Aerospace Engineering Commons^™

Stability Limits Of Uncertain Systems In The Presence Of Unmatched Coupled Dynamics And Actuator Dynamics With Adaptive Architectures, Bronson Saulo

Doctoral Dissertations and Master's Theses

Uncertain systems with coupled dynamics and actuator dynamics are prevalent in various applications spanning private, commercial, and government sectors. While stabilization and command tracking strategies exist, they often rely on idealized assumptions, such as negligible actuator bandwidth limitations and matched coupled dynamics. In order to mitigate actuator-induced limitations, we first employ standard model reference adaptive control (MRAC) architectures. We then proposed two architectures: modified hedging reference modeled based MRAC and modified expanded reference model based MRAC. In order to deal with coupled dynamics, we used an observer design to estimate the states of unmatched coupled dynamics. In addition, Lyapunov stability …

Experimental Investigation Of Heat Transfer To Tightly Packed Cylinder Arrays, Cameron M. Sexsmith

Doctoral Dissertations and Master's Theses

With the increased emphasis on the development of hybrid electric aircraft and other electric driven vehicles, the thermal demand on batteries is increasing. Unique to the aviation sector is the combined need of high battery thermal loads and a light-weight thermal management system. A proposed configuration is an array of batteries directly cooled with a dielectric coolant. The knowledge of heat transfer characteristics of battery cooling is becoming an ever pressing issue due to the need to optimize volume and mass in a safe manner. Tighter spacings between batteries provide higher pack densities, however, at the cost of increased cooling …

Dual Quaternions For Gravity Recovery Missions, Ryan Kinzie

Doctoral Dissertations and Master's Theses

A dual quaternion-based modeling, state estimation and control approach is introduced as a better alternative to the traditional methods which are currently utilized for gravity recovery missions. The proposed modeling and control approach was verified against and compared to the tangent bundle to Special Euclidean Group 3 through MATLAB simulations. The dual quaternion-based approach shows superior performance over traditional linearized and uncoupled methodologies, in both modeling accuracy of spacecraft translational position, and the ability to control the pose of a test mass relative to its host spacecraft. Utilizing data products from the Gravity Recovery and Climate Experiment Follow-On mission, a …

Exploring A Novel Adaptive Mesh Refinement Strategy For High-Speed Cfd, Arjun Jaishankar Vedam

Doctoral Dissertations and Master's Theses

Adaptive Mesh Refinement (AMR) techniques to efficiently and robustly achieve grid independent solutions on multi-element unstructured grids is a topic of practical interest within the CFD community.

The current effort focuses on the efficiency of a novel Adaptive Mesh Refinement (AMR) strategy that is developed and evaluated for transonic high-speed flows using Ansys Fluent. The algorithm for marking cells for adaptation is designed to systematically reduce local truncation errors based on the curvature of the primitive vector field. The algorithm for marking cells for adaptation is described in sufficient detail to be portable to other flow solvers that offer AMR. …

Modeling The Dynamics Of Flexible Aerospace Vehicles Using The Theory Of Functional Connections, Carlo Lombardi

Doctoral Dissertations and Master's Theses

Modeling and control of flexible vehicles is a topic of high interest in the aerospace field and a key challenge lies in finding accurate mathematical representations of the flexible dynamics of continuous elastic structures that allow simple integration into estimation and control algorithms. The answer was found in approximating the dynamics of these systems with sets of coupled Ordinary Differential Equations (ODE) for which a well-established estimation and control theory is available. Each of the techniques employed to achieve this goal is characterized by its own strengths and limitations. Hence, the main objective of this research is to develop the …

Robust Spacecraft Autonomy For Deep Space Exploration In Special Euclidean Group Se(3), Matthew Wittal

Doctoral Dissertations and Master's Theses

Over the past half-century, humanity has gained extensive experience conducting manned spaceflight near Earth. Arguably, "near Earth" could even include the Moon — the most distant destination humans have reached. However, "near" in this work primarily refers low Earth orbit (LEO). One could argue that we have not truly left Earth since the Apollo, as spacecraft in some LEOs remain subject to atmospheric drag thus emphasizing their continued connection to Earth's immediate environment. Reflecting on this, it becomes clear that humanity has largely remained bound to Earth’s immediate vicinity since the Apollo missions reached the Moon. However, that is set …

