Aerospace Engineering Commons^™

Configuration Studies Of Electrostatic And Magnetostatic Active Space Radiation Shielding, Trac K. Nguyen

Electrical & Computer Engineering Theses & Dissertations

Developing successful and optimal solutions for mitigating the hazards of radiation in deep space is critical for the success of deep-space long duration explorations, including mission to the Moon, Mars and beyond. A recent report (Tripathi et al., 2008) had explored the feasibility of using electrostatic shielding in conjunction with state-of-the-art materials shielding technologies.

In this thesis research, we study the active electrostatic shielding strategy and examine a hybrid configuration that utilizes both electrostatic and magnetostatic fields. The main advantages of this system are shown to be: (i) much lower magnetic fields that could be below the thresholds set for …

A Resistance Based Structural Health Monitoring System For Composite Structure Applications, Dennis N. Boettcher

Master's Theses

This research effort explored the possibility of using interwoven conductive and nonconductive fibers in a composite laminate for structural health monitoring (SHM). Traditional SHM systems utilize fiber optics, piezoelectrics, or detect defects by nondestructive test methods by use of sonar graphs or x-rays. However, these approaches are often expensive, time consuming and complicated.

The primary objective of this research was to apply a resistance based method of structural health monitoring to a composite structure to determine structural integrity and presence of defects.

The conductive properties of fiber such as carbon, copper, or constantan - a copper-nickel alloy - can be …

Flexible Circuits For Aerospace Applications With Special Emphasis On Rf Connectors, Abhishek Nareshraj Singh

Graduate Theses and Dissertations

The current work focused on the study of flexible electronic circuits for use in aerospace applications with emphasis on RF Connectors. The electrical and mechanical performance of the flexible circuits was studied and compared to a standard coaxial cable for feasibility study in avionics space. Also, Anisotropic Conductive Films (ACF) are studied for connecting the flexible RF connectors and their performance studied for electrical and mechanical behavior with change in bonding parameters.

High-Throughput Rear-Surface Drilling Of Microchannels In Glass Based On Electron Dynamics Control Using Femtosecond Pulse Trains, Lan Jiang, Pengjun Liu, Xueliang Yan, Ni Leng, Chuancai Xu, Hai Xiao, Yongfeng Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study proposes a rear-surface ablation enhancement approach to fabricate high-aspect-ratio microchannels by temporally shaping femtosecond laser pulse trains. in the case study of K9 glass, enhancements of up to a 56 times higher material removal rate and a three times greater maximum drilling depth are obtained by the proposed method, as compared with conventional femtosecond laser drilling at the same processing parameters. the improvements are due to the changes of photon-electron interactions by shaping femtosecond pulse train, which can effectively adjust the photon absorption and localized transient material properties by changing electron dynamics such as free electron densities. © …

Modeling, Identification, Validation And Control Of A Hybrid Maglev Ball System, Ahmed Elhussein E. Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, the electrodynamics of a single axis hybrid electromagnetic suspension Maglev system was modeled and validated by applying it to a single axis hybrid maglev ball experiment. By exploring its linearized model, it was shown that the single axis hybrid Maglev ball has inherently unstable dynamics. Three control scenarios were explored based on the linearized model; (1) Proportional, Deferential (PD) control, (2) Proportional, Deferential, Integral (PID) and (3) PID controller with pre-filtering. This thesis has shown that a PID controller with a pre-filtering technique can stabilize such a system and provide a well-controlled response.

