Engineering Commons^™

Gate Level Dynamic Energy Estimation In Asynchronous Circuits Using Petri Nets, Ryan Mabry

USF Tampa Graduate Theses and Dissertations

This thesis introduces a new methodology for energy estimation in asynchronous circuits. Unlike existing probabilistic methods, this is the first simulative work for energy estimation in all types of asynchronous circuits.

The new simulative methodology is based on Petri net modeling. A real delay model is incorporated to capture both gate delays and interconnect delays. The switching activity at each gate is captured to measure the average dynamic energy consumed per request/acknowledge handshaking pair. The new type of Petri net is called Hierarchical Colored Asynchronous Hardware Petri net (HCAHPN). The HCAHPN is able to capture the temporal and spatial correlations …

Comparison Of Simulated And Measured Flow Patterns: Solid And Gas Mixing In A 2d Turbulent Fluidized Bed, Ulla Ojaniemi, Sirpa Kallio, Alf Hermanson, Mikko Manninen, Maiju Seppälä, Veikko Taivassalo

The 12th International Conference on Fluidization - New Horizons in Fluidization Engineering

Results from experiments done in a 2D turbulent fluidized bed cold model are presented. Experiments were conducted to study flow patterns, particle mixing in the bed and spreading of gas blown from one side into the bed. 2D simulations of the experiments were carried out using the Eulerian multiphase models of the Fluent and MFIX CFD softwares.

Numerical Simulation Of Spouted Bed Reactors Using Process Engineering Models: Application To Coal Gasification, Alexandra Mendes, Alain Dollet, Carine Ablitzer, Gilles Flamant, Christophe Perrais

The 12th International Conference on Fluidization - New Horizons in Fluidization Engineering

A spouted bed reactor operating at high temperature has been modelled using one dimensional models based on process engineering concepts. The process of coal gasification has been selected to demonstrate the models achievements and predictions have been compared to previous spouted bed reactor experimental results.

Signal Processing Of An Ecg Signal In The Presence Of A Strong Static Magnetic Field, Aditya Gupta

Electronic Theses and Dissertations

This dissertation addresses the problem of elevation of the T wave of an electrocardiogram (ECG) signal in the magnetic resonance imaging (MRI). In the MRI, due to the strong static magnetic field the interaction of the blood flow with this strong magnetic field induces a voltage in the body. This voltage appears as a superimposition at the locus of the T wave of the ECG signal. This looses important information required by the doctors to interpret the ST segment of the ECG and detect diseases such as myocardial infarction. This dissertation aims at finding a solution to the problem of …

Network Performance Management Using Application-Centric Key Performance Indicators, Susan Mcgill

Electronic Theses and Dissertations

The Internet and intranets are viewed as capable of supplying "Anything, Anywhere, Anytime" and e-commerce, e-government, e-community, and military C4I are now deploying many and varied applications to serve their needs. Network management is currently centralized in operations centers. To assure customer satisfaction with the network performance they typically plan, configure and monitor the network devices to insure an excess of bandwidth, that is overprovision. If this proves uneconomical or if complex and poorly understood interactions of equipment, protocols and application traffic degrade performance creating customer dissatisfaction, another more application-centric, way of managing the network will be needed. This research …

Details And Description Of Operations Research, Paul Savory

Department of Industrial and Management Systems Engineering: Reports

The ambiguous term operations research was coined during World War II. A frequent substitute is management science. Operations research is a scientific approach to analyzing problems and making decisions. It uses mathematics and mathematical modeling on computers to forecast the implications of various choices and zero in on the best alternatives. This content paper provides an overview of operations research. It highlights operations research problems, methods for solving problems, different areas of operations research, and example problems.

Frequency-Domain Measurement Method For The Analysis Of Esd Generators And Coupling, Jayong Koo, Qing Cai, Giorgi Muchaidze, Andrew Martwick, Kai Wang, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

A method for analyzing electrostatic discharge (ESD) generators and coupling to equipment under test in the frequency domain is proposed. In ESD generators, the pulses are excited by the voltage collapse across relay contacts. The voltage collapse is replaced by one port of a vector network analyer (VNA). All the discrete and structural elements that form the ESD current pulse and the transient fields are excited by the VNA as if they were excited by the voltage collapse. In such a way, the method allows analyzing the current and field-driven linear coupling without having to discharge an ESD generator, eliminating …

Assessment Of The Contribution Of Game-Based Simulation In The Advancement Of Individual Soldier Intelligence Gathering Skills, Carlos Wiley

