Aerospace Engineering Commons^™

Liquid Jet Penetration And Breakup In A Free Supersonic Gas Jet, Hansen Jones

LSU Master's Theses

In the testing of today’s rocket engines, both on large scale vertical test stands and smaller subscale horizontal component testing stands, it is extremely important to be able to accurately quantify and mitigate the thermal and acoustic loads the engines will generate on test stand infrastructure. Due to the large number of parameters that must be considered for many cases, development of a multi-phase computational code is under way to properly analyze and design water spray cooling systems used at NASA’s Stennis Space Center (SSC) and across other NASA centers. As such, a small-scale experiment has been conducted at Louisiana …

Design Of A Heavy Lift Rc Aircraft - Society Of Automotive Engineers (Sae) Aero Design® West Competition Team, Jiyoung Hwang, Phillip Nielsen

Undergraduate Research Symposium - Prescott

The SAE Aero West design competition challenges undergraduate students to design and build an RC aircraft that will fly with the maximum number of passengers and luggage possible. The ERAU SAE team focuses on simulation-based research and project methods such as Computational Fluid Dynamics (CFD), aircraft optimization, and Finite Element Analysis (FEA). Designing and manufacturing a well-designed heavy lift aircraft and competing with other groups will give experience in solving engineering problems. The Aerodynamics team is currently focusing on score optimization, aircraft performance and configuration. The propulsion team is constructing a test rig to test various propellers and motors to …

Design Of A Thrust Stand For Low Power Electric Propulsion, John Norton

Undergraduate Research Symposium - Prescott

Electric propulsion (EP) has been gaining popularity due to the high efficiencies and specific impulse. These thrusters all follow the same general idea of converting stored electrical potential energy to kinetic energy for the craft; typically, this is accomplished by the acceleration of gas particles through three main methods, electrothermal, electromagnetic, and/or electrostatic. The specific impulse is the change of momentum per unit of propellant expended. While chemical propulsion produces a high change in momentum, they use much more propellant mass than an electric thruster. EP devices will typically produce very low thrust, which makes it difficult to measure thrust …

Floating Active Baffles, System And Method Of Slosh Damping Comprising The Same, Dae Won Kim, Rudy L. Baum, Vijay Santhanam, Balaji Sivasubramanian, Sathya Gangadharan

Publications

This disclosure provides a system for damping slosh of a liquid within a tank, a baffle for use in the system, and a method of damping slosh using the system. The system includes a plurality of baffles. Each baffle has a body configured to substantially float upon the liquid. Each baffle also has an activation material received along at least a portion of the body. The activation material is magnetically reactive provided in a quantity sufficient to enable the body to be manipulated in the presence of a magnetic field (M). The system further includes an actuator configured to pro­vide …

Reconstruction Of The 3d Temperature And Species Concentration Spatial Distribution Of A Jet Engine Exhaust Plume Using An Infrared Fourier Transform Spectrometer Hyperspectral Imager, Mason D. Paulec

Theses and Dissertations

The measurement of combustion byproducts is useful for determining pollution of any fuel burning application, efficiency of combustion, and determining detectability of aircraft exhausts. Both intrusive and non-intrusive techniques have been utilized to measure these quantities. For the majority of the non-intrusive techniques, the absorption and emission spectra of the gases are utilized for measurements. For this research, the use of the Telops Infrared Fourier Transform Spectrometer (IFTS) Hyperspectral Imager (HSI) was explored within the scope of combustion diagnostic methods, as an option for remote measurements of a jet turbine to determine concentration of species and temperature of the combustion …

Investigation Of A Pressure Wave Supercharger For An Industrial Diesel Engine, Brian A. Beasley

Theses and Dissertations

Internal combustion engines suffer from decreased performance as altitude is in- creased. This performance decrease can be overcome by increasing the pressure in the engine's intake manifold. Typically, this is accomplished with a turbocharger or supercharger. However, mechanical compression devices such as these suffer from decrease compression efficiency as the size of the device decreases. The size of the compression device scales with the amount of mass ow through the device, and the amount of mass ow is proportional to the size of the engine. This means a small turbocharger for a small engine is less efficient than a larger …

Application Of Spectral Solution And Neural Network Techniques In Plasma Modeling For Electric Propulsion, Joseph R. Whitman

Theses and Dissertations

A solver for Poisson's equation was developed using the Radix-2 FFT method first invented by Carl Friedrich Gauss. Its performance was characterized using simulated data and identical boundary conditions to those found in a Hall Effect Thruster. The characterization showed errors below machine-zero with noise-free data, and above 20% noise-to-signal strength, the error increased linearly with the noise. This solver can be implemented into AFRL's plasma simulator, the Thermophysics Universal Research Framework (TURF) and used to quickly and accurately compute the electric field based on charge distributions. The validity of a machine learning approach and data-based complex system modeling approach …

