Lagrange Multipliers As A Metric For Early-Stage Shipboard Power System Design, Magdalen A. Barnes

Theses and Dissertations--Electrical and Computer Engineering

Integrated power systems are essential in the operation of electric ships and must function under a diverse range of conditions. In addition to routine operation, ships should be prepared to respond to challenging events that require significant amounts of power. Demanding scenarios, coupled with complex and interconnected power systems, present challenging issues. The power and energy ratings of equipment are crucial factors in the operational success of the ship; however, to meet economic constraints, balance between performance and cost must be upheld. Details regarding equipment models and specifications are typically unavailable during early-stage design. Power system modeling and simulation can …

Design Of A Spacecraft Power System Experiment, Jay Bakulkumar Kamdar

Masters Theses

This research delves into the design, implementation, and analysis of a controlled experimental framework for photovoltaic cell characterization and its application in spacecraft power systems. Such a system was simulated and validated by benchmarking characteristics of a photovoltaic module and implementing them in a system design simulation yielding performance data for comparative analysis. A hardware setup was developed to perform IV characterization tests under steady state thermal conditions. Experiments conducted across various thermal regulation profiles helped quantify the effects of temperature on the photovoltaic performance parameters. Active cooling reduced the steady state cell temperature by 17.9% and improved the cell …

A Design And Analysis Of Computer Experiments Approach To Water Distribution Network Seismic Rehabilitation Optimization, Uthman Abiola Kareem

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Water is an essential part of human life. However, there are critical infrastructures that enable water availability in communities and homes. One of such is a water distribution network. Water distribution network performance depends on its reliability, which could be threatened by external agents like earthquakes. When earthquakes occur, they cause damages on some pipes within the distribution network and this limits performance of water distribution network. While earthquakes cannot be prevented, effective maintenance intervention may reduce the impact of earthquakes on water distribution networks. In order to develop an effective maintenance plan, researchers approach it in different ways. However, …

Thermal Management For Optimal Performance Of Polymer Electrolyte Membrane Unitized Regenerative Fuel Cells, Mythy Tran, Ayodeji Demuren

Mechanical & Aerospace Engineering Faculty Publications

Hydrogen is an excellent carrier for energy storage and can be produced from various green and renewable sources. However, the cost of producing hydrogen and converting it to useful energy is much higher than fossil fuel and traditional energy generation and storage systems. Unitized regenerative fuel cells (URFC) maximize utilization of high-cost cells and their components, thus, lowering system capital cost. Improving the URFC efficiency is an effective way to lower its operating cost. This study evaluates utilization of waste heat during operation and recovery strategy to improve system efficiency of Proton Exchange Membrane (PEM) URFC. A COMSOL Multiphysics 3-D …

Transient Power And Thermal Management Of A Hypersonic Vehicle, Jacob H. Jadischke

Browse all Theses and Dissertations

Design of high speed vehicles necessitates incorporating power generation and thermal management systems. Power generation is required as traditional high-speed propulsion sources do not contain rotating components to extract power, and the harsh external thermal environment calls for thermal management. To size these systems, the transient power requirements and the heat generated inside the vehicle must be understood. Sizing these systems at the earliest stages of the vehicle design allows for a more optimized geometry and a trajectory to design the most favorable vehicle. Characterization of these low-quality power and thermal loads from the actuation and fuel pump subsystems has …

Study Of Two-Phase Void Fraction In A Rectangular Channel Using Capacitance Sensor, Peter Ngoc Nguyen

Dissertations, Master's Theses and Master's Reports

Two-phase liquid-gas flow has many applications in the nuclear industry, including active heat exchangers, reactor core designs, secondary steam generators, and two-phase flow loop balance of the plant. The void fraction is a crucial parameter to determine the pressure drop, flow regimes and liquid levels inside the nuclear reactor core. For the past forty years, void fraction has been studied by many researchers by different measurement techniques. Each method has positive and negative attributes. In this study, after extensive literature reviews, the author has chosen a capacitance type void fraction sensor over other void fraction measuring techniques. The principal concept …

Mathematical-Programming Modeling Of Power-Electronics-Based Microgrid Systems, Jack A. Robey

