Aerospace Engineering Commons^™

Linear Burn Rates Of Monopropellants For Multi-Mode Micropropulsion, Alex J. Mundahl, Steven P. Berg, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-mode micro propulsion is a potential game-changing technology enabling rapidly composable small satellites with unprecedented mission flexibility. Maximum mission flexibility requires propellant that is shared between the chemical and electric propulsion systems. Previous research has identified a promising monopropellant that is both readily catalytically exothermically decomposed (chemical mode) and electro sprayable (electric mode). In this work the linear burn rate of this monopropellant is determined to aid design of the microtube catalytic chemical thruster. A pressurized fixed volume reactor is used to determine the linear burn rate. Benchmark experiments use a 13-molar mixture of hydroxylammonium nitrate and water and show …

Transient Cfd Simulations Of Pumping And Mixing Using Electromagnetic, Fangping Yuan

Doctoral Dissertations

"In this dissertation, two dimensional and three dimensional, transient CFD simulations are conducted to investigate the active pumping and mixing in microfluidics driven by Electromagnetic/Lorentz force. Shallow disk/ring cylindrical microfluidic cell and shallow cuboid microfluidic cell with electrodes deposited on the bottom surface are modelled for mixing and pumping purposes respectively. By applying voltage across specific pair of electrodes, an ionic current is established in the weak conductive liquid present in the cell. The current interacts with an externally applied magnetic field generating a Lorentz force that causes fluid motion in the cell. Velocity vectors, electric potential distributions and ionic …

Evaluation Of Non-Volatile Particulate Matter Emission Characteristics Of An Aircraft Auxiliary Power Unit With Varying Alternative Jet Fuel Blend Ratios, Prem Lobo, Simon Christie, Bhupendra Khandelwal, Simon G. Blakey, David W. Raper

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The aviation industry is increasingly focused on the development of sustainable alternative fuels to augment and diversify fuel supplies while simultaneously reducing its environmental impact. The impact of airport operations on local air quality and aviation-related greenhouse gas emissions on a life cycle basis have been shown to be reduced with the use of alternative fuels. However, the evaluation of incremental variations in fuel composition of a single alternative fuel on the production of non-volatile particulate matter (nvPM) emissions has not been explored. This is critical to understanding the emission profile for aircraft engines burning alternative fuels and the impact …

Materials For Programmed, Functional Transformation In Transient Electronic Systems, Suk Won Hwang, Seung Kyun Kang, Xian Huang, Mark A. Brenckle, Fiorenzo G. Omenetto

Mechanical and Aerospace Engineering Faculty Research & Creative Works

(Graph Presented). Materials and device designs are presented for electronic systems that undergo functional transformation by a controlled time sequence in the dissolution of active materials and/or encapsulation layers. Demonstration examples include various biocompatible, multifunctional systems with autonomous behavior defined by materials selection and layout.

Effects Of Magnetic Fields On Magnetohydrodynamic Cylindrical And Spherical Richtmyer-Meshkov Instability, Wouter Mostert, Vincent Wheatley, Ravi Samtaney, Dale I. Pullin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The effects of seed magnetic fields on the Richtmyer-Meshkov instability driven by converging cylindrical and spherical implosions in ideal magnetohydrodynamics are investigated. Two different seed field configurations at various strengths are applied over a cylindrical or spherical density interface which has a single-dominant-mode perturbation. The shocks that excite the instability are generated with appropriate Riemann problems in a numerical formulation and the effect of the seed field on the growth rate and symmetry of the perturbations on the density interface is examined. We find reduced perturbation growth for both field configurations and all tested strengths. The extent of growth suppression …

Coalescence-Induced Jumping Of Nanoscale Droplets On Super-Hydrophobic Surfaces, Zhi Liang, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Coalescence-Induced Jumping of Tens of Microns Size Droplets on Super-Hydrophobic Surfaces Has Been Observed in Both Experiments and Simulations. However, Whether the Coalescence-Induced Jumping Would Occur for Smaller, Particularly Nanoscale Droplets, is an Open Question. using Molecular Dynamics Simulations, We Demonstrate that in Spite of the Large Internal Viscous Dissipation, Coalescence of Two Nanoscale Droplets on a Super-Hydrophobic Surface Can Result in a Jumping of the Coalesced Droplet from the Surface with a Speed of a Few M/s. Similar to the Coalescence-Induced Jumping of Microscale Droplets, We Observe that the Bridge between the Coalescing Nano-Droplets Expands and Impacts the …