Clean-Fuel E-Vtol Air Mobility Vehicles For Unmanned And Manned Operations, Larry D. Mccarroll, Brian Morrison, Bruce J. Holmes D.E., Faiaa, Fraes, Henry Vu

National Training Aircraft Symposium (NTAS)

Imagine for a moment, having your very own safe, affordable, clean-fuel, point-to-any point vehicle for travel in the 21st-century 3-dimensional airspace system. Your ultra-reliable e-VTOL allows commuters to leave behind the constraints of hub-and-spoke airports, and the congestion of interstates, turnpikes and freeways. Facilitating Inter- and Intra-urban travel, such as downtown-to-airport, or metropolis-to-metropolis, or home-to-work. Perfect for dense urban environments worldwide. And all while offering the clean power of hydrogen for zero-emission travel.

This vision for efficient, clean, delay-free mobility has been talked about for decades, but always waived aside as some kind of futurist vision. This future requires tackling …

Experimental Evaluation Of A Krypton Propellant Arrangement In A T-100-3 Hall-Effect Thruster, Adam Patel, Javier Cortina Fernandez, Justin Chow, Osvaldo Alejandro Martin, Alexey Shashurin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Stationary Hall thrusters are electric, moderate-specific impulse propulsion systems developed in Russia. These devices manipulate electric and magnetic fields to expel ionized gas (plasma) components, resulting in thrust. The success of Hall-effect engines in USSR satellite-transfer missions quickly sparked western interest in the design. Extensive government and academic study commenced shortly after the dissolution of the Soviet Union, when the technology was made available to the United States. The common SPT-100 model was the primary subject of such studies. Unfortunately, limited literature exists for rare and uncommon Hall thruster models. The T-100-3 stationary plasma thruster suffers from this gap; few …

Experiments Of Propeller-Induced Flow Effects On A Low-Reynolds-Number Wing, Gavin K. Ananda, Robert Deters, Michael S. Selig

Publications

Novel findings are discussed in this paper that will be especially beneficial to designers and modelers of small-scale unmanned air vehicles and high-altitude long-endurance vehicles that both operate at low Reynolds numbers (Re = 50,000-300,000). Propeller-induced Oow effects in both tractor and pusher configurations on a recta ngular wing using the Wortmann FX 63-137 airfoil (a common low-Reynolds-number high-lift airfoil) are presented in this paper . Significant performance benefits can be found for a wing in the tractor configuration. Experiments, including trip tests and upper-surface oil Dow visualization, show and verify that the propeller slipstream induces early transition to turbulent …

Fuel Flow Reduction Impact Analysis Of Drag Reducing Film Applied To Aircraft Wings, Damon Resnick, Chris Donlan, Nimish Sakalle, Cody Pinkerman

SMU Data Science Review

In this paper, we present an analysis of flight data in order to determine whether the application of the Edge Aerodynamix Conformal Vortex Generator (CVG), applied to the wings of aircraft, reduces fuel flow during cruising conditions of flight. The CVG is a special treatment and film applied to the wings of an aircraft to protect the wings and reduce the non-laminar flow of air around the wings during flight. It is thought that by reducing the non-laminar flow or vortices around and directly behind the wings that an aircraft will move more smoothly through the air and provide a …

Electrode Geometry Effects In An Electrothermal Plasma Microthruster, Harrison Raymond King

Master's Theses

Nanosatellites, such as Cubesats, are a rapidly growing sector of the space industry. Their popularity stems from their low development cost, short development cycle, and the widespread availability of COTS subsystems. Budget-conscious spacecraft designers are working to expand the range of missions that can be accomplished with nanosatellites, and a key area of development fueling this expansion is the creation of micropropulsion systems. One such system, originally developed at the Australian National University (ANU), is an electrothermal plasma thruster known as Pocket Rocket (PR). This device heats neutral propellant gas by exposing it to a Capacitively Coupled Plasma (CCP), then …

Thermal Modelling And Validation Of Heat Profiles In An Rf Plasma Micro-Thruster, Alec Sean Henken

Master's Theses

The need and demand for propulsion devices on nanosatellites has grown over the last decade due to interest in expanding nanosatellite mission abilities, such as attitude control, station-keeping, and collision avoidance. One potential micro-propulsion device suitable for nanosatellites is an electrothermal plasma thruster called Pocket Rocket. Pocket Rocket is a low-power, low-cost propulsion platform specifically designed for use in nanosatellites such as CubeSats. Due to difficulties associated with integrating propulsion devices onto spacecraft such as volume constraints and heat dissipation limitations, a characterization of the heat generation and heat transfer properties of Pocket Rocket is necessary. Several heat-transfer models of …