Theses and Dissertations--Electrical and Computer Engineering

The emergence of power-electronics-based microgrid systems is driven by the shift to cleaner energy, transportation electrification, renewable integration, grid modernization through smart grid advancements, and growing demand for energy-efficient solutions. For utilities, these systems present unique opportunities for enhancing grid resilience, improving load management, and enabling distributed energy resource integration. This work presents a modeling and simulation approach for microgrid systems that uses mathematical programming to represent power flow and capture the system dynamics. By solving an optimization problem at each time step, the method enables evaluation of power distribution and system performance under a range of operating conditions, without …

Autonomous Vehicle Supported Mobility Services For Rural Areas, Alvira Ahmed Tasnim

Graduate Theses, Dissertations, and Problem Reports (ETD)

Autonomous Vehicles (AVs) are emerging as a promising mobility solution to address growing transportation demands, particularly unmet traffic demand in rural areas where conventional transit systems often fall short. Rural areas face unique mobility challenges due to dispersed populations, limited infrastructure, and low/no transit coverage. Existing transit services tend to concentrate around dense urban cores, leaving low-demand areas outside underserved. This spatial undercoverage leads to significant mobility gaps for rural residents. This study examines the potential of AV-based ride-sharing services to address these mobility needs by providing flexible, demand-responsive mobility services where fixed-route transit services are either economically or operationally …

Modeling And Simulation Of A Process For Upcycling Of Low-Density Polyethylene Plastic Waste To Ethylene, Xiaoyan Wang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ethylene is one of the most widely produced petrochemicals, with an estimated global output of 180 million metric tons in 2022. Approximately 82 million metric tons of ethylene are used annually for plastic production, primarily for polyethylene (PE), as well as polypropylene (PP) and polyvinyl chloride (PVC). The CO₂ emissions associated with PE production were approximately 14 million metric tons in 2022. Globally, an estimated 70 million metric tons of PE are produced and consumed each year, with the majority (~79%) ending up in landfills or the environment.

This project proposes a novel process in which waste low-density polyethylene (LDPE) …

Numerical Simulation And Group Homework In A Second-Year Dynamics Course, Matthew Stein

Engineering, Computing & Construction Management Faculty Publications

Roger Williams University engineering faculty believe that properly preparing students to use modern engineering tools is best accomplished through integration into coursework throughout the four-year curriculum. But this is challenging in practice, as engineering courses are already packed with essential technical content and any encumbrance to delivering this material is unwelcome. The author’s engineering mechanics course (Dynamics) is an effort to satisfy the conflicting goals of building technical skills while delivering complex content. This paper describes a multi-year effort to integrate solid modeling into the course by requiring numerical validation of symbolic solutions to homework problems. Working in homework groups, …

Development Of A Mixed Reality Robotics Testing Environment, Haneen Hanoon

Graduate Theses, Dissertations, and Problem Reports (ETD)

Development of a Mixed Reality Robotics Testing Environment

Haneen Hanoon

This research presents the development of a Mixed Reality (MR) robotic framework that integrates real and virtual environments for experimental robotics, education, and visualization. The proposed system combines a motion-capture system, a simulator, and a projector to create a spatially aligned, interactive workspace where physical robots coexist with projected virtual objects. The framework enables real-robot motion to be tracked in real time and mirrored in the simulated environment, allowing projected obstacles, goals, and paths to be precisely aligned with the physical world.

A coordinate transformation and scaling process was implemented …

A Systematic Approach To Vehicle Suspension Modeling: Integrating Experimental Testing And Simulation-Based Validation, Naoufel Ghannami

Honors Theses

This thesis explores the dynamic behavior of suspension systems using a radio-controlled (RC) vehicle as the study unit. By combining experimental drop testing and the Mississippi State Autonomous Vehicle Simulator (MAVS), the research focuses on determining key suspension parameters, including the spring constant and damping coefficient, which define the stiffness and energy dissipation characteristics of the system. The RC vehicle's suspension system provided a controlled platform for studying these dynamics under both real-world and simulated conditions. Experimental drop testing involved capturing the vehicle's response to impact using an accelerometer, while MAVS simulations modeled a controlled compression and release of the …

Enhancing Webtas: From An Atam Simulator To A Developmental Environment, Elizabeth G. Schmidt

