Aerospace Engineering Commons^™

Generative Adversarial Networks For Dimensionality Reduction In Evtol Aircraft Takeoff Trajectory Optimization, Samuel Sisk, Farzaam Khorasani-Gerdehkouhi, Abdulaziz Abutunis, K. Chandrashekhara, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft play a key role in urban air mobility (UAM), which aims to alleviate traffic congestion in urban areas. Despite their value, eVTOL aircraft suffer from battery energy consumption, which affects their range and endurance in real world flight tasks. Especially, the takeoff process has been identified for excessive power demands. Multidisciplinary analysis and optimization manage to discover optimal takeoff trajectories with minimum energy consumption while balancing multidisciplinary trade-offs, such as short distance takeoff and passengers' comfort. However, conventional parametrization methods (such as B-spline curves) leverage an empirically high-dimensional design space to include real …

Novel Design And Fabrication Of A High-Speed Transient Heat Flux Sensor For Application To Rotating Detonation Engines, Zachary Todd Tallman

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rotating detonation engine (RDE) combustion systems have been a topic of interest in the pressure gain combustion community for their benefits over traditional gas turbine engine combustors. However, cooling requirements for these engines are significantly higher and less predictable than those of non-detonating engines. To understand and quantify the high-speed heat transfer dynamics within an RDE, a novel high-frequency heat flux sensor is presented. This study aims to design a robust, single-sided sensor that can withstand the high temperature and harsh environment of an RDE for extended durations. Screen printing is used to deposit a layered, platinum-yttria-stabilized zirconia (YSZ) film …

Reactive Model-Free Control For Underactuated Vehicles Operating In Resource-Constrained Environments, Austin Lane Sponaugle

Graduate Theses, Dissertations, and Problem Reports (ETD)

Buoyancy-driven, underactuated vehicles offer a compelling solution for long-duration autonomous operations in constrained environments. By leveraging buoyancy to generate lift, these vehicles can remain aloft for extended periods with minimal power requirements, making them well-suited for applications in atmospheric monitoring, planetary exploration, and communications. However, their limited actuation authority, strong coupling with environmental forces, and operating domains introduce significant control challenges, including nonlinearity, sensitivity to external disturbances, and limited observability.

This work investigates the design and implementation of lightweight, reactive model-free control strategies that enable robust autonomy in such constrained settings. A digital Extremum Seeking Controller (ESC) is first implemented …

Review: Dielectric Barrier Discharge Plasma Actuators For In-Flight Applications, Sabeel Saleem Mohammed

Anthós

Dielectric barrier discharge (DBD) is a phenomenon observed when high voltage is passed through a dielectric barrier at high frequencies. Current DBD plasma actuators (PAs) excel at laminar fluid boundary layer control but suffer from limited momentum flux and fluid mechanic inefficiencies. In this article, Mohammed analyzes previous discourse on DBD PAs and offers directions for future research and potential DBD PA applications. Previous work on DBD PAs documented thrust generation at high voltages and frequencies, thrust in varying fluid compositions, and vortex generation. However, certain arrangements hinder flow magnitudes, limiting the use of multiple DBD PAs in close proximity. …

Bio-Inspired Airfoil Design Based On The Aerodynamic Analysis Of A Bird Feather Microstructure, Jack C. Ihm

College of Graduate Studies: Theses & Dissertations

This study investigates the aerodynamic effects of a bio-inspired airfoil design based on the microstructure of a secondary feather from a female wood duck. The research hypothesized that incorporating barbs and barbules into an airfoil design would modify boundary layer behavior by introducing localized flow disturbances. To test this, a bio-inspired airfoil was developed by integrating the microstructure into a NACA 0012 airfoil and analyzed using computational fluid dynamics (CFD) simulations at angles of attack of 0°, 5°, 10°, and 15°. The results showed that the bio-inspired airfoil influenced boundary layer behavior, producing localized flow disturbances near x/c = 0.7 …

Development Of An Quadcopter Unmanned Aerial Vehicle For Atmospheric Remote Sensing, Omar J. Addasi

Dissertations and Theses

This paper explores the development of a quadcopter unmanned aerial vehicle (UAV, a.k.a. drone) for atmospheric remote sensing of temperature, pressure, humidity, and PM2.5 particulate matter quantities. A 3-D printed drone body is designed and flight tuning is performed. An optimal length for an upward extending mast for the drone body is determined. Low cost, lightweight sensors are compared against higher precision sensors in both static and dynamic conditions. In addition, an initial investigation into the design of a pressure sensor based anemometer is performed.

