Engineering Commons^™

Simulation Of The Performance Of Kevlar Impregnated Shear Thickening Fluid Ballistic Test Results, Ridwan Prasetya, Andoko Andoko, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

This study explores the enhancement of Kevlar fabric’s ballistic performance through impregnation with Shear Thickening Fluid (STF) for potential application in soft body armor. The experimental approach often fails to elucidate mechanical phenomena critical for the development of lightweight and high-strength body armor designs. To address this limitation, the finite element method, specifically using ANSYS/LS-DYNA R.13, was employed for a comprehensive analysis. The simulation aimed to evaluate the impact of STF on Kevlar fabric by assessing projectile velocity, force exerted by the projectile onto the fabric, displacement, stress distribution, and fabric failure mechanisms. Kevlar yarn was modeled as a shell …

Pid Controller Design Of An Avr System, Soumya Pan

Manipal Journal of Science and Technology

Voltage control and reactive power management are two facets that enable the reliability of the transmission network. More reactive power demand causes a voltage drop at the generator terminal. Such reactive power demand may arise from some industries connected to the transmission line. Usually, this reactive power is of an inductive nature which causes the voltage drop. In this regard, automatic voltage regulation (AVR) is an important aspect that is responsible for the continuous adjustment of field excitation to maintain the generator terminal voltage constant. This is done by comparing the terminal voltage with a reference voltage and by changing …

Aligning Clinical Productivity Of Cancer Care Providers: A Simulation-Based Approach, Maile Sinclair-Baxter

USF Tampa Graduate Theses and Dissertations

The growing number of cancer patients over the years has presented many challenges and opportunities for improvement in the healthcare system. These challenges and opportunities have demonstrated the need for a tool that can enhance the clinical productivity of healthcare providers, ultimately impacting patients’ overall experience. We studied the clinical Full Time Equivalency (cFTE) for providers at a cancer research center. cFTE is the percentage of time allocated for clinical work. In this cancer research center, the clinical work of each provider is supposed to match a targeted cFTE. The cancer research center’s concern was that the provider’s clinical productivity …

3d-Printed Remote Controlled Aircraft, Sebastian Bessoudo, Jose Ramirez, Manny Ruiz, Andrew Edwards

Mechanical Engineering

The Senior Project for the 3D Printed Aircraft presents a compelling challenge to the team: design and fabricate an aircraft for the Cal State LA 3D-Printed Fixed-Wing Aircraft Competition, comprising three distinct events: Flight, Design, and Simulation. The objective of the flight competition is to achieve the longest flight duration, while the design event emphasizes innovation and originality. In the Simulation contest, our aircraft's CAD model undergoes Computational Fluid Dynamics analysis to assess its aerodynamic performance. These competitions are slated for May 2024.

While building the aircraft has its limitations due to the source of our construction being only 3D …

Simulation Of Heat And Mass Transfer In A Refractance Window Dryer For Aloe Vera Gel, A. Shahraki, M. Khojastehpour, M. R. Golzarian, E. Azarpazhooh

Research outputs 2022 to 2026

Introduction Drying is one of the oldest methods of food preservation. To increase the efficiency of heat and mass transfer while maintaining product quality, the study of the drying process is crucial scientifically and meticulously. It is possible to conduct experimental tests, trial and error, in the drying process. However, this approach consumes time and cost, with a significant amount of energy resources. By harnessing available software and leveraging technological advancement to develop a general model for drying food under varying initial conditions, the drying process can be significantly optimized. Materials and Methods This study was conducted with the aim …

Modeling Of Continuous Stirred Tank Reactor For Esterification Process, Olimjon Rikhsiboyevich Maksudov, Abdulaziz Nodirbek Ogli Bakhtiyorov, Orifjon Olimovich Zaripov, Аdhаm Tilovovich Norkobilov

Technical science and innovation

This paper presents a comprehensive study on the synthesis of ethyl acetate through the esterification of acetic acid with ethanol using a continuous stirred tank reactor (CSTR). Ethyl acetate is a significant solvent in various industries due to its eco-friendly characteristics and economic efficiency. The study develops a detailed mathematical model focusing on the operating of the CSTR to enhance the understanding of the reaction kinetics and thermodynamics in a continuous processing environment. The reactor model was validated with experimental data to optimize process parameters, aiming to improve yield and selectivity. Key variables such as reactant ratios, and operational temperatures …