Discrete Particle Dynamics Models: Computational Aspects And Applications, Yuxuan Wu

Doctoral Dissertations and Master's Theses

Particle dynamics considers discrete particles as Newtonian point masses in diverse domains such as, pedestrian particles in pedestrian movement modeling and molecules in material science modeling. These dynamic modeling approaches share a commonality in computational approach where a series of ordinary differential equations are solved for the particle’s motion and equilibrium under active interactions and boundary conditions. In general, particle dynamics approaches are computationally intensive and address problems that require a vast parameter design space. In this dissertation, a computational paradigm is developed for large-scale particle dynamics modeling and demonstrated by three process design applications, (a) infection risk modeling for …

Performance Evaluation Of Routing Protocols And Ml-Based Enhancements For Uav-Assisted Post-Disaster Communication Networks, Prachi Choudhary

Doctoral Dissertations and Master's Theses

During natural disasters, the existing communication systems collapse, and the disaster-affected areas become disconnected without any means of exchanging information. The collapse of existing communication networks poses challenges for First-Responders (FRs) in locating survivors during Search and Rescue (SAR) operations and for survivors to communicate for emergency aid. To alleviate post-disaster consequences and save lives, Uncrewed Air Vehicles (UAVs), commonly known as drones, can be employed to establish adaptable and reliable emergency communication networks. UAVs offer portability and rapid deployment, making them effective in crises. This thesis presents two main contributions: 1) Evaluation and Comparison of Routing Protocol Performance: The …

Data Intensive Method For Processing Defect Detection And Mitigation For Composites, Deepak Kumar

Doctoral Dissertations and Master's Theses

Composite manufacturing without processing defects is a crucial step in satisfying the production, performance, and quality requirements of composite materials in various industries. Autoclave processing enables manufacturing of high-quality composite parts with excellent mechanical properties, whereas additive manufacturing (AM) offers adaptability to complex designs and streamlined processes. However, each method presents unique challenges; despite the benefits, autoclave processes can still result in processing defects, and AM is particularly susceptible to processing anomalies owing to the novelty of the process. Ensuring the quality and reliability of composite manufacturing is essential to fully capitalize on the advantages offered by both techniques. Artificial …

Heat Transfer In Tightly Packed Cylinder Arrays, Martin Kovachev

Doctoral Dissertations and Master's Theses

Cylindrical arrays with a cross flow are commonly used for heat transfer augmentation within an internal channel. In most applications, the cylinders have a spacing of over 2 diameters (2D) between their center points in both the lateral and downstream directions. One option for battery thermal management in hybrid/electric aviation is to use cylindrical batteries packed in arrays with an applied cross flow. In the context of aviation, it is important to maximize space and weight savings. Tightly packing these cylinder arrays with a spacing of under 2D in both directions would save on both of these yet have not …

A Low-Complexity Algorithm For Trajectory Generation In The Three-Body Problem, Brian P. Baker-Mcevilly

Doctoral Dissertations and Master's Theses

The Cislunar realm holds intrinsic value for scientific, commercial, and military applications as numerous entities have begun to invest resources into the expansion and utilization of the region. As the Cislunar region continues to grow, there is an escalating need for efficient methods of trajectory generation in this multi-body dynamical system for computationally limited systems. Thus, a low-complexity classical algorithm is proposed to achieve accurate orbital trajectories in the three-body problem. The proposed algorithm solves a polynomial interpolation problem, formulated using state measurements, through the unique decomposition of a dense system into sparse matrices. Several relevant Cislunar trajectories are simulated …

Physics-Informed Deep Learning For Pilot Parameter Estimation And Pilot-Induced Oscillation Characterization, Stephen A. Brutch

Doctoral Dissertations and Master's Theses

This thesis investigates the issue of loss-of-control in flight which is a driving contributor to fatal aviation accidents. The two main contributors tackled in this research are human pilot error and categories of pilot-induced-oscillations. The primary objective is to develop models that can capture the mathematical parameters that relate to human pilot control under the widely used McRuer Mathematical pilot model. The goal is that if the mathematical parameters that relate to human pilot control can be monitored during flight then the pilot’s input to the control system and pilot-induced-oscillations (PIO) can be monitored during flight to avoid loss-of-control. This …

