Aerospace Engineering Commons^™

Gnss Software Defined Radio: History, Current Developments, And Standardization Efforts, Thomas Pany, Dennis Akos, Javier Arribas, M. Zahidul H. Bhuiyan, Pau Closas, Fabio Dovis, Ignacio Fernandez-Hernandez, Carles Fernandez-Prades, Sanjeev Gunawardena, Todd Humphreys, Zaher M. Kassas, Jose A. Lopez Salcedo, Mario Nicola, Mario L. Psiaki, Alexander Rugamer, Yong-Jin Song, Jong-Hoon Won

Faculty Publications

Taking the work conducted by the global navigation satellite system (GNSS) software-defined radio (SDR) working group during the last decade as a seed, this contribution summarizes, for the first time, the history of GNSS SDR development. This report highlights selected SDR implementations and achievements that are available to the public or that influenced the general development of SDR. Aspects related to the standardization process of intermediate-frequency sample data and metadata are discussed, and an update of the Institute of Navigation SDR Standard is proposed. This work focuses on GNSS SDR implementations in general-purpose processors and leaves aside developments conducted on …

Ai-Based Defect Detection In Aerospace Ultrasonic Signals, Rami Issac Lake

Graduate Research Theses & Dissertations

Ensuring the safety and integrity of materials and structures throughout the manufacturing cycle is a critical concern across various industries, including aerospace, automotive, oiland gas, and civil engineering. Non-Destructive Inspection (NDI) techniques allow for the examination of materials without causing damage or alteration, enabling the early detection of potential issues before materials are utilized in the field. The inspection of fuselage composites presents a particular challenge due to their complex structures, diverse materials, and differences in thickness, making defect detection a challenging yet crucial task. Moreover, defects of various types and causes can emerge across all depths of the material …

The Feasibility Of Motion Tracking Camera System For Magnetic Suspension Wind Tunnel Tests, Hisham M. Shehata, David Cox, Mark Schoenenberger, Colin Britcher, Eli Shellabarger, Timothy Schott, Brendan Mcgovern

Mechanical & Aerospace Engineering Faculty Publications

The Entry Systems Modeling (ESM) Program at NASA has actively participated in the re-development of the Magnetic Suspension Balance System (MSBS) at the six-inch subsonic wind tunnel at NASA Langley Research Center. This initiative aims to enhance the MSBS system's capabilities, enabling the testing of stingless entry vehicle models at supersonic speeds. To achieve this, control algorithms are required to ensure magnetic levitation control and stability for models during free-oscillation dynamic responses. Currently, the system relies on electromagnetic position sensors to provide real-time 3 degrees of freedom control of a rigid body. While this approach has proven successful for subsonic …

Analysis And Detection Of Cyber Attacks In Multi Vehicle Systems Using Macroscopic Models, Abhishek Kashyap

Mechanical and Aerospace Engineering Dissertations - Archive

The study of potential cyber-attacks in different domains is an active area of research. Given that systems are becoming more and more interconnected, cyber physical systems that operate infrastructure and/or plants can make these assets more vulnerable and open to different attack vectors. The primary focus of this research is the modeling, analysis and detection of cyber-attacks on platoons of autonomous cars and swarms of UAVs. In this work, we consider scenarios wherein an attacker may hack into a subset of vehicles in a multi-vehicle system and make subtle modifications in their parameters. Due to the interconnected nature of the …

Advancements In Elliptic Mesh Redistribution And Automated Overset Grid Generation For Computational Fluid Dynamics, Chase Ashby

Theses and Dissertations--Mathematics

Automated and robust structured curvilinear overset grid generation remains a significant challenge for the application of computational fluid dynamics. This thesis intro- duces a specialized anisotropic Mach cone aligned adaptation algorithm for low-boom simulations and an automated procedure for generating structured curvilinear overset grids for immersed boundary simulations. Results demonstrate that anisotropic mesh adaptation can reduce computational resource usage by over 50% while maintaining sonic boom prediction accuracy across the entire sonic boom domain compared to user-constructed Mach cone aligned grids. The proposed immersed overset grid gen- eration procedure eliminates the need for complex surface generation algorithms, producing grids suitable …