Electronic Theses and Dissertations

Self-directed Learning Internet Modules based on gaming technology are making tremendous strides as tools to current training system for our military services. Currently, the US Army is testing the Every Soldier is a Sensor Simulation software (ES3) as part of the Every Soldiers a Sensor program that focuses on intelligence gathering and maintaining situational awareness. The primary training goal of this simulation is the training of individual soldiers on conducting "Active Surveillance" and "Threat Indicator Identification" where the soldier is an active participant in the process. Traditional training in intelligence gathering is based largely on cold war models. As a …

Modeling And Simulation Of A Microturbine Generator To Be Coupled With A Molten Carbonate Fuel Cell For Distributed Generation, Karleine M. Justice

Browse all Theses and Dissertations

Distributed generation is desired when the individual energy requirements ranging from 25-75 kW of office buildings, restaurants, hospitals and apartments can not be met by the current electric utility grid. Microturbine generators as stand alone power generation systems have been designed to meet these requirements. For power requirements up to 50 MW, hybrid fuel cell systems offer higher efficiency and lower levels of pollutant emissions with more advanced fuel energy savings than non-hybrid systems. The objective of this project is to develop a simulation of a microturbine generator as a stand alone power generation system to validate a microturbine generator …

Virtualstep: 4d Simulation, Purdue Ect Team

ECT Fact Sheets Archive

The main value from 4D is derived from using it proactively to visualize the construction sequence. Another benefit is the ability to run what-if scenarios to determine optimum scheduling and resource management. Also, by linking 3D drawings to a project schedule, all project stakeholders, from the owner to the tiling subcontractor, can see how the project is supposed to progress. VirtualSTEP Products include 4D Project Navigator, Conflict Coordinator, Project Reporter, and Project Analyzer. All these products are web-based.

Dynamic Construction Visualizer, Purdue Ect Team

ECT Fact Sheets Archive

The Dynamic Construction Visualizer (DCV) is general-purpose 3D visualization system that allows simulation model developers to animate modeled operations with chronological and spatial accuracy in 3D virtual space. The system is independent of any particular simulation-modeling program or CAD modeling software.

Prosidyc: Simulation Program For Construction Operations, Purdue Ect Team

ECT Fact Sheets Archive

PROSIDYC is a system for simulating construction operations jointly developed by the Planning and Methods Unit of Dragados y Construcciones, Madrid, Spain and the Division of Construction Engineering & Management at Purdue University. PROject SImulation Dragados Y Construcciones (PROSIDYC) is a computer based system for analyzing construction job site production processes. It is used to improve productivity in the field by studying resource utilization and cycle times and identifying opportunities for production improvement. PROSIDYC uses the CYCLic Operations NEtwork (CYCLONE) modeling format originally developed by Daniel W. Halpin

Stroboscope, Purdue Ect Team

ECT Fact Sheets Archive

STROBOSCOPE is an acronym for STate and Resource Based Simulation of COnstructionProcEsses. It is a general-purpose simulation programming language that has been designed for the simulation of very complex construction processes that involve many different types of resources. STROBOSCOPE models are based on a network of interconnected modeling elements and on a series of programming statements that give the elements unique behavior and control the simulation.

Design Of A Controller To Control Light Level In A Commercial Office, Saeid Javidbakht

Browse all Theses and Dissertations

Proper amount of light in a business office is important for health and productivity of the employees. On a sunny day, there may be more than enough light entering the office from outside to carry out the necessary tasks. Presently, the main source of light in most offices is the fluorescent lamp. Thus, It is possible to save energy by dimming the fluorescent lamp. Dimming of the fluorescent lamp is possible by changing the frequency of the sinusoidal voltage or current. Hence, there is a need of a control system to adjust the light from the fixtures based on the …

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Robust Control Techniques Enabling Duty Cycle Experiments Utilizing A 6-Dof Crewstation Motion Base, A Full Scale Combat Hybrid Electric Power System, And Long Distance Internet Communications, Marc Compere, Jarrett Goodell, Miguel Simon, Wilford Smith, Mark Brudnak

Publications

The RemoteLink effort supports the U.S. Army's objective for developing and fielding next generation hybrid-electric combat vehicles. It is a distributed soldierin- the-Ioop and hardware-in-the-Ioop environment with a 6-DOF motion base for operator realism, a full-scale combat hybrid electric power system, and an operational context provided by OneSAF. The driver/gunner crewstations rest on one of two 6-DOF motion bases at the U.S. Army TARDEC Simulation Laboratory (TSL). The hybrid power system is located 2,450 miles away at the TARDEC Power and Energy System Integration Laboratory (P&E SIL). The primary technical challenge in the RemoteLink is to operate both laboratories together …

