Aerospace Engineering Commons^™

Global Time-Resolved Measurements Of Inlet/Isolator Unstart Induced By Mass Injection, Andrew N. Bustard, Benjamin L. Bemis, Aaron Marques, Matthew J. Zahr, Thomas J. Juliano

Publications

The inner surface pressure of an axisymmetric inlet/isolator model was measured using anodized-aluminum pressure-sensitive paint (PSP) viewing through cast acrylic. Temperaturesensitive paint was utilized to correct for the PSP’s temperature sensitivity. The model was tested under Mach 5.7 flow at 𝑹𝒆 = 7.1 ×106 /m under conventional noise conditions. Transverse jet injection with jet-to-inlet mass-flow ratios up to 0.8 was used to induce unstart in the inlet/isolator. Background-oriented schlieren visualization of the inlet shocks was collected simultaneously with the PSP to determine when the inlet unstarted. Computational fluid dynamics results were used to determine off-wall flow structures and quantify approach …

Prediction Of Satellite Temperature During An Orbit Of A Cubesat, Michael Reynolds

Honors Theses

This thesis develops a thermal-simulation strategy for predicting CubeSat component temperatures, applied to Jag-Sat-1, a CubeSat developed at the University of South Alabama and deployed from the International Space Station in 2022. The orbit was reconstructed from two-line element (TLE) data using simplified general perturbations (SGP4) propagation, and spacecraft attitude was recovered from onboard gyroscope measurements. Sunlight, penumbra, and umbra intervals were computed geometrically, and the external radiative environment — direct solar, Earth infrared, and albedo heat fluxes — was modeled using orientation-dependent view factors. These time-varying fluxes drove a transient finite-element thermal simulation of the full satellite geometry in …

Numerical Method For Strongly Variable-Density Flows At Low Mach Number: Flame-Sheet Regularisation And A Mass-Flux Immersed Boundary Method, Matheus P. Severino, Fernando F. Fachini, Elmer M. Gennaro, Daniel Rodríguez, Leandro F. Souza

Mathematical Modelling and Numerical Simulation with Applications

A low-Mach-number flow, in the laminar regime, has intrinsically two characteristic spatial scales for a given time scale, or two characteristic temporal scales for a given spatial scale, and these dual scales are very different due to the disparity between the flow and acoustic speed. Therefore, low-Mach-number flows impose mathematical and computational challenges in their description. Standard numerical methods for compressible flows, which are typically designed for problems with a single dominant spatial and temporal scale, require alternative approaches, such as preconditioning techniques or solvers tailored for low-Mach-number equations. The present work introduces a simplified fluid dynamics model for flows …

Robust Real-Time Uav Target Tracking With Onboard Vision-Based Yaw Control, Rylan Malarchick, Jose Castelblanco, Enrique Amaya, Carmen Dimario, Graysen Brinkman, Chirag Kumar, Kiwon Yoon, Sajid Berhane

Beyond: Undergraduate Research Journal

Autonomous tracking of agile unmanned aerial vehicles (UAVs) presents significant challenges for real-time perception and control systems. This work presents AIRHOUND (Autonomous Intelligent Rotorcraft for Hostile Object Unified Navigation and Detection), a UAV platform implementing vision-based yaw tracking through a modular ROS2 software architecture. The system employs YOLOv8 object detection optimized with NVIDIA TensorRT for embedded deployment on an NVIDIA Jetson Orin companion computer. Detected targets are processed through a geometric tracking module that converts pixel coordinates to angular yaw errors using pinhole camera intrinsics, with a proportional controller generating rate-limited yaw commands. These commands are streamed to a PX4 …

Comparative Analysis Of Leaflet Materials, Stent Materials, And Stent Cell Density For Bileaflet Transcatheter Mitral Valve Design, Joseph Chibuike Nwokeafor, Joshua D. Hofmeister, Breandan B. Yeats, Lakshmi Prasad Dasi, Charanjit S. Rihal, Juan A. Crestanello, Leigh Griffiths, Mohamad A. Alkhouli, Hoda Hatoum

