Aerospace Engineering Commons^™

Energy Storage Can Increase The Value And Flexibility Of A Nuclear Power Plant But Makes Plant Economics More Subject To Uncertainty In Electricity Price, Jacob Bryan

Student Research Symposium

Regional electricity markets currently rely heavily on coal and natural gas resources to meet electricity demand. Intermittent renewable resources like wind and solar power are location-dependent and are not dispatchable resources. Flexible nuclear power, achieved through the use of integrated thermal energy storage, may be able to complement these renewable resources to provide clean, predictable power in an evolving electricity grid. This study considers such a flexible nuclear plant and seeks to address a fundamental modeling question: which uncertain model inputs have a significant effect on the economics of the system, and to what degree? These questions are addressed by …

Molecular Dynamics Simulations Of Liquid Crystal Elastomers, Nanang Mahardika

Student Research Symposium

Molecular Dynamics Simulations of Liquid Crystal Elastomers

Microscale Modelling Of Lightning Damage In Fibre-Reinforced Composites, Scott L. J. Millen, Juhyeong Lee

Mechanical and Aerospace Engineering Faculty Publications

In this work, three-dimensional (3D) finite element simulations were undertaken to study the effects of lightning strikes on the microscale behaviour of continuous fibre-reinforced composite materials and to predict and understand complex lightning damage mechanisms. This approach is different from the conventional mesoscale or macroscale level of analysis, that predicts the overall lightning damage in composite laminates, thus providing better understanding of lightning-induced thermo-mechanical damage at a fundamental level. Micromechanical representative volume element (RVE) models of a UD composite laminate were created with circular carbon fibres randomly distributed in an epoxy matrix. The effects of various grounding conditions (one-, two-, …

Sensitivity Of Optimal Midcourse Correction Scheduling For Robust Cislunar Trajectory Design, David Geller, David Woffinden, Stefan Bieniawski

Space Dynamics Laboratory Publications

A new approach to optimal trajectory design is the determination of optimal trajectories that are robust to initial trajectory dispersions, navigation errors, maneuver execution errors, and environment modeling errors. This paper investigates the sensitivity of cislunar robust optimal trajectory design to launch date, duration of navigation measurement passes, and navigation measurement frequency. For a given cislunar trajectory from translunar injection (TLI) to lunar orbit insertion (LOI), the optimal locations of midcourse corrections, also known as trajectory correction maneuvers (TCM) are determined by minimizing the final 3-σ ∆v subject to a final 3-σ position dispersion constraint for a …

Developing Test Methods For Compression After Lightning Strikes, Xiaodong Xu, Scott L. J. Millen, Juhyeong Lee, Gasser Abdelal, Daniel Mitchard, Michael R. Wisnom, Adrian Murphy

Mechanical and Aerospace Engineering Faculty Publications

Research into residual strength after lightning strike is increasing within the literature. However, standard test methods for measuring residual compressive strength after lightning strikes do not exist. For the first time, a systematic experimental study is undertaken to evaluate modifications necessary to standard Compression After Impact (CAI) specimen geometry and test jig design to induce specimen failure at the lightning damage region. Four laboratory generated lightning strike currents with peak amplitudes ranging from 25 to 100 kA have been studied. Test set-up modifications were made considering the scale of the lightning damage and its potential proximity to specimen edges. Specimen …

An Alternate Dimensionless Form Of The Linearized Rigid-Body Aircraft Equations Of Motion With Emphasis On Dynamic Parameters, Douglas F. Hunsaker, Benjamin C. Moulton

Mechanical and Aerospace Engineering Student Publications and Presentations

The equations of motion for an aircraft can be linearized about a reference condition within the assumptions of small disturbances and linear aerodynamics. The resulting system of equations is typically solved to obtain the eigenvalues and eigenvectors that describe the small disturbance motion of the aircraft. Results from such an analysis are often used to predict the rigid-body dynamic modes of the aircraft and associated handling qualities. This process is typically carried out in dimensional form in most text books, or in nondimensional form using dimensionless parameters rooted in aerodynamic theory. Here we apply Buckingham’s Pi theorem to obtain nondimensional …

Advances In Thermal Technologies Using Pyrolytic Graphite Sheet, Matt Ralphs, Matt Sinfield, Holly Mortensen, Matt Felt