Molecular Simulations And Lattice Dynamics Determination Of Stillinger-Weber Gan Thermal Conductivity, Zhi Liang, Ankit Jain, Alan J.H. Mcgaughey, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Bulk Thermal Conductivity of Stillinger-Weber (SW) Wurtzite GaN in the [0001] Direction at a Temperature of 300 K is Calculated using Equilibrium Molecular Dynamics (EMD), Non-Equilibrium MD (NEMD), and Lattice Dynamics (LD) Methods. While the NEMD Method Predicts a Thermal Conductivity of 166 ± 11 W/m·K, Both the EMD and LD Methods Predict Thermal Conductivities that Are an Order of Magnitude Greater. We Attribute the Discrepancy to Significant Contributions to Thermal Conductivity from Long-Mean Free Path Phonons. We Propose that the Grüneisen Parameter for Low-Frequency Phonons is a Good Predictor of the Severity of the Size Effects in NEMD …

Experimental Investigations Of Dusty Spacecraft Charging At The Lunar Terminator, Kevin Chou, William Yu, Daoru Frank Han, Joseph J. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An experimental investigation is conducted to understand the I-V characteristics and floating potential of a surface covered by varying amounts of dust in a plasma environment similar to that at the lunar terminator. I-V curves are measured to determine dust coverage effects on surface charging, and a non-contacting electrostatic voltmeter is used to measure dust surface charging. Results show that as dust coverage increases, the electric field created between the dust surface layer and conducting surface layer increases the possibility of arcing and breakdown.

Consensus With Reduced Communication Links Via Relative Neighboring Velocity Information, Gerardo De La Torre, Tansel Yucelen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, a consensus protocol is introduced to virtually manipulate the communication topology of a given networked multiagent system - without adding physical edges to the graph. The proposed protocol achieves this objective by utilizing not only neighboring agents' relative position information but also their possibly delayed velocity information. It is shown that the stability of the proposed framework is not dependent on the possible time delay present in the neighboring velocity information. In addition, it is formally proven that utilization of the proposed consensus protocol is equivalent to the addition of virtual communication links in a standard consensus …

Exploitation Of Heterogeneity In Distributed Sensing: An Active-Passive Networked Multiagent Systems Approach, John Daniel Peterson, Tansel Yucelen, Girish Chowdhary, Suresh Kannan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most distributed sensing methods assume that the expected value of sensed information is same for all agents - ignoring differences in sensor capabilities due to, for example, environmental factors and sensors' quality and condition. In this paper, we present a distributed sensing framework to exploit heterogeneity in information provided about a dynamic environment using an active-passive networked multiagent systems approach. Specifically, this approach consists of agents subject to exogenous inputs (active agents) and agents without any inputs (passive agents). In addition, if an active agent senses a quantity accurately (resp., not accurately), then it is weighted high (resp., low) in …

Adaptive Control With Nonlinear Reference Systems, Tansel Yucelen, Benjamin Gruenwald, Jonathan A. Muse, Gerardo De La Torre

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Although reference systems with linear dynamics are common in the adaptive control literature, they can lead to limitations on the achievable closed-loop dynamical system performance. This is due to the fact that linear reference systems can only approximate the desired closed-loop behavior of nonlinear dynamical systems in narrow regions of the state-space. In this paper, we study a new adaptive control architecture for uncertain dynamical systems based on a nonlinear reference system. It is shown that the system error between the uncertain dynamical system and the nonlinear reference system asymptotically vanishes in steady-state, and its performance is guaranteed during the …