Optimizing Hypersonic Scramjets: A Numerical Study Of Fuel Type And Cavity Flameholder Design Impacts On Supersonic Combustion, Delaney Baumberger

Electronic Theses and Dissertations

This thesis presents recommendations for optimizing hypersonic scramjets via a numerical study focusing on fuel type and cavity flameholder design and the impacts they have on supersonic combustion. The research is divided into two main investigations aimed at improving scramjet engine efficiency using two distinct geometrical configurations, a square cavity engine and an axisymmetric cavity engine. Each configuration is examined under Mach 2 inflow conditions to assess the role of geometric variation and fuel selection on combustion stability, flameholding, and overall performance. The first study focuses on a comparative assessment of hydrogen and ethylene as scramjet fuels to evaluate their …

Ground Testing Of A Magnetic-Electrostatic Separation System For Lunar Regolith Beneficiation, Peter Bachle, Charles Wood, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

The separation of lunar regolith by mineral composition and size category is useful forin-situ resource utilization (ISRU). The research presented herein discusses the designing and development of equipment that has the potential to separate lunar regolith into aluminum, iron-titanium, and magnesium-iron ores. Along with the metal ore separation, this equipment shows the potential to separate regolith by size categories. The combined effect of these separation methods generates output that is valuable to subsequent use in metal and oxygen extraction, additive manufacturing, and regolith sintering processes. The designed equipment uses a dual-strength magnet system with N42 and N52 neodymium magnets for …

Anisotropic And Temperature-Tunable Second-Harmonic Vortex Generation In Ferroelectric Nbocl2 Holograms, Jayanta Deka, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Optical vortex beams with helical phase fronts have immense potential to enhance data capacity due to the unbounded values of orbital angular momentum. Chip-scale platforms for producing vortex beams are of paramount importance for a variety of applications. On the other hand, 2D materials with unique optical properties are essential for developing multifunctional ultrathin photonic devices. Here, anisotropic and temperature-tunable second-harmonic vortex beam generation is demonstrated with ultrathin ferroelectric niobium oxide dichloride (NbOCl₂) fork holograms. The polarization-resolved Raman measurements are performed on the NbOCl₂ crystal to understand the anisotropic behavior of the Raman modes. It is demonstrated …

Optimizing Uav Swarm Deployment For Efficient Communication Signal Strength Alignment In Disaster Scenarios, Mina Khalilzadeh Fathi, Chaoying Pei

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In disaster scenarios, establishing reliable communication infrastructure is critical, and unmanned aerial vehicle (UAV) swarms offer a promising solution as temporary base stations. This study models communication demand in disaster-affected areas by applying Gaussian kernels to building data, forming a spatial demand distribution. Signal strength is estimated using the normalized inverse Free Space Path Loss (FSPL) to account for realistic attenuation. To guide UAV placement, we extract high-demand regions from the demand distribution using a gradient-based thresholding method. Based on this information, we develop a greedy algorithm to iteratively position UAVs for optimal coverage in areas with the greatest communication …

An Adaptive Sampling Strategy On Optimal Takeoff Trajectory Prediction Of Electric Drones, Dheeraj Paramkusham, Samuel Sisk, Jiachen Wang, Shuan Tai Yeh, Xiaosong Du, Nathan Roberts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft transforms future transportation systems by alleviating transportation congestion on the ground. This eVTOL technique possesses unique features, including reduced noise, low pollutant emissions, efficient operating costs, and flexible maneuverability. Meanwhile, battery consumption poses critical challenges to flight task duration. Thus, optimal takeoff trajectory design is essential due to immense power demands during eVTOL takeoffs. Conventional design optimization, however, iteratively evaluates high fidelity simulation models, making the design process computationally intensive. In this work, we implement a machine learning-enabled inverse mapping optimization concept, i .e., directly predicting optimal design based on design requirements (including …

Lunar Payload Logistics: Advancing Autonomous Control For Lunar Surface Transporter Vehicles, Liam Murray

Electronic Theses and Dissertations

No abstract provided.

