Aerospace Engineering Commons^™

The Decomposition Of Hydroxylammonium Nitrate Under Vacuum Conditions, Gregory A. Neff

Masters Theses

This research investigates the decomposition of the ionic liquid: hydroxylammonium nitrate (HAN), under vacuum conditions. All research was conducted at the Aerospace Laboratory for Plasma Experiments (ALPE) at Western Michigan University. Hydroxylammonium nitrate solution 24% wt. in H2O was used consistently throughout this research. A variety of temperatures and pressures ranging from 23°C to 645°C and 6E-3 Torr to 4 Torr, respectively, were used to decompose HAN. The primary gaseous species resulting from these decomposition conditions are N2O, NO, and trace amounts of NO2. The formation of H2O, and N2 is conditional on the experimental conditions, and the formation of …

Understanding Millennial, Generation X, And Baby Boomer Preferred Leadership Characteristics: Informing Today’S Leaders And Followers, Lee-Volker Cox

Dissertations

Purpose. This quantitative study’s purpose was to describe and determine the degree of difference and importance of leadership characteristics as perceived by Baby Boom, Generation X, and Millennial generational cohort followers in STEM-related U.S.-based or headquartered aerospace and computer organizations as measured by the Multigenerational Leadership Characteristics Questionnaire (MLCQ).

Methodology. This was a cross-sectional, nonexperimental, comparative and correlational quantitative, ex post facto study. A web-based MLCQ was developed after conducting an academic literature review. Participants used a 6-point Likert scale identifying the importance of 30 characteristics with 2 aggregation questions identifying the most and least important characteristics; 408 members of …

Multi-Cubesat Deployment Strategies: How Different Satellite Deployment Schemes Affect Satellite Separation And Detection For Various Types Of Constellations And Missions, Scott A. Biehl Jr.

Theses and Dissertations

As economics drive an increased demand for small satellites and, consequently, an increase in the number of satellites deployed per launch, different deployment schemes and their effects on satellite dynamics must be well understood. While there are advantages to deploying multiple satellites at once, users may have trouble with tracking, identifying, and communicating with their satellites. This investigation examines the deployment of eight 3U CubeSats, and the resulting relative motion within a constellation. Both the distance between any two satellites within a constellation and the volume of a polygon encompassing a constellation are used to analyze the satellite dynamics within …

Liquid Fuel Film Cooling: A Cfd Analysis With Hydrocarbon Fuel, Jacob D. Bills

Theses and Dissertations

Cooling of liquid rocket engine combustion chambers and nozzles is a critical component to liquid rocket engine design. A common method of cooling is liquid fuel film cooling. Liquid fuel is injected along the surface of the wall to act as a barrier against the core combustion gases. A numerical model is developed for simulating liquid fuel _lm cooling in a rocket engine using a hydrocarbon fuel. The model incorporates turbulent multiphase ow with species transport within the commercial ANSYS® Fluent CFD software. Conjugate heat transfer is simulated through walls containing embedded cooling channels. A novel User Defined Function is …

Localized Plasma Measurement During Instability Modes In A Hall Thruster, David A. Cunningham

Theses and Dissertations

Hall thrusters are a key technology for current and future unmanned satellites, striking a balance between thrust and fuel economy suitable for many mission profiles of interest. Despite their extensive flight heritage and a large body of research, many phenomena occurring in the plasma discharge of Hall thrusters are not well understood. A combination of intrusive and non-intrusive measurement techniques were used to investigate the properties of the exhaust plume of two Hall thrusters and correlate optical characteristics of oscillating modes with the plasma potential and azimuthal current distribution during those modes. A strong trend was found associating the optical …

Conceptual Design, Structural Analysis, And Design Space Exploration Of A Vacuum Lighter Than Air Vehicle, Brian C. Cranston

Theses and Dissertations

The research detailed in this study investigates an internal vacuum as well as its optimal structural design, utilizing currently available materials, as an alternative to traditional gases to create and sustain buoyancy in lighter than air vehicles. To date, the consideration of a vacuum lighter than air vehicle has been limited to three sources of literature, the earliest of which dates back to 1663. This study will initially summarize and review this literature. We will then combine finite element analysis, dimensional analysis, design of experiments, and response surface methodology studies to explore the feasibility, and the functional design of a …

