Aerospace Engineering Commons^™

Using Tank Pressure To Determine The Lift Of A Balloon, Sarah M. Biver

2017 Academic High Altitude Conference

An important aspect of high altitude ballooning is accuracy regarding the calculation of helium inflation in the balloon. If the balloon is over-filled it will increase rapidly in velocity and burst too quickly to record data. If the balloon is under-filled the rate of ascension will be too slow or not at all. This paper highlights the importance of accuracy in helium inflation by examining a method that uses pressure to control the inflation of a high altitude balloon. On every helium tank there is a pressure gauge, which can be used to monitor the change in pressure. Using that …

Brief Look At The Environment Of Space, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Brief Look at the Environment of Space" from June 17, 2015.

Unstandard Cubesat/Pocketqube/Tubesat Deployers, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Unstandard CubeSat/PocketQube/TubeSat Deployers" from April 23, 2015.

Cdtx: Cool Drop Test Experiment, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "CDTX: Cool Drop Test Experiment" from April 7, 2015.

Into Space @ Morehead, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Into Space @ Morehead" from March 26, 2015.

Eps & Batteries, Jeff Kruth

Robert "Bob" Twiggs STEM Education Collection

Notes written by Jeff Kruth on "EPS & Batteries" from March 12, 2015.

Energy Use & Generation, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Energy Use & Generation" from January 19, 2015.

Autonomous Satellite Recovery Vehicle, William Lewis, Devonte Grantham, Francisco Pastrana, Shane Williams, Joshua Moffett, Jessy Law, Kyle Ouellette, Janet Marnane

Aviation / Aeronautics / Aerospace International Research Conference

In collaboration with ERFSEDS, we would like to send a small satellite attached to a quad-copter as the payload for ERFSEDS rocket which will reach an altitude of 10,000 feet. The quad-copters objective will be to collect atmospheric data as it descends. Our plan is to 3-D print a new chassis for the quad-copters electronic components and arms that will allow the quad-copter to fold its arms inwards to meet the required space constraints. After launching the rocket, the satellite will be deployed at the target altitude and begin collecting data once jettisoned from the rocket. Once reaching 2,000 feet …

Thinking Rather Than Panicking About The Current Drone Threat, Tom Foley, Tyrone Groh

Aviation / Aeronautics / Aerospace International Research Conference

Originally titled "UAS Threats in Sport Venues," the authors opted to expand their focus to better to all threats from UASs, and to encourage better preparation for and responses to such threats. Foley and Groh discuss different strategies.

Developing A Robust Balance For Wingsuit Aerodynamic Research, Timothy A. Sestak

Aviation / Aeronautics / Aerospace International Research Conference

Research on wingsuit aerodynamics requires specialized wind tunnel equipment. There is the potential for the relatively large ram-air inflated fabric airfoils being examined to flap and oscillate uncontrolled in the wind tunnel airflow. This chaotic combination of motion and forces could damage the fragile precision balances currently used. Due to the relatively recent development of wingsuit flight as an active sport, there is very little background literature on wingsuit aerodynamics, wingsuit testing, and the equipment and sensors required. A new balance design, able to accurately measure and record basic lift and drag forces while also being able to withstand the …

Insights Into Uas Accidents And Incidents, Robert Joslin

Aviation / Aeronautics / Aerospace International Research Conference

The proliferation and extension of unmanned aircraft systems from military to civil and public use applications has rapidly outpaced the safety analysis that is normally associated with the introduction of a new and novel aircraft. Insights into the types of anomalous events associated with accidents and incidents involving civil and public use unmanned aircraft systems operating in the National Airspace System were derived from an information synthesis of archival publically available reports from the FAA Preliminary Reports of Unmanned Aircraft System Accidents and Incidents database, as recorded in the Aviation Safety Information and Analysis Sharing system. The vast majority of …

Compact Deployable Antenna For Cubesat Units, Sarah Bolton, Dominic Doty, Peter Rivera

Mechanical Engineering

CubeSats are an appealing platform for space exploration due to their low build and launch costs. Due to their small size, communication rates are often severely limited, preventing missions beyond low earth orbit. A low cost, high gain, high frequency antenna is needed to extend the capabilities of CubeSats.

The goal of the project was to design and build an axisymmetric parabolic antenna that could be deployed from a 10cm x 10cm x 15cm (1.5U) volume and operate at Ka band frequencies. The design selected consisted of an expanding perimeter truss supporting a tensioned mesh reflector. The perimeter truss was …

Magnus Effect In Duct Flow, Jesse S. Batko, Cameron W. Clarke, Kenneth W. Smith Jr.

Williams Honors College, Honors Research Projects

The following research paper details the preliminary research carried out by this team. The project was originally conceived to determine if Magnus Lift could be utilized in an unconventional way to assist rockets during takeoff. Several conceptual designs were proposed, but the idea was scrapped when it became apparent that the team would not be able to generate the desired lift without inducing significant amounts of drag and additional weight on a rocket. Instead, the team focused on researching an interesting topic that hasn’t been previously explored: Magnus lift on a cylinder within a duct.

An experimental procedure that could …

Nusat I Participant Photographs, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs of the participants involved with the NUSat I program from January 3, 2013.