A parametric system identification …

Reliable Software Updates For On-Orbit Cubesat Satellites, Sean Fitzsimmons

Master's Theses

CubeSat satellites have redefined the standard solution for conducting missions in space due to their unique form factor and cost. The harsh environment of space necessitates examining features that improve satellite robustness and ultimately extend lifetime, which is typical and vital for mission success. The CubeSat development team at Cal Poly, PolySat, has recently redefined its standard avionics platform to support more complex mission capabilities with this robustness in mind. A significant addition was the integration of the Linux operating system, which provides the flexibility to develop much more elaborate protection mechanisms within software, such as support for remote on-orbit …

Day/Night Band Imager For A Cubesat, Eric Stanton

Electrical Engineering

Day/Night Band (DNB) earth sensing and meteorological systems like the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) provide visible wavelength imagery 24 hours a day that is used primarily for cloud imaging in support of weather forecasting. This paper describes a compact push-broom imager that meets low light imaging requirements for DMSP OLS and the NOAA/NASA Joint Polar Satellite System (JPSS) as documented in the Integrated Operational Requirements Document [1] (IORD) including the imager design, system level concepts of operation for data collection, radiometric and spatial calibration, and data transmission to Earth. This small, lightweight imager complies with …

Dynamics And Control Of Satellite Relative Motion In Proximity Operations, Mohamed Elsayed Aly Abd Elaziz Okasha

Mechanical & Aerospace Engineering Theses & Dissertations

In this dissertation, the development of relative navigation, guidance, and control algorithms of an autonomous space rendezvous and docking system are presented. These algorithms are based on innovative formulations of the relative motion equations that are completely explicit in time. The navigation system uses an extended Kalman filter based on these formulations to estimate the relative position and velocity of the chaser vehicle with respect to the target vehicle and the chaser attitude and gyro biases. This filter uses the range and angle measurements of the target relative to the chaser from a simulated LIDAR system, along with the star …

Fadec Advances Allow Better Engine Performance, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Aerial Deployable Autonomous Solar Powered Glider, Brandon Groshong, Jacob Ohana

Aerospace Engineering

Awareness of green solutions to powered flight is a new trend taking the Aerospace Industry by storm. One particular application that shows high promise is that of photovoltaics on small UAV-type aircraft to help extend flight time. The purpose of this report is to document both research and experimentation performed on a small RC aircraft in order to better understand the electrical requirements of such a device. Using that research, speculation on how it can be used to design a mobile Aerial Deployable Autonomous Solar Powered Glider will be performed. Technologies such as CIGS solar cells and Lithium Polymer batteries …

Object Retrieval From Secure Unknown Interior Spaces Using Autonomous Unmanned Aerial Vehicles, John Levous, Julie Hoven, Victor Habgood, Abdulrahman Alotaibi, Brandon Ordway, Garibe Mohammed-Jones, Haole Guo, Filip Cuckov, Chung-Hao Chen

Electrical & Computer Engineering Faculty Publications

This paper describes an autonomous unmanned aerial vehicle (UAV) designed to participate in the 23rd annual International Aerial Robotics Competition. The UAV is equipped with onboard sensors and a Harvard architecture 8-bit RISC microcontroller to monitor and locally control its flight telemetry. Additional sensors (and an additional microcontroller) are used for detecting and mapping of structural and environmental objects while the UAV is in flight. The microcontrollers are interfaced with wireless communication modules for transmitting flight telemetry and structural/environmental data to a ground control station that sends the UAV command and control signals required for the mission objectives. The UAV …

Highly Sensitive Refractive Index Optical Fiber Sensors Fabricated By A Femtosecond Laser, Jinpeng Yang, Lan Jiang, Sumei Wang, Qianghua Chen, Benye Li, Hai Xiao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Highly sensitive and robust refractive index (RI) fiber sensors are proposed, which are based on concatenating two micro air-cavities. the micro air-cavities embedded in the fiber along the core axis are fabricated by combining the techniques of femtosecond laser micromachining and arc fusion splicing. the full width at half-maximum (FWHM) of an attenuation peak of a sensor in air is 0.048 nm, and the extinction ratio is ∼15 dB. When the diameter of the cavity is slightly larger than the fiber core diameter, the sensor is highly sensitive to external RI changes. a high sensitivity of 172.4 nm/refractive index unit …

Navigation And Position Determination With A Multicarrier Modulation Signal Of Opportunity, Richard K. Martin, Jamie S. Velotta, John F. Raquet