Space Dynamics Laboratory Publications

Pyrolytic Graphite Sheets (PGS) have increased the achievable mass specific conductance of many critical, passive thermal technologies over the last several years. From thermal straps and cryocooler brackets to PGS-embedded conductor bars and honeycomb radiators, PGS is the answer to dissipating the ever-increasing heat loads in today’s cutting-edge spacecraft. This work outlines the advances in PGS thermal straps, PGS-embedded cryocooler brackets, PGS-embedded conductor bars, and PGS-embedded radiators (both machined and honeycomb) at Space Dynamics Laboratory (SDL). The capabilities of each PGS technology are compared to traditional thermal solutions (e.g., metallic thermal straps, conductor bars, and cryocooler brackets and heat pipe …

Simplified Mass And Inertial Estimates For Aircraft With Components Of Constant Density, Benjamin C. Moulton, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

Aircraft mass and inertial properties are required for predicting the dynamics and handling qualities of aircraft. However, such properties can be difficult to estimate since these depend on the external shape and internal structure, systems, and mass distributions within the airframe. Mass and inertial properties of aircraft are often predicted using computer-aided design software, or measured using various experimental techniques. The present paper presents a method for quickly predicting the mass and inertial properties of complete aircraft consisting of components of constant density. Although the assumption of constant density may appear limiting, the method presented in this paper can be …

Optimal Spacecraft Guidance, Matthew W. Harris, M. Benjamin Rose

Mechanical and Aerospace Engineering Faculty Publications

This book is designed for a one-semester course at Utah State University titled MAE 6570 Optimal Spacecraft Guidance. The class meets for 75 minutes, twice per week, for 14 weeks. There are no prerequisites other than graduate standing in engineering. Proficiency in calculus, differential equations, linear algebra, and computer programming is required. Students find that previous experience in space dynamics, linear multivariable control, or optimal control is helpful.

The goal of the book and course is for students to develop fundamental skills needed to do professional work in the area of spacecraft guidance. After working through the book, students should …

Lifting-Line Predictions For Life And Twist Distributions To Minimize Induced Drag In Ground Effect, Kyler Church

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The elliptic lift distribution produces the minimum induced drag for a given wingspan and desired lift outside of ground effect. This distribution can be generated on any wing by using geometric and/or aerodynamic twist. However, in ground effect, the elliptic lift distribution is not necessarily that which minimizes induced drag. The present work uses a modern numerical lifting-line algorithm to evaluate how the optimum lift distribution varies as a function of height above ground. The algorithm is also used to obtain the twist distributions that should be applied to wings of varying aspect ratios and taper ratios to produce the …

A Theoretical Trade-Off Between Wave Drag And Sonic Boom Loudness Due To Equivalent Area Changes On A Supersonic Body, Nolan L. Dixon

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The NASA University Leadership Initiative (ULI) titled ”Adaptive Aerostructures for Revolutionary Civil Supersonic Transportation” consists of a team of university and industry partners studying the feasibility of reducing the perceived loudness of the sonic boom by introducing an adaptive geometry at localized regions of an aircraft’s outer-mold line. The Utah State University AeroLab is a member of this ULI team and has produced low-fidelity tools to predict the aerodynamic and boom loudness effects from localized changes to the geometry.

Such changes to the geometry affect both the sonic boom loudness and wave drag; however, the precise relationship between boom loudness …

Study Into The Sensitity Of The G-H Method To Blending Distance, Cory Goates, Doug Hunsaker

Browse all Datasets

A numerical lifting-line method (implemented in an open-source software package) is presented which can accurately estimate the aerodynamics of wings with arbitrary sweep, dihedral, and twist. Previous numerical lifting-line methods have suffered from grid convergence challenges and limitations in accurately modeling the effects of sweep, or have relied on empirical relations for swept-wing parameters and have been limited in their application to typical wing geometries. This work presents novel improvements in accuracy, flexibility, and speed for complex geometries over previous methods. In the current work, thin-airfoil theory is used to correct section lift coefficients for sweep, providing a more general …

Multiple Discharges Before Leader Inception In Long Air Gaps Under Positive Switching Impulses, Xiangen Zhao, Juhyeong Lee, Gang Liu, Lei Jia, Yang Liu, Junjia He, Yaping Du