Assessing General Propulsion Architectures For Fast Transit Times To Mars For Crewed Missions, Vivek Bhatt

Doctoral Dissertations and Master's Theses

As NASA and commercial contractors, such as SpaceX, continue to develop their programs with Artemis and Starship, respectively, it is becoming more and more apparent that the program developments are ultimately for finding a way to put humans onto Mars. However, when we approach the current timeline of going to Mars, it usually involves a 6-9 month one way trip. Due to this, human spaceflight to Mars becomes more dangerous as exposure to affects such as solar radiation, long exposure to low gravity fields, and isolation. These are some of the many hazards that come with interplanetary space travel for …

In-Situ Characterization And Machine Learning Applications For Composite Processing, Pragathi Agraharam Chan

Doctoral Dissertations and Master's Theses

Numerous aircraft and spacecrafts utilize carbon fiber-reinforced polymer structures to significantly enhance their operational efficiency and overall performance. Autoclave composite processing offers a solution for the intricate design of complex structures. However, the rapid temperature and strain fluctuations experienced during the processing gives rise to a multitude of defects and residual stresses in the composite. In this study, we have devised an in-situ methodology that leverages Digital Image Correlation (DIC) and Machine Learning Applications to effectively observe and track defect deformations occurring throughout the process. This process presents a dataset derived from the curing process of 40 carbon fiber-reinforced polymer …

Ridds: Removal Of Irregular Debris Using Double Nets, Kayann Coote

Doctoral Dissertations and Master's Theses

The quantity of debris in Earth’s orbit is increasing at an alarming rate, and without a sustainable solution, this will detriment the space environment, impacting the future of space travel and space traffic management. While numerous debris removal concepts and designs have been proposed, very few have made it to actual flight tests, and none can remove debris at a fast enough rate to stop debris growth. For debris currently in orbit, most proposed systems are costly on a large scale and cannot adapt to the wide variety of debris shape and geometry and tumbling. The purpose of the proposed …

Model Predictive Control For Autonomous Landing In Complex Scenarios, Konstantinos Sotirakos

Doctoral Dissertations and Master's Theses

The autonomous flight industry is ever-expanding and continuing to push the boundaries of what is possible within the limitations of technology. Multiple companies are exploring the use of autonomous flight for intra-city travel with air taxi services and package delivery vehicles. Other companies are exploring the use of autonomous vehicles for military applications, such as Sikorsky with a next generation Black Hawk helicopter to ensure the safety of soldiers in high threat or altogether dangerous scenarios. In this thesis model predictive control (MPC) algorithms are developed to enable a quadcopter to operate and land autonomously in challenging environments. Specifically, MPC …

Dynamic Estimation Of Large-Scale Flow Events In Open Cavity Flows, Alexandre Mota

Doctoral Dissertations and Master's Theses

Flow over an open cavity has a dynamically complex flowfield, generating pressure fluctuations that can amplify shear stress and cause structural damage to the stores within it and the aircraft as a whole. These pressure loads are linked to large-scale resonant shear layer phenomena. Consequently, it is crucial to establish this link by characterizing the large-scale flow events conditional upon pressure measurements to improve the prediction and control of the detrimental pressure fluctuations. In this study, a link between the pressure measurements (to control) and large-scale shear layer events (to actuate) will be established using a combination of two data-driven …

Adaptive Control And Estimation Of The Center Of Mass Of A 5-Degree-Of-Freedom Spacecraft Testbed, Pol Fontdegloria Balaguer

Doctoral Dissertations and Master's Theses

In space applications, on-ground experimentation is an essential step in control algorithm validation before real mission application. However, on-ground conditions greatly differ from space ones, where satellites operate under extremely low gravity and friction conditions. A common way to simulate these conditions is with air-bearing-based testbeds. These testbeds reduce friction significantly to almost space-like conditions. Air-bearing technology can provide virtually frictionless translational and rotational motion. However, when frictionless rotational motion is achieved, the testbed becomes highly sensible gravity torque. This external torque is produced by the offset between the predetermined geometrical center of rotation (CoR) and the center …

