Aerospace Engineering Commons^™

Exploration Of A Computational Fluid Dynamics Integrated Design Methodology For Potential Application To A Wind Turbine Blade, Gaurav Kapoor

Doctoral Dissertations and Master's Theses

The main purpose of this thesis is to conduct a parametric sensitivity study on the blade design of AOC 15/50 wind turbine based on a CFD approach and optimize the blade design for maximizing the power output. The ANSYS® Fluent® flow solver using the k-ω SST turbulence model was validated by simulating the flow over two dimensional airfoils comprising the AOC 15/50 wind turbine blade. The CFD results have shown a considerable agreement with the experimental data for the airfoils. Parametric correlation study and sensitivity analysis were conducted by performing actual flow simulations over the turbine blade using ANSYS® Fluent®. …

Design Of A Thrust Stand To Introduce Propulsion Concepts In The Classroom, Ethan Hopping

Von Braun Symposium Student Posters

No abstract provided.

Nuclear Thermal Propulsion, Adam Dziubanek

Von Braun Symposium Student Posters

No abstract provided.

The Effect Of Jet Breakup Length On The Acoustic Coupling Of Like-Doublet Injectors, Brian Sweeney

Von Braun Symposium Student Posters

No abstract provided.

Measuring Burning Rate Of Solid Rocket Propellant Using X-Ray Radioscopy, Matthew Denny

Von Braun Symposium Student Posters

No abstract provided.

Design Of A 3-D Printed Unified Hybrid Motor, Matthew A. Hitt, Michael D. Mascaro

Von Braun Symposium Student Posters

No abstract provided.

Development Of An Optically-Actuated Carbon Nanotube (Cnt) Laminated Composite, John Alcorn

Von Braun Symposium Student Posters

No abstract provided.

Small Motor Testing For Determining The Burning Rate Of Solid Propellant, Daniel A. Jones

Von Braun Symposium Student Posters

No abstract provided.

Investigation Of Condensed And Early Stage Gas Phase Hypergolic Reactions, Jacob Daniel Dennis

Open Access Dissertations

Traditional hypergolic propellant combinations, such as those used on the space shuttle orbital maneuvering system first flown in 1981, feature hydrazine based fuels and nitrogen tetroxide (NTO) based oxidizers. Despite the long history of hypergolic propellant implementation, the processes that govern hypergolic ignition are not well understood. In order to achieve ignition, condensed phase fuel and oxidizer must undergo simultaneous physical mixing and chemical reaction. This process generates heat, intermediate condensed phase species, and gas phase species, which then may continue to react and generate more heat until ignition is achieved. The process is not well understood because condensed and …

Investigation Of Pulse Detonation Engine Flow Conditions For Turbomachinery Integration, Luis Estefano Ferrer-Vidal EspañA-Heredia

Doctoral Dissertations and Master's Theses

Pressure gain combustion has been known to be more thermodynamically efficient than its constant pressure counterpart, which employs deflagration. Integration of pressure gain combustors into gas turbine engines has been and still is one of the most important challenges facing the gas turbine industry. Pressure gain combustion devices are inherently unsteady. This unsteadiness affects turbomachinery components designed using steady operation assumptions, and results in mechanical inefficiencies which could outweigh the thermal efficiency benefits. Understanding of turbine components specifically made to operate in the exhaust conditions provided by a pressure gain combustor may yield new turbine design paradigms. As a first …

Reduction Of Secondary Flow Losses In A Turbine For Use In Man-Portable Power Generation, Andrew J. Yatsko

Doctoral Dissertations and Master's Theses

As the world has moved into a more energy-demanding environment, there has been the push for higher energy density in a smaller package. One of the potential solutions is through the application of a gas turbine engine; yet the challenge is extracting the energy efficiently through the small components. The focus of the research is on the turbine components and how the secondary flow losses from the generated airfoil shapes can be reduced to improve component performance. One of the secondary flow loss items to be addressed is the generation of the Horseshoe Vortex. The Horseshoe Vortex is an aerodynamic …