Michigan Tech Publications

Background: The biomechanical performance of bileaflet transcatheter mitral valves (TMVs) depends on complex interactions between leaflet material behavior and stent design. However, the contributions of leaflet materials and constitutive models, stent materials, and stent geometry to valve function and durability remain poorly understood. Methods: A parametric finite element study was conducted using a CAD model of a bileaflet TMV subjected to physiological pressure loading. Five leaflet material models were evaluated: 3 glutaraldehyde-fixed tissues—bovine pericardium (BP; FBP1, FBP2) and porcine pericardium (PP; FPP)—and 2 unfixed tissues—bovine (UBP) and porcine pericardium (UPP). BP was modeled as a linear elastic (FBP1) and Ogden …

Winddensity-Mbir: Model-Based Iterative Reconstruction For Wind Tunnel 3d Density Estimation, Karl J. Weisenburger, Gregery T. Buzzard, Charles A. Bouman, Matthew R. Kemnetz

Faculty Publications

Experimentalists often use wind tunnels to study aerodynamic turbulence, but most wind tunnel imaging techniques are limited in their ability to take non-invasive three-dimensional (3D) density measurements of turbulence. Wavefront tomography is a technique that uses multiple wavefront measurements from various viewing angles to non-invasively measure the 3D density field of a turbulent medium. Existing methods make strong assumptions, such as a spline basis representation, to address the ill-conditioned nature of this problem. We formulate this problem as a Bayesian, sparse-view tomographic reconstruction problem and develop a model-based iterative reconstruction algorithm for measuring the volumetric 3D density field inside a …

Improving The Reliability And Performance Of A Supersonic Indraft Tube Wind Tunnel, Christian J. Kaml

Master's Theses

Access to supersonic testing is increasing in demand, and wind tunnels remain one of the safest and most cost-effective methods for gathering high-speed flow data. Despite being more economical than alternative options, supersonic wind tunnel facilities often require substantial investment to construct, operate, and maintain.

The novel indraft tube tunnel architecture was conceived as a high-speed flow testbed that incorporates features of both Ludwieg tubes and indraft wind tunnels to maintain costs low enough to be accessible even to small universities. This design was first developed and tested in 2018 at California Polytechnic State University, featuring a cost per test …

A2s Uplink Latency Minimization For Wildfire Monitoring Systems Using Mbse And Stochastic Modeling, Luis Giovanni Wang

Master's Theses

Wildfire response depends on how quickly a detection reaches the people who act on it, and the slowest remaining step is often the link that carries an alert from a remote sensing platform to a satellite. This thesis models the latency of that link, the Air-to-Space uplink, for a wildfire-monitoring UAV that carries a Starlink terminal and sends an ALERT packet to a serving Low Earth Orbit satellite. The uplink is difficult to predict because both the UAV and the satellite move, and because the wildfire environment degrades the channel at the moment the data matters most.

The thesis uses …

Seizing Strategic High Ground Of Space Computing Power: Global Competition Landscape And China’S Path, Yan Chen, Wenbin Song, Ping Zhang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The deep integration of artificial intelligence and commercial aerospace is accelerating the transformation of space computing power from conceptual exploration to engineering verification, becoming a key direction for building an integrated space-air-ground information infrastructure. This study delves into its strategic value, global landscape, industrial chain bottlenecks, and advancement paths. The research reveals that the core value of space computing power does not lie in replacing ground data centers, but rather in focusing on network coverage blind spots, data transmission limitations, and high-timeliness scenarios, providing a new supply model of “in-orbit computing + space-ground collaboration”. Currently, the world has entered a …

Meeting The Moment With Ai-Employer Informed Education, Brent Terwilliger, John Faraca

Publications

As artificial intelligence transforms aviation, aerospace, and autonomy-related sectors, higher education must adapt to meet evolving workforce demands. This session shares emerging findings from a nationwide study led by Embry-Riddle Aeronautical University, focused on employer perceptions of AI adoption, responsible use, and workforce preparedness in domains including uncrewed systems, space systems, robotics, and advanced air mobility. Based on a structured survey and follow-up interviews, the presentation explores how organizations are using AI tools, from generative platforms to enterprise systems, and defining effective and inappropriate use in operational contexts. Participants will gain insight into critical concerns (e.g., data privacy, compliance, security, …

Leveraging Information Theory And Ecological Network Analysis To Monitor Communication Networks In A Student Aerospace Team, Christine Sessions