Additive Manufacturing Of Multifunctional Materials And Composites, John Michael Pappas

Doctoral Dissertations

"This research focused on developing fundamental knowledge of process-material interactions for additive manufacturing of multifunctional materials that are highly desirable in high-tech industries for potential weight and space savings. Multifunctional materials are very sensitive to defects, which severely hinder performance. Thus, defect formation was systematically studied to develop strategies and methodologies to efficiently fabricate high-performance materials and composites. Blown-powder-based laser additive manufacturing of transparent spinel ceramics was investigated to reduce porosity and cracking, defects that hindered transparency and mechanical properties. A systematic study of processing parameters revealed that laser power and powder flow rate had the largest effects on defect …

Improving Neural Network Efficiency With Multi-Fidelity And Dimensionality Reduction Techniques, Vignesh Sella, Thomas O'Leary-Roseberry, Xiaosong Du, Mengwu Guo, Joaquim R.R.A. Martins, Omar Ghattas, Karen Willcox, Anirban Chaudhuri

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Design problems in aerospace engineering often require numerous evaluations of expensive to-evaluate high-fidelity models, resulting in prohibitive computational costs. One way to address the computational cost is through building surrogates, such as deep neural networks (DNNs). However, DNNs may only be an effective surrogate when sufficient evaluations of the high-fidelity model are required such that the up-front training cost is amortized, or in situations that require real-time responses (such as interactive visualizations). Typically, the data requirements for adequately accurate training of DNNs are often impractical for engineering applications. To alleviate this issue, the proposed work utilizes output dimensionality reduction along …

High-Order Dynamic Mode Decomposition For Multidimensional Harmonic Retrieval, Yanming Zhang, Steven Gao, Lijun Jiang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Estimating channel parameters such as azimuth, elevation, Doppler shift, and delay is a key challenge in wireless communication, often formulated as a multidimensional harmonic retrieval (MHR) problem. To address this, we propose a high-order dynamic mode decomposition (HODMD) framework for robust frequency estimation from high-dimensional signals in noisy environments. The HODMD approach combines high-order singular value decomposition (HOSVD) to decompose tensor data into a core tensor and mode matrices, with dynamic mode decomposition (DMD) to extract frequencies from the imaginary parts of the DMD eigenvalues. Simulation examples validate the effectiveness of the proposed method, demonstrating its efficiency in solving MHR …

Performance Evaluation And Multiphysics Process Modeling Of Carbon Fiber Reinforced Thermoset Composites Using Microwave And Autoclave, Nayan Pundhir, Patrick Schwartzkopf, K. Chandrashekhara, Logan Wilcox, Kristen M. Donnell, Jim Lua, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this study, IM7/Cycom 5320-1 unidirectional prepreg has been utilized to manufacture 16-layer laminated composites: a symmetric cross-ply ([0°/90°]4s) and a quasi-isotropic ([45°/90°/−45°/0°]2s) configuration. Microwave and autoclave curing processes have been employed to manufacture the laminated composites. The manufactured composite cure was assessed using differential scanning calorimetry (DSC). The quality and porosity of the microwave-cured parts were juxtaposed to those of autoclave-cured parts through optical microscopy and micro-computed tomography (micro-CT) scanning. Mechanical characterization of the microwave-cured panels was conducted using uniaxial tensile and flexural tests, with results juxtaposed to autoclave-cured samples. Experimental characterization revealed that the microwave-cured parts exhibited nearly …

Design And Testing Of An Intrusive Arm For Supersonic Flow Sampling, Caleb Roberts, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Intrusive probes are critical tools in supersonic wind tunnel testing, enabling direct measurement of flow properties such as pressure and heat flux. To support these measurements, a single-axis intrusive arm was designed and implemented in the Missouri S&T Supersonic Wind Tunnel. The system is designed to maintains precise probe positioning, while withstanding the aerodynamic loads, and preserving a dynamic seal between the test section and ambient environment. Its modular design accommodates a range of probe types for various research applications. This paper presents the design methodology, including structural, mechanical, and aerodynamic considerations, and details the integration process. System performance was …