Development Of Digital Diary For Enhanced Parental School Involvement In Tanzania, Sekione R. Jeremiah, Joel S. Mtebe Phd

The African Journal of Information Systems

The study examined the use of digital diary as a tool for enhancing parental school involvement in Tanzania. The development of the digital diary followed eXtreme Programming agile method where 87 parents and 6 teachers from St. Florence school were involved. Parents and teachers were given six months to use the tool before testing for its effectiveness using data from 7 teachers and 156 parents through semi-structured interviews and questionnaires respectively. The study found that the majority of respondents (84.4% of parents and 96.7% of teachers) indicated that the digital diary was useful tool as enabled them to track children’s …

Propulsive Battery Packs Sizing For Aviation Applications, Tianyuan Zhao

Doctoral Dissertations and Master's Theses

This thesis derives analytical methods for sizing the propulsive battery packs for designing an electric-driven aircraft. Lithium-Ion (Li-Ion) battery is the primary choice of battery cell chemistry in this thesis research due to its superior specific energy and market availability. The characteristics of Lithium-Ion battery cells are first determined and studied using experimental test results and manufacturers published data. Based on the design requirement to the battery system, the battery sizing will fall into one of the two sizing categories. The first category is power sizing, which requires the battery’s ability to deliver full power demanded by the electric motor. …

2018 Spring Graduate Recognition Program, Propulsion Research Center, Robert Frederick

PRC Graduate Recognition

This program includes the graduate recognition program for spring 2018. Includes photographs, upcoming events, recent publications, and student profiles.

Algal Biofuel: The Future Of Green Jet Fuel In Air Transportation, Rajee Olaganathan

Publications

The aviation industry is one of the major contributors for the greenhouse gases. As air travel has become inevitable in this modern era, and fossil fuel usage is not sustainable, it is essential to produce renewable fuel and commercialize it to reduce the greenhouse gas emissions. In order to produce an alternate aviation biofuel a lot of industrial and academic collaborations have been developed worldwide. The main concern of this collaborative research is to produce aviation biofuel from renewable resources with low environmental impacts, and which is sustainable at an economically viable price. This mini-review briefly discusses the biotechnological approaches …

Design, Buildup, And Testing Of A Radial Rotating Detonation Engine For A Compact Auxiliary Power Unit, Riley Huff

Theses and Dissertations

Current power generators consume a large portion of the aircrafts usable volume and they are also extremely heavy for the amount of power that they can produce. Therefore, a need for compact, lightweight Auxiliary Power Units (APU) with high power density has arisen. A novel solution to this problem comes in the form of coupling a Rotating Detonation Engine (RDE) with a turbine generator. A new type of RDE referred to as the Radial Rotating Detonation Engine (RRDE) has been developed to fill this need. This project marks the first radial ow RDE successfully operated in the United States, and …

Characterization And Analysis Of Plasma Instabilities In A 600 W Permanent Magnet Hall Thruster, Samuel D. Wright

Theses and Dissertations

Electric propulsion is an important technology for the future of space operations and exploration. Within the range of electric propulsion devices, Hall Effect Thrusters provide a balance of thrust and specific impulse well-suited for many Earth-centric missions. Hall Effect Thrusters have been studied since their development in the 1960s and have been flown on hundreds of spacecraft, but the intimate details of the plasma behavior within the thruster exhaust plume are still not well understood. Furthering this knowledge may be key to improving thruster design to yield better performance and longer lifetimes. To this end, experiments were conducted to measure …

Analysis Of Additively Manufactured Injectors For Rotating Detonation Engines, Michael C. Waters

Theses and Dissertations

This research represents an experimental and computational analysis of additively manufactured injectors for Rotating Detonation Engines (RDEs) for use in rocket propulsion. This research was based on the manufacture and testing of existing injector element designs using additive techniques. The designs were modeled from geometries gathered from Sutton and Biblarz Elements of Rocket Propulsion [23]. The goal of this research was to characterize the viscous losses of each design based on the discharge coefficient. The designs were computationally simulated to gain insight to the flow characteristics using multiple sets of conditions for surface roughness and inlet pressure. The results were …

An Airplane-Helicopter Hybrid Called Racer Is A New Convertiplane Design From Airbus, Nihad E. Daidzic

Aviation Department Publications

Airbus recently unveiled an airplane-hybrid design named Rapid and Cost Efficient Rotorcraft (RACER)...I'll explore the aerodynamics that make such a design possible.

Unmanned Aerial Systems: Research, Development, Education & Training At Embry-Riddle Aeronautical University, Michael P. Hickey

Publications

With technological breakthroughs in miniaturized aircraft-related components, including but not limited to communications, computer systems and sensors, state-of-the-art unmanned aerial systems (UAS) have become a reality. This fast-growing industry is anticipating and responding to a myriad of societal applications that will provide new and more cost-effective solutions that previous technologies could not, or will replace activities that involved humans in flight with associated risks.