Applications Of Ai/Ml In Maritime Cyber Supply Chains, Rafael Diaz, Ricardo Ungo, Katie Smith, Lida Haghnegahdar, Bikash Singh, Tran Phuong

School of Cybersecurity Faculty Publications

Digital transformation is a new trend that describes enterprise efforts in transitioning manual and likely outdated processes and activities to digital formats dominated by the extensive use of Industry 4.0 elements, including the pervasive use of cyber-physical systems to increase efficiency, reduce waste, and increase responsiveness. A new domain that intersects supply chain management and cybersecurity emerges as many processes as possible of the enterprise require the convergence and synchronizing of resources and information flows in data-driven environments to support planning and execution activities. Protecting the information becomes imperative as big data flows must be parsed and translated into actions …

Fundamentals Of Sustainability, Eva Maleviti

Publications

Fundamentals of Sustainable Aviation is the frst textbook to survey the critical feld of sustainability within the aviation industry. Taking a systems thinking approach, it presents the foundational principles of sustainability and methodically applies them to diferent aviation sectors. Opening with the basics of sustainability, emphasising the Sustainable Development Goals, the book then considers the environmental, economic and social dimensions of aviation. The following chapters apply these insights to aviation design, supply chains, operations, maintenance and facilities. The fnal chapter examines the concept of resilience in sustainable aviation. Overall, the textbook shows how future sustainability can be achieved by making …

Three-Dimensional Laser-Assisted Printing Of Structures From Nanoparticles, Heng Pan, Chinmoy Podder, Wan Shou, Xiaowei Yu

Patents

A method for manufacturing a component comprising bombarding nanoparticles in a dispersion with a laser to transform the ligand and cause the nanoparticles to drop out of the dispersion and deposit onto a substrate; and bombarding additional nanoparticles in the dispersion with the laser to transform the ligand and cause the nanoparticles to drop out of the dispersion and deposit onto the nanoparticles previously deposited out of the dispersion.

L∞ Bounds For Transient Growth In Repetitive And Iterative Learning Control Systems, Douglas A. Bristow, John R. Singler

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper revisits the problem of large transient growth in Iterative Learning Control (ILC) and Repetitive Process Control (RPC) systems. In ILC and RPC problems a process is repeated iteratively, with new control calculations occurring in between each iteration. Large transient growth refers to the propensity of some control algorithms to grow error exponentially before eventually converging. While robust monotonic convergence algorithms (in which monotonic convergence is guaranteed usually in exchange for a small loss in performance) have largely eliminated the concern for large transient growth in ILC, similar results cannot always be obtained in RPC. The emergence of additive …

Speculative Anisotropic Mesh Adaptation On Shared Memory For Cfd Applications, Christos Tsolakis, Nikos Chrisochoides

Computer Science Faculty Publications

Efficient and robust anisotropic mesh adaptation is crucial for Computational Fluid Dynamics (CFD) simulations. The CFD Vision 2030 Study highlights the pressing need for this technology, particularly for simulations targeting supercomputers. This work applies a fine-grained speculative approach to anisotropic mesh operations. Our implementation exhibits more than 90% parallel efficiency on a multi-core node. Additionally, we evaluate our method within an adaptive pipeline for a spectrum of publicly available test-cases that includes both analytically derived and error-based fields. For all test-cases, our results are in accordance with published results in the literature. Support for CAD-based data is introduced, and its …

Autonomous Strike Uavs In Support Of Homeland Security Missions: Challenges And Preliminary Solutions, Meshari Aljohani, Ravi Mukkamala, Stephan Olariu