Physics-Constrained Generative Artificial Intelligence For Rapid Takeoff Trajectory Design, Samuel Sisk, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The urban air mobility (UAM) industry is rapidly growing to alleviate regional transportation congestion. Electric vertical takeoff and landing (eVTOL) aircraft plays a critical role in this growth due to their efficiency and reduced operating cost. However, excessive energy demands by the takeoff phase impact the practicality of the aircraft. Conventional multidisciplinary analysis and optimization (MDAO) identifies a minimum energy trajectory but can be computationally intensive due to iteratively evaluating high-fidelity simulation models. In addition, complex constraints in practical MDAO pose crucial challenges to the already demanding process. Surrogate models enable efficient design optimization, but complex constraints could prohibit surrogate-based …

Versatile Injector Platform: A Modular Design For Supersonic Flow Research, Connor Bell, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fuel–air mixing remains a critical challenge in the development of high-speed air-breathing propulsion due to the extremely short residence times in supersonic combustors. Experimental studies are essential to investigate the underlying mixing mechanisms, but they require injection systems that can deliver repeatable and controlled flow conditions. In this work, we present the design of a modular strut-type injection platform developed for the Missouri S&T Supersonic Wind Tunnel. In its initial configuration, the platform features a planar trailing-edge slit to generate a two-dimensional jet and includes interchangeable trailing-edge modules to support a wide range of geometries and flow-control strategies. Designed with …

Few-Shot Learning-Enhanced Tiered Path Planning For Mars Rover Navigation, Ziyi Wang, Di Yu, Mina Khalilzadeh Fathi, Chaoying Pei

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Path planning for Mars rovers presents significant challenges due to the diverse terrain, ranging from easily navigable areas to hazardous zones. Traditional methods typically classify terrain simply as passable or impassable, failing to account for the nuances of more moderately challenging areas. In this paper, we introduce a tiered terrain-aware path planning strategy, employing few-shot learning to classify and segment Martian terrain into levels of difficulty. The few-shot learning model, trained on Earth, is sent to the rover, enabling real-time processing of images from satellites or helicopters. The flexibility of few-shot learning, which requires minimal data and training time, enables …

Gas-Generating Reactive Materials: Design, Evaluation And Effect Of Morphology On Their Ignition And Combustion, Purvam Mehulkumar Gandhi

Dissertations

This work investigates optimizing gas-generating reactive materials, focusing on particle morphology's effect on ignition and combustion behavior. Metal-based gas-generating energetic materials (EMs) are promising alternatives to replace traditional CHNO compounds. Design of advanced metal-based EMs requires consistent ways of evaluating how their characteristics affect their ignition and combustion. Many relevant evaluation approaches exist; however, the results may be difficult to compare directly across different studies. Commonly, experimentalists ignite metal-based EMs in enclosed chambers and report pressures, P. However, direct comparison of these pressures is hindered by variations in the chamber volume, V, and the EM mass, m. To standardize the …

Qualitative Analysis Of The Circuits Of Autonomous Inverters With Shut-Off Valves, Shukhrat Badreddinovich Umarov

Technical science and innovation

The article presents the results of a qualitative analysis of circuits of autonomous current and voltage inverters with cut-off valves; the influence of the charge value of the switching capacitor in parallel and series equivalent circuits on the restoration of the switching properties of the thyristors of the inverter power circuit is studied. It is shown that due to the energy periodically accumulated in the inductive elements of the load, the voltage on the switching capacitor in the cut-off state is greater than in a conventional parallel autonomous current inverter. This circumstance ensures an increase in the switching stability of …

Evaluation Of Impact Energy In Composites Using Acoustic Emission Sensing Technique, Li Ai, Tanner Mesaric, Sydney Flowers, Sydney Houck, Joshua Widawsky, Paul Ziehl

Faculty Publications

A major challenge faced by composite materials is impact, which can result in unexpected damage and degradation. Impact events can cause significant structural damage that may not be immediately visible, leading to a reduction in the material’s mechanical properties and overall performance. This paper presents an impact assessment method using acoustic emission (AE) sensing technology. The primary goal of this approach is to determine the extent of impact damage on composite components by analyzing AE signals produced under operating stress conditions. An advanced algorithm is proposed to predict the probability that the damage falls into various damage categories, providing a …

Development Of A Model For Fire Spread In Low-Gravity Conditions, Kathleen Martinus

The Journal of Purdue Undergraduate Research

No abstract provided.