Analysis And Design Of Adaptive Control Systems With Unmodeled Input Dynamics Via Multiobjective Convex Optimization, Mario Luca Fravolini, Tansel Yucelen, Jonathan Muse, Paolo Valigi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A challenging problem for adaptive control systems is the accurate characterization of the transient response in the presence of dynamic uncertainties such as a partially known actuator. Considering an actuator modelled as a first order filter with an uncertain control effectiveness and using a projection mechanism for parameters adaptation, we show that the tracking error dynamics behaves as a linear system perturbed by bounded uncertainties. This brings the advantage that the stability analysis can be cast in terms of LMIs so that convex optimization tools can be used for analysis and design. In this framework we propose a mixed linear/adaptive …

A Study Of Mixing In A Magnetohydrodynamic (Mhd) Microfluidic Cell By Numerical Simulations, Fangping Yuan, Kakkattukuzhy M. Isaac

Collaborative Research: Actively Controllable Microfluidics with Film-Confined Redox-Magnetohydrodynamics -- Video and Data

No abstract provided.

Slip Length Crossover On A Graphene Surface, Zhi Liang, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Equilibrium and Non-Equilibrium Molecular Dynamics Simulations, We Study the Flow of Argon Fluid above the Critical Temperature in a Planar Nanochannel Delimited by Graphene Walls. We Observe that, as a Function of Pressure, the Slip Length First Decreases Due to the Decreasing Mean Free Path of Gas Molecules, Reaches the Minimum Value When the Pressure is Close to the Critical Pressure, and Then Increases with Further Increase in Pressure. We Demonstrate that the Slip Length Increase at High Pressures is Due to the Fact that the Viscosity of Fluid Increases Much Faster with Pressure Than the Friction Coefficient between …

An Interoperable System For Automated Diagnosis Of Cardiac Abnormalities From Electrocardiogram Data, Thidarat Tinnakornsrisuphap, Richard E. Billo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electrocardiogram (ECG) data are stored and analyzed in different formats, devices, and computer platforms. As a result, ECG data from different monitoring devices cannot be displayed unless the user has access to the proprietary software of each particular device. This research describes an ontology and encoding for representation of ECG data that allows open exchange and display of ECG data in a web browser. The ontology is based on the Health Level Seven (HL7) medical device communication standard. It integrates ECG waveform data, HL7 standard ECG data descriptions, and cardiac diagnosis rules, providing a capability to both represent ECG waveforms …

Effect Of A Dc Preionization Source On Energy Deposition In A Pulsed Inductive Plasma, Ryan A. Pahl, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Time-Resolved Argon Theta-Pinch Plasma Properties By Line Ratio Method With Collisional-Radiative Model, Warner C. Meeks, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Analysis Of Ion Emitting Jet Structures During Ionic Liquid Electrospraying, Shawn W. Miller

Doctoral Dissertations

"The ionic liquid [Bmim][DCA] is a propellant candidate for a standalone electrospray thruster or a dual-mode propulsion system. Characterization of positive polarity ions produced by [Bmim][DCA] capillary emitters with a nominal extraction voltage of 2.0 kV within a quadrupole and time-of-flight mass spectrometers is presented along with the predictions of propulsion performance. Flow rates from 0.05 to 2.18 nL/s are used to investigate the impact variations in the flow parameter have on the electrospray plume. The retarding potential analysis reveals ions emitted from the capillary are formed below the emitter potential of 500 eV. Angular distributions indicate broadening of both …

Pulsed Inductive Plasma Studies By Spectroscopy And Internal Probe Methods, Warner C. Meeks

Doctoral Dissertations

The broad effort of the Missouri Plasmoid Experiment is to elucidate the energy conversion processes in a pulsed inductive discharge due to the presence of plasma. The test article is a 440 to 490 kHz theta-pinch (or solenoidal) geometry coil with a stored energy of around 80 joules. In this work experimental hydrogen, helium, argon and xenon data at back-fill pressures of 10 to 100 mTorr (1.3 to 133.3 Pa) are obtained and interpreted. Spectral and internal probe studies were performed on MPX Mk.I and Mk.II devices, respectively. IR spectra were acquired in the Mk.I device for argon and xenon. …