Mechanical and Aerospace Engineering Faculty Publications

There are multiple corona bursts before leader inception when the rising rate of the applied voltage or electric field is not sufficiently high enough in long positive sparks. In existing studies, no attention has been paid to whether these corona bursts occur in the same location, and they are mostly considered directly as belonging to the same discharge. However, this paper presents that in a typical rod-plate long air gap, the multiple corona bursts before leader inception are distributed in at least two different locations, and the highest probability of three discharges occurs. Also, the discharge occurs with the highest …

Pace Oci Short-Wave Infrared Detection Assembly Frequency-Dependent Linearity Characterization And Uncertainty Analysis, Kenneth J. Squire, Jacob Hedelius, David K. Moser, James Q. Peterson, Eric T. Gorman, Emily Kan, D. Brent Mott, Ulrik B. Gliese, Gerhard Meister

Space Dynamics Laboratory Publications

The Ocean Color Instrument (OCI), the primary payload of the Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) observatory, will collect data to monitor the health of Earth’s oceans and atmosphere. The Short-Wave Infrared (SWIR) Detection Assembly (SDA) was built and characterized by the Utah State University Space Dynamics Laboratory (SDL) and is a subsystem of OCI. The SDA measures seven bands centered at 940, 1038, 1250, 1378, 1615, 2130, and 2260 nm, with standard- and high-gain varieties for the 1250 and 1615 nm bands, resulting in nine total detection configurations in the SWIR. The delivery of high-quality science data is critically …

Infrared Spectral Responses Of The Ocean Color Instrument (Oci) Pre-Assembly And Integration, Jacob K. Hedelius, Kenneth J. Squire, James Q. Peterson, Branimir Blagojević, Ulrik B. Gliese, Eric T. Gorman, David K. Moser, Zakk Rhodes, Pedro Sevilla, Gerhard Meister

Space Dynamics Laboratory Publications

Spectral characterizations were made of the Ocean Color Instrument (OCI) short-wave infrared (SWIR) Detection Subassembly (SDS) responses (940–2260 nm) prior to their integration. Using modulated output light from a Fourier transform spectrometer, the in-band relative spectral responses of the nine different configurations of SDSs were found along with out-of-band (OOB) sensitivity. From these spectral responses, the center wavelengths (λ₀), full widths at half of the maximum, full widths at 1% of the maximum, and OOB rejection ratios were determined. All spectral parameters are within requirements. There are 2–8 repeats of each configuration, and the 1 σ spread among …

Design Of Composite Double-Slab Radar Absorbing Structures Using Forward, Inverse, And Tandem Neural Networks, Devin Nielsen, Juhyeong Lee, Young-Woo Nam

Mechanical and Aerospace Engineering Faculty Publications

The survivability and mission of a military aircraft is often designed with minimum radar cross section (RCS) to ensure its long-term operation and maintainability. To reduce aircraft’s RCS, a specially formulated Radar Absorbing Structures (RAS) is primarily applied to its external skins. A Ni-coated glass/epoxy composite is a recent RAS material system designed for decreasing the RCS for the X-band (8.2 – 12.4 GHz), while maintaining efficient and reliable structural performance to function as the skin of an aircraft. Experimentally measured and computationally predicted radar responses (i.e., return loss responses in specific frequency ranges) of multi-layered RASs are expensive and …

Hyper-Velocity Impact Performance Of Foldcore Sandwich Composites, Nathan Hoch, Chase Mortensen, Juhyeong Lee, Khari Harrison, Kalyan Raj Kota, Thomas Lacy

Mechanical and Aerospace Engineering Faculty Publications

A foldcore is a novel core made from a flat sheet of any material folded into a desired pattern. A foldcore sandwich composite (FSC) provides highly tailorable structural performance over conventional sandwich composites made with honeycomb or synthetic polymer foam cores. Foldcore design can be optimized to accommodate complex shapes and unit cell geometries suitable for protective shielding structures

This work aims to characterize hypervelocity impact (> 2000 m/s, HVI) response and corresponding damage morphologies of carbon fiber reinforced polymer (CFRP) FSCs. A series of normal (0° impact angle) and oblique (45° impact angle) HVI (~3km/s nominal projectile velocity) impact …