Cubesat Remote Data & Comms Transponders 145.825 Mhz, Bob Bruninga, Mirek Kasal, Mike Ruprecht

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Bob Bruninga, Mirek Kasal, and Mike Ruprecht titled "Cubesat Remote Data & Comms Transponders 145.825 MHz" from October 16, 2015.

Magnus Effect In Duct Flow, Cameron W. Clarke, Jesse S. Batko, Kenneth W. Smith Jr.

Williams Honors College, Honors Research Projects

The following research paper details the preliminary research carried out by this team. The project was originally conceived to determine if Magnus Lift could be utilized in an unconventional way to assist rockets during takeoff. Several conceptual designs were proposed, but the idea was scrapped when it became apparent that the team would not be able to generate the desired lift without inducing significant amounts of drag and additional weight on a rocket. Instead, the team focused on researching an interesting topic that hasn’t been previously explored: Magnus lift on a cylinder within a duct. An experimental procedure that could …

Design Of The Structural And Propulsion Systems For The 2015 University Of Akron Rocket Team, Kyle W. Dehoff, Nicholas J. Hrusch

Williams Honors College, Honors Research Projects

No abstract provided.

An Unstandard Way Of Using The Cubesat Standard, Robert J. Twiggs, Amin Djamshidpour, Steward Davis, Ben Malphrus

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs, Amin Djamshidpour, Steward Davis, and Ben Malphrus titled  "An Unstandard way of Using the CubeSat Standard" from November 8, 2014.

Space Hackathon: Magnitude.Io, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Space Hackathon: Magnitude.io" from November 7, 2014.

The History Of Space Debris, Loretta Hall

Space Traffic Management Conference

This paper examines what space debris consists of and where it came from. In 1958, astronomer Clyde Tombaugh published the results of his research into the existence of natural debris near the Earth, concluding that no such debris existed. During the ensuing fifty-five years, man-made debris has been accumulating to the point that it threatens launches, active satellites, and the International Space Station. NASA reported that as of 2013, more than 21,000 pieces the size of a softball or larger were being tracked, as were about 500,000 pieces at least the size of a marble and “many millions” of pieces …

Understanding Orbits: Chapters 4-9, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Understanding Orbits: Chapters 4-9" from October 30, 2014.

Validation Of New Technology Using Legacy Metrics: Examination Of Surf-Ia Alerting For Runway Incursion Incidents, Robert Joslin

Journal of Aviation Technology and Engineering

This study demonstrated an innovative method of utilizing expert raters and actual high-risk incidents to identify shortcomings of using legacy metrics to measure the effectiveness of new technology designed to mitigate hazardous incidents. Expert raters were used to validate the Enhanced Traffic Situational Awareness on the Airport Surface with Indications and Alerts (SURF-IA) model for providing alerts to pilots to reduce the occurrence of pilot deviation type runway incursion incidents categorized as serious (Category A or B) by the legacy FAA/ICAO Runway Incursion Severity Classification (RISC) model. The study concluded that the SURF-IA model did not yield an outcome of …

Cubesats: The Beginning Of Amateur Space Exploration, Tim Debenedictis

Robert "Bob" Twiggs STEM Education Collection

An article by Tim DeBenedictis of the Southern Stars Group titled "CubeSats: the Beginning of Amateur Space Exploration" from August 7, 2014.

Foss Big Data Storage Solution, Gary L. Jaffe

STAR Program Research Presentations

Utilizing the AERO Institute as an IT test bed or “sandbox”, a small-agile development team will design, build, and test a data management storage system to support post processing of archived and in-flight data collected with the Piccolo flight control system and Compact Fiber Optic Sensing System (C-FOSS). Both systems are integrated on the APV3 aircraft, a small remote-operated vehicle. Due to the amount of data collected from C-FOSS, a system will be designed to sort and organize large data sets. An open-source database will be explored as a viable solution to manage large data loads and provide multi-cluster system …

A Study On The Vibrational Performance Characteristics Of An E22 Isolator After Outgassing And Bake-Out, Alma Melendez

Master's Theses

The launch environment experiences many vibration, shock, and acoustic loads. A great concern is the high random vibration levels that can damage components and spacecraft structures, which can cause a mission failure. An effective method of reducing high frequency energy is using isolators. Overall, the need for vibration isolation has been increasing because there has been an increase in the use of mechanisms in which vibrations are prevalent. In addition, there has not been extensive research on the effects of isolators that are outgassed and cured. Therefore, it is important to investigate and understand the vibrational effects on isolators. It …

Lightweight Uav Launcher, Ben Miller, Christian Valoria, Corinne Warnock, Jake Coutlee

Mechanical Engineering

This report discusses the design, construction, and testing of a lightweight, portable UAV launcher. There is a current need for a small team of soldiers to launch a US Marine Tier II UAV in a remote location without transport. Research was conducted into existing UAV launcher designs and the pros and cons of each were recorded. This research served as a basis for concept generation during the initial design development stage. It was required that the design weigh less than 110 lbs, occupy a smaller volume than 48" x 24" 18" in its collapsed state, be portable by a single …

Space Environment, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Space Environment" from May 12, 2014.

Context & Overview, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Context & Overview" from May 12, 2014.

Earth Orbits, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Earth Orbits" from May 12, 2014.

The Next Big Thing Is Small, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "The Next Big Thing is Small" from May 8, 2014.