Computer Science Faculty Publications

Unmanned Aerial Vehicles (UAVs) are becoming crucial tools in modern homeland security applications, primarily because of their cost-effectiveness, risk reduction, and ability to perform a wider range of activities. This study focuses on the use of autonomous UAVs to conduct, as part of homeland security applications, strike missions against high-value terrorist targets. Owing to developments in ledger technology, smart contracts, and machine learning, activities formerly carried out by professionals or remotely flown UAVs are now feasible. Our study provides the first in-depth analysis of the challenges and preliminary solutions for the successful implementation of an autonomous UAV mission. Specifically, we …

Dynamics Of A 3-D Inlet/Isolator Measured With Fast Pressure-Sensitive Paint, Andrew N. Bustard, Mark E. Noftz, Mitsugu Hasegawa, Hirotaka Sakaue, Joseph S. Jewell, Nicholas J. Bisek, Thomas J. Juliano

Publications

Fast pressure-sensitive paint (PSP) was applied to an inlet/isolator designed using the Osculating Internal Waverider Inlet with Parallel Streamlines (OIWPS) method. The dorsal isolator surface pressure was measured using anodized-aluminum PSP through transparent cast acrylic that makes up the ventral portion of the isolator. Temperature-sensitive paint was utilized to correct for the PSP’s temperature sensitivity. The model was tested under Mach 5.7 flow at Re = 8.5 ×106 /m and 10.2 ×106 /m in the AFOSR–Notre Dame Large Mach-6 Quiet Tunnel (ANDLM6QT) under conventional noise conditions. Flow phenomena, such as shocks originating in the inlet and flow separation at the …

Numerical Study Of Owls' Leading-Edge Serrations, Asif Shahriar Nafi, Nikolaos Beratlis, Elias Balaras, Roi Gurka

Physics and Engineering Science

Owls' silent flight is commonly attributed to their special wing morphology combined with wingbeat kinematics. One of these special morphological features is known as the leading-edge serrations: rigid miniature hook-like patterns found at the primaries of the wings' leading-edge. It has been hypothesized that leading-edge serrations function as a passive flow control mechanism, impacting the aerodynamic performance. To elucidate the flow physics associated with owls' leading-edge serrations, we investigate the flow-field characteristic around a barn owl wing with serrated leading-edge geometry positioned at 20° angle of attack for a Reynolds number of 40 000. We use direct numerical simulations, where …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Accelerating Machine Learning Inference For Satellite Component Feature Extraction Using Fpgas., Andrew Ekblad

Theses and Dissertations

Running computer vision algorithms requires complex devices with lots of computing power, these types of devices are not well suited for space deployment. The harsh radiation environment and limited power budgets have hindered the ability of running advanced computer vision algorithms in space. This problem makes running an on-orbit servicing detection algorithm very difficult. This work proposes using a low powered FPGA to accelerate the computer vision algorithms that enable satellite component feature extraction. This work uses AMD/Xilinx’s Zynq SoC and DPU IP to run model inference. Experiments in this work centered around improving model post processing by creating implementations …

Marss: Multi-Agent Reinforcement Learning For Satellite Swarms, Nicholas J. Yielding

Theses and Dissertations

Multi-agent systems and swarms in spacecraft formation flying are of ever-increasing importance in a contested space environment—use of multiple spacecraft to contribute to a cooperative mission potentially increases positive outcomes on orbit, while autonomy becomes an ever more important requirement to reduce reaction time in dynamic situations and lower the burden on space operators. This research explores difficult swarm Guidance Navigation and Control (GNC) scenarios using Deep Reinforcement Learning (DRL). DRL polices are trained to provide guidance inputs to agents in multi-agent swarm environments for completing complex, teamwork focused objectives in geosynchronous orbit. An example scenario is explored for a …

Flying To Net Zero With Sustainable Atos; Changing Cultures​, Eva Maleviti

Publications

What is Sustainability?

• World Commission on Environment and Development’s (WCED) 1987 Brundtland Report ‘’Our Common Future’’.
• Help world nations towards sustainable development.