Simulating Information And Communication Applications In Employee Interaction Network Models, Matthew Kanter

Departmental Honors & Graduate Capstone Projects

Information and communication technology (ICT) use has been identified throughout its development and evolution with the Internet boom as a net positive tool for most employees and organizations in the working world. Only recently have studies regarding employees’ well-being begun to come to the forefront of research regarding these rapidly evolving technologies, however these are important issues to discuss in the context of work-life boundary management, emotional exhaustion, overwhelming stress levels, and moral disengagement among other employee well-being dimensions. To explore how employees’ well being might be influenced by ICT use, this study conducted a quantitative survey and analyzed a …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Physics Undergraduate Honors Theses

Mechanical Exfoliation

Comparing North American Professional Sports League Season Formats Using Monte Carlo Simulation, Lathan Gregg

Industrial Engineering Undergraduate Honors Theses

Each NFL, NBA, and MLB season consists of a regular season, in which teams play a set number of scheduled games and a playoff, in which qualifying teams compete for a championship. At the conclusion of each season, teams are ranked based on their performance throughout the season. This study aims to investigate the ability of each league's season format to accurately rank teams using Monte Carlo simulation. Matches between two teams are simulated by using the team’s assigned strength ranks to calculate a winning probability for each team. The winning probabilities are simulated with different skill values, dictating how …

Novel Vector Assignment Approach For Inherent Strain Modeling Of Laser Powder Bed Fusion Manufacturing, Lucas M. Morand

All Dissertations

The expansion of the design space due to additive manufacturing (AM) has been a large motivator for the success of this family of processes. Despite the complexity of the physics in metal laser powder bed fusion AM causing significant stresses and strains in finished parts, the design advantages and subsequent performance improvements continue to drive the expansion of AM. Because the trial-and-error approach to AM part development is cost prohibitive, simulation of prints has become crucial. However, full thermo-mechanical simulation is susceptible to the same pitfall of time and computational cost in order to attain part-scale results. The development of …

Integrating Galectin-3 Into A Computational Model Of Cardiac Fibrosis Progression, Adam Pieratt

Chemical Engineering Undergraduate Honors Theses

Cardiac fibrosis, a large contributor to heart failure, is the excessive accumulation of extracellular matrix in response to stress or injury. There are no approved treatments for cardiac fibrosis, and targeting specific species involved creates complex problems for drug development, so a computational model of the cardiac fibroblast signaling network can be used to observe the interactions involved in the progression of cardiac fibrosis. In this paper, a new protein called galectin-3 is integrated into this existing model, and connections are established to expand the coverage of the network. The additions are described, simulated using Netflux biological system simulation software, …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

Evacuation Of Students With Intellectual Disability In Building Fires: A Three-Part Methodology, Haley Hostetter

All Dissertations

People with disabilities are one of the most vulnerable groups in building fires. Despite this, they have traditionally been overlooked by fire evacuation researchers. This is perhaps the most alarming for the group with Intellectual Disability when given their present statistics for fire involvement, injuries, and death. Annually, people with mental disabilities are involved in 1700 home fires, resulting in 39 fatalities and 122 injuries per 1000 fires. Additionally, 40% of these fires were started intentionally by people with mental disabilities. When combined with their high fire risk, the lack of evacuation research focused on people with Intellectual Disability shows …

The Advancement Of Experimental And Computation Tools For The Study Of Molten Salt Chemistry To Facilitate The Extraction Of Strategic Elements In Nuclear Applications, Michael Stoddard