Electrical Engineering and Computer Science Undergraduate Honors Theses

As interest in a niche research area, like the abstract Tile Assembly Model (aTAM), grows it is crucial to ensure that simulation tools are accessible and user-friendly for a broad audience. Existing resources can pose challenges for less experienced users, highlighting the need for enhancements that improve usability and functionality. To address these issues, key upgrades to the current online simulation platform, WebTAS, were implemented, including breakpoint functionality and nondeterminism checks, alongside features such as XML file integration, image capturing, and simulation view resets. These enhancements collectively elevate the platform from a basic learning tool to a comprehensive environment for …

Practical Model Of A Labview Controlled Active Magnetic Bearing On A Bently Rotor Kit Validated With Matlab And Msc Adams, Luis Herrera-Delgado

Master's Theses

This thesis aimed to model a rotor supported by an active magnetic bearing (AMB). The magnetic force equation due to a single electromagnet was first derived which served as the basis of AMB modeling. The finalized model utilized Matlab, Simulink, and MSC Adams to simulate a rotor supported by an AMB. Matlab and Simulink were used to model the AMB control system and actuator output. MSC Adams was used to capture the dynamics of a flexible rotor. This model was verified by comparing the model’s simulated vibration to real vibration data measured from a modified Bently Nevada rotor kit equipped …

Simulation-Based Methodology To Investigate The Impact Of Material Type And Compressive Speed Variation On Effective Strain Rate And Springback, Radhi Nurvian Amrullah, Syamsul Hadi, Muhammad Akhlis Rizza

Journal of Mechanical Engineering Science and Technology (JMEST)

To obtain the desired results in the manufacturing process, especially the bending process, the occurrence of springback must be reduced. The effective strain rate must be increased to predict the increase in material. This study uses a simulation method to determine the influence of material type and compressive speed variation on spring back and effective strain rate. This study uses 3 kinds of materials: JIS SPHD, JIS A1100 BE, and JIS SN400A, and speed variations, namely: 90 mm/s, 105 mm/s, and 120 mm/s. This study shows that JIS SN400A material has the smallest springback value compared to JIS A1100 BE …

Friction Modeling Of Composite Brake Pads With Ulin Wood Powder (Eusideroxylon Zwageri), Muhammad Rezki Fitri Putra, Hajar Isworo, Muhamad Noor Yasin, Rachmat Subagyo

Journal of Mechanical Engineering Science and Technology (JMEST)

This study investigates the performance of composite brake pads made of Ulin (Eusideroxylon zwageri) sawdust using simulation modeling, focusing on the pressure distribution, frictional stress, and contact state in five brake pad designs (DS0 to DS4). The brake pad designs used U-shaped grooves to improve cooling efficiency and debris removal. The results show that DS1 and DS2 exhibit the most uniform pressure distribution, with maximum values of 0.045 MPa and 0.048 MPa, respectively. DS1 recorded the highest peak frictional stress at 2.53 × 10-8 MPa, while DS2 showed consistent stress stability, reducing the possibility of uneven wear. DS3 achieved a …

Analysis, Design, And Experimental Validation Of The Thermal Subsystem Of Alainsat-1 Cubesat, Ameereh Seyedzadeh

Thesis/ Dissertation Defenses

This thesis investigates the thermal management techniques of AlAinSat-1 during extremely harsh space conditions. It presents a comprehensive analysis of its thermal behavior using numerical techniques and validates the CubeSat's survivability in space via experimental testing. AlAinSat-1 is a nanocube-shaped satellite carrying Earth observation payloads, including RITA (Remote Sensing and Interference Detector with Radiometry and Vegetation Analysis) and Locana. Understanding how the CubeSat behaves in harsh space conditions and maintains thermal stability during its mission is critical to its success. The main aim of this study is to employ finite element analysis (FEA) techniques to simulate the thermal behavior of …

From A Traditional City To A Smart City: The Measurement Of Cities’ Readiness For Transition, Egypt As A Case Study, Ahmed Hassebo, Mohamed Tealab, Mosaad Hamouda

Publications and Research

The transition from traditional legacy cities to smart cities represents a pivotal juncture in urban development and governance. As cities worldwide grapple with the challenges of rapid urbanization, resource constraints, and the need to enhance the quality of life for their citizens, the concept of a “smart city” has gained significant attention. This paper delves into the multifaceted process of urban transformation, shedding light on the essential criteria and considerations that guide a city’s conversion into a smart city. To provide a comprehensive framework for the conversion process, this paper outlines a computer program utilized to measure the readiness to …

