways of storing thermal energy in PCM. The …

Go to article

Cfd Simulation And Design Optimization To Improve Cooling Performance Of Open Compute ‘Big Sur’ Server, Mangesh Mohan Dhadve Aug 2017

Cfd Simulation And Design Optimization To Improve Cooling Performance Of Open Compute ‘Big Sur’ Server, Mangesh Mohan Dhadve

Mechanical and Aerospace Engineering Theses - Archive

In recent years, there have been a phenomenal increase in Artificial Intelligence and Machine Learning that require data collection, mining and using data sets to teach computers certain things to learn, analyze image and speech recognition. Machine Learning tasks require a lot of computing power to carry out numerous calculations. Therefore, most servers are powered by Graphics Processing Units (GPUs) instead of traditional CPUs. GPUs provide more computational throughput per dollar spent than traditional CPUs. Open Compute Servers forum has introduced the state-of-the-art machine learning servers “Big Sur” recently. Big Sur unit consists of 4OU (OpenU) chassis housing eight NVIDIA …

Go to article

Analysis Of Composite Structures With Curvature Under Temperature Environment, Muthu Ram Prabhu Elenchezhian Aug 2017

Analysis Of Composite Structures With Curvature Under Temperature Environment, Muthu Ram Prabhu Elenchezhian

Mechanical and Aerospace Engineering Theses - Archive

Composite structures are frequently exposed to environments with change in temperatures during their service life. The thermal behaviours of the laminated composite structures are more pronounced than that of the structures made of isotropic materials. For the structures under thermal environment, extensive studies have been conducted to investigate the induced thermal stresses and deformation of composite laminated plates by linear/non-linear analysis and composite structures by finite element analysis. The main focus of this study is concentrated on development of an analytical method for analyzing composite thin shells and/or moderate curved beam structures under temperature environment. This includes the derivation of …

Go to article

Finite Element Analysis On Hybrid Boron-Carbon Composites, Amruta Rupa Nemani Aug 2017

Finite Element Analysis On Hybrid Boron-Carbon Composites, Amruta Rupa Nemani

Mechanical and Aerospace Engineering Theses - Archive

Adaptability to different situations and the ease of combination makes composites one of the most extensively used materials in the engineering industries. One of the ways of managing properties of composites is hybridization of different fibers in one composite. This work merely focuses upon the analysis of effective stiffness of Hybrid materials which is carried out using Finite Element Method. A series of models were experimented in a sequence by imposing various conditions on each of them. Boron and Carbon fibers were used primarily for these experiments because of their better compatibility than other combinations of fibers. Due to the …

Go to article

Thermal Modeling Of 3-Dimensionally Stacked Dram Memory, Ratnesh Raj Aug 2017

Thermal Modeling Of 3-Dimensionally Stacked Dram Memory, Ratnesh Raj

Mechanical and Aerospace Engineering Theses - Archive

A large fraction of energy consumed in modern microelectronic devices and systems is taken up by memory access operations, which is expected to cause significant temperature rise. Since memory access operations are very short this is expected to inherently be a transient thermal phenomenon. Despite the critical importance of thermal management in microelectronics, not much work exists on understanding the nature of thermal transport during memory access operations. In this work, a mathematical model to predict the transient temperature rise within a 3D layered memory chip is presented. Most heat-generating memory access processes occur over a short timescale for which …

Go to article

Numerical Simulation Of Flow In Fluidic Valves In Rotating Detonation Engines, Nandini Gopalakrishnan Aug 2017

Numerical Simulation Of Flow In Fluidic Valves In Rotating Detonation Engines, Nandini Gopalakrishnan

Mechanical and Aerospace Engineering Theses - Archive

Rotating detonation engines (RDE) have received considerable research attention in recent times for use in propulsion systems. The cycle frequency of operation of an RDE can be as high as 10,000 Hz. Conventional mechanical valves cannot operate at such high frequencies, leading to the need for propellant injectors or valves with no moving parts. A fluidic valve is such a valve and is the focus of this study. The valve consists of an orifice connected to a constant area plenum cavity which operates at constant pressure. The fluidic valve supplies propellants to the detonation tube through the orifice. Hydrogen – …