Theses and Dissertations

Nuclear energy presents environmental benefits, yet the challenge of radioactive waste management persists. Advanced solutions, such as Molten Salt Reactors (MSRs), require a more profound understanding of molten salt chemistry. This research aims to develop tools, including a depletion simulator, molten salt electrochemical simulator, and a fluoride-based thermodynamic reference electrode for electrochemical purification. The computationally inexpensive depletion simulator allows for exploration into extraction and processing strategies for molten salt reactors. An illustrative case study on Mo-99 production from MSRs demonstrates the practical application of the theoretical framework, emphasizing the need for optimization in extraction effectiveness and separation difficulty. The electrochemical …

Optimization Of Human Interactions In The College Campus Model Via Simio Integration, Benjamin E. Chaback

Doctoral Dissertations and Master's Theses

College campuses are a significant part of life in some cities. Many students each year attend university, pursuing additional knowledge from faculty members. Both staff and faculty members rely on these students to have successful jobs and to ensure the university functions. Yet recently, more and more students are attending, leading to overcrowding, lower admission rates, and difficulty getting into good programs. Previous work exists on qualitative student affairs and quantitative retention data, yet little on using simulations to model this problem. This work aimed to (a) Determine the ability to successfully model human interactions/people flow on a college campus, …

Adaptive Control Of An Aeroelastic System For Active Flutter Suppression And Disturbance Rejection, Patrick Sterling Downs

Doctoral Dissertations and Master's Theses

The future of aircraft design strives for lighter weight, more aerodynamically efficient structures. These improvements may come with the drawback of increased structural flexibility and elevated aeroelastic effects, often resulting in a lower flutter speed. This motivates the implementation of advanced control methods to control aeroelastic systems over a range of flight conditions, suppress and delay the onset of flutter, and compensate for disturbances, actuator dynamics, and unmodeled nonlinear dynamics.

This dissertation first develops a novel method for constructing time-domain simulation models of two and three-dimensional aeroelastic systems, resulting in models that are suitable for the implementation of state-space control …

Design And Analysis Of Free Piston Stirling Engines For Microreactor Applications, Phat D. Doan

Nuclear Engineering ETDs

Through the development of microreactors, a free piston Stirling engine (FPSE) is an excellent candidate to support the development of the microreactors applications. This study proposes a 20 kWe design of the FPSE for microreactor applications. The model has been developed and analyzed through a MATLAB code that was verified and benchmarked with both RE-1000 engine’s experiment data and Sage software. The MATLAB code has been developed from scratch using the first and second order approximation to simulate the engine’s steady state operation. There are three operating conditions that were applied to the code such as ideal isothermal, ideal adiabatic, …

Performance Analysis Of Mobile Edge Computing Deployment Models In 5g Networks, Safaa Alali, Abdulkaim Assalem

Jerash for Research and Studies Journal مجلة جرش للبحوث والدراسات

5G networks and Mobile Edge Computing (MEC) are two main pillars of the next technological revolution. The first pillar provides ultra-reliable, high-bandwidth connectivity with ultra-low latency, while the second pillar gives mobile networks cloud computing capabilities at the edge of the network, enabling compute-dense, context-aware services for mobile users. So the next generation of mobile networks will see close integration between computing and communication. Therefore, it was necessary to study the different deployment options for edge hosts in 5G network, to know the effect of those options on the overall performance of the network. In this research, (Omnetpp 6.0) network …

Advanced Intermediate Manufacturing (Aim) Supply Chain Concepts Leading To Reduced Lead Times And Improved Responsiveness, Eric S. Draudt

Theses and Dissertations

This thesis investigates the optimization of the supply chain for key aircraft components, focusing on the implementation of Advanced Intermediate Manufacturing (AIM) production facilities. Utilizing anyLogistix, the study compares the current supply chain model based on Supply Chain Operations Wing (SCOW) data with various AIM production facility configurations: single, dual, quadruple, and three utilization-driven models (high, medium, and low). The findings demonstrate that integrating AIM production facilities significantly reduces lead times, with even a single facility dramatically cutting down the lead time from over 800 days to approximately 104 days. The utilization models further provide insights into operational flexibility under …

A Fractal Art Approach To The Three-Body Problem, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