Key Detection Rate Modeling And Analysis For Satellite-Based Quantum Key Distribution, Jonathan C. Denton

Theses and Dissertations

A satellite QKD model was developed and validated, that allows a user to determine the optimum wavelength for use in a satellite-based QKD link considering the location of ground sites, selected orbit and hardware performance. This thesis explains how the model was developed, validated and presents results from a simulated year-long study of satellite-based quantum key distribution. It was found that diffractive losses and atmospheric losses define a fundamental trade space that drives both orbit and wavelength selection. The optimal orbit is one which generates the highest detection rates while providing equal pass elevation angles and durations to multiple ground …

Orbital Resonances In The Vinti Solution, Laura M. Duffy

Theses and Dissertations

The Vinti Solution offers a more accurate model than the two-body problem as an orbital propagator. Unfortunately, the Vinti solution contains small divisors near orbital resonances in the perturbative terms of the Hamiltonian, which lead to inaccurate orbital predictions. One approach to avoid the small divisors is to apply transformation theory. The methodology of this research is to identify the perturbative terms of the Vinti Solution, perform a coordinate transformation, and derive the new equations of motion for the Vinti system near orbital resonances. The analysis in this research focuses on the 2:1 resonance, which includes the Global Positioning System. …

Spectroscopic Measurement Of Gas Temperature In Small Internal Combustion Engines, Matthew J. Deutsch

Theses and Dissertations

The Small Engine Research Bench (SERB) was used previously to measure spatially and temporally averaged heat flux, as well as local, instantaneous heat flux at several external locations, for a series of small engines (1 - 10 kW). This investigation obtained time averaged crank angle resolved measurements of the in-cylinder gas temperature using Fourier transform infrared (FTIR) absorption thermometry. The results, coupled with heat flux measurements, will enable the validation or refinement of existing thermal energy loss models.

Effects Of Additive Manufacturing Methods On The Dynamic Properties Of 15-5ph Stainless Steel, Allison A. Dempsey

Theses and Dissertations

Experimental research was conducted to determine the dynamic properties and characterize the microstructure of 15-5PH Stainless Steel manufactured through Direct Metal Laser Sintering (DMLS) additive manufacturing (AM) processes and heat treated using common heat treatment protocols. A thorough understanding of the material's properties is necessary before such parts are utilized in an operational capacity. Of the five builds, two deviated significantly from the specified composition of 15-5PH stainless steel. The remaining three builds, possessing the desired composition and crystalline structure, were tested in compression and tension at two strain rates. Tension tests using a reflected wave and a momentum trap …

Space Object Self-Tracker On-Board Orbit Determination Analysis, Stacie M. Flamos

Theses and Dissertations

Due to the United States' growing dependence on space based assets and the in- creasing number of resident space objects (RSO), improvement of Space Situational Awareness (SSA) capabilities is more necessary than ever. As a way to aid in this need, the Air Force Institute of Technology (AFIT) is developing the Space Object Self-Tracker (SOS) as a proof-of-concept experimental satellite for RSO precision tracking and collision avoidance system in Low Earth Orbit (LEO). Specifically, SOS will use Global Positioning System (GPS) position estimates for on-board orbit de- termination. Currently, SOS will use the Simplified General Perturbations-4 (SGP4) algorithm as its …

Surface Roughness Of Electron Beam Melting Ti-6al-4v Effect On Ultrasonic Testing, Evan T. Hanks

Theses and Dissertations

Experimental research was conducted on the effects of surface roughness on ultrasonic non-destructive testing of Electron Beam Melted (EBM) additively manufactured Ti-6Al-4V. Additive Manufacturing (AM) is a developing technology with many potential benefits, but certain challenges posed by its use require further research before AM parts are viable for widespread use in the aviation industry. Possible applications of this new technology include, Aircraft Battle Damage Repair (ABDR), small batch manufacturing to fill supply gaps, and replacement for obsolete parts. The research presented here assesses the effectiveness of ultrasonic inspection in detecting manufactured flaws in EBM manufactured Ti-6Al-4V. EBM products are …