AFIT Patents

A multicarrier modulation position determination method that includes deploying at least one known receiver with a known location and a second receiver with an unknown location. At least two signals of opportunity with different locations are obtained by both the receiver and the second receiver. The signals having a plurality of block data, the block data having block boundaries. The block boundaries including a beginning block boundary and an end block boundary. The block data further including a cyclic prefix at the beginning block boundary. Acquiring a plurality of data samples for at least a portion of the block data …

Vibration-Based Health Monitoring Of Multiple-Stage Gear Train And Differential Planetary Transmission Involving Teeth Damage And Backlash Nonlinearity, Andrew Patrick Sommer

Master's Theses

The objective of this thesis is to develop vibration-based fault detection strategies for on-line condition monitoring of gear transmission systems. The study divides the thesis into three sections. First of all, the local stresses created by a root fatigue crack on a pinion spur gear are analyzed using a quasi-static finite element model and non-linear contact mechanics simulation. Backlash between gear teeth which is essential to provide better lubrication on tooth surfaces and to eliminate interference is included as a defect and a necessary part of transmission design. The second section is dedicated to fixed axis power trains. Torsional vibration …

Femtosecond Laser Fabricated All-Optical Fiber Sensors With Ultrahigh Refractive Index Sensitivity: Modeling And Experiment, Lan Jiang, Longjiang Zhao, Sumei Wang, Jinpeng Yang, Hai Xiao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

All-optical fiber sensors based on ultracompact fiber inline Mach-Zehnder interferometer (MZI) are fabricated by side-ablating a Ushape microcavity in a single-mode optical fiber with the fiber core partially removed using femtosecond (fs) laser pulses, in which the two light paths are accordingly formed in the remaining D-type fiber core and the U-shape microcavity. Beam propagation method (BPM) analysis is utilized to illustrate the dependences of good transmission spectra on parameters including the ablation depth, ablation length and the refractive index of Ushape microcavity, which gives some guidelines to optimize parameters for fs laser micromachining and predicts RI (refractive index) sensitivities …

Comparison Of A High Purity Germanium Gamma Ray Spectrometer And A Multidimensional Nai(T1) Scintillation Gamma Ray Spectrometer, Greg Stratton

Aerospace Engineering

This report compares two different gamma ray spectrometers in terms of performance, operation, and apparatus and also investigates the design and integration challenges of using gamma ray spectrometers in space. The first spectrometer is a one-dimensional high purity germanium (HPGe) spectrometer and the second is a multidimensional NaI(Tl) scintillation spectrometer (MGRS). The key results show that the HPGe exhibits 15 to 27 times better energy resolution than the MGRS, but the MGRS is 52 times more sensitive and removes 177 % more of the background radiation.

The Tracking Performance Of Distributed Recoverable Flight Control Systems Subject To High Intensity Radiated Fields, Rui Wang

Electrical & Computer Engineering Theses & Dissertations

It is known that high intensity radiated fields (HIRF) can produce upsets in digital electronics, and thereby degrade the performance of digital flight control systems. Such upsets, either from natural or man-made sources, can change data values on digital buses and memory and affect CPU instruction execution. HIRF environments are also known to trigger common-mode faults, affecting nearly-simultaneously multiple fault containment regions, and hence reducing the benefits of n-modular redundancy and other fault-tolerant computing techniques. Thus, it is important to develop models which describe the integration of the embedded digital system, where the control law is implemented, as well …

Design, Fabrication, And Testing Of An Electromagnetic Rail Gun For The Repeated Testing And Simulation Of Orbital Debris Impacts, Jeff Maniglia, Jordan Smiroldo, Alex Westfall, Guy Zohar

Aerospace Engineering

An Electromagnetic Railgun (EMRG) was designed, built, and tested, capable of firing a projectile a 1 gram projectile at 650 m/s muzzle velocity. The EMRG utilizes an injector, a high voltage power supply, a capacitor bank, inductors and rails. The injector fires 2300 psig Nitrogen gas into the system to provide an initial velocity. The high voltage power supply charges the capacitor bank. The capacitor bank discharges the electric potential built up through the projectile while inside the rails in order to create the EMRG’s force. The inductors are used to pulse form the capacitor bank in order to get …