Ignis: A One-Dimensional Laminar Flame Code, Jansen P. Berryhill, Jacob K. Spinti, David O. Lignell

Faculty Publications

Laminar flame codes have an important role in combustion modeling. They can provide a fundamental understanding of flame dynamics and provide a basis for building subgrid scale models in turbulent flow simulations. This paper presents Ignis, an open-source laminar flame code with the capability to offload submodels, like soot formation and radiation, using external packages and libraries. Ignis is written in C++, is documented with Doxygen, and is available on GitHub. It contains three different flame formulations: diffusion flames, premixed flames, and laminar flamelets solved in the mixture fraction coordinate. An option to facilitate creation of a diffusion flame table …

Analysis, Design, And Experimental Validation Of The Thermal Subsystem Of Alainsat-1 Cubesat, Ameereh Seyedzadeh

Theses

This thesis investigates the thermal management techniques of AlAinSat-1 during extremely harsh space conditions. It presents a comprehensive analysis of its thermal behavior using numerical techniques and validates the CubeSat's survivability in space via experimental testing. AlAinSat-1 is a nanocube-shaped satellite carrying Earth observation payloads, including RITA (Remote sensing and Interference detector with radiome-Try and vegetation Analysis) and Locana. Understanding how the CubeSat behaves in harsh space conditions and maintains thermal stability during its mission is critical to its success. The main aim of this study is to employ finite element analysis (FEA) techniques to simulate the thermal behavior of …

Prototyping Interactive Tactile Digital Logic Simulations: A Hybrid Approach, Logan Bateman

MS in Computer Science Project Reports

Tactile exhibits are common in museums and on the walls of university halls. However, few (if any) tools exist for creating tactile exhibits for teaching digital logic or computing concepts. This project implemented a framework for creating tactile digital logic simulation exhibits, with a focus on rapid prototyping and distributed architecture. Prototyping allows for fast iteration, with the ability to simulate unlimited hardware components such as buttons, light emitting diodes (LEDs), and other input or output devices. Through the abstraction of implementations and a distributed communication protocol, switching to real hardware is seamless and works in tandem with simulated hardware. …

Lifetimes Of Stable Solutions To The Planar Three-Body Problem, Revealed In Patterns Of Fractal Art, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

This preliminary study explores statistical prediction of the lifetimes of apparently stable orbits of three particle masses, mutually attracted by gravity in the planar three body problem. Most orbits eventually break up, commonly in an end state with two of the bodies orbiting each other and moving together in one direction, with the third body moving in the opposite direction. Studies of such escape events led to a novel hypothesis, emerging from the intersection of probability, statistics, chaos, and fractal art. Statistical estimates of a constant probability of breakup per unit time allow prediction of the times of breakup of …

Computational Modeling Of High Yttrium Refractory High Entropy Alloy Microstructures, Kaleb C. Ryan, Marissa M. Baker

College of Engineering Summer Undergraduate Research Program

Refractory high entropy alloys (RHEAs) are advanced metals made up of five or more principal elements in roughly equal amounts. The microstructural effects of alloying with yttrium as a principal element for RHEAs are currently not well understood. This project compared RHEA microstructures from literature with simulations using the High Entropy Alloy Predicting Software (HEAPS), which computes 10 screening criteria to predict the microstructure of a RHEA composition. The accuracy of HEAPS predictions was assessed by comparing them with experimentally validated microstructures found in literature. A combination of criteria was found to have a 95.8% accuracy rate, and a new …

Development Of Avalanche Photo Detector For Uv-C Using Gallium Oxide Material System, Md Ghulam Ghulam Zakir

Theses and Dissertations

This work describes the metal-organic chemical vapor deposition (MOCVD) optimization process for epitaxially grown gallium oxide (Ga2O3) layers, electrical field distribution, and the design for Avalanche Photo Detector (APD). MOCVD is a well-accepted process in the semiconductor industry, as it is well-known for its precise deposition of ultra-thin, high-quality semiconductor layers with extraordinary control over composition and thickness. The choice of Ga2O3 is due to r its distinctive properties of ultra-wide bandgap and low turn-on resistance. Thus, Ga₂O₃-based materials can withstand high voltage and current with the least energy loss, making them an attractive choice for …

Editorial: Novel Computational Fluid Dynamics Methods For Diagnosis, Monitoring, Prediction, And Personalized Treatment For Cardiovascular Disease And Cancer Metastasis, Zahra Keshavarz Motamed, Nima Maftoon, Lakshmi Prasad Dasi, John F. Ladisa Jr.