Comparison Of Solar Hot Water Systems Simulated In Energygauge Usa And Trnsys 15, Florida Solar Energy Center, Michael Anello

FSEC Energy Research Center®

This document is meant to serve as a detailed summary of the comparison between the simulation methods of EnergyGauge USA and TRNSYS (version 15) relating to solar hot water systems. The initial motivation behind this comparison was to verify that the f-chart model created for EnergyGauge's solar hot water calculations was reporting the correct results. To this end, models of three systems were created in TRNSYS in order to serve as a baseline for the EnergyGauge results. The three systems modeled were: Liquid-active closed loop (LACL), Liquid-active open loop (LAOL), Integrated collector storage (ICS). This document will detail each of …

Energy Efficient Renovations Of Storm Damaged Residences - Florida Case Studies, Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

Storm-damaged homes offer the opportunity for repairs that reduce energy use, improve comfort and enhance resistance to future storms. Case studies of four Florida homes damaged in the summer of 2004 were documented to show the costs and benefits of various retrofit strategies. All four homes required roof replacement and each took advantage of roof cladding with higher reflectance than the original, a proven means of reducing cooling energy use. Two of the case studies included improvements to attic insulation, tightening of the envelope and/or duct system and improved efficiency equipment and lighting. Energy savings attributable to storm repairs were …

Modeling Liquid-Crystal Devices With The Three-Dimensional Full-Vector Beam Propagation Method, Qian Wang, Gerald Farrell, Yuliya Semenova

Articles

Simulation of light propagation within nematic liquid-crystal (LC) devices is considered, of which the director is aligned normal to the z axis. A three-dimensional full-vector finite-difference beam propagation method for an anisotropic medium is presented and an alternating direction implicit scheme is adopted. Simulations of light propagation in a bulk polarization converter, a waveguide with a LC covering layer, and an integrated polarization splitter and optical switch are presented. Comparison with an existing simulation method is carried out for beam behavior within the bulk polarization converter. The effect of strong surface anchoring of a LC cell on the beam behaviors …

Simulation And Modeling Of Return Waveforms From A Ladar Beam Footprint In Usu Ladarsim, Scott E. Budge, B.C. Leishman, R.T. Pack

Electrical and Computer Engineering Faculty Publications

Ladar systems are an emerging technology with applications in many fields. Consequently, simulations for these systems have become a valuable tool in the improvement of existing systems and the development of new ones. This paper discusses the theory and issues involved in reliably modeling the return waveform of a ladar beam footprint in the Utah State University LadarSIM simulation software. Emphasis is placed on modeling system-level effects that allow an investigation of engineering tradeoffs in preliminary designs, and validation of behaviors in fabricated designs. Efforts have been made to decrease the necessary computation time while still maintaining a usable model. …

Steady State Simulations Of A Mars Entry Vehicle, Daniel Guy Schauerhamer

Undergraduate Honors Capstone Projects

Using computational fluid dynamics, steady state simulations of a capsule like Mars entry vehicle at certain trajectory points was performed. Trajectory points were chosen incrementally from 90 to 11.5 kilometers altitude. The Direct Simulation Monte Carlo method and the Overflow 2 Navier-Stokes solver were used depending on Knudsen number values greater than or less than 0.1, respectively. To compare flow effects of the maximum angle of attack error margin of three degrees, axially symmetric cases were computed and compared to three dimensional cases demonstrating an attack angle (α) of three degrees. Lift and drag coefficients are reported and compared. The …

Impact Simulation And Analysis Of Sandwich Structures, Daewon Kim

Master's Theses - Daytona Beach

Impact damage on aircraft and spacecraft can be a severe problem that may cause catastrophic results. Several aerospace structures have been used to resist or absorb energy in the occasion of impact. Among these, a sandwich structure has advantages with high stiffness, strength to weight ratio, and its relatively cheap cost. However, finding the impact structural response of a sandwich structure, by performing experiments, has disadvantages. First, impact is a complex problem with a multi-parameter nature and many factors should be considered. Secondly, it is a destructive test and the test subject may be damaged during the test. On the …

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan

Makara Journal of Technology

Model is a representation of a system. Through model, it can be easier to forecast and control the changing of each element system. Electricity distribution is also a system. Losses are general problem that exist in a distribution network system. But with the right methods, specifically technical energy losses can be reduced in order to increase the efficiency. By making model of the distribution network, the value of technical energy losses in the whole network as well as in every line can be observed. Simulation can also be used to see all losses reduction alternatives. By comparing results from each …