Imu Integration To The Cal Poly Spacecraft Attitude Dynamics Simulator Power System, Wayland Chan

Electrical Engineering

The Cal Poly Spacecraft Attitude Dynamics Simulator mimics the rotation dynamics of a spacecraft in orbit and acts as a test bed for spacecraft attitude control system development and demonstration. Prior to this project, the simulator measured its attitude dynamics from a total of seven sensors mounted on to the platform, including three micro-electromechanical system (MEMs) gyroscopes, and four motor encoders. This project entails the installation of an LN-200 high performance gyroscope, which will provide a greater measure of accuracy. The goal of this project is to design a power circuit that will integrate the LN-200 inertial measurement unit onto …

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms.  However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space.  Robust particle damping technology offers a potential solution, driving the need for microgravity characterization.   A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources.  This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

Electric Motor & Power Source Selection For Small Aircraft Propulsion, Jeremy Fehrenbacher, David L. Stanley, Mary E. Johnson Dr., Jeffrey Honchell

Purdue Polytechnic Directed Projects

The research conducted in this project is on electrical propulsion in aviation. A Cessna 172K aircraft with a Lycoming O-320-E2D piston engine serves as a baseline measurement. Investigation of the components required for electrical flight is performed, and components are selected based on market availability and operational performance criteria.

This research focuses on electrical propulsion in the aviation industry, and is tailored to aircraft within the General Aviation sector leading to the following research question: Can current electric motor and battery technologies conceptually support flight operations for a Cessna 172K in terms of aircraft performance criteria?

The results explore the …

Investigation And Comparison Of Proportional Navigation Guidance And Beam Rider Guidance, Ertac Olgun

Electrical & Computer Engineering Theses & Dissertations

Air defense has an increasing importance in today's wars. To gain the advantage in air combat, pursuit interceptor aircraft, which use Air-to-Air Missiles (AAMs), have become more and more significant. However, these are not sufficient alone. The importance of Surface-to-Air Missiles (SAMs) also can not be ignored in air defense.

SAMs can use different tactical navigation guidance methods. Of these, two of the more important guidance methods are Proportional Navigation Guidance and Beam Rider Guidance, which are investigated in this thesis. To understand the idea better, a brief description and discussion of missiles are provided. Parts of the guided missiles …

Electronic Warfare By Using Unmanned Aerial Vehicles, Aydin Meric

Electrical & Computer Engineering Theses & Dissertations

Technology continues to evolve rapidly by the day. Developments in technology should be followed closely if a country wants to become more powerful. Nowadays nobody can afford to ignore the importance of Electronic Warfare and Unmanned Aerial Vehicles (UAV) in military applications. Both of them play a crucial role in military operations that they can change the course of a war.

There are different kinds of Electronic Warfare methods that can be applied according to the situations and any evolving circumstances. In the beginning Electronic Warfare was used mainly for defensive purposes, but these days Electronic Warfare is used for …

High Frequency Direction Finding Using Structurally Integrated Antennas On A Large Airborne Platform, Clair F. Corbin

Theses and Dissertations

Estimating the angle of arrival (AOA) of a high frequency (HF) signal, 2-32 MHz, is challenging, especially if the antenna array is installed on a platform with dimensions on the order of one wavelength. Accurate AOA estimates are necessary for search and rescue operations and geolocating RF emitters of interest. This research examines the performance of a direction finding (DF) system using structurally integrated (SI) antennas installed on an airborne platform which allows the aircraft structure to become the receiving element. Two simulated DF systems are analyzed at 4 and 11 MHz. The relationship between the number of SI antennas …