This preliminary study explores a new search strategy for identifying relatively stable vs. unstable solutions to the planar three-body problem in astrophysics, starting from the perspective of computer-generated art. Here classical Newtonian accelerations, speeds, and positions of all three bodies in a fixed plane are calculated. All three bodies are stationary at time zero, and the fate of the system is classified as reflecting either a bound stable orbit, a likely collision, or the ejection of one body. The initial position of one of the three bodies is varied in the image plane, and the outcome coded as one of …

Strategy Optimization Method Of Multi-Dimension Projection Based On Deep Reinforcement Learning, Jing An, Guangya Si, Lei Zhang

Journal of System Simulation

Abstract: Based on the perfect performance of deep reinforcement learning (DRL) in strategy optimization, this paper proposes a strategy optimization method of action taking the multi-dimension projection action as the main research object. The method combines the simulation experiment method with the DRL method. After analyzing the current situation of strategy optimization research, the deep learning framework is selected according to the research problems, and a DRL multi-dimension projection strategy model based on the asynchronous advantage actor-critic (A3C) algorithm is constructed. Through simulation experiments, the interactive learning between the DRL model and the simulation of "out of the loop" is …

Grand Challenges In Membrane Transport, Modeling And Simulation, Jacob Monroe, Chidambaram Thamariselvan, Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

Today, membranes play an increasing role in separation processes across a wide range of industries, including water treatment, biomedical applications, bioseparations, and gas separations (Yeom et al., 2022). Numerous different membrane types exist, which can be broadly categorized as either porous or non-porous, where pores may be or may not be filled with a separate phase from the bulk solvent and membrane phases. In addition, various driving forces exist - pressure, concentration, electric field, etc.—that lead to transport across the membrane. For a porous membrane, solute transport is usually governed by convective flow through the pores. Micron-sized pores are used …

Data Driven Trade-Off Analysis For Cybersecurity, Goskel Kucukkaya, Murat Ozer, Murat Balci, Emrah Ugurlu

Engineering Management & Systems Engineering Faculty Publications

Trade-off analysis, a specialization of systems engineering, addresses design criteria like security, cost, performance, and compliance. Monte Carlo simulations are commonly employed to generate impact scenarios for trade-off analysis combined with solution alternatives that accommodate industry-specific considerations and uncertainties. In the cyber domain, this paper proposes a methodology for data-driven trade-off analysis in cybersecurity, leveraging industry reports as primary data sources using confidentiality, integrity, and availability as trade-off analysis objectives. Distribution functions are derived to manage and model uncertainties for various industries. The approach given in this study aims to facilitate informed choices and to enhance cybersecurity decision making and …

Discrete Event Simulation (Des) In Swapping/Charging Of Battery Electric Vehicles In Underground Mining, Albert Einstein Amponsem

Masters Theses

"With climate change concerns escalating, international agreements such as the Kyoto Protocol, the US Presidential Policy, and the Paris Agreement aim to reduce greenhouse gas (GHG) emissions, targeting significant reductions by 2050. The mining sector, a notable contributor to GHG emissions primarily through diesel-powered material haulage, emits approximately 68 million tons of CO₂ annually. Transitioning to Battery Electric Trucks (BETs) presents a viable mitigation strategy by replacing diesel trucks with electric alternatives, thus eliminating CO₂ emissions.

However, the effectiveness of BETs hinges on optimized battery swapping and charging procedures. This study employs Discrete Event Simulation (DES), a computational …

A Simulation Model Analysis In The Us-Mexico Border, Carlo A. Zorola, Hiram Moya, Aditya Akundi

Manufacturing & Industrial Engineering Faculty Publications

Supply Chain (SC) is the flow of goods or services between supply and demand points. New or innovative strategies in SC have been researched and developed to deal with disruptive events, such as COVID-19, hurricanes, geopolitical, and even climate change. These challenges create supply imbalances, logistical challenges, and policy restrictions for transborder commerce. The DHS has implemented the Free and Secure Trade (FAST) program in both the US-Mexico and US-Canada border. These lanes are dedicated queues for commercial vehicles. In 2022, the government of Nuevo León, México, opened a dedicated lane just for Tesla´s northbound commercial traffic. There has been …

Performance Characterization And Optimization Of A Point-Cloud-Based Path Planner In Off-Road Terrains, Casey D. Majhor

Dissertations, Master's Theses and Master's Reports

In this dissertation, I present a multifaceted study on the generation of artificial terrains using a multifractal method, and their use in autonomous ground vehicle (AGV) planning and navigation performance characterization in high-fidelity simulations, and automated parameter optimization.