Discrete-Time Neural Network Based State Observer With Neural Network Based Control Formulation For A Class Of Systems With Unmatched Uncertainties, Jason Michael Stumfoll

Masters Theses

"An observer is a dynamic system that estimates the state variables of another system using noisy measurements, either to estimate unmeasurable states, or to improve the accuracy of the state measurements. The Modified State Observer (MSO) is a technique that uses a standard observer structure modified to include a neural network to estimate system states as well as system uncertainty. It has been used in orbit uncertainty estimation and atmospheric reentry uncertainty estimation problems to correctly estimate unmodeled system dynamics. A form of the MSO has been used to control a nonlinear electrohydraulic system with parameter uncertainty using a simplified …

Parameter Determination And Experimental Validation Of A Wire Feed Additive Manufacturing Model, Kannan Suresh Kumar

Masters Theses

“Laser metal deposition is an additive manufacturing method with great scope and robustness. The wire fed additive manufacturing method has great opportunities in space applications and other zero gravity manufacturing processes. Process parameters play an important role in controlling the complex phenomenon and obtaining an ideal manufactured part. These parameters can be efficiently determined using simulation tools which are highly essential in visualizing real world experiments, therefore saving time and experimental costs. The objective of this study is to develop a transient 3D model of laser aided wire feed metal deposition which realizes the heat transfer and fluid flow behavior …

Hybrid Manufacturing Process Of SicF/Sic Composite Using Preceramic Polymer, Robert Raymond Meinders

Masters Theses

"Continuous fiber-reinforced silicon carbide (SiC_f/SiC) ceramic composites have been increasingly used due to their high temperature strength and graceful failure mechanisms. A disadvantage is the high cost and lengthy production processes that are required to develop these materials. Polymer infiltration and pyrolysis (PIP) is one of the most attractive fabrication processes for composites due to shape flexibility, mass production and relatively low cost; however, the quality of material obtained by this method has been considered insufficient due to the microstructure defects of the material obtained. This study investigated a hybrid of multiple polymer manufacturing processes to maximize quality …

Adjoint-Based Airfoil Shape Optimization In Transonic Flow, Joe-Ray Gramanzini

Masters Theses

"The primary focus of this work is efficient aerodynamic shape optimization in transonic flow. Adjoint-based optimization techniques are employed on airfoil sections and evaluated in terms of computational accuracy as well as efficiency. This study examines two test cases proposed by the AIAA Aerodynamic Design Optimization Discussion Group. The first is a two-dimensional, transonic, inviscid, non-lifting optimization of a Modified-NACA 0012 airfoil. The second is a two-dimensional, transonic, viscous optimization problem using a RAE 2822 airfoil. The FUN3D CFD code of NASA Langley Research Center is used as the ow solver for the gradient-based optimization cases. Two shape parameterization techniques …

Uncertainty Quantification Of Turbulence Model Closure Coefficients For Transonic Wall-Bounded Flows, John Anthony Schaefer

Masters Theses

"The goal of this work was to quantify the uncertainty and sensitivity of commonly used turbulence models in Reynolds-Averaged Navier-Stokes codes due to uncertainty in the values of closure coefficients for transonic, wall-bounded flows and to rank the contribution of each coefficient to uncertainty in various output flow quantities of interest. Specifically, uncertainty quantification of turbulence model closure coefficients was performed for transonic flow over an axisymmetric bump at zero degrees angle of attack and the RAE 2822 transonic airfoil at a lift coefficient of 0.744. Three turbulence models were considered: the Spalart-Allmaras Model, Wilcox (2006) k-ω Model, and the …