Biomedical Engineering Faculty Research and Publications

No abstract provided.

Cybersecurity, Image-Based Control, And Process Design And Instrumentation Selection, Dominic Messina, Akkarakaran Francis Leonard, Ryan Hightower, Kip Nieman, Renee O'Neill, Paloma Beacham, Katie Tyrrell, Muhammad Adnan, Helen E. Durand

Chemical Engineering and Materials Science Faculty Research Publications

Within an Industry 4.0 framework, a variety of new considerations are of increasing importance, such as securing processes against cyberattacks on the control systems or utilizing advances in image processing for image-based control. These new technologies impact relationships between process design and control. In this work, we discuss some of these potential relationships, beginning with a discussion of side channel attacks and what they suggest about ways of evaluating plant design and instrumentation selection, along with controller and security schemes, particularly as more data is collected and there is a move toward an industrial Internet of Things. Next, we highlight …

Hollow Connecting Rod Thin Wall Austempered Ductile Iron (Twadi) For Manufacturing Light Weight Components, Ricardina Freitas Da Silva, Bambang Suharno, Rianti Dewi Sulamet-Ariobimo

Journal of Materials Exploration and Findings

Efforts made by the automotive industry to reduce energy consumption have encouraged researchers to carry out various studies. One way is to make components lighter by casting thin wall austempered ductile iron (TWADI). Reducing the weight of components such as connecting rods (conrod) will result in lower energy consumption, but provided that these components still meet standards in terms of mechanical properties and microstructure or even exceed them. In this research, design optimization was applied to conrod by making the area I-beam zero mm (hollow), with hope that it can replace conrod Vespa PX-150. While the manufacturing process is divided …

Development Of Electric Vehicle Charging Station Microgrid With Simulation Modelling, Tenzin Lhaden

Open Access Theses & Dissertations

The rapid adoption of electric vehicles (EVs) necessitates innovative solutions to overcome challenges in energy management, sustainability, and grid reliance. This research develops a hybrid simulation model for EV charging stations, integrating renewable energy sources, such as solar photovoltaic (PV) systems, with energy storage systems (ESS). Leveraging discrete-event simulation (DES) and agent-based modeling (ABM) in AnyLogic, the model offers a comprehensive analysis of charging station operations, incorporating stochastic EV arrivals, dynamic energy allocation, and user-defined customization.Key contributions include the development of hybrid simulation model integrating solar PV, energy storage, and energy management systems (EMS) that dynamically optimizes energy distribution from …

Constant-Ph Molecular Dynamics At Inorganic Interfaces: Adding A New Dimension To Simulations Of Interfacial Phenomena., Ted Kalbfleisch

Electronic Theses and Dissertations

This dissertation explores the application of novel molecular dynamics simulation methods to better understand complex systems, with a particular focus on silica materials and protein interactions. Silica materials, known for their versatile surface and solution chemistries, play critical roles in catalysis, chromatography, and wastewater treatment. Despite their widespread use, the molecular-level interactions between silica surfaces and their environments remain poorly understood. To address this knowledge gap, we employed λ-dynamics enabled constant pH molecular dynamics to dynamically model protonation and deprotonation events on silica surfaces. Traditional experimental techniques such as x-ray crystallography, NMR, and cryo-EM are inadequate for probing structures in …

An Emergency Response System To Assist The Movement Of Vehicles During Emergency Operations In Urban Transportation Networks, Jamal Nahofti Kohneh

All Dissertations

Emergency responders need to arrive at the emergency scene as soon as possible, but operating vehicles under emergency conditions can pose a risk to both the responders and other road users, potentially resulting in crashes or delays in emergency operations. In this research, an emergency response system is proposed to assist emergency and non-emergency response vehicles (ERVs and non-ERVs) during emergency operations in a connected vehicle environment. This system collects the information from connected ERVs and non-ERVs, utilizes this information as inputs in the proposed models, and sends instruction messages back to vehicles. The proposed models provide the fastest ERV …