My first contribution is a multifractal artificial terrain generation method leveraging the 3D Weierstrass-Mandelbrot function to control terrain roughness. We generate 60 unique off-road terrains while varying the fractal dimension and test the impact on vehicle traversal difficulty. Results show that increasing the fractal dimension decreases low-roughness areas, increases semi-rough and high-roughness areas, and decreases vehicle success rates while increasing vertical accelerations, …

Parametric Optimization Of Friction Stir Welding Of Aa6061-T6 Samples Using The Copper Donor Stir-Assisted Material Method, Aiman H. Al-Allaq, Joseph Maniscalco, Srinivasa Naik Bhukya, Zhenhua Wu, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

This study presents an optimization of the process parameters for the effect of copper (Cu) donor material percentage on the friction stir welding (FSW) of AA6061-T6 alloy. Extensive factorial experiments were conducted to determine the significance of the rotational speed (ω), the transverse speed (v), the interface coefficient of friction (μ), and the Cu donor material percentage in the plunge, left, right, and downstream zones. Design Expert 13 software was used to identify the number of simulation experiments to be conducted using the Abaqus simulation software. From Design Expert 13, which is a thorough multi-objective optimization analysis software, we were …

Optimal Control And Evaluation Of Shipboard Power Systems, Musharrat Sabah

Theses and Dissertations--Electrical and Computer Engineering

Electric warships are involved in complex missions consisting of multiple simultaneous operations. In order to ensure mission success, future ships must be designed in a way that optimizes their performance in the presence of complex mission loads. The focus of this research is an effort to optimally control the performance of shipboard systems during missions involving multiple scenarios or vignettes. The evaluation of the performance of mission-oriented power systems is based on the degree to which these systems deliver power to the loads required to perform the mission at hand. The performance of such systems involves a dynamic interplay between …

Radiation Damage Simulation Using Molecular Dynamics In Ni-Based Alloy, Yanxin Shen, Yue Yang, Xuelian Ou, Peng Wang, Zhenjiang You, Xiaofeng Tian

Research outputs 2022 to 2026

In the present study, we investigated the irradiation-induced induction in Ni80Cr20, Ni80Fe20, Ni50Fe50, Ni40Fe40Cr20 by molecular dynamics (MD) simulation. A previously published modified potential is used to provide a detailed account of the process involved in the production and evolution of defects. Ni50Fe50 and Ni40Fe40Cr20 alloys exhibit comparable damage level and better radiation response compared to Ni80Cr20 and Ni80Fe20. The inhibition effect of interstitial clusters increases with the complexity of alloying elements. The alloying of Cr has resulted in Ni80Fe20 and Ni50Fe50 tend to form 1/3<111> dislocation loops while at the same time making Ni40Fe40Cr20 and Ni80Cr20 more susceptible to …

Ai-Enabled Assessment Of Roadway Integrity: Forecasting Bitumen Deformation And Road Stability Throughout The Lifecycle Under Traffic Impact, Sabahudin Vrtagic, Milan Dordevic, Fatih Dogan, Muhammed Codur, Mario Hoxha, Edis Softic

Materials Science and Engineering Faculty Research & Creative Works

Asphalt-paved Road junctions frequently encounter deformation and degradation challenges due to heavy vehicular traffic and varying climatic conditions, such as temperature fluctuations and precipitation. This study employs a multifaceted approach, incorporating a Multilayer Perceptron (MLP) model, ancillary machine learning techniques, and optimization methodologies, to address these challenges effectively. The primary objectives are the prediction and analysis of pavement deformation, the optimization of maintenance strategies, and the evaluation of road effectiveness. Our findings underscore the substantial contribution of heavy vehicles to road erosion and the profound impact of vehicular retention and braking at intersections. A Multilayer Perceptron (MLP) model is utilized …