Predicting Stochastic Lightning Mechanical Damage Effects On Carbon Fiber Reinforced Polymer Matrix Composites, Juhyeong Lee, Syed Zulfiqar Hussain Shah

Mechanical and Aerospace Engineering Faculty Publications

Three stochastic air blast models are developed with spatially varying elastic properties and failure strengths for predicting lightning mechanical damage to AS4/3506 carbon/epoxy composites subjected to < 100 kA peak currents: (1) the conventional weapon effects program (CWP) model, (2) the coupled eulerianlagrangian (CEL) model, and (3) the smoothed-particle hydrodynamics (SPH) model. This work is an extension of our previous studies [1–4] that used deterministic air blast models for lightning mechanical damage prediction. Stochastic variations in composite material properties were generated using the Box-Muller transformation algorithm with the mean (i.e., room temperature experimental data) and their standard deviations (i.e., 10% of the mean herein as reference). The predicted dynamic responses and corresponding damage initiation prediction for composites under equivalent air blast loading were comparable for the deterministic and stochastic models. Overall, the domains with displacement, von-Mises stress, and damage initiation contours predicted in the stochastic models were somewhat sporadic and asymmetric along the fiber’s local orientation and varied intermittently. This suggests the significance of local property variations in lightning mechanical damage prediction. Thus, stochastic air blast models may provide a more accurate lightning mechanical damage approximation than traditional (deterministic) air blast models. All stochastic models proposed in this work demonstrated satisfactory accuracy compared to the baseline models, but required substantial computational time due to the random material model generation/assignment process, which needs to be optimized in future work.

A Network Flow Approach For Constellation Planning, Skylar A. Cox, Greg N. Droge, John H. Humble, Konnor D. Andrews

Space Dynamics Laboratory Publications

A graph-based network flow approach to constellation planning is presented that respects spacecraft resources and mission constraints to arrive at a preliminary operational schedule. The method discretizes task fulfillment opportunity windows into graph nodes and then adds edges based on feasibility of transition between these opportunities, either by slew maneuvers or extended-time task fulfillment during downlink operations. Intelligent graph pruning is applied to improve computation performance and provide a versatile planning capability with a minimal impact on the resulting solution. A network flow formulation allows for a simultaneous search for spacecraft plans using a Mixed Integer Linear Program (MILP). The …

Mission Operations, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Overview

• In review – CONOPS

• Mission Planning

• Anomaly Resolution

• Miscellaneous, but important considerations

• Looking forward

Collaborative Research: Harnessing Mechanics For The Design Of All-Solid-State Lithium Batteries, Haoran Wang

Funded Research Records

No abstract provided.

Ground Support Equipment (Gse) Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

About this Presentation

• This presentation was developed as a “taste” of the area of GSE
• There are lots of resources that can be found about GSE and how it should be used
• While I have tried to cover a lot of ground in this presentation, the GSE required for your mission will vary depending on your application
• My intent is to start the thinking process of how to design, develop, and execute GSE elements of your program so that you have a successful mission

Spacecraft Formation Flying Control Switching Surface Based On Relative Orbital Elements, Tyson K. Smith, John Akagi, Greg Droge

Space Dynamics Laboratory Publications

The development of a switching surface constraint based on the D’Amico relative orbital elements (ROE) is presented in this paper. Relative orbital elements give a more intuitive understanding of how the relative motion of a cluster of satellites changes with time and allows the control algorithm to take advantage of the natural dynamic motion. This work models each vehicle using a model predictive control (MPC) approach, based on the Hill-Clohessey-Whiltshire (HCW) equations, to plan maneuvers which are simulated using a high-fidelity motion model. An ROE based convex polytope switching surface is added to the MPC formulation to force the states …

Control Mapping Methodology For Tailless Morphing-Wing Aircraft, Zachary S. Montgomery

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Advanced aircraft designs tend to have several control surfaces or devices that affect the flight of the aircraft. It is difficult or even impossible for a pilot to directly control each of these devices and fly the aircraft well. Therefore, a control mapping logic is needed to take typical pilot commands and map them to what the control devices should do to achieve the pilot’s commands. This work presents a methodology for determining this control mapping logic using two different approaches. The first uses a theoretical approach based on lifting-line theory, while the second leverages computational methods. The methodology consists …