Contributions To The Understanding Of Turbulent Boundary Layers Over Curved Walls, Nicholas Zhu

Doctoral Dissertations and Master's Theses

A wind tunnel campaign was conducted to investigate the DARPA Suboff boundary layer. To emphasize the axisymmetric boundary layer, the generic submarine model's sail, appendages, and propeller were omitted. The study focused on the afterbody from 70–95% of the model length to examine the concurrent pressure gradient and wall curvature effects, which are commonplace in engineering. Three particle image velocimetry (PIV) configurations were employed to measure the boundary layer in detail: one spanned the entire afterbody, another had narrow strips sampled at 16 kHz, and the third used two simultaneous orthogonal measurement planes. Considerable effort was made to reduce the …

Heat Transfer To Arrays Of Oscillating Impingement Jets, Alex Q. Clay

Doctoral Dissertations and Master's Theses

In gas turbine engines, the desire to increase turbine entry temperatures has become more relevant in order to increase engine efficiency. However, materials used in these engines can only withstand temperatures that are so high. Because of this, the ability to cool hot section components will always limit operating temperatures. Impingement cooling jets have become a common way of cooling due to the high rates of heat transfer that can be achieved. However, previous research has shown that the interaction of impingement jets with cylinder wake can improve the intensity and uniformity of heat transfer. The goal of this study …

Bi-Modal Excitation Of A Supersonic Rectangular Jet, Benjamin Malczewski

Doctoral Dissertations and Master's Theses

This work addresses the issue of supersonic rectangular jet noise via bi-modal excitation. A Mach 1.5 heated rectangular jet with a 2:1 aspect ratio is considered. Theoretical work is presented in which a Reduced-Order Model (ROM) is used in conjunction with the Linearized Euler Equations to predict the nonlinear growth and decay of various frequencies due to the interaction between harmonically related modes and the mean flow. Scope is limited to a symmetric disturbance. The case of no interaction is used to help identify a dominant coherent structure, referred to as “f”. For the symmetric disturbance, a Strouhal number of …

Space Radiation Assessment And Mitigation: Meeting The Growing Demand For Shielding Solutions By Enhancing Models And Exploring Novel Shielding Opportunities, M. Laura Sorgi Johann

Doctoral Dissertations and Master's Theses

The rapid growth of satellite technology and the increasing presence of vulnerable technology and human life in space have highlighted the need for improved shielding materials. Industry standard protocols for shielding are being pushed to their limits as we gain a deeper understanding of the harsh space environment and as chip sizes approach the scale of radiation wavelengths. Furthermore, the commercialization of space is attracting interest from industries such as pharmaceuticals and semiconductor crystal growing, as they explore the potential benefits of zero-gravity production environments. However, the eagerness to develop lighter shielding and the lack of consideration for existing tools …

Optimization Of A Plate Beam System For Energy Harvesting Using A Piezoelectric Material, Jose Manuel Almendros Espantaleon

Doctoral Dissertations and Master's Theses

With a continuously growing demand for power, driven by the need to reduce our environmental footprint, this research provides an examination of the potential of energy harvesting with smart materials technology and its practical applications. The energy harvesting system considered here works on generating energy through vibrations of a piezoelectric material beam which will undergo sustained vibrations due to flow of air over its surface. It is assumed that sustained limit cycle oscillations of this system will occur at the flutter velocity. This research creates an optimization framework to obtain the best values of parameters that will result in the …

Assessing The Impact Of Spacecraft Fragmentation In The Cislunar Region, Marta Lopez Castro

Doctoral Dissertations and Master's Theses

In the last decades, space missions have followed great advancements due to technological improvements and the extensive research developed in the field. Some of these missions are increasingly focusing on satellites orbiting the Moon. The Cislunar region is known to have a higher non-linear chaotic component in the dynamics compared to the low-Earth environment. This research is focused on studying the impact that a satellite explosion has in the Cislunar vicinity. The study is conducted for different periodic orbits that are key destinations for Cislunar traffic. By varying the initial conditions, simulations of explosions at different locations of the orbits …

Additively Manufactured Flexible Piezoelectric Wave-Based Multifunctional Sensor, Rishikesh Srinivasaraghavan Govindarajan