Doctoral Dissertations and Master's Theses

Effective communication is a critical component of successful collaboration in group projects and team settings. However, systematically tracking and analyzing team communications can be challenging, especially in complex, multi-member teams such as those found in the aerospace industry. This paper explores an information-theoretic approach that leverages encoding techniques and graph theory to analyze communication networks within a university’s multi-year, student-led cubesat design project (Project COMET). By utilizing Shannon Entropy as a measure of information flow, encoding communication patterns, and analyzing Ecological Network Analysis parameters, this research aims to understand how an Embry-Riddle Aeronautical University student project team evolves over the …

Measurements And Scaling Of Ion Propulsion Impulse During Driven Magnetic Reconnection, Fatima Ebrahimi, Nicholas A. O'Gorman, Kush Maheshwari, Jongsoo Yoo, Alexandre Sainterme, Hantao Ji

Faculty Publications

Impulse scaling during magnetic reconnection, the magnetic energy conversion to kinetic energy, via direct Mach probe measurements in Magnetic Reconnection Experiment is examined. Ion exhaust velocity and impulse scalings with reconnecting magnetic field during the push phase of driven reconnection are presented. The outflows and impulse measurements are compared with global MHD simulations. Both measurements and simulations reveal a favorable scaling, greater than linear, of impulse with reconnecting field. These scaling results establish that magnetic reconnection could be utilized for plasma propulsion.

Aircraft Fault Detection Via Weight And Bias Analysis Of A Custom First Neural Network Layer, George Harrison Chen

Theses and Dissertations

Fault detection in aircraft is traditionally handled through redundant hardware and comparison algorithms to detect failures. Alternatives like model-based residual generation and data-driven approaches such as supervised fault classification and unsupervised anomaly detection have been explored, but they suffer from practical limitations; model-based methods require accurate system models, and data-driven methods have large constraints on the data limiting scalability and adaptability. This work presents a purely data-driven neural network architecture featuring a custom first layer designed for real-time fault detection where the weights and biases of this layer are used to detect faults. The network requires zero supervision and complements …

Turbulent Plenum Jet-Crossflow Validation Via Subgrid Scale Model Variation And Upstream Forcing Under Dynamic Hybrid Rans-Les, Cole W. Mccallum

Mechanical Engineering Undergraduate Honors Theses

In modern gas turbine design, film cooling has become ubiquitous as a method for limiting heat transfer between high temperature gases post-combustion and the surface of downstream blades. This paper validates the use of various computational fluid dynamics techniques in recreating an experiment measuring adiabatic effectiveness over a surface downstream of a compound-angle N2 plenum jet incident on a turbulent-air boundary layer [1]. To do this, both RANS and Dynamic Hybrid RANS-LES (DHRL) methods are implemented and compared to previous research [2]. The latter method is then modified through implementation of a different subgrid scale (SGS) model and through addition …

Manned Exploration Of Satellites Of The Outer Planets: An Analysis Of Current Technologies And A Discussion Of Advancements Required, Joshua Carson Meador

Theses and Dissertations

The Solar System’s outer planets have many satellites, some of which are known to be the most likely places to find extraterrestrial life in our celestial backyard. Multiple scientific missions have been sent to glean information from these satellites, yet the possibility of a manned expedition has long been exclusive to science fiction stories. This paper intends to collect and analyze the current state of space travel technology to explore the feasibility of such a mission with modern technology and to discuss which future advancements should be the focal point for making such missions a reality. To begin, data on …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

Adaptive Artificial Potential Field Guidance And Control For Autonomous Docking With Uncooperative And Unknown Spacecraft, Steven Holmberg

Theses and Dissertations

The increasing demand for on-orbit servicing (OOS), active debris removal (ADR), and space domain awareness (SDA) missions has increased the need for autonomous spacecraft rendezvous and proximity operations (RPO) with uncooperative and unknown targets. Traditional guidance and control methods are typically designed for cooperative systems with known geometry and state information. This work builds on previous research to develop and evaluate an artificial potential field (APF)-based control framework capable of autonomous operation with minimal prior target knowledge and applicability to both relatively static and tumbling spacecraft.