Design Improvements For A Reusable Horizontal Takeoff And Landing Aircraft For Use On Mars, Brian A. Skoog

Mechanical & Aerospace Engineering Theses & Dissertations

Unmanned aerial vehicle capabilities are required for expanded exploration of the Martian surface. These vehicles can not only gather data at an altitude otherwise unreachable by rovers and satellites, but also deliver small payloads and retrieve samples from distant off-site locations. Previous multi-purpose reusable Mars aircraft studies have been unable to achieve the flight ranges required for expanded exploration. This study has focused on increasing the range of prototype aircraft designs. Assuming that large precision cargo delivery capabilities have been developed and much of the infrastructure associated with a fixed Mars base is in place, the challenge of linking dispersed …

Laminar Deflagrated Flame Interaction With A Fluidic Jet Flow For Deflagration-To-Detonation Flame Acceleration, Joseph P. Mcgarry

Mechanical & Aerospace Engineering Theses & Dissertations

The concept of the Pulse Detonation Engine (PDE) has been of interest for centuries. The issue was originally studied to understand flame propagation in mine shafts after explosions due to methane buildup. The flames would travel down the shafts, transitioning to turbulent flames due to the roughness of the shaft walls, and accelerate to detonation, delivering powerful, destructive forces. The potential for efficient energy production was noticed, and the theory behind flame propagation was later applied to developing propulsion systems. Recently, researchers have begun to understand the full potential of PDEs to efficiently produce an immense amount of thrust due …

Design And Evaluation Of Dual-Expander Aerospike Nozzle Upper Stage Engine, Joseph R. Simmons Iii

Theses and Dissertations

The goal of the Dual-Expander Aerospike Nozzle, a modification to traditional engine architectures, is to find those missions and designs for which it has a competitive advantage over traditional upper stage engines such as the RL10. Previous work focused on developing an initial design to demonstrate the feasibility of the Dual-Expander Aerospike Nozzle. This research expanded the original cycle model in preparation for optimizing the engine's specific impulse and thrust-to-weight ratio. The changes to the model allowed automated parametric and optimization studies. Preliminary parametric studies varying oxidizer-to-fuel ratio, total mass flow, and chamber length showed significant improvements. Drawing on modeling …

Microthruster Fabrication And Characterization: In Search Of The Optimal Nozzle Geometry For Microscale Rocket Engines, Katherine L. Fowee, Alina Alexeenko

The Summer Undergraduate Research Fellowship (SURF) Symposium

A major consideration in microsatellite design is the engineering of micropropulsion systems that can deliver the required thrust efficiently with tight restrictions on space, weight, and power. Cold gas thrusters are one solution to the demand for smaller propulsion systems to accommodate the advancements in technology that have allowed for a reduction in the size and thus the cost of satellites. While much research has been done in understanding the flow regimes within these microthrusters, there is a need to understand how different nozzle designs affect microthruster performance. This requires that experimental data be collected on varying nozzles shapes (orifices, …

Characterization And Testing Of A 5.8 Kv Sic Pin Diode For Electric Space Propulsion Applications, Alexandra Toftul

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Inductive Pulsed Plasma Thrusters (IPPTs) are a type of in-space propulsion that has multiple advantages over conventional chemical propulsion for long-duration, deep space missions. Existing IPPT prototypes utilize spark gap switches, however these are subject to corrosion problems that make them unreliable for long-term use. Recent advances in solid state switching technology have opened up a variety of switching options that could provide greater reliability, controllability, and increased energy efficiency. Taking advantage of this, a novel thruster drive circuit topology containing a high-power silicon controlled rectifier (SCR) and series fast recovery diode (FRD) is proposed that is expected to increase …

