Aerospace Engineering Commons^™

Enhanced Surface Integrity With Thermally Stable Residual Stress Fields And Nanostructures In Cryogenic Processing Of Titanium Alloy Ti-6al-4v, James R. Caudill

Theses and Dissertations--Mechanical and Aerospace Engineering

Burnishing is a chipless finishing process used to improve surface integrity by severe plastic deformation (SPD) of surface asperities. As surface integrity in large measure defines the functional performance and fatigue life of aerospace alloys, burnishing is thus a means of increasing the fatigue life of critical components, such as turbine and compressor blades in gas turbine engines. Therefore, the primary objective of this dissertation is to characterize the burnishing-induced surface integrity of Ti-6Al-4V alloy in terms of the implemented processing parameters. As the impact of cooling mechanisms on surface integrity from SPD processing is largely unexplored, a particular emphasis …

Urban Flow And Small Unmanned Aerial System Operations In The Built Environment, Kevin A. Adkins

International Journal of Aviation, Aeronautics, and Aerospace

The Federal Aviation Administration (FAA) has put forth a set of regulations (Part 107) that govern small unmanned aerial system (sUAS) operations. These regulations restrict unmanned aircraft (UA) from flying over people and their operation to within visual line of sight (VLOS). However, as new applications for unmanned aerial systems (UAS) are discovered, their capabilities improve, and regulations evolve, there is an increasing desire to undertake urban operations, such as urban air mobility, package delivery, infrastructure inspection, and surveillance. This built environment poses new weather hazards that include enhanced wind shear and turbulence. The smaller physical dimensions, lower mass and …

Determination Of Parameters During Quasi-Steady Stall Maneuver Using Genetic Algorithm, Ambuj Srivastava, Ajit Kumar, Ajoy Kanti Ghosh

International Journal of Aviation, Aeronautics, and Aerospace

The current work offers the determination of longitudinal aerodynamic derivatives during flight manoeuver at angles of attack near the stall. The flight manoeuver near stall is highly non-linear in nature due to separated flow at such elevated angles of attack. Kirchoff’s model for Quasi-Steady Stall Modelling (QSSM) is employed to represent the non-linear nature of aerodynamics during flight manoeuver at elevated angles of attack close to the stall. The Genetic Algorithm (GA) optimized output error method is utilized for estimating the parameters specific to stall characteristics and longitudinal aerodynamics of the ATTAS aircraft. The comparative evaluation of the parameter estimates …

Determination Of Aerodynamic Forces And Control Requirement During Ground Effect, Ambuj Srivastava

International Journal of Aviation, Aeronautics, and Aerospace

The current work delivers the effect of ground proximity on longitudinal aerodynamic forces and the elevator deflection required for trimming the aircraft. The academic understanding states that the with the increasing proximity to the ground,downwash progressively reduces.The methodology adopts the approximation of linear decrement for the estimation of the residual downwash at any height above ground within the unit wingspan. The proposed method utilizes non-dimensional height above ground for the approximation of effective downwash angle in the presence of ground. The approximately predicted effective downwash angle is subsequently utilized to estimate the effect of ground proximity on longitudinal forces, trim …

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …

Effect Of Chemical Reactions On The Fluidic Thrust Vectoring Of An Axisymmetric Nozzle, Rachid Chouicha, Mohamed Sellam, Said Bergheul

International Journal of Aviation, Aeronautics, and Aerospace

Abstract:

During the last years, several thrust control systems of aerospace rocket engines have been developed. The fluidic thrust vectoring is one of them; it is simple in design and offers a substantial gain in weight and in performance. Most of studies related to this device were carried out with cold gas. It’s quite legitimate to expect that the thermophysical properties of the gases may affect considerably the flow behavior. Besides, the effects of reacting gases at high temperatures, under their effects all flow parameters like to vary.