Fabrication And Testing Of Catalyst-Infused Filament For 3d Printing Of Ignition-Augmented Hybrid Rocket Fuels, Kurt C. Olsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis describes and addresses the need for reliable ignition in small satellite hybrid propulsion systems using higher density oxidizers. It describes methods of creating custom 3D printing ABS plastic based filaments that contain small amounts of catalysts. These catalysts lead to a more reliable and energy-efficient ignition of a hybrid rocked propulsion system using catalyst-infused ABS and nitrous oxide and oxygen blend called Nytrox, commonly known as ”laughing gas.” The ”laughing gas” has a higher density and can therefore provide more ”miles per gallon” in a hybrid propulsion system on a small satellite when compared to gaseous oxygen (GOX). …

Ground Station Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Ground Components

Two primary subsystems

•Ground Station(s)

•  May be your own or commercial
• Includes radio(s), antenna(s), rotor, etc.
• Heavily intertwined with satellite communications system
• Influences link budget

•Ground data system

• Your command, control, and telemetry interface
• Operator facing tools
• Front end processor
• Includes computer(s), networking equipment, displays, software tools, etc.
• Directly links to your ground station via network

•Additional ground subsystems could include:

• Payload ground (i.e. optical ground terminal)
• Space comm networks (i.e. Iridium)

Schlieren Techniques For Observations Of Long Positive Sparks: Review And Application, Junjia He, Xiankang Wang, Xiangen Zhao, Juhyeong Lee, Yaping Du, Xiaopeng Liu, Quan Gan, Yang Liu, Yuqin Liao

Mechanical and Aerospace Engineering Faculty Publications

Understanding the mechanism of positive leader discharge is important in lightning protection engineering and the external insulation design in high voltage power transmission systems. During the propagation of a positive leader, some processes without light-emitting, for example, the insulation recovery process after the breakdown, cannot be observed by optical photography techniques. With the combination of the digital high-speed imaging system, the conventional Schlieren techniques offer new vistas in the long air gap discharge observation. The important features of high spatial resolution, high sensitivity, and easy arrangement make Schlieren techniques powerful and effective tools for characterising the discharge processes without light-emitting. …

A Study Of Wings With Constant And Variable Sweep For Aerodynamic Efficiency In Inviscid Flow, Bruno Moorthamers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Wing sweep has been studied by industry and academia since the pioneering days of aviation for both high-speed and low-speed applications. In transonic and supersonic flight regimes it serves to delay the onset of compressibility effects and decrease wave drag. In subsonic conditions, flying wing designs sweep back the main lifting surface in such a way that it can be used for longitudinal stability and control, to allow for the elimination of a traditional empenage. This is desirable because it can decrease the aerodynamic drag. Sweep can also be seen in nature in the wings of birds and fins of …

Optimal Relative Path Planning For Constrained Stochastic Space Systems, Nathan Bohus Stastny

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Rendezvous and proximity operations for automated spacecraft systems requires advanced path planning techniques that are capable of generating optimal paths. Real-world constraints, such as sensor noise and actuator errors, complicate the planning process. Operations also require flight safety considerations in order to prevent the spacecraft from potentially colliding with the associated companion spacecraft. This work proposes a new, ground-based trajectory planning approach that seeks an optimal trajectory while meeting all mission constraints and accounting for vehicle performance and safety requirements. This approach uses a closed-loop linear covariance simulation of the relative trajectory coupled with a genetic algorithm to determine fuel …

A Review Of Avian-Inspired Morphing For Uav Flight Control, Christina Harvey, Lawren L. Gamble, Christian R. Bolander, Douglas F. Hunsaker, James J. Joo, Daniel J. Inman

Mechanical and Aerospace Engineering Faculty Publications

The impressive maneuverability demonstrated by birds has so far eluded comparably sized uncrewed aerial vehicles (UAVs). Modern studies have shown that birds’ ability to change the shape of their wings and tail in flight, known as morphing, allows birds to actively control their longitudinal and lateral flight characteristics. These advances in our understanding of avian flight paired with advances in UAV manufacturing capabilities and applications has, in part, led to a growing field of researchers studying and developing avian-inspired morphing aircraft. Because avian-inspired morphing bridges at least two distinct fields (biology and engineering), it becomes challenging to compare and contrast …