Dual High-Voltage Power Supply For Use On Board A Cubesat, Nicholas Weiser

Master's Theses

Since their conception in 1999, CubeSats have come and gone a long way. The first few that went into space were more of a “proof of concept,” and were more focused on sending simple data and photographs back to Earth. Since then, vast improvements have been made by over 40 universities and private firms, and now CubeSats are beginning to look towards interplanetary travel. These small satellites could provide a cost effective means of exploring the galaxy, using off the shelf components and piggy-backing on other launch vehicles with more expensive payloads. However, CubeSats are traditionally launched into Low Earth …

Localization And System Identification Of A Quadcopter Uav, Kenneth Befus

Masters Theses

The research conducted explores the comparison of several trilateration algorithms as they apply to the localization of a quadcopter micro air vehicle (MAV). A localization system is developed employing a network of combined ultrasonic/radio frequency sensors used to wirelessly provide range (distance) measurements defining the location of the quadcopter in 3-dimensional space. A Monte Carlo simulation is conducted using the extrinsic parameters of the localization system to evaluate the adequacy of each trilateration method as it applies to this specific quadcopter application. The optimal position calculation method is determined.

Furthermore, flight testing is performed in which real range measurement data …

Lightweight Uav Launcher, Ben Miller, Christian Valoria, Corinne Warnock, Jake Coutlee

Mechanical Engineering

This report discusses the design, construction, and testing of a lightweight, portable UAV launcher. There is a current need for a small team of soldiers to launch a US Marine Tier II UAV in a remote location without transport. Research was conducted into existing UAV launcher designs and the pros and cons of each were recorded. This research served as a basis for concept generation during the initial design development stage. It was required that the design weigh less than 110 lbs, occupy a smaller volume than 48" x 24" 18" in its collapsed state, be portable by a single …

The Effect Of The 2-Dimensional Magnetic Field Profile In Hall Thrusters, Megan Lewis Harvey

Doctoral Dissertations and Master's Theses

Electric propulsion engines, in particular Hall thrusters, provide the possibility of long-distance, low-cost space travel. The geometrical details of the Hall thrusters, especially the magnetic field prole, are crucial to improving their efficiency. The effect of the magnetic field structure was investigated using a simple, two-dimensional model, assuming axial symmetry. The previous one-dimensional conclusion, namely that the details of the shape of the magnetic field are unimportant, was confirmed. This result has implications for the design of future Hall thruster engines, with an eye toward maximizing their efficiency.

System Identification Of An Autonomous Surface Vehicle, Christopher John Cook

Mechanical & Aerospace Engineering Theses & Dissertations

The modeling and system identification of a small pontoon based marine craft, without rudder control, in a controlled environment. Old Dominion University's autonomous surface vehicle was modeled using the Observer/Kalman System Identification method. The experimental position data was collected using a laser positioning system along with Arduino based sensors on board the boat to collect the motor speeds of the dual outboard motors. The data was then compiled using the System/ Observer/Controller Identification Toolbox to derive a dynamic model that is capable of providing path estimation and prediction information to the autonomous robotic system.

Thermal Loss Determination For A Small Internal Combustion Engine, Joshua A. Rittenhouse

Theses and Dissertations

Three analysis techniques were used to measure the heat rejection of a 55 cc air-cooled two-stroke engine. This study was performed as part of a larger effort aimed at extending range and endurance limitations of Group 1 & 2 Remotely Piloted Aircraft (RPA). The engine selected for the study was a 55 cc gasoline-fueled, carbureted, spark-ignition engine made by 3W-Modellmotoren and is representative of RPA engines in these groups. With a surface area to volume ratio of 1.48 ¹/_cm, the engine is in a size region where thermal losses begin to dominate engine efficiency and thermal efficiencies …

The Use Of An Ultra-Compact Combustor As An Inter-Turbine Burner For Improved Engine Performance, Jose L. Miranda