This study aims to develop a new methodology that allows studying and …

Comparison Of Flow Field In The Proximity Of A Single Planar & Wrap-Around Fin, Nayhel Sharma, Palak Saini, Hrishabh Chaudhary, Gurteg Nagi, Rakesh Kumar Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Abstract

This paper analyses the results of the computational analysis between a single planar and a wrap-around fin mounted on a semi-cylindrical body. A free-stream Computational Fluid Dynamics (CFD) model was simulated for both cases in the Mach 0.4-3.0M range at 0°Angle of attack, in which, the behavior of flow around the fin was investigated using a turbulence model of higher order discretization. The post-processing shows all the possible views of the flow dynamics around the fins, as well as the missile body. The aerodynamic drag and the rolling moment characteristics of the planar and the wrap-around fin have been …

Design And Realization Of An Unmanned Aerial Rotorcraft Vehicle Using Pressurized Inflatable Structure, Nirmal Sadasivan

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned aerial rotorcraft vehicles have many military, commercial and civil applications. There is a necessity to advance the performance on several ranges of rotorcraft for using these vehicles successfully in the expanded future roles. A lower flight time, noise disturbance and safety issues remain the key obstacles in increasing the efficiency of the rotorcraft for various applications. This work presents the design and realization of a rotorcraft using pressurized inflatable structure filled with lighter than air gas such as helium or hydrogen to provide lift assistance for the vehicle. Two iterative design procedures were developed for designing the vehicle. One …

Dual Graphene Patch Antenna For Ka Band Satellite Applications, Mohammed Amin Rabah, Mohammed Bekhti

International Journal of Aviation, Aeronautics, and Aerospace

Currently; grapheme offers a new opportunity to use in space technology and this is due to its amazing properties like conductivity, strength, flexibility and transparency which allows us to exploit new generation of ultra-fast nanoscale components; Since future wireless communication techniques are geared towards the use of the high frequency spectrum and many recent research prove this trend. This letter presents a proposal for design of a dual graphene-based antenna to use in new communication techniques in Ka band, where the proposed antenna can work for uplink and dowlink frequencies at same time since it has return loss less then …

Conceptual Design Of Male Uavs, Vincent Spada

Graduate Theses, Dissertations, and Problem Reports (ETD)

The conceptual design process of aircraft involves the creation of a product, in this case UAVS (unmanned aerial vehicles), using the most effective means possible across multiple subdisciplines of Aerospace Engineering. This paper will outline a unique methodology that involves calculating certain design variables such as wing loading, power loading, aspect ratio and cruise altitude in the conceptual design phase for MALE (medium altitude long endurance) UAVs. Aircraft characteristics from MALE UAVs such as the MQ-9 predator and MQ-1 reaper will used for a comparative aircraft study as “jumping off” points in order to carry out the initial calculations. An …

Improving Solder Joints Formed In Microgravity By Use Of Magnetic Soldering Paste Additives, Aaron Dunkle

Graduate Theses, Dissertations, and Problem Reports (ETD)

With the expansion of the space industry, the need for the capability to repair electronics in space grows. Previous researchers have found that soldering in microgravity has yielded joints of poorer quality than those made on Earth, with increased interior porosity. WVU’s microgravity research team (MRT) constructed an experiment to solder onboard a microgravity aircraft to explore this problem and to test a possible solution. MRT’s experiment collected solder samples both in microgravity and a ground test, which were then cross-sectioned to allow the interior porosity of the joints to be studied. This determined that there was an increase in …

Nanosatellite Launch Data-Logger (Sync), Christopher Martin Gerdom

Master's Theses

CubeSat designers are increasingly looking to incorporate delicate structures and optics into their payloads. These delicate payloads, however, may not survive the required absolute-worst-case launch vibration testing needed for flight certification. To help address this problem, and to better match testing conditions to real-world launch environments, this thesis introduces Sync, a compact 1/4U CubeSat payload designed to collect data on the vibrations and thermal environments CubeSats experience inside a deployer on the way to orbit. This data can be used to better understand the launch environment for different vehicles, and help develop new, more realistic testing guidelines that could enable …

L1 Month: Utilizing High Power Rocketry As A Training Tool For Student Organizations, Aaron Hunt, Oakley Copeland, Mckynzie Perry, Benjamin Thomas

Von Braun Symposium Student Posters

No abstract provided.