Damage Characteristics In 3d Stitched Composites With Various Stitch Parameters Under In-Plane Tension, Arief Yudhanto, Gilles Lubineau, Isaac Aguilar Ventura, Naoyuki Watanabe, Yutaka Iwahori, Hikaru Hoshi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Three-dimensional (3D) reinforcement by stitching is effective in improving the impact resistance of composites. Stitching, however, adversely affects the composite's in-plane mechanical responses, and alters its damage mechanisms due to stitch-induced irregularities. We experimentally investigate the effect of two important stitch parameters, stitch density and thread diameter, on the damage characteristics of 3D stitched multidirectional composites under in-plane tension using X-ray radiography, X-ray micro-computed tomography and digital image correlation (DIC). Our study shows that composites stitched with thicker thread exhibit improved tensile strength due to effective hindrance of edge-delamination. We also found that stitch thread affects damage behaviors. A higher …

Performance Oriented Adaptive Architectures With Guaranteed Bounds, Benjamin Gruenwald, Tansel Yucelen, Mario Fravolini

Mechanical and Aerospace Engineering Faculty Research & Creative Works

While adaptive control has been used in numerous applications to achieve given system stabilization or command following criteria, the ability to obtain a predictable transient performance is a challenging problem when there is no a priori knowledge about system uncertainties (e.g., their upper bounds and/or domains). In order to address this problem, a new method is presented in [1, 2] utilizing artificial basis functions in the update law of an adaptive control design. This approach is predicated on a gradient minimization procedure and achieves a predictable transient performance without inducing oscillations in the system response as the constant gain due …

Investigation Of Robust Optimization And Evidence Theory With Stochastic Expansions For Aerospace Applications Under Mixed Uncertainty, Harsheel R. Shah

Doctoral Dissertations

One of the primary objectives of this research is to develop a method to model and propagate mixed (aleatory and epistemic) uncertainty in aerospace simulations using DSTE. In order to avoid excessive computational cost associated with large scale applications and the evaluation of Dempster Shafer structures, stochastic expansions are implemented for efficient UQ. The mixed UQ with DSTE approach was demonstrated on an analytical example and high fidelity computational fluid dynamics (CFD) study of transonic flow over a RAE 2822 airfoil.

Another objective is to devise a DSTE based performance assessment framework through the use of quantification of margins and …

Space-Based Relative Multitarget Tracking, Keith Allen Legrand

Masters Theses

"Access to space has expanded dramatically over the past decade. The growing popularity of small satellites, specifically cubesats, and the following launch initiatives have resulted in exponentially growing launch numbers into low Earth orbit. This growing congestion in space has punctuated the need for local space monitoring and autonomous satellite inspection. This work describes the development of a framework for monitoring local space and tracking multiple objects concurrently in a satellite's neighborhood. The development of this multitarget tracking systems has produced collateral developments in numerical methods, relative orbital mechanics, and initial relative orbit determination.

This work belongs to a class …

Electrospray Of An Energetic Ionic Liquid Monopropellant For Multi-Mode Micropropulsion Applications, Steven P. Berg, Joshua L. Rovey, Benjamin D. Prince, Shawn W. Miller, Raymond J. Bemish

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The multi-mode chemical-electric propulsion capable energetic ionic liquid propellant [Emim][EtSO4]-HAN is electro sprayed in a 100 µm capillary emitter to test the electric-mode performance of the propellant. The ionic liquid exhibits stable electrospray emission in both cation and anion extraction modes at a nominal extraction voltage of 3400 V. Near field measurements of current and mass flow rate distribution are taken at flow rates from 0.19 nL/s to 3.06 nL/s. Total emission current, as measured by Faraday cup and integrated, increases from 754 nA to 3195 nA for cation emission and from 552 nA to 2012 nA for anion emission. …

Numerical Simulations Of Surface Charging At The Lunar Terminator, Daoru Frank Han, Joseph J. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A full-particle particle-in-cell (PIC) simulation model is developed to perform fully-kinetic simulations of surface-plasma interactions at the lunar terminator region. This model uses a non-homogeneous immersed-finite-element (IFE) solver to calculate the electric field discontinuity (flux jump) at the plasma-surface interface and surface charging for realistic lunar surface terrain. The simulation includes all plasma species, including the solar wind electrons and ions, as well as photoelectrons with real proton-to-electron mass ratio so the kinetic properties in the mesothermal flow are resolved. We present simulation results of surface charging around a lunar hill at the lunar terminator region.