Engineering Commons^™

Metabolic Comparison Of Wild-Type And Transgenic Synechocystis Pcc 6803 Cyanobacteria, Ian A. Mcluckey, John A. Morgan, Joel Yu King Hing

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Calvin-Benson (CBB) cycle is an essential part of nature. This phenomenon allows carbon molecules in carbon dioxide from the atmosphere to be converted into useful energy in the form of sugars. Cyanobacteria are single-celled organisms capable of utilizing energy from sunlight to drive this cycle and are also readily engineered. In hopes of improving this cycle, we compared a wild-type version of the Synechocystis PCC6803 cyanobacteria to an engineered version overexpressing the enzyme FBA (fructose-biphosphate aldolase), called 70 glpX, to deduce how the overexpressing strain is able to be more photosynthetically efficient. To do this, comparative metabolomics were done …

A Comparative Analysis Of Feed And Environmental Factors On Broiler Growth In The United States, Alexandra Gulli

Graduate Theses and Dissertations

Broiler production in the United States has become an important industry within the last half century. As the demand for poultry continues to increase and the concern of climate change also increases, it will become an important part of the industry to become more sustainable. This study uses a feed optimization model, a broiler growth model, and a life cycle assessment (LCA) to determine how feed ingredients and the barn environment can affect the broiler’s growth and production emissions. A multi-criteria ration optimization model is used to produce feeds based on carbon footprint and cost. A growth model is used …

Kettle Cooling And Sustainability Project, Nico Degiorgio

BioResource and Agricultural Engineering

A particular frozen food processing facility uses a once-through cooling process to bring their kettle-cooked product’s temperature down from nearly boiling temperatures to the eighty degree Fahrenheit range. This process is water intensive and facility managers are seeking to reduce their potable water consumption. Sales engineers from Air Treatment Corporation, an HVAC&R manufacturers’ rep, initiated a number of meetings to propose heat rejection solutions and illustrate their associated payback potentials.

This report contains methods of analyzing a food production process, the technical sales process, thermodynamic principles, refrigeration technologies, and the application of technical knowledge to provide a long-term, system solution. …

Adaptive Light Dimmer, Jonathan Sato, William Xiong

Electrical Engineering

This project, the Adaptive Light Dimmer for the DC House, senses a room's light content and adjusts a lamp's light intensity accordingly, thus regulating the room's light content. The device is designed to work with renewable energy sources such as wind and solar energy. This would be useful in less developed countries where AC electricity is not well spread and renewable DC, such as solar, can be better utilized. It functions by using the TSL2561 light sensor to sense light, ATTiny85 microcontroller to output PWM to the LED driver, LT3795 LED driver to output current to an LED and LT3014 …

Dc-Dc Converter Control System For The Energy Harvesting From Exercise Machines System, Alexander Sireci

Master's Theses

Current exercise machines create resistance to motion and dissipate energy as heat. Some companies create ways to harness this energy, but not cost-effectively. The Energy Harvesting from Exercise Machines (EHFEM) project reduces the cost of harnessing the renewable energy. The system architecture includes the elliptical exercise machines outputting power to DC-DC converters, which then connects to the microinverters. All microinverter outputs tie together and then connect to the grid. The control system, placed around the DC-DC converters, quickly detects changes in current, and limits the current to prevent the DC-DC converters and microinverters from entering failure states.

An artificial neural …

Implementing Net Zero Energy Into The Construction Innovations Center, Marlo Arleen Castro

Construction Management

As the environmental status of our planet declines, it is becoming more and more important for the construction industry to adapt. Leadership in Energy and Environmental Design (LEED) is becoming an unspoken requirement for all new and tenant improvement construction, and now, with the goal of Net Zero Energy (NZE) for all new commercial buildings by 2030, NZE is becoming the way of the future. As of late, California Polytechnic State University in San Luis Obispo (Cal Poly) has made grand efforts to retrofit several of the older buildings on its campus in order to achieve LEED certification. One of …

Living Tiny Legally, James G. Rollin

Senior Honors Projects, 2010-2019

Over the last 40 years, the average new United States house has increased in size by more than 1,000 square feet, from an average size of 1,660 square feet in 1973 (earliest year available from the Census Bureau) to 2,687 square feet last year (Perry, 2016). In that same time period, there was a 91% increase in home square footage per inhabitant and a decrease in average household size. According to the U.S. Census Bureau, the average home in the United States costs approximately $358,000 to build, an increase of roughly $200,000 since 1998. Meanwhile, the average annual income in …

Do Single-Use Medical Devices Containing Biopolymers Reduce The Environmental Impacts Of Surgical Procedures Compared With Their Plastic Equivalents?, Scott R. Unger, Troy A. Hottle, Shakira R. Hobbs, Cassandra L. Thiel, Nicole Campion, Melissa M. Bilec, Amy E. Landis

Publications

Background: While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy.