Go to article

Experimental And Computational Study Of Multi-Level Cooling Systems At Elevated Coolant Temperatures In Data Centers, Manasa Sahini Aug 2017

Experimental And Computational Study Of Multi-Level Cooling Systems At Elevated Coolant Temperatures In Data Centers, Manasa Sahini

Mechanical and Aerospace Engineering Dissertations - Archive

Data centers house a variety of compute, storage, network IT hardware where equipment reliability is of utmost importance. Heat generated by the IT equipment can substantially reduce its service life if T_(J,Max), maximum temperature that the microelectronic device tolerates to guarantee reliable operation, is exceeded. Hence, data center rooms are bound to maintain continuous conditioning of the cooling medium. This approach often results in over-provisioned cooling systems. In 2014, U.S. Data center electricity consumption is about 1.8% of the total electrical energy in the country. Hence, data center power and cooling have become significant issues facing the IT industry. The …

Go to article

Prediction Of Process-Induced Defects By Ply-Drops In The Design Optimization Of A Complex Composite Laminate, Sitanshu Pandya Aug 2017

Prediction Of Process-Induced Defects By Ply-Drops In The Design Optimization Of A Complex Composite Laminate, Sitanshu Pandya

Mechanical and Aerospace Engineering Theses - Archive

The objective of this work is to characterize manufacturing process-induced warping defects due to ply drops in composite laminates to guide composite laminate design. Composite laminate optimization seeks weight efficient models, but the process can also generate complex ply geometry, which compounds the challenges of the already rigorous composite laminate manufacturing process. Increased design complexity enhances the likelihood of manufacturing process-induced defects like warping; therefore, it is important to predict such defects in the design phase to make the product more efficient yet producible and thereby avoid such defects. This work study is manufacturing process induced warpage in complex composite …

Go to article

Cyber-Physical System Characterization And Co-Regulation Of A Quadrotor Uas, Seth E. Doebbeling Aug 2017

Cyber-Physical System Characterization And Co-Regulation Of A Quadrotor Uas, Seth E. Doebbeling

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

An Unmanned Aircraft System (UAS) is a Cyber-Physical System (CPS) in which a host of real-time computational tasks contending for shared resources must be cooperatively managed to obtain mission objectives. Traditionally, control of the UAS is designed assuming a fixed, high sampling rate in order to maintain reliable performance and margins of stability. But emerging methods challenge this design by dynamically allocating resources to computational tasks, thereby affecting control and mission performance. To apply these emerging strategies, a characterization and understanding of the effects of timing on control and trajectory following performance is required. Going beyond traditional control evaluation techniques, …

Go to article

Design, Development And Implementation Of Intelligent Algorithms To Increase Autonomy Of Quadrotor Unmanned Missions, Diego F. Garcia Herrera Aug 2017

Design, Development And Implementation Of Intelligent Algorithms To Increase Autonomy Of Quadrotor Unmanned Missions, Diego F. Garcia Herrera

Doctoral Dissertations and Master's Theses

This thesis presents the development and implementation of intelligent algorithms to increase autonomy of unmanned missions for quadrotor type UAVs. A six-degree-of freedom dynamic model of a quadrotor is developed in Matlab/Simulink in order to support the design of control algorithms previous to real-time implementation. A dynamic inversion based control architecture is developed to minimize nonlinearities and improve robustness when the system is driven outside bounds of nominal design. The design and the implementation of the control laws are described. An immunity-based architecture is introduced for monitoring quadrotor health and its capabilities for detecting abnormal conditions are successfully demonstrated through …

Go to article

Effect Of Boundary-Layer Tripping On Turbulence Generation And Trailing-Edge Noise In Transitional Airfoils, James Benjamin Lewis Aug 2017