Theses and Dissertations

An Inter-Turbine Burner (ITB) represents a novel mechanism for generating additional work from a gas turbine engine in applications where an afterburner would typically be used. An ITB can achieve higher thermal efficiencies over a typical afterburner while also generating shaft work versus only additional thrust. In an effort to investigate the potential applications for the ITB, a numerical engine cycle comparison was made between the ITB cycle and a conventional afterburning cycle using the Numerical Propulsion System Simulation (NPSS). In the case of thrust augmentation, the ITB model outperformed the afterburning model when Thrust Specific Fuel Consumption (TSFC) is …

Could We Colonize Venus?, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

Evolution Of Perturbations In Flow Field Mechanics, Samantha R. Bell, David Forliti, Nils Sedano, Kriss Vanderhyde

STAR Program Research Presentations

This project explores the stability analysis of a given flow field. Specifically, where the peak disturbance occurs in a flow as this is the disturbance that is most likely to occur. In rocket combustion, it is important to understand where the maximum disturbance occurs so that the mixing of fuel can be stabilized. The instabilities are the results of frequencies in the area surrounding the flow field. The linear stability governing equations are employed to better understand the disturbance. The governing equations for continuity and momentum in the x and y directions are used to form an equation for the …

High-Efficiency Thrust Vector Control Allocation, Jeb S. Orr, Nathan Slegers

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

A generalized approach to the allocation of redundant thrust vector slew commands for multi-actuated launch vehicles is presented, where deflection constraints are expressed as omniaxial or elliptical deflection limits in gimbal axes. More importantly than in the aircraft control allocation problem, linear allocators (pseudoinverses) are preferred for large booster applications to facilitate accurate prediction of the control-structure interaction resulting from thrust vectoring effects. However, strictly linear transformations for the allocation of redundant controls cannot, in general, access all of the attainable moments for which there is a set of control effector positions thatsatisfles the constraints. In this paper, the control …

Design And Evaluation Of A Propulsion System For Small, Compact, Low-Speed Maneuvering Underwater Vehicles, Florence M. Mbithi

Electronic Theses and Dissertations

Underwater vehicles used to perform precision inspection and non-destructive evaluation in tightly constrained or delicate underwater environments must be small, have low-speed maneuverability and a smooth streamlined outer shape with no appendages. In this thesis, the design and analysis of a new propulsion system for such underwater vehicles is presented. It consists primarily of a syringe and a plunger driven by a linear actuator and uses different inflow and outflow nozzles to provide continuous propulsive force. A prototype of the proposed propulsion mechanism is built and tested. The practical utility and potential efficacy of the system is demonstrated and assessed …

Control Design And Performance Analysis For Autonomous Formation Flight Experiments, Caleb M. Rice

Graduate Theses, Dissertations, and Problem Reports (ETD)

Autonomous Formation Flight is a key approach for reducing greenhouse gas emissions and managing traffic in future high density airspace. Unmanned Aerial Vehicles (UAV’s) have made it possible for the physical demonstration and validation of autonomous formation flight concepts inexpensively and eliminates the flight risk to human pilots. This thesis discusses the design, implementation, and flight testing of three different formation flight control methods, Proportional Integral and Derivative (PID); Fuzzy Logic (FL); and NonLinear Dynamic Inversion (NLDI), and their respective performance behavior. Experimental results show achievable autonomous formation flight and performance quality with a pair of low-cost unmanned research fixed …

Fault-Tolerant Trajectory Tracking Of Unmanned Aerial Vehicles Using Immunity-Based Model Reference Adaptive Control, Brenton K. Wilburn

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation presents the design, development, and simulation testing of an adaptive trajectory tracking algorithm capable of compensating for various aircraft subsystem failures and upset conditions. A comprehensive adaptive control framework, here within referred to as the immune model reference adaptive control (IMRAC) algorithm, is developed by synergistically merging core concepts from the biologically- inspired artificial immune system (AIS) paradigm with more traditional optimal and adaptive control techniques. In particular, a model reference adaptive control (MRAC) algorithm is enhanced with the detection and learning capabilities of a novel, artificial neural network augmented AIS scheme. With the given modifications, the MRAC …