Methods: A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women’s Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is …

Structural Competency And Environmental Soundness Of The Recycled Base Materials In North Texas, Mohammad Faysal

Civil Engineering Dissertations - Archive

Aggregates, which are derived from natural resources, are the most important raw materials used in pavement construction; however, depletion of the natural resources, increasing labor costs, and environmental concerns have led us to look for alternatives. Recycled materials, such as recycled crushed concrete aggregate (RCCA) and reclaimed asphalt pavement (RAP), can be used as an alternative to natural aggregates and can be obtained from construction of newer structures and demolition of existing structures, such as buildings, bridges, pavement, etc. Recycled materials can reduce the cost, depletion of natural resources, and construction debris. The properties of recycled materials are source-dependent, which …

A Tool To Evaluate Sustainability Of Pavement Maintenance Projects., Yibo Zhang

Electronic Theses and Dissertations

Pavement maintenance activities are widely regarded to be critical elements during pavement life cycle, different maintenance techniques have been used to restore or extend the service lives of pavements. However, the existing maintenance practices on pavement system have problems that impair the economic benefits, disturb the natural environment, and somewhat ignore the needs from stakeholders. To minimize these negative impacts, sustainability is an ideal way because it addresses the problems under Triple Bottom Line (TBL, refers to economy, environment, and society). Sustainability analysis within transportation or pavement industry has been studied in different countries, but the concept of sustainable pavement …

Development And Degradation Analysis Of Novel Micro And Nanostructured Transition Metal Oxide (Tmo) Anodes For Aqueous Sodium Ion Batteries., Santanu Mukherjee

Electronic Theses and Dissertations

One of the primary motivations driving battery technology research is the need to develop cleaner and more efficient energy storage systems. The portable electronics industry has developed exponentially, especially over the last couple of decades and therefore the importance of efficient electrochemical energy storage systems cannot be overstated. Li-ion batteries have been the predominant rechargeable energy in use, however, they have their own particular drawbacks viz. flammability of the electrolyte, expensive mining of the Li metal etc. This is where the importance of Na-ion batteries lie. This research focuses on using existing transition metal oxides (TMOs) and tuning their crystal …

A Data-Driven Approach For Benchmarking Energy Efficiency Of Warehouse Buildings, Wee Leong Lee, Kar Way Tan, Zui Young Lim

Research Collection School Of Computing and Information Systems

This study proposes adata-driven approach for benchmarking energy efficiency of warehouse buildings.Our proposed approach provides an alternative to the limitation of existingbenchmarking approaches where a theoretical energy-efficient warehouse was usedas a reference. Our approach starts by defining the questions needed to capturethe characteristics of warehouses relating to energy consumption. Using an existingdata set of warehouse building containing various attributes, we first cluster theminto groups by their characteristics. The warehouses characteristics derivedfrom the cluster assignments along with their past annual energy consumptionare subsequently used to train a decision tree model. The decision tree providesa classification of what factors contribute to different …

Optimization Of Roadway Electrification Integrating Wireless Power Transfer: Technoeconomic Assessment And Lifecycle Analysis, Braden J. Limb

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Electric vehicles are the main technology currently being pursued to reduce dependence on fossil fuels in the transportation sector. These vehicles provide both reduced greenhouse gas emissions and decreased operating costs when compared to conventional internal combustion vehicles, while providing the flexibility to use both renewable and fossil energy. However, these vehicles have seen limited consumer adoption due to their large purchase prices and limited driving range. Both purchase price and driving range are related to the large onboard battery systems required for electric vehicle travel.

One solution to decrease dependence on large battery systems has focused on charging vehicles …

Next Steps For Mentoring Program, Patrick Gray

Sustainability and Connectivity

This file provides a jump-off position for students in the fall 2017 semester who want to continue work toward a mentoring program.

Dayton Regional Green Meeting Notes, Tim Leonard, Adam Foster, Abigail Lisjak

Sustainability and Connectivity

These are notes from our meeting with Lamees Mubaslat from Dayton Regional Green. She is really excited about more mentoring programs in Dayton.

Mentoring Brochure: Longer Version, Tim Leonard, Abigail Lisjak, Adam Foster

Sustainability and Connectivity

This is a mentoring brochure we created to show different organizations our ideas. This is the longer of two versions.