Understanding Confusion: A Case Study Of Training A Machine Model To Predict And Interpret Consensus From Volunteer Labels, Ramanakumar Sankar, Kameswara Mantha, Cooper Nesmith, Lucy Fortson, Shawn R. Brueshaber, Candice Hansen-Koharcheck, Glenn Orton

Michigan Tech Publications

Citizen science has become a valuable and reliable method for interpreting and processing big datasets, and is vital in the era of ever-growing data volumes. However, there are inherent difficulties in the generating labels from citizen scientists, due to the inherent variability between the members of the crowd, leading to variability in the results. Sometimes, this is useful — such as with serendipitous discoveries, which corresponds to rare/unknown classes in the data — but it might also be due to ambiguity between classes. The primary issue is then to distinguish between the intrinsic variability in the dataset and the uncertainty …

Mae Enewsbrief July-Sept 2024, Department Of Mechanical And Aerospce Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Hyperspectral Imaging For Temperature Measurements Of Hot Spots In Shocked Plastic-Bonded Explosives, Dhanalakshmi Sellan, Siva Kumar Valluri, Dana D. Dlott

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hot spots are formed when energetic microstructures are shocked, and they play a critical role in shock sensitivity. It is important to know both the time-dependent size and temperature of the hot spots, in order to generate a kinetic model to describe reaction growth in plastic-bonded explosives (PBX). Here we use a recently developed technique where PBX is fabricated in the form of a thin wafer, embedded within a transparent polymer binder, and shocked with a laser-launched flyer plate that produces pressures of about 30 GPa range. In this method, every crystal of the cyclotetramethylene-tetranitramine (HMX)-based PBX can be observed …

Microstructured Microstructure: Effects Of Concentration Variations On Shock Initiation Of Hmx-Based Plastic Explosives, Dana D. Dlott, Lawrence Salvati, Siva Kumar Valluri

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We studied shock-compressed plastic-bonded explosives (PBX) consisting of HMX (cyclotetramethylene-tetranitramine) with PDMS (poly-dimethylsiloxane) binder, where we varied the HMX weight percent (wt%) up to a maximum of 60 wt%. In this lower-concentration regime, HMX particle clustering causes the PBX structure to consist of HMX clusters and PDMS islands. Structural analysis by optical microscopy allowed us to compute a radial correlation function that gives the mean distance from an average HMX particle to the nearest polymer island. Short-duration 20 GPa shocks (4 ns) created hot spots, and time-resolved thermal emission was used to obtain the growth rate of the subsequent deflagration. …

Accelerating Shock-Driven Reactions In Metal Nanocomposites, Siva Kumar Valluri, Edward L. Dreizin, Dana D. Dlott

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Metal powders are sought as energetic additives to conventional explosives. However, due to their sluggish reaction kinetics with external gaseous oxidizers, pure metals are replaced with metallic composites with intimately mixed condensed phase oxidizers prepared by arrested reactive milling (ARM). Such composites can be initiated by non-thermal, mechanical means; through shear mixing of fuel and oxidizer under a shock compressive load. Since the ARM preparatory technique allows for tuning multiple powder attributes such as fuel/oxidizer of interest, their degree of mixing, amount of oxidizer, particle porosity, among others, a parametric study is crucial in identifying suitable traits for fast reactions …

Multiphysics Modeling And Experimental Validation Of High-Strength Steel In Laser Powder Bed Fusion Process, M. Rangapuram, S. Babalola, J. W. Newkirk, L. N. Bartlett, F. W. Liou, K. Chandrashekhara, Stephen R. Cluff

Materials Science and Engineering Faculty Research & Creative Works

Laser powder bed fusion (LPBF) is a subset of the additive manufacturing process in which a laser beam selectively joins the metal powder into a desired part in a sequential layer process. Owing to its complex nature of rapid heating and cooling of the melt pool, there is a need to understand the melt pool behavior and its effects on the final manufactured part. a densely packed powder bed is highly desirable for fabricating a superior part using the LPBF process. in this work, discrete element model was used to generate powder beds with realistic powder properties and various factors …