How Spaceflight Affects The Detachment Of Zinc Whiskers, Kayla Capitan

Von Braun Symposium Student Posters

No abstract provided.

Utilization Of Aerospace Industry Design Processes For A Small Scale Student Project, Austin Click

Von Braun Symposium Student Posters

No abstract provided.

Techedsat 7 And 8-Nasa Missions For Earth Observation, Andrew Pham

STAR Program Research Presentations

Big results can come from small satellites, and Technology Educational Satellite 8 or TES-8 is the latest small satellite in the TechEdSat series from NASA Ames Research Center. TechEdSat is a collaborative program, in which advanced university students have a chance to work directly with researchers on NASA Space Projects. Thanks to the assistance of students from several universities around the country every year, TechEdSat has helped NASA develop Nano-satellite technologies and evaluate new ideas for future spacecraft. TES-8 is the eighth satellite of the continuing TechEdSat series. On December 01, 2018 TES-8 followed a Commercial Resupply Service mission to …

Space Architecture Assessment Using System-Of-Systems Methodologies, Liam Durbin, Cesare Guariniello, Daniel Delaurentis

The Summer Undergraduate Research Fellowship (SURF) Symposium

As technologies in the space exploration community are further developed, mission complexity and the associated risks have become greater. Dozens of complicated system interactions may result in unexpected, potentially dangerous emergent behaviors. Early efforts are underway by NASA to map potential system architectures (collections of systems which fulfill design requirements) for future human space exploration missions. However, current mission complexity requires the determination of emergent behaviors, as well as time requirements, and safety levels of complicated space exploration architectures, which current analysis methods in use cannot address. To that end, a newer technique has been developed—System Operability Dependency Analysis (SODA). …

Book Review: Fundamentals Of International Aviation, Alan Bender

International Journal of Aviation, Aeronautics, and Aerospace

Not applicable.

The Pocketqube Standard: Issue 1, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A report titled "The PocketQube Standard Issue 1" published on June 7, 2018.

An Evaluation Of Ultrasonic Shot Peening And Abrasive Flow Machining As Surface Finishing Processes For Selective Laser Melted 316l, Rhys Gilmore

Master's Theses

Additive Manufacturing, and specifically powder bed fusion processes, have advanced rapidly in recent years. Selective Laser Melting in particular has been adopted in a variety of industries from biomedical to aerospace because of its capability to produce complex components with numerous alloys, including stainless steels, nickel superalloys, and titanium alloys. Post-processing is required to treat or solve metallurgical issues such as porosity, residual stresses, and surface roughness. Because of the geometric complexity of SLM produced parts, the reduction of surface roughness with conventional processing has proven especially challenging. In this Thesis, two processes, abrasive flow machining and ultrasonic shot peening, …

The Design And Implementation Of A Supersonic Indraft Tube Wind Tunnel For The Demonstration Of Supersonic Flows, Daniel Kenneth Johnson

Master's Theses

Historically, the endeavor of scale testing flight vehicles at supersonic Mach numbers, especially for long durations, has required the development of closed-loop wind tunnels, which are extremely expensive both to build and operate due to the high complexity and incredible power required to drive such a system. The intermittent blowdown wind tunnel, indraft tunnel, and shock tunnel have alleviated many of these cost requirements to some degree, whilst facilitating testing at very high Mach numbers and enthalpies; however, these systems require the handling of gases at pressures and temperatures that can be prohibitive for many university settings. The Ludwieg tube …

Determining Feasibility Of A Propulsionless Microsatellite Formation Flight Mission, Aaron Levis

Master's Theses

Benefits of developing missions with multiple formation flying spacecraft as an alternative to a traditional monolithic vehicle are becoming apparent. In some cases, these missions can lower cost and increase flexibility among other situational advantages. However, there are various limitations that are imposed by these missions that are centered on the concept of maintaining the necessary formation. One such limitation is that of the propulsion system required for each spacecraft. To mitigate the complexity and mass of the onboard propulsion, the pairing of electromagnetic actuators and differential drag to replace the functionality of a propulsive system is investigated. By using …

The Measurement Of The Adhesion Of Glaze Ice., Andrew Hardesty Work Jr.