Enhanced Flow Migration In Full Annular Ultra Compact Combustor, Nicholas A. Gilbert

Theses and Dissertations

Since combustion efficiency in modern jet engines has stabilized, attention has turned to improving the combustor by improving the thrust-to-weight ratio. The Ultra Compact Combustor (UCC) is a means to reduce the weight of the combustor while ensuring exhaust meets increasingly stringent government emission standards. Combustion occurs within the UCC under a g-load in the circumferential direction, which maintains combustion efficiency while decreasing axial combustor length. Previous analysis optimized the combustion chamber flame characteristics with a common upstream air source. Previously, issues for the UCC were inspired by integration into a traditional axial turbojet. The focus of this investigation was …

Investigation Into Reynolds Number Effects On A Biomimetic Flapping Wing, Daniel K. Hope

Theses and Dissertations

This research investigated how the nature of the wing changed as a function of Reynolds number by measuring the forces produced by wings with varying characteristic lengths, tested at varying air densities. Increasing the wing span increased the overall weight of the wing, which reduced the 1st natural frequency; and did not result in an increase in vertical force over the baseline 50 mm wing. However; if the decrease in natural frequency was counteracted by increasing the thickness of the joint material in the linkage mechanism, vertical force production did increase over the baseline wing planform. Negligible forces and moments …

Evaluation Of Unmanned Aircraft Flying Qualities Using Jsbsim, Joshua P. Kim

Theses and Dissertations

Flying qualities data can be used to predict the future performance of aircraft; however, no flying qualities requirements exist for Unmanned Aerial Vehicles (UAVs). The intent of flying qualities requirements is to guarantee the safety and operational effectiveness of the aircraft. Flying qualities requirements have been extensively researched and specified for fixed-wing and rotary-wing manned aircraft based on a substantial database of assessments. The critical issue today in flying qualities is how to extend them to pilotless aircraft. A simulation study using an open-source flight dynamics model (JSBSim) was conducted to perform various performance maneuvers and evaluate how well the …

Analysis Of A Modified Equivalent Circuit Model For Lithium-Ion Battery Modules In Cubesats, James J. Liu

Theses and Dissertations

Failure of the electrical power system (EPS) to meet mission requirements is a common problem in nano-size satellites commonly referred to as CubeSats. The motivation for this research stems from the desire to prevent EPS failure through a process of testing and space qualification of components. Utilizing models to predict the behavior of an EPS before it is designed, built, and tested for space can provide critical insight in areas of limitation in performance and survivability. Modeling an entire EPS system is challenging because it requires extensive knowledge of all components and their behavior. This research focuses specifically on the …

Performance Testing Of Various Nozzle Design For Water Electrolysis Thruster, Yuen Liu

Theses and Dissertations

The purpose of this research is to develop new nozzles for the HYDROS^TM thruster, a pulsed chemical thruster, to improve the current flight performance. This research consists of a base line test of the factory nozzle, as well as testing of three 15-degree conical nozzles with different expansion ratios. Experiments were conducted at plenum pressures 30, 40, and 45 psia to ensure the thruster is throttleable. Impulse bit data was collected through measuring the impulse response of each firing using a torsional balance thrust stand. Analysis of the thruster performance included calculations of impulse bit, specific impulse, thrust coefficient, …

Geolocation Of Rf Emitters Using A Low-Cost Uav-Based Approach, Michael A. Magers

Theses and Dissertations

The proliferation of unmanned aerial vehicles (UAVs) in both military and civilian settings has prompted great interest in finding new and innovative ways to utilize these tools. One such application is to locate ground-based radio emitters from a UAV platform. The goal of this research is to study the feasibility of a low-cost (on the order of $1000) UAV geolocation platform. To accomplish this goal, a series of both real-world flight testing and computer simulated scenarios were conducted. Simulations for different sensor uncertainties and approach path scenarios such as loiter and button hook patterns were investigated. Results showed that a …