Mentoring Brochure: Shorter Version, Tim Leonard, Abigail Lisjak, Adam Foster

Sustainability and Connectivity

We made these brochures to talk to different organizations about our thoughts and ideas. There are two iterations of this. This one has less words.

Light Olefin Production By Cracking Nannochloris Oculata Microalgae Using Aluminosilicate Catalysts, Gaurav Goyal

USF Tampa Graduate Theses and Dissertations

The global demand and sustainability concerns for producing light olefins encouraged researchers to look for an alternative and sustainable feedstock. Alkenes, such as ethene, propene and butene, are known as light olefins. Olefins are the backbone of the chemical industry because they serve as the chemical building blocks for the manufacture of polymers, fibers, and numerous organic chemicals. Feedstocks such as naphtha, natural gas and liquefied petroleum gas (LPG) are currently used for producing light olefins, but they are non-renewable and hence unsustainable. In contrast, biomass as a potential feedstock for the production of fuels and chemicals is renewable. Microalgae, …

Investigation Into Feasibility Of Off-Grid Small Dwelling In Slo County, Sam Labberton

Construction Management

The trend towards green, sustainable living has grown more and more in the housing industry each year since before the turn of the century; solar in the last decade alone has grown by 60% (http://www.seia.org/research-resources/solar-industry-data). Living on a grid that runs on unclean sources of energy already has led us into an environmental disaster some call irreversible. This paper takes a detailed look into the feasibility of a small, off-grid, dwelling that utilizes modern technology in order to live more modestly. In conjunction with great advancements in solar technology along with energy storage such as deep cycle lead-acid batteries, on-site …

The Effect Of Biocomposite Material In A Composite Structure Under Compression Loading, Benjamin Andrew Sweeney

Master's Theses

While composite structures exhibit exceptional strength and weight saving possibilities for engineering applications, sometimes their overall cost and/or material performance can limit their usage when compared to conventional structural materials. Meanwhile ‘biocomposites’, composite structures consisting of natural fibers (i.e. bamboo fibers), display higher cost efficiency and unique structural benefits such as ‘sustainability’. This analysis will determine if the integration of these two different types of composites are beneficial to the overall structure. Specifically, the structure will consist of a one internal bamboo veneer biocomposite ply; and two external carbon fiber weave composite plies surrounding the bamboo biocomposite. To acquire results …

Embedding Systems Thinking Into Ewb Project Planning And Development: Assessing The Utility Of A Group Model Building Approach, Kimberly Pugel, Jeffrey P. Walters

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Amongst growing sociotechnical efforts, engineering students and professionals both in the international development sector and industry are challenged to approach projects more holistically to achieve project goals. Engineering service learning organisations must similarly adapt their technological projects to consider varying cultural and economic structures, ensuring more resilient social progress within development efforts. In practice, systems thinking approaches can be utilised to model the social, economic, political, and technological implications that influence the sustainability of an engineering project. This research assesses the utility of integrating systems thinking into Engineers Without Borders (EWB) project planning and development, thereby improving project impact and …

Working With Complexity: A Participatory Systems-Based Process For Planning And Evaluating Rural Water, Sanitation And Hygiene Services, Jeffrey P. Walters, Kate Neely, Karla Pozo

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Individuals working within the water, sanitation and hygiene for development (WASH) sector grapple daily with complex technical, social, economic, and environmental issues that often produce unexpected outcomes that are difficult to plan for and resolve. Here we propose a method we are calling the ‘Participatory Systems-based Planning and Evaluation Process’ (PS-PEP) that combines structural factor analysis and collaborative modeling to guide teams of practitioners, researchers, and other stakeholders through a process of modeling and interpreting how factors systemically and dynamically influence sustained access to WASH services. The use and utility of the PS-PEP is demonstrated with a regional team of …

Life Cycle Assessment (Lca) Of Ore Transportation Route Alternatives For Eagle Mine, Soumith Kumar Oduru

Dissertations, Master's Theses and Master's Reports

Transportation sector at large is a major consumer of fossil fuels and constitutes more than a quarter of the global greenhouse gas emissions. When making infrastructure route and mode choice decisions for new freight-oriented projects, it is important that environmental and emissions considerations are included as an integral part of the selection process. Emissions from freight transportation projects related to mining and natural resource industry are especially critical, as they involve high volumes and tonnages often in pristine environments. The most logical time for emissions analysis is during modal and route analysis that are often conducted in the planning stage …

What Green Design Activities And Mindsets Drive Innovation And Sustainability In Student Teams?, Jeremy Faludi, Alice Agogino, Sara Beckman, Alastair Isles