Signals Of Opportunity Navigation Using Wi-Fi Signals, Wilfred E. Noel

Theses and Dissertations

Since GPS is generally limited to areas with clear sky view, additional methods of navigation are currently being explored. This thesis explores navigation using Signals of Opportunity(SoOP). The signals chosen for evaluation in this thesis are the common Internet IEEE 802.11a/g signals, or Wi-Fi. This thesis presents SoOP navigation based on cross-correlations of received data from multiple Wi-Fi stations. It shows the effectiveness of the methods using collected Wi-Fi signals in a real-world environment. By using simple statistical representations of collected data in large groups, or windows, cross-correlation calculations can produce timing offsets between simulated stations. The timing offsets, or …

Effects Of Cyclic Prefix Jamming Versus Noise Jamming In Ofdm Signals, Amber L. Scott

Theses and Dissertations

Signal jamming of an orthogonal frequency-division multiplexing (OFDM) signal is simulated in MATLAB. Two different means of jamming are used to see, which is a more efficient way to disrupt a signal using the same signal power. The first way is a basic additive white Gaussian noise (AWGN) jammer that equally jams the entire signal. The second way is an AWGN jammer that targets only the cyclic prefix (CP) of the signal. These two methods of jamming are simulated using different channel models and unknowns to get varying results. The three channel models used in the simulations are the no …

Nanostructured Substrate With Nanoparticles Fabricated By Femtosecond Laser For Surface-Enhanced Raman Scattering, Yukun Han, Zhi Liang, Huilai Sun, Hai Xiao, Hai-Lung Tsai

Electrical and Computer Engineering Faculty Research & Creative Works

A Simple and Fast Method to Fabricate Nanostructured Substrates with Silver Nanoparticles over a Large Area for Surface-Enhanced Raman Scattering (SERS) is Reported. the Method Involves Two Steps: (1) Dip the Substrate into a Silver Nitrate Solution for a Few Minutes, Remove the Substrate from the Solution, and Then Air Dry and (2) Process the Silver Nitrate Coated Substrate by Femtosecond (Fs) Laser Pulses in Air. the Second Step Can Create Silver Nanoparticles Distributed on the Nanostructured Surface of the Substrate by the Photoreduction of Fs Multiphoton Effects. This Study Demonstrates that an Enhancement Factor (EF) Greater Than 5x105, Measured …

A Midsummer Night’S Dream (With Flying Robots), Robin Murphy, Dylan Shell, Amy Guerin, Brittany Duncan, Benjamin Fine, Kevin Pratt, Takis Zourntos

School of Computing: Faculty Publications

Seven flying robot “fairies” joined human actors in the Texas A&M production of William Shakespeare’s A Midsummer Night’s Dream. The production was a collaboration between the departments of Computer Science and Engineering, Electrical and Computer Engineering, and Theater Arts. The collaboration was motivated by two assertions. First, that the performing arts have principles for creating believable agents that will transfer to robots. Second, the theater is a natural testbed for evaluating the response of untrained human groups (both actors and the audience) to robots interacting with humans in shared spaces, i.e., were believable agents created? The production used two types …

Aether, Thomas Cameron, Kristine Colton, Daren Childers

Electrical Engineering

Aether is a RC-style autonomous air vehicle that utilizes GPS positioning along with a wireless communication system to achieve a computer-controlled flight.

This report will incorporate the acquisition, design, integration, implementation and testing phases of the UAV development. Furthermore a discussion of troubleshooting as well as improvements for future projects will be included.

A Shock Tube Technique For Blast Wave Simulation And Studies Of Flow Structure Interactions In Shock Tube Blast Experiments, Nicholas N. Kleinschmit

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Improvised explosive devices (IED’s) are widely used against US and allied forces fighting in Iraq and Afghanistan. Exposure to IED blast may cause blast-induced traumatic brain injury (bTBI). The injury mechanisms are however not well understood. A critical need in bTBI-related research is the ability to replicate the loading conditions of IED blast waves in a laboratory environment. In this work, experimental studies have been carried out to explore the use of the shock tube technique for generating air shock waves that mimic the temporal and spatial characteristics of free-field blast waves and to investigate the blast wave-test sample interactions …