Development Of A Modularized Software Architecture To Enhance Ssa With Cots Telescopes, Julian P. Mccafferty

Theses and Dissertations

As the catalog of Earth orbiting objects continues to grow exponentially, so too does the necessity for Space Situational Awareness (SSA). Previous work at AFIT has explored augmenting the Space Surveillance Network (SSN) by demonstrating detection and tracking of orbiting objects using Commercial-Off-The-Shelf (COTS) telescopes and Air Force generated Two-Line Element Sets (TLE). This research explores the process of developing and reengineering code into a modularized, hierarchical component architecture designed for the end user while enabling developers to continue to modify the software for future applications. Three graphical user interfaces (GUI) are compiled into standalone executable programs using MATLAB for …

Toward Automated Aerial Refueling: Relative Navigation With Structure From Motion, Kevin W. Colson

Theses and Dissertations

The USAF's use of UAS has expanded from reconnaissance to hunter/killer missions. As the UAS mission further expands into aerial combat, better performance and larger payloads will have a negative correlation with range and loiter times. Additionally, the Air Force Future Operating Concept calls for \formations of uninhabited refueling aircraft...[that] enable refueling operations partway inside threat areas." However, a lack of accurate relative positioning information prevents the ability to safely maintain close formation flight and contact between a tanker and a UAS. The inclusion of cutting edge vision systems on present refueling platforms may provide the information necessary to support …

Visual-Ins Using A Human Operator And Converted Measurements, Turner J. Montgomery

Theses and Dissertations

A method human operated INS aiding is explored in which the pilot identifies and tracks a ground feature of unknown position over a short measurement epoch using an E/O sensor. One then refers to Visual-INS. In contrast to current research trends, a human operator is entrusted with visually tracking the ground feature. In addition, a less conventional measurement linearization technique is applied to generate “converted” measurements. A linear regression algorithm is then applied to the converted measurements providing an estimate of the INS horizontal velocity error and accelerometer biases. At the completion of the measurement epoch, the INS is corrected …

Real-Time Implementation Of Vision-Aided Monocular Navigation For Small Fixed-Wing Unmanned Aerial Systems, Timothy I. Machin

Theses and Dissertations

The goal of this project was to develop and implement algorithms to demonstrate real-time positioning of a UAV using a monocular camera combined with previously collected orthorectified imagery. Unlike previous tests, this project did not utilize a full inertial navigation system (INS) for attitude, but instead had to rely on the attitude obtained by inexpensive commercial off-the-shelf (COTS) autopilots. The system consisted of primarily COTS components and open-source software, and was own over Camp Atterbury, IN for a sequence of flight tests in Fall 2015. The system obtained valid solutions over much of the flight path, identifying features in the …

Evaluation Of Verification Approaches Applied To A Nonlinear Control System, Kerianne H. Gross

Theses and Dissertations

As the demand for increasingly complex and autonomous systems grows, designers may consider computational and artificial intelligence methods for more advanced, re- active control. While the performance gained by such increasingly intelligent systems may be superior to traditional control techniques, the lack of transparency in the systems and opportunity for emergent behavior limits their application in the field. New verification and validation methods must be developed to ensure the output of such controllers do not put the system or any people interacting with it in danger. This challenge was highlighted by the former Air Force Chief Scientist in his 2010 …

Short Duration Missions To Earth Crossing Asteroids, James B. Millar Iii

Theses and Dissertations

My investigation of the Near Earth Object (NEO) catalog has led to identification of numerous short duration, under 40 days, mission opportunities in the future for three different mission types: uncrewed fly-by, uncrewed arrival, and crewed arrival. 2-body propagation techniques were used to model the orbits of various asteroid candidates and the Earth to determine when a close approach would occur. Once the dates were calculated, distance between the bodies was computed to estimate the ∆V to complete the mission. From the mission ∆V values, a possible mission duration was also computed. The values were analyzed to determine the best …