Embry-Riddle Aeronautical University has a long history of aviation-related research and education, and is heavily engaged in UAS activities. This document provides a summary of these activities, and is divided into two parts. The first part …

Specific Air Range (Sar) And How To Estimate It, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

The Exploration Of Rotating Detonation Dynamics Incorporating A Coal-Based Fuel Mixture, John P. Rogan

Honors Undergraduate Theses

This investigation explores the detonation dynamics of a rotating detonation engine (RDE). Beginning with the general understanding and characteristics of hydrogen and compressed air as a detonation fuel source, this study further develops the experimental approach to incorporating a coal-based fuel mixture in an RDE. There is insufficient prior research investigating the use of coal as part of a fuel mixture and insignificant progress being made to improve thermal efficiency with deflagration. The U.S. Department of Energy's Office of Fossil Energy awarded the Propulsion and Energy Research Laboratory at the University of Central Florida a grant to lead the investigation …

Simulation Of Non-Premixed Ethylene-Air Crossflow Jet Flame, Jennifer Onyinye Chikelu

Electronic Theses and Dissertations

Computational fluid dynamics tool has been employed in the past to determine and analyze efficiency or performance in combustion engines and for combustion analysis. This paper represents a systematic investigation on the best model predicts the temperature and soot production in coflow jet flame, by applying various RANS turbulent model, soot models and radiation models in presence or absence of gravity. It also applies this model predicted in crossflow jet flame and investigates the velocity ratio (ratio of the velocity of fuel jet to the velocity of air stream) variation effect on temperature and soot production. ANSYS-Fluent CFD software tool …

Development Of Ceramic 3d Printer Using Cold-Based Extrusion, Noah Naden

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Mechanisms Of Lean Flame Extinction, Ian M. Lasky

Honors Undergraduate Theses

Lean flame blowout is investigated experimentally within a high-speed combustor to analyze the temporal extinction dynamics of turbulent premixed bluff body stabilized flames. The lean blowout process is induced through fuel flow reduction and captured temporally using simultaneous high-speed particle imaging velocimetry (PIV) and CH* chemiluminescence. The evolution of the flame structure, flow field, and the resulting strain rate along the flame are analyzed throughout extinction to distinguish the physical mechanisms of blowout. Flame-vortex dynamics are found to be the main driving mechanism of flame extinction; namely, a reduction of flame-generated vorticity coupled with an increase of downstream shear layer …

Optimal Sintering Temperature Of Ceria-Doped Scandia Stabilized Zirconia For Use In Solid Oxide Fuel Cells, Amanda K. Assuncao

Honors Undergraduate Theses

Carbon emissions are known to cause decay of the Ozone layer in addition to creating pollutant, poisonous air. This has become a growing concern among scientists and engineers across the globe; if this issue is not addressed, it is likely that the Earth will suffer catastrophic consequences. One of the main culprits of these harmful carbon emissions is fuel combustion. Between vehicles, power plants, airplanes, and ships, the world consumes an extraordinary amount of oil and fuel which all contributes to the emissions problem. Therefore, it is crucial to develop alternative energy sources that minimize the impact on the environment. …

Laminar And Turbulent Study Of Combustion In Stratified Environments Using Laser Based Measurements, Stephen William Grib

Theses and Dissertations--Mechanical and Aerospace Engineering

Practical gas turbine engine combustors create extremely non-uniform flowfields, which are highly stratified making it imperative that similar environments are well understood. Laser diagnostics were utilized in a variety of stratified environments, which led to temperature or chemical composition gradients, to better understand autoignition, extinction, and flame stability behavior. This work ranged from laminar and steady flames to turbulent flame studies in which time resolved measurements were used.

Edge flames, formed in the presence of species stratification, were studied by first developing a simple measurement technique which is capable of estimating an important quantity for edge flames, the advective heat …

Application Of Artificial Neural Networks For The Prediction Of Aluminium Agglomeration Processes, Tejasvi K, Y Pydi Setty, Vemana Venkateswara Rao, Kalyan Chakarvarthy

International Journal of Aviation, Aeronautics, and Aerospace

Aluminium is universal and vital constituent in composite propellants and typically used to improve performance. Aluminum agglomeration takes place on the burning surface of aluminized propellants, which leads to reduced combustion efficiency and 2P flow losses. To understand the processes and behaviour of aluminum agglomeration, particles size distribution of composite propellants were studied using a quench particle collection technique, at 2 to 8 MPa and varying quench distances from 5mm to 71mm. To predict the agglomerate diameter of metallized/ultra-fine aluminium of composite propellants, a new artificial neural network (ANN) model was derived. Five Layered Feed Forward Back Propagation Neural Network …