The proposed APF formulation incorporates established safety constructs from cooperative docking systems, including an …

Program And Proceedings, The Nebraska Academy Of Sciences 1880–2026: 146th Anniversary Year, One Hundred-Thirty-Sixth Annual Meeting

Nebraska Academy of Sciences: Programs and Proceedings

Program and abstracts of the proceedings for the Nebraska Academy of Sciences 136th annual meeting, 2025

Sessions

Aeronautics and Space Science

Anthropology

Biological and Medical Sciences

Earth Sciences

Ecology, Sustainability, and Environmental Science

Physics and Engineering

General Poster Session

2026 Maiben Lecture: Shifting Extremes: Understanding Nebraska’s Changing Climate and Preparing for What Lies Ahead, Deborah Bathke

2026 Friends of Science Awards: Julie Shaffer and Irina Filina

2026 C. Bertrand and Marian Othmer Schultz Colleaguate Schoalrship Award: Piper Ryschon and Bryce Reeson

In Memoriam: Paul Royster

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

A Scalable Iteration Of The Horizon Simulation Framework Using Multithreading Techniques, Jason E. Beals

Master's Theses

The Horizon Simulation Framework (HSF) occupies a unique space in the modern aerospace modeling landscape, enabling flexible, modular modeling of mission-level agent behavior through an object-oriented, hierarchical design. HSF's hallmark breadth-first search scheduling algorithm explores a "multiverse" of possible mission execution pathways, enabling exhaustive evaluation of schedule combinations against user-defined heuristics.

As aerospace systems become increasingly complex, HSF faces critical challenges in establishing verifiable, deterministic behavior. The framework's core scheduling algorithm had not undergone systematic validation, leaving questions about temporal consistency, state management correctness, and reproducibility across different program executions. Furthermore, the exponential growth of schedule combinations creates computational bottlenecks …

Evaluating Regularized Logistic Regression And K-Nn On Mnist Under Increasing Random Missingness, Daniel Markwei

Data Science and Data Mining

This paper investigates the effect of random missingness on the performance of regularized multinomial logistic regression and the k-nearest neighbors (k-NN) classifier for handwritten digit recognition on the MNIST dataset. In particular, we study L1-regularized (LASSO) logistic regression and L2-regularized (Ridge) logistic regression alongside k-NN. Varying percentages of random missingness were introduced into the original dataset, and each model was evaluated in terms of its classification performance. The results show that random missingness degrades the performance of all three classifiers. Overall, k-NN consistently achieves higher accuracy than both L1- and L2-regularized logistic regression across all missingness levels; however, its performance …

Discovery Of Dynamical Structures Mapping Chaotic Transport Pathways In The Earth–Moon Cr3bp, Tyler J. Kapolka, Christina E. Paljug, Robert A. Bettinger, Rachel Oliver, Bruce A. Cox, Jeremiah A. Specht

Faculty Publications

Chaos; Deterministic chaos; Earth–Moon system; Poincaré map; Quasi-chaotic; Surface of section /// For the Circular Restricted 3-Body Problem (CR3BP), the topologies present within a Poincaré map enable the extraction of useful information regarding periodic, quasi-periodic, and chaotic trajectory behavior. Aside from the prominent topologies that follow distinct concentric patterns around fixed points, indicative of the periodic and quasi-periodic motion that is often the central focus of CR3BP research, there are also many “dusty” regions on the Poincaré map that appear random without an apparent structure and are indicative of chaotic motion. This paper, for the first time in literature, identifies …

Statistical Analysis Of Log Transformation Effectiveness In Air Traffic Movement Forecasting During Covid-19 In South Africa, John Lehlaka Masekoameng

Journal of Aviation Technology and Engineering

This study evaluates the effectiveness of log transformation in enhancing multiple regression models used to forecast air traffic movements (ATMs) in South Africa during the COVID-19 pandemic. Using 60 monthly observations from October 2016 to September 2021, the analysis incorporates variables such as revenue, lockdown levels, COVID-19 metrics, exchange rates, gross domestic product, and population. Two models are compared: one using raw ATMs and another with log-transformed ATMs as the dependent variable.

While the untransformed model shows stronger explanatory power (R² = 0.904, adjusted R² = 0.891) compared to the log-transformed model (R² = 0.772, adjusted R² = 0.741), the …

Detecting And Repairing Conflicting Constraints In Co-Trained Physics-Informed Neural Networks For Composite Curing Processes, Cooper J. Evans

Dissertations, Master's Theses and Master's Reports

Composite materials have become a critical component of modern manufacturing, especially in the automotive and aerospace industries. The curing process for these composites has been modeled using a variety of partial differential equations representing the heat transfer and composite curing kinetics. Optimizing the applied temperature profile is critical for maximizing the efficiency and capacity of composite part manufacturers. Constraints must be placed on the inputs and outputs of the model, including but not limited to, the applied temperature profile, part temperature, and final degree of cure. Conflicting sets of constraints are easy to unknowingly impose due to the highly coupled …