17 Sustainable Development Goals

• The start of all industries are the 17 SDGs
• Aviation can address the 15 SDGs
• Net zero target suggest reduction of aviation emissions up to 21.2 Gt CO2

Development Of User Interface And Testing Harness, Jacob Amezquita, William Albertini

College of Engineering Summer Undergraduate Research Program

No abstract provided.

Online Aircraft System Identification Using A Novel Parameter Informed Reinforcement Learning Method, Nathan Schaff

Doctoral Dissertations and Master's Theses

This thesis presents the development and analysis of a novel method for training reinforcement learning neural networks for online aircraft system identification of multiple similar linear systems, such as all fixed wing aircraft. This approach, termed Parameter Informed Reinforcement Learning (PIRL), dictates that reinforcement learning neural networks should be trained using input and output trajectory/history data as is convention; however, the PIRL method also includes any known and relevant aircraft parameters, such as airspeed, altitude, center of gravity location and/or others. Through this, the PIRL Agent is better suited to identify novel/test-set aircraft.

First, the PIRL method is applied to …

Rigid Body Constrained Motion Optimization And Control On Lie Groups And Their Tangent Bundles, Brennan S. Mccann

Doctoral Dissertations and Master's Theses

Rigid body motion requires formulations where rotational and translational motion are accounted for appropriately. Two Lie groups, the special orthogonal group SO(3) and the space of quaternions H, are commonly used to represent attitude. When considering rigid body pose, that is spacecraft position and attitude, the special Euclidean group SE(3) and the space of dual quaternions DH are frequently utilized. All these groups are Lie groups and Riemannian manifolds, and these identifications have profound implications for dynamics and controls. The trajectory optimization and optimal control problem on Riemannian manifolds presents significant opportunities for theoretical development. Riemannian optimization is an attractive …

Faster, Cheaper, And Better Cfd: A Case For Machine Learning To Augment Reynolds-Averaged Navier-Stokes, John Peter Romano Ii

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years, the field of machine learning (ML) has made significant advances, particularly through applying deep learning (DL) algorithms and artificial intelligence (AI). The literature shows several ways that ML may enhance the power of computational fluid dynamics (CFD) to improve its solution accuracy, reduce the needed computational resources and reduce overall simulation cost. ML techniques have also expanded the understanding of underlying flow physics and improved data capture from experimental fluid dynamics.

This dissertation presents an in-depth literature review and discusses ways the field of fluid dynamics has leveraged ML modeling to date. The author selects and describes …

A Deep Bilstm Machine Learning Method For Flight Delay Prediction Classification, Desmond B. Bisandu, Irene Moulitsas

Journal of Aviation/Aerospace Education & Research

This paper proposes a classification approach for flight delays using Bidirectional Long Short-Term Memory (BiLSTM) and Long Short-Term Memory (LSTM) models. Flight delays are a major issue in the airline industry, causing inconvenience to passengers and financial losses to airlines. The BiLSTM and LSTM models, powerful deep learning techniques, have shown promising results in a classification task. In this study, we collected a dataset from the United States (US) Bureau of Transportation Statistics (BTS) of flight on-time performance information and used it to train and test the BiLSTM and LSTM models. We set three criteria for selecting highly important features …

Pattern-Of-Life Modeling With Automatic Dependent Surveillance-Broadcast (Ads-B), Sarah J. Bolton

Theses and Dissertations

This dissertation and research were sponsored by the Air Force Research Laboratory Layered Sensing Exploitation Branch (AFRL/RYA) to investigate the utility of using the data found within aircraft secondary radar to make predictions about aircraft characteristics and intent. The research focuses on making predictions on aircraft characteristics using only the kinetic data within one type of secondary radar, Automatic Dependent Surveillance-Broadcast (ADS-B), as a surrogate for primary radar. The results from this research provide a means to reduce the reliance on a type of aircraft tracking that is vulnerable to cyber attack and other integrity concerns.