Doctoral Dissertations and Master's Theses

The demand for acoustic wave-based sensors has rapidly increased in the aerospace, chemical, gas, and biological fields due to their versatility in sensing measurands. This study aims to develop a flexible piezoelectric sensor exhibiting enhanced piezoelectric properties using additive manufacturing techniques that can detect mechanical strains and gas or volatile organic compounds (VOCs) by incorporating functional material into the sensing layer. This research explores piezoelectric substrate fabrication through diverse additive manufacturing techniques, including new material development made of polymer/nano-fillers with electrodes that are filled using different printing techniques. Notably, the design of the interdigital transducer (IDT) in the piezoelectric sensor …

Sliding Mode Control With Chattering Reduction, Suryamshu Ramesh

Doctoral Dissertations and Master's Theses

Sliding Mode Control is a powerful nonlinear control methodology that can handle parametric uncertainties and external disturbances. However, the discontinuous and high-frequency switching nature of the control law introduces the chattering phenomenon, which leads to potential actuator degradation, alterations to the desired response characteristics and, sometimes, instability during control implementation. The main objective of this thesis is to study Sliding Mode Control with chattering reduction. The Sliding Mode Control law involves an equivalent control component and a discontinuous control component. A disturbance estimation is performed based on Lyapunov analysis and adaptive control techniques and then included in the control law …

Analysis Of Wingtip Vortex Structure Generated By Bio-Inspired Winglets, D'Zahn A. Smith

Doctoral Dissertations and Master's Theses

Bio-inspired winglets were studied with the goal of better understanding the structure of the wingtip vortices they generate. Measurements of the tip vortex were previously carried out using stereoscopic particle image velocimetry (sPIV). The bio-inspired winglet was tested on a rectangular NACA 0012 wing section at a 5-degree angle of attack and at a chord Reynolds number of 900,000. Velocity field measurements were recorded at 0.7 and 2 chord lengths aft of the wing’s trailing edge. Compared to the wing with no attachment and a traditional blended winglet, the bio-inspired winglet’s vortex exhibited significantly less intense flow field properties. These …

Characterization And Analysis Of Supersonic Flow Through De Laval Nozzles At Varied Design Conditions, Sarah Baird

Doctoral Dissertations and Master's Theses

A combined numerical and experimental investigation of supersonic planar nozzles under different design conditions has been conducted. Supersonic planar nozzles are common geometries observed in supersonic wind tunnels and aircraft or rocket engines. For the important role they play in wind tunnel testing and aircraft propulsion, it is important to conduct a thorough numerical and experimental study to characterize their performance at different operating conditions. In this study, a de Laval nozzle was scanned to extract its contours and subsequently modeled to compare analytical and numerical performance expectations under design and off-design conditions. The nozzle was then installed in a …

Modeling Of Rotor Wake Vortex Dynamics And Interactions In Non-Homogenous Vertiport Environments, Garrison P. Shaw

Doctoral Dissertations and Master's Theses

The current research serves to analyze and study the effects ground forces can have on the thrust performance of a propeller in multiple different configurations. The current research utilizes an open source Computational Fluid Dynamics (CFD) software known as OpenFOAM to generate calculate and visualize these runs. The model used for this experiment is a hybrid model that employs both a Unsteady Reynolds-Averaged Navier-Stokes (URANS) and a detached eddy simulation using a hybrid Large Eddy Simulation (LES) via a KomegaSSTDDES model. This model serves to save computational time as well as allow for accurate results. The three cases run are …

Machine Learning-Based Gps Jamming And Spoofing Detection, Alberto Squatrito

Doctoral Dissertations and Master's Theses

The increasing reliance on Global Positioning System (GPS) technology across various sectors has exposed vulnerabilities to malicious attacks, particularly GPS jamming and spoofing. This thesis presents an analysis into detection and mitigation strategies for enhancing the resilience of GPS receivers against jamming and spoofing attacks. The research entails the development of a simulated GPS signal and a receiver model to accurately decode and extract information from simulated GPS signals. The study implements the generation of jammed and spoofed signals to emulate potential threats faced by GPS receivers in practical settings. The core innovation lies in the integration of machine learning …