Parallel Simulated Annealing For Scheduling Agile Manufacturing Systems, Ahmed Osama Abdulrahman

Archived Theses and Dissertations

The problem addressed in this research is the scheduling of an agile manufacturing system comprised of machining and assembly operations with the objective of minimizing the makespan. This problem has been addressed in the literature using heuristics and metaheuristics. In addition, a lower bound has been developed. This research builds upon the findings of the recent literature and proposes two enhanced algorithms, parallel simulated annealing and parallel modified simulated annealing, to solve the addressed problem. The performance of the developed algorithms is compared to that of another simulated annealing algorithm that is available in the literature. Performance comparisons are based …

Patterns In Team Communication During A Simulation Game, David M. Baca, Ray Luechtefeld, Steve Eugene Watkins

Engineering Management and Systems Engineering Faculty Research & Creative Works

The development of communication skills is a necessary preparation for effective engineering teamwork. Argyris' "Theory of Action" provides a framework for understanding patterns in team dialogue. Students can benefit from an awareness of these patterns. The theory highlights the detection and correction of errors by sharing information during group collaboration and interactions. Quality decision-making can be enhanced when members of a team develop high degrees of openness and interdependence. Quality decision-making can be diminished when members of a team regulate the information shared within the team. This work analyzes team interactions from simulation games used in an interdisciplinary engineering course …

Simulated Performances Of A Heat Pump System For Energy And Water Conservation In Open And Confined Greenhouse Systems, Ilhami Yildiz, D. P. Stombaugh

BioResource and Agricultural Engineering

The purpose of this study was to determine and compare the performances of conventional and heat pump systems for energy and water conservation in open and confined greenhouse systems. Conventional gas furnaces and evaporative cooling, respectively, provided heating and cooling in the conventional system. In the heat pump systems, gas-fired heat pump units provided both heating and cooling. The greenhouse with heat pump units also had an option to be operated as a completely confined system, using one of the heat pump units as a dehumidifier. Average energy consumption in winter was 56.9, 23.5, and 11.3 MJ/day.m² in the conventional, …

Process Modeling For Simulation, John Ryan, Cathal Heavey

Articles

This paper discusses shortfalls in relation to the requirements gathering phases of simulation. While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the requirements gathering phase. This is surprising as it has been reported by several researchers that the requirements phase can absorb twice as much resources as the coding phase. There are numerous process modeling tools available (over 100) that can and have been used to support the requirements phase of simulation. This paper provides a selective review of some of the most important in relation …

Estimating Risk Of Failure Of Engineering Structures Using Predictive Likelihood, Colin C. Caprani, A. Bordallo-Ruiz, E. J. O'Brien

Conference papers

It has been common engineering practice to define characteristic values for loading and capacity of structures in order to assess the structural capacity of existing structures. This approach, yet practical and intuitive, lead to the comparison of deterministic values (characteristic values) that had to represent all the variability of the problem and is considered to be conservative, as usually loading is overestimated and capacity underestimated, yielding to calculations with high safety margins for the extreme events. Probabilistics methods have tried to overcom e this limitation by computing the overall probability of failure (Pf) for the lifetime of the structure, taking …

Dynamic Modeling Of Microclimate And Environmental Control Strategies In A Greenhouse Coupled With A Heat Pump System, Ilhami Yildiz, D. P. Stombaugh

BioResource and Agricultural Engineering

The purpose of this study was to develop and validate a dynamic simulation model to be employed in accurate prediction of microclimate in a greenhouse as a function of dynamic environmental factors. The model has options to evaluate the effects of location, time of the year, orientation, single and double polyethylene glazings, conventional and heat pump heating and cooling systems, open and confined greenhouse systems, CO₂ enrichment, variable shading, and the use of night curtains. Conventional gas furnace and evaporative cooling, respectively, provided heating and cooling in the conventional system. In the heat pump systems, gas-fired heat pump units …

The Use Of Pc Based Simulation Systems In The Training Of Army Infantry Officers - An Evaluation Of The Rapid Decision Trainer, Thomas Lucario

Electronic Theses and Dissertations

This research considers two modes of training Army infantry officers in initial training to conduct a platoon live fire exercise. Leaders from groups that were training with the current classroom training methods were compared to leaders from groups whose training was augmented with a PC based training system known as the Rapid Decision Trainer (RDT). The RDT was developed by the US Army Research Development and Engineering Command for the purpose of aiding in the training of tactical decision making and troop leading procedures of officers in the initial levels of training to become rifle platoon leaders. The RDT allows …