Aerospace Engineering Commons^™

Numerical Characterization Of The Flow Field And Heat Transfer Inside The Receiver Of A Parabolic Trough Solar Collector Carrying Supercritical Co2, Samad Gharehdaghimollahajloo

UNLV Theses, Dissertations, Professional Papers, and Capstones

The aim of this research is to provide a detailed numerical analysis of flow field and heat transfer inside the heat collecting element of a parabolic trough collector. The parabolic trough collector is used as the boiler in a direct Super Critical Carbon Dioxide (S-CO2) Brayton cycle.

A single collector is modeled and analyzed with different inlet conditions. The working fluid is supercritical since its pressure is increased to above critical pressure in the compressor while its temperature reaches 300 °C after passing through the recuperators and before entering the solar field. For the first time, this research considers both …

Meshless Method For Simulation Of Compressible Flow, Ebrahim Nabizadeh Shahrebabak

UNLV Theses, Dissertations, Professional Papers, and Capstones

In the present age, rapid development in computing technology and high speed supercomputers has made numerical analysis and computational simulation more practical than ever before for large and complex cases. Numerical simulations have also become an essential means for analyzing the engineering problems and the cases that experimental analysis is not practical. There are so many sophisticated and accurate numerical schemes, which do these simulations. The finite difference method (FDM) has been used to solve differential equation systems for decades. Additional numerical methods based on finite volume and finite element techniques are widely used in solving problems with complex geometry. …

The Validation And Verification Of Les Modeling Using Kiva, David Fyda

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, the use of large-eddy simulation (LES) has grown into new research methods. LES is preferred when compared to Reynold’s Averaged Navier Stokes (RANS), which separates velocity components into steady and fluctuating components. While RANS is relatively easy to implement, it does not fully resolve the range of turbulence eddies and has limitations that make it inaccurate in many practical circumstances. Direct numerical simulation, DNS, fully resolves all turbulent eddies to the smallest grid scale, but requires an extremely fine grid. This makes it computationally impractical to use as the computational power required to solve even the simplest …

Adaptive, Neural And Robust Control Of Wing-Rock And Aeroelastic System, Prince Ghorawat

UNLV Theses, Dissertations, Professional Papers, and Capstones

Modern aircraft exhibit wing-rock phenomenon and aeroelastic instability. Wingrock (roll single degree of freedom motion) and aeroelastic systems' (two degrees of freedom) behavior are described by complex nonlinear differential equations. The nonlinearities in the dynamics of these systems give rise to limit cycle oscillations beyond critical speed of aircraft. The onset of wing-rock and aeroelastic instability limits the performance of aircraft and can even lead to catastrophic consequences. Therefore, control of wing-rock motion and stabilization of aeroelastic systems are important. In the past, several studies have been made and experimental and analytical results have been obtained to explain the wing-rock …

Mitigation Of Moving Shocks In An Expanding Duct, Veraun Chipman

UNLV Theses, Dissertations, Professional Papers, and Capstones

Inviscid flow theory governs the bulk motion of a gas at some distance away from the walls (i.e. outside the boundary layer). That is to say, there are no viscous forces in the bulk flow, which is modeled using the Euler equations. The Euler equations are simply the Navier-Stokes equations with zero viscosity terms. An ideal inviscid fluid, when brought into contact with a surface or wall, would naturally slip right past it since the fluid has no viscosity. In real life, however, a thin boundary layer forms between the wall or surface and the bulk flow. Shock wave boundary …

Mathematical Equations And System Identification Models For A Portable Pneumatic Bladder System Designed To Reduce Human Exposure To Whole Body Shock And Vibration, Ezzat Aziz Ayyad

UNLV Theses, Dissertations, Professional Papers, and Capstones

A mathematical representation is sought to model the behavior of a portable pneumatic foam bladder designed to mitigate the effects of human exposure to shock and whole body random vibration. Fluid Dynamics principles are used to derive the analytic differential equations used for the physical equations Model. Additionally, combination of Wiener and Hammerstein block oriented representation techniques have been selected to create system identification (SID) block oriented models. A number of algorithms have been iterated to obtain numerical solutions for the system of equations which was found to be coupled and non-linear, with no analytic closed form solution. The purpose …