Effect Of Boundary-Layer Tripping On Turbulence Generation And Trailing-Edge Noise In Transitional Airfoils, James Benjamin Lewis

Doctoral Dissertations and Master's Theses

The need arises for developing quiet aircraft and silent Unmanned Aerial Vehicles (UAVs) to minimize the environmental effects as well as for stealth missions. We focus here on attempting to directly predict the noise associated with airframe by considering a single isolated airfoil. Developing an ability to directly predict the radiated noise and how it is generated is a first step for passive or active control of the generated noise. We choose herein a NACA0012 airfoil and specific flow condition to test whether we can directly predict the sound in accordance with the corresponding experimental data identified in the Benchmark …

Go to article

Meshless Method For Simulation Of Compressible Flow, Ebrahim Nabizadeh Shahrebabak Aug 2017

Meshless Method For Simulation Of Compressible Flow, Ebrahim Nabizadeh Shahrebabak

UNLV Theses, Dissertations, Professional Papers, and Capstones

In the present age, rapid development in computing technology and high speed supercomputers has made numerical analysis and computational simulation more practical than ever before for large and complex cases. Numerical simulations have also become an essential means for analyzing the engineering problems and the cases that experimental analysis is not practical. There are so many sophisticated and accurate numerical schemes, which do these simulations. The finite difference method (FDM) has been used to solve differential equation systems for decades. Additional numerical methods based on finite volume and finite element techniques are widely used in solving problems with complex geometry. …

Go to article

A Mathematical Model And Numerical Simulations Of Redox Electrochemical Systems With Mhd And Natural Convection, Kakkattukuzhy M. Isaac, Fangping Yuan Aug 2017

A Mathematical Model And Numerical Simulations Of Redox Electrochemical Systems With Mhd And Natural Convection, Kakkattukuzhy M. Isaac, Fangping Yuan

Collaborative Research: Actively Controllable Microfluidics with Film-Confined Redox-Magnetohydrodynamics -- Video and Data

A comprehensive mathematical model for redox electrochemical systems with magnetohydrodynamics (MHD) and natural convection are presented. The model is based on density changes in isothermal systems that accompany redox reaction at the electrode due to supporting electrolyte ions migrating into and out of the diffusion layer to satisfy electroneutrality. Numerical simulations have been performed for an axisymmetric, milli-electrode electrochemical cell with gravity directed along the axis in both directions to investigate the effect of the electrode orientation with respect to gravity. Results show that natural convection is significant in both cases, with the maximum velocity being an order of magnitude …

Go to article

Wind Farm Power Prediction In Complex Terrain, Micah Sandusky Aug 2017

Wind Farm Power Prediction In Complex Terrain, Micah Sandusky

Boise State University Theses and Dissertations

There has been increasing interest in predicting the velocity field within wind farms in complex terrain for resource assessment, turbine siting, and power forecasting. These capabilities are made possible by advancements in computational speed from a new generation of computing hardware and numerical methods. The current thesis research focuses on two technical components to advance the current state in wind power forecasting. The first component is improved prediction of wind flow over complex terrain using the versatile immersed boundary method to represent surface boundary conditions on a fixed Cartesian mesh. The proposed approach embodies the law-of-the-wall for rough surfaces and …

Go to article

Atmospheric Microbial Community Sampling System For Varying Altitude Collection, Kenneth David Domingue Aug 2017

Atmospheric Microbial Community Sampling System For Varying Altitude Collection, Kenneth David Domingue

Masters Theses

The study of airborne microbial communities in the vertical atmosphere is an area of research in which very little data has been collected and analyzed. Developing a vehicle to house biological sampling equipment that collects, and mitigates contamination is required by a team of biology researchers to perform sampling of atmospheric microbial communities. This study uses a sampler box that is attached to aerostatic vehicles: zero pressure balloons and tethered balloon/kite structures. Zero pressure balloons are used for sampling at altitudes above 150 m above sea level, and tethered balloon/kite structures are used for sampling at 30 m and 150 …

Go to article

First Prev Next Last