A Comparative Study Of Vinti-Based Orbit Propagation And Estimation For Cubesats In Very Low Earth Orbits, Ethan Michael Senecal

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years, there has been a growing interest in CubeSats and very low Earth orbit (VLEO) space missions. Mission SeaLion, a collaborative CubeSat mission between Old Dominion University, the U.S. Coast Guard Academy, and U.S. Air Force Institute of Technology, planned to launch a 3U CubeSat into VLEO. The VLEO mission is a particularly challenging environment for navigation and orbit propagation because drag introduces a significant perturbation for orbit models such as SGP4. Additionally, mission requirements left no capacity for attitude determination or control, further reducing knowledge of drag behavior of the satellite in flight. This deficiency is a …

Experimental And Computational Aerodynamic Studies Of Axially-Oriented Low-Fineness-Ratio Cylinders, Forrest Miller

Mechanical & Aerospace Engineering Theses & Dissertations

For the successful completion of atmospheric entry, descent, and landing (EDL) missions, a body geometry must be selected which provides favorable dynamic aerodynamic properties. The types of experimental facilities capable of collecting information on these properties are limited; however, their numbers are growing thanks to the continued work by the aerodynamics community. NASA Langley Research Center (LaRC) is conducting dynamic aerodynamic testing using a subsonic magnetic suspension and balance system (MSBS), with the end goal of implementing a supersonic MSBS facility at NASA Glenn Research Center. MSBSs are also currently used at the Institute of Fluid Science (IFS) at Tohoku …

Accurate Covariance Estimation For Pose Data From Iterative Closest Point Algorithm, Rick H. Yuan, Clark N. Taylor, Scott L. Nykl

Faculty Publications

One of the fundamental problems of robotics and navigation is the estimation of the relative pose of an external object with respect to the observer. A common method for computing the relative pose is the iterative closest point (ICP) algorithm, where a reference point cloud of a known object is registered against a sensed point cloud to determine relative pose. To use this computed pose information in downstream processing algorithms, it is necessary to estimate the uncertainty of the ICP output, typically represented as a covariance matrix. In this paper, a novel method for estimating uncertainty from sensed data is …

Kinetic Particle Simulations Of Plasma Charging At Lunar Craters Under Severe Conditions, David Lund, Xiaoming He, Daoru Frank Han

Mathematics and Statistics Faculty Research & Creative Works

This paper presents fully kinetic particle simulations of plasma charging at lunar craters with the presence of lunar lander modules using the recently developed Parallel Immersed-Finite-Element Particle-in-Cell (PIFE-PIC) code. The computation model explicitly includes the lunar regolith layer on top of the lunar bedrock, taking into account the regolith layer thickness and permittivity as well as the lunar lander module in the simulation domain, resolving a nontrivial surface terrain or lunar lander configuration. Simulations were carried out to study the lunar surface and lunar lander module charging near craters at the lunar terminator region under mean and severe plasma environments. …

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

Distributed Control Of Servicing Satellite Fleet Using Horizon Simulation Framework, Scott Plantenga

Master's Theses

On-orbit satellite servicing is critical to maximizing space utilization and sustainability and is of growing interest for commercial, civil, and defense applications. Reliance on astronauts or anchored robotic arms for the servicing of next-generation large, complex space structures operating beyond Low Earth Orbit is impractical. Substantial literature has investigated the mission design and analysis of robotic servicing missions that utilize a single servicing satellite to approach and service a single target satellite. This motivates the present research to investigate a fleet of servicing satellites performing several operations for a large, central space structure.

This research leverages a distributed control approach, …

Mathematical Modeling: Finite Element Analysis And Computations Arising In Fluid Dynamics And Biological Applications, Jorge Reyes

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is often the case when attempting to capture real word phenomena that the resulting mathematical model is too difficult and even not feasible to be solved analytically. As a result, a computational approach is required and there exists many different methods to numerically solve models described by systems of partial differential equations. The Finite Element Method is one of them and it was pursued herein.This dissertation focuses on the finite element analysis and corresponding numerical computations of several different models. The first part consists of a study on two different fluid flow models: the main governing model of fluid …