Feedback Speed Control Of A Small Two-Stroke Internal Combustion Engine That Propels An Unmanned Aerial Vehicle, Paul D. Fjare

UNLV Theses, Dissertations, Professional Papers, and Capstones

Unmanned aerial vehicles (UAV) require intelligent control of their power source. Small UAV are typically powered by electric motors or small two-stroke internal combustion (IC) engines. Small IC engines allow for longer flight times but are more difficult to control and cause significant ground noise. A hybrid operation that uses the engine at high altitudes and the electric motors at low altitudes is desired. This would allow for extended flight with acceptable ground noise levels. Since the engine can not be restarted in the air it must be able to remain at idle for an extended time without stalling. A …

Supersonic Turbine Cascade Studies Using Computational Fluid Dynamics And Water Table Experiments, Shelby E. Nelson

Honors College Theses

Design engineers use a variety of tools to perform calculations and to aid in the design process. For example, engineers designing gas turbines, specifically the aerodynamicists, use a combination of hand calculations, experimental data, and complex numerical codes to simulate air flow around each blade. Aerodynamicists designing gas turbines must predict the locations of the shocks to locate inefficiencies in the flow. In this thesis, three methods of calculating the shock angles are compared: analytical, experimental, and computational. Three different airfoil shapes are tested: a rectangular flat plate, a supersonic diamond, and a turbine airfoil. Cascade tests of the airfoil …

Heat, Mass And Force Flows In Supersonic Shockwave Interactions, John Michael Dixon

UNLV Theses, Dissertations, Professional Papers, and Capstones

There is no cost effective way to deliver a payload to space and, with rising fuel prices, currently the price to travel commercially is also becoming more prohibitive to the public. During supersonic flight, compressive shock waves form around the craft which could be harnessed to deliver an additional lift on the craft. Using a series of hanging plates below a lifting wing design, the total lift generated can be increased above conventional values, while still maintaining a similar lift-to-drag ratio. Here, we study some of the flows involved in supersonic shockwave interaction. This analysis uses ANSYS Fluent Computational Fluid …

Techno-Economic Analysis And Engineering Design Consideration Of Algal Biofuel In Southern Nevada, Jian Ma

Mechanical Engineering Faculty Research

As the biological and chemical technologies in algae biofuels production, engineering design, siting and resources are playing some dominant role in successfully developing and scaling locally. The southwest region in U.S. has been identified by DoE and the USDA as the most suitable area for developing algal biofuel production due to several merits like the high level of solar radiation, large arid land not good for food production. Among this region, Southern Nevada has unique advantage to grow microalgae biomass, which is the large amount of CO2 emission from about 16 power plants in Clark County to support the world …

Real-Time On-Board Object Tracking For Cooperative Flight Control, Ajay Kumar Mandava, Emma Regentova, Henry Selvaraj

Electrical & Computer Engineering Faculty Research

One of possible cooperative Situations for flights could be a scenario when the decision on a new path is taken by A Certain fleet member, who is called the leader. The update on the new path is Transmitted to the fleet members via communication That can be noisy. An optical sensor can be used as a back-up for re-estimating the path parameters based on visual information. For A Certain topology, the issue can be solved by continuous tracking of the leader of the fleet in the video sequence and re-adjusting parameters of the flight, accordingly. To solve such a problem …

Efficient Simulation Of Fluid Flow, David Hannasch, Monika Neda

Undergraduate Research Opportunities Program (UROP)

We are computationally investigating fluid flow models for physically correct predictions of flow structures. Models based on the idea of filtering the small scales/structures and also the Navier-Stokes equations which are the fundamental equations of fluid flow, are numerically solved via the continuous finite element method. Crank-Nicolson and fractional-step theta scheme are used for the discretization of the time derivative, while the Taylor-Hood and Mini elements are used for the discretization is space. The effectiveness of these numerical discretizations in time and space are examined by studying the accuracy of fluid characteristics, such as drag, lift and pressure drop.