Electronic Theses and Dissertations

Icing is a lethal and costly aviation hazard affecting aircraft of all sizes ranging from small UAVs to large commercial craft such as the Boeing 787, resulting in hundreds of deaths over the last century and resulting in billions of dollars of economic impact. Three predominant types of icing, namely, airframe icing, engine icing, and rotorcraft icing, dominate aircraft icing research. Each type poses unique challenges. In the case of rotor icing, attention needs to give to the rotating environment with large oscillatory loads and icing conditions. In the case of airframe icing, special attention needs to be paid to …

Investigation Of Deep Neural Network Image Processing For Cubesat Size Satellites, Adam D. Braun

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Adam D. Braun on April 30, 2018.

How Does Spaceflight Affect The Detachment Of Zinc Whiskers?, Kayla Capitan

Research Horizons Day Posters

No abstract provided.

Sysml Output Interface And System-Level Requirement Analyzer For The Horizon Simulation Framework, Viren Kishor Patel

Master's Theses

Model-Based Systems Engineering in industry has been constantly increasing its presence within the aerospace industry. SysML is one such MBSE tool that shows complex system organization and relationships. The Horizon Simulation Framework is another MBSE tool, created by Cal Poly students, that gives users the ability to run “day-in-the-life” simulations of systems. Finding a way to link these two tools could allow systems engineers to reap the benefits of both.

This thesis investigates the background and design process involved with developing the code that can convert an output file generated in SysML, into a format specifically made for the Horizon …

Nanosatellite Space Experiment, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A report written by Professor Bob Twiggs titled "Nanosatellite Space Experiment" from March 30, 2018.

Scheduling Tool For The Nevada Test And Training Range, Miguel J. Macias

Theses and Dissertations

Presently, the 57th Wing Scheduler at Nellis AFB schedules daily mission requests to the Nevada Test and Training Range (NTTR) airspace manually. The process is time consuming and may lead to suboptimal range resource allocations. The goal of this study is to provide the scheduler with an automated scheduling approach that will improve range scheduling efficiency. The tool developed uses range request data from units at Nellis AFB to produce daily mission schedules for a month long scheduling horizon with Microsoft VBA code and a commercial Integer Program (IP) solver. Under our current understanding of scheduler priorities, we formulate the …

Comparison Of Traditional Versus Cubesat Remote Sensing: A Model-Based Systems Engineering Approach, Daniel L. Cipera

Theses and Dissertations

This thesis compares the ability of both traditional and CubeSat remote sensing architectures to fulfill a set of mission requirements for a remote sensing scenario. Mission requirements originating from a hurricane disaster response scenario are developed to derive a set of system requirements. Using a Model-based Systems Engineering approach, these system requirements are used to develop notional traditional and CubeSat architecture models. The technical performance of these architectures is analyzed using Systems Toolkit (STK); the results are compared against Measures of Effectiveness (MOEs) derived from the disaster response scenario. Additionally, systems engineering cost estimates are obtained for each satellite architecture …

Assessment And Comparison Of Aviation Manufacturing Industries Throughout Mexico And Brazil, Omar E. Morsi, Kelly A. Whealan-George, Aaron D. Clevenger

International Journal of Aviation, Aeronautics, and Aerospace

This literature review serves to provide insight and understanding in regards to the evolving aviation manufacturing industry throughout the globe and more specifically, Mexico and Brazil. Increased demand for aircraft units both in the commercial and private sectors have led to unprecedented expansions in aircraft manufacturing across the industry. In order to illuminate certain potentials and current growth levels of such industries, this review will delve into an array of information and specifications in regards to economic, political, and cultural influences throughout both Mexican and Brazilian markets respectively. In conclusion, the review will identify the transformation of an aviation manufacturing …