Dartmouth Scholarship

What sustainable design practices can also drive innovation, and what practices do people value? Previous analysis of sustainable design methods, and the opportunism of designers generally, has suggested that design methods should actually be examined at the level of their component activities and mindsets, as each of these provides different advantages that designers could mix and match. This study performed workshops of three sustainable design methods for a total of 327 students, then surveyed students about which activities or mindsets within each design method drove innovation value, sustainability value, and any other value. The design methods tested were The Natural …

Review Of Sustainability Issues In Non-Traditional Machining Processes, Kamlakar Rajurkar, H. Hadidi, J. Pariti, G. C. Reddy

Department of Mechanical and Materials Engineering: Faculty Publications

Non-traditional machining processes (such as EDM and ECM) provide alternatives or sometimes the only alternative in generating highly complex 3-D features in very difficult-to -machine materials. This paper reviews recently published work on sustainability issues related to these processes. For example in Electrochemical machining (ECM) the effect of sludge generation and selection of dielectric in Electrodischarge machining (EDM) need to be investigated from the sustainability point of view. All processes need to be studied not only for resulting productivity and accuracy but also their environmental impact during product generation and usage. This paper addresses process mechanisms, surface integrity, sensing and …

Landfill Elevated Internal Temperature Detection And Landfill Fire Index Assessment For Fire Monitoring, Aurora Musilli

Theses and Dissertations

Landfill fires are becoming a real threat to both people and environment due to lack of predictions and control methods. Processing of the infrared band from level-1 satellite images was employed and decades worth of archived data from USGS Earth Explorer databases were analyzed to obtain surface temperature values of Atlantic Waste Landfill, Virginia and Bridgeton Landfill, Missouri. Multitemporal thermal maps and frequency of maxima analysis maps of these two landfills showed the hotspots spreading through the waste site. A Landfill Fire Index (LFI) was created by investigating eight factors that give information about the hazardousness of the landfill conditions …

Nuclear Insurance Subsidies Cost From Post-Fukushima Accounting Based On Media Sources, John Laureto, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Quantification of nuclear liability insurance is difficult without arbitrary liability caps; however, post-mortem calculations can be used to calculate insurance costs. This study analyzes the Fukushima (Daiichi) nuclear power plant disaster to quantify the cost per unit electricity ($/kWh) of nuclear energy from the lifetime of the plant after accounting for the true cost of the liability needed to cover the damages from the nuclear disaster determined from news reports. These costs are then compared to the cost of electricity currently paid by Japanese consumers, and then are aggregated to determine the indirect subsidy for nuclear power providers in both …

More Than Target 6.3: A Systems Approach To Rethinking Sustainable Development Goals In A Resource-Scarce World, Qiong Zhang, Christine Prouty, Julie B. Zimmerman, James Mihelcic

Civil and Environmental Engineering Faculty Publications

The 2030 Agenda for Sustainable Development outlines 17 individual Sustainable Development Goals (SDGs) that guide the needs of practice for many professional disciplines around the world, including engineering, research, policy, and development. The SDGs represent commitments to reduce poverty, hunger, ill health, gender inequality, environmental degradation, and lack of access to clean water and sanitation. If a typical reductionist approach is employed to address and optimize individual goals, it may lead to a failure in technological, policy, or managerial development interventions through unintended consequences in other goals. This study uses a systems approach to understand the fundamental dynamics between the …

Alkali-Activated Natural Pozzolan/Slag Binder For Sustainable Concrete, Meysam Najimi

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study aimed to fully replace Portland cement (PC) with environmentally friendly binders capable of improving longevity of concrete. The new binders consisted of different proportions of natural Pozzolan and slag which were alkaline-activated with various combinations of sodium hydroxide and sodium silicate. A step-by-step research program was designed to (1) develop alkali-activated natural Pozzolan/slag pastes with adequate fresh and strength properties, (2) produce alkali-activated natural Pozzolan/slag mortars to assess the effects of dominant variables on their plastic and hardened properties, and (3) finally produce and assess fresh, mechanical, dimensional, transport and durability properties of alkali-activated natural Pozzolan/slag concretes. The …

Effects Of Sustainable Materials In Construction, Environment And Health, Muhamet Ahmeti, Mimoza Sylejmani, Vlora Aliu

UBT International Conference

In this paper it is presented a definition of sustainable construction from ecological aspect, characterized by reducing the impact of different materials in the environment during construction, but also during the whole lifetime of use of buildings. To assess the impact of materials on health and environment is necessary to examine all phases from beginning of the materials manufacturing till the insertion to the construction, including the use of natural resources for the production of construction products, necessary energy for production, amount of release and CO2 emissions (carbon dioxide) in different stages, methods of construction, use of construction and in …