Design And Fabrication Of A Small Prototype Airframe Structure, Kimberly Lynn Clark

UNLV Theses, Dissertations, Professional Papers, and Capstones

This project called for a first-generation prototype aircraft with hovering capabilities that was lightweight. The focus of this study was to design a small low-cost prototype composite airframe that meets specified requirements, analyze structures using finite element analysis and mechanical testing, and construct a prototype using proven composite manufacturing techniques. One fuselage, one wing, and several engine nacelles were designed and fabricated. Several design and fabrication methods and materials were analyzed, with focus given to the nacelles, and recommendations were provided for the manufacture of the first generation airframe based on time, weight, and cost.

Design Of A "Figure-8" Spherical Motion Flapping Wing For Miniature Uav's, Zohaib Parvaiz Rehmat

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hummingbirds and some insects exhibit a Figure-8 motion, which allows them to undergo variety of maneuvers including hovering. It is therefore desirable to have flapping wing miniature air vehicles (FWMAV) that can replicate this unique wing motion. In this research, a design of a flapping wing for FWMAV that can mimic Figure-8 motion using a spherical four bar mechanism is presented. To produce Figure-8 motion, the wing is attached to the coupler point of the spherical four bar mechanism and driven by a DC servo motor. For verification of the design, a prototype of the wing and mechanism is fabricated …

Turn Constrained Path Planning Problems, Victor M. Roman

UNLV Theses, Dissertations, Professional Papers, and Capstones

We consider the problem of constructing multiple disjoint paths connecting a source point s to a target point t in a geometric graph. We require that the paths do not have any sharp turn angles. We present a review of turn constrained path planning algorithms and also algorithms for constructing disjoint paths. We then combine these techniques and present an O(nlogn) time algorithm for constructing a pair of edge disjoint turn constrained paths connecting two nodes in a planar geometric graph. We also consider the development of a turn constrained shortest path map in the presence of …

College Of Engineering Senior Design Competition Spring 2008, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Modeling Redox-Based Magnetohydrodynamics In Three-Dimensional Microfluidic Channels, Hussameddine S. Kabbani, Aihua Wang, Xiaobing Luo, Shizhi Qian

Mechanical Engineering Faculty Research

RedOx-based magnetohydrodynamic MHD[1] flows in three-dimensional microfluidic channels are investigated theoretically with a coupled mathematical model consisting of the Nernst-Planck equations for the concentrations of ionic species, the local electroneutrality condition for the electric potential, and the Navier-Stokes equations for the flow field. A potential difference is externally applied across two planar electrodes positioned along the opposing walls of a microchannel that is filled with a dilute RedOx electrolyte solution, and a Faradaic current transmitted through the solution results. The entire device is positioned under a magnetic field which can be provided by either a permanent magnet or an electromagnet. …

Adaptive Control Of A Projectile Fin Using Piezoelectric Elastic Beam, Smitha Mani, Sahjendra N. Singh, Surya Kiran Parimi, Woosoon Yim, Mohamed B. Trabia

Mechanical Engineering Faculty Research

No abstract provided.

Variable Structure Control Of Unsteady Nonlinear Aeroelastic System, With Partial State Information, Sushma Gujjula, Sahjendra N. Singh

Electrical & Computer Engineering Faculty Research

This paper treats the question of control of a two-degree-of-freedom unsteady aeroelastic system with partial state information in the presence of uncertainties. The chosen model describes the plunge and pitch motion of a wing and a single trailing-edge control surface is utilized for the purpose of control. Based on the Lyapunov approach, a variable structure control law is derived. For the control law derivation, the system is treated as the interconnection of two subsystems in which the subsystem associated with the unsteady aerodynamics is input-to-state stable. The stability property of this subsystem is exploited to generate a dominating signal for …