Investigation Into Active Spanwise Camber Deformation On The Lateral Stability And Roll Control Of The X-56a Compared To Conventional Ailerons, Eric T. Yerly

Theses and Dissertations

"This research compares the stability and roll characteristics of an X-56A using AFRL’s Variable Camber Complaint wing technology to actively change wing camber compared to conventional ailerons deflected at set angles. An analysis of the stability and roll characteristics was modeled using a 3-D vortex lattice theory simulation, and that data was compared to wind tunnel testing to verify and validate the model results. Wind tunnel data was collected using 19 inch 3-D printed scale models with wings fabricated with a pre-determined percentage of camber deformation, as well as models with fixed aileron deflections. The full span model changed camber …

Military Applications Of High-Altitude Satellite Orbits In A Multi-Body Dynamical Environment Using Numerical Methods And Dynamical Systems Theory, Meredith M. Wilmer

Theses and Dissertations

The circular restricted three-body problem (CR3BP) is a simplified dynamical model for a satellite under the gravitational influence of both the Earth and the Moon, maintaining closer fidelity to the gravitational environment experienced by a high-altitude Earth-orbiting spacecraft than modeling in the Earth-satellite two-body problem. Resonant orbit arcs are used to determine an initial guess to input into an algorithm that computes a trajectory solution with specific design requirements and constraints. A test case uses this method to compute a lunar fly-by transfer solution requiring less than two-body transfer methods and offers an unusual pathway that adds an unpredictability element …

Influence Of Coolant Flow Rate Parameters In Scaling Gas Turbine Cooling Effectiveness, Connor J. Wiese

Theses and Dissertations

Film cooling scheme development for use in gas turbine engines often entails the characterization of adiabatic wall temperature distributions in order to determine the driving temperatures for the convective heat transfer processes in the engine. For convenience, adiabatic effectiveness experiments are often performed near room temperature and presumed to scale the engine condition. In order to perform these experiments, researchers elect to match the freestream Reynolds number to that of the engine. When scaling to engine temperatures, however, coolant and freestream fluid properties both change nonlinearly. Therefore the ratio of these properties does not remain constant as the temperature changes. …

Design And Flight Test Of A Weapons-Cavity Acoustics And Separation Test Bed, Zachary Probst

Theses and Dissertations

Two very important, and often detrimental, phenomena can occur when an open weapons bay, or more generally-a cavity, is exposed to high-velocity flow. First, a shear layer develops over the cavity, leading to large regions of difficult-to-predict flow. Second, dynamic pressure oscillations are generated within the cavity itself. These two issues can combine to have multiple harmful effects on weapons carriage and employment. This provided motivation for flight tests which quantify forces and moments on a store, mounted at various positions in the cavity, for a variety of flight conditions. Specifically, a low-cost, easily reconfigurable test bed for weapons-cavity research …

Vibrational Analysis Of A 12u Chassis, Daniel G. Miller

Theses and Dissertations

The objective of this research is to characterize how the natural frequencies of AFIT’s CubeSat design can be controlled to meet launch vehicle requirements while increasing the internal and external volume available for payload and bus components as the chassis increases in size. A reliable Finite Element (FE) model is created and validated using NASA’s General Environmental Verification Standards (GEVS) vibrational test on the 12U chassis. The validated FE model proves that current boundary conditions and geometric properties with minimized chassis wall thicknesses to maximize usable internal and external volume maintain a first frequency of the fully loaded 12U chassis …

Analysis Of A Near Real-Time Optimal Attitude Control For Satellite Simulators, Ryan M. Patrick

Theses and Dissertations

Dynamic optimization of spacecraft attitude reorientation maneuvers can result in significant savings in attitude determination and control system size, mass, and power. Optimal control theory is generally applied using an open loop trajectory which is vulnerable to disturbances. A closed loop implementation of optimal control has been difficult to achieve due to the computational requirements needed to quickly compute solutions to the optimal control problem. This research focuses on evaluating a near real-time optimal control (RTOC) system for large angle slew maneuvers on the Air Force Institute of Technology's spacecraft simulator called SimSat. A near RTOC algorithm computes optimal control …