Gradient-Based, Post-Optimality Sensitivity Analysis With Respect To Parameters Of State Equations, Gene Hou, Jonathan Degroff

Mechanical & Aerospace Engineering Faculty Publications

Design optimization is a computational tool that can enable a designer to investigate the effectiveness of a design concept in an organized format. However, this design process requires the design variables, constraints, and objective function to be properly defined and expressed in mathematical forms. Post-optimality analysis thus becomes a necessary step to investigate different variations in the problem formulation and parameters to ensure that optimization produces a stable and trustworthy outcome. One efficient way to achieve this aim is to compute the local derivative of the optimized objective function with respect to the optimization problem parameters, such as bounds on …

Uncertainty Quantification, Propagation & Conjunction Assessment In Orbital Mechanics Using Generalized Polynomial Chaos Expansion & 2-Dimensional Conjunction Plane Analysis Techniques, Monalisa Karim

Mechanical and Aerospace Engineering Theses

Uncertainties, that are inherent to dynamic models, can be associated with state initial conditions, force modelling errors, navigation and actuation errors. In system modelling stochastic differential equations are used to represent dynamic phenomena with uncertainties, for which the solutions are probability density functions of quantities of interest characterizing the realization of the stochastic processes. In Polynomial Chaos Expansion (PCE) propagation, these solutions are represented as weighted sums of multivariate spectral polynomials that are functions of the input random variables. Generalized polynomial chaos expansion (gPC) is an extension to the original homogenous PCE which projects the random solution onto a basis …

Computational Study Of Rotating Detonation Combustors, Aditya Balasubramaniam

Mechanical and Aerospace Engineering Theses

Rotating detonation combustors (RDCs) are pressure-gain combustion devices that sustain one or more continuously rotating detonation waves, offering potential thermodynamic and performance advantages over conventional deflagration-based systems. Their behavior depends strongly on combustor geometry and operating conditions. Understanding these effects is therefore essential for the design and optimization of practical RDCs. Accordingly, this thesis numerically investigates annular RDCs with two primary objectives: (1) to evaluate the effects of propellant mass flux and (2) to assess the influence of annular width on detonation-wave dynamics and combustor performance.

A finite-volume framework is used to solve the compressible reactive Euler equations with hydrogen–air …

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

The relationships among deep learning, edge computing, artificial intelligence (AI), and the most recent advancements in digital twin (DT) technology for battery energy storage systems are discussed in this paper. The study highlights the need for improved cloud-edge coordination, AI model development, and stronger cybersecurity features by demonstrating real-world applications of digital twin technology in electric vehicles (EVs), aircraft, and grid storage. It also described DT-based structures for fault detection, real-time monitoring, and optimization through standardization and battery management system (BMS) fusion. Because DT-based solutions for distributed energy resources (DERs) offer improved energy management systems, various studies have been conducted …

Large Telescope Mount For Long Exposure Photos, Payne M. Landis, Anna J. Gray

Williams Honors College, Honors Research Projects

When viewing the stars through a telescope, it is common that the object you are viewing drifts out of view. Many amateur astronomers seek to capture long exposure images of the stars, planets, and galaxies with commercially available sky tracking telescope mounts. The complication is that these telescope mounts are both incredibly expensive and have low weight limits. These issues limit accessibility to these products based on the telescope. For each person, telescope parameters determine the amount of light and magnification that can be viewed, which then determines exposures time for adequate photo results. The options on the market for …

Dynamic Modeling Of The Earth's Trapped Proton Environment, Xiaojing Xu, Steve R. Blattnig, Francis F. Badavi, Martha S. Clowdsley, Edward J. Semones

Physics Faculty Publications

Context: Reliable prediction of space radiation exposure is critical for safeguarding spacecraft systems and ensuring astronaut health during missions. Accurate radiation risk assessment for space mission requires advanced models of the Earth’s trapped proton environment. These models must reflect temporal variations driven by geomagnetic field evolution and solar cycle modulation. Existing static models, such as AP8 and IRENE-AP9, are not designed to fully capture these evolving conditions. Aims: This paper presents a dynamic modeling method for the prediction of trapped proton fluxes, which incorporate time-dependent variations due to geomagnetic field evolution and solar cycle fluctuations. Methods: The …