Engineering Commons^™

A Cost-Effective Haptic Device For Assistive And Rehabilitation Purposes, Archana Pradeep

Masters Theses

With the growing population of elderly, the need for assistance has also increased considerably especially for the tasks such as cleaning, reaching and grasping objects among others. There are numerous assistive devices in the market for this group of people. However, they are either too expensive or require overwhelming user effort for manipulation. Therefore, the presented research is primarily concerned with developing a low-cost, easy to use assistive device for elderly to reach and grasp objects through intuitive interface for the control of a slave anthropomorphic robotic arm (tele operator). The system also implements haptic feedback technology that enables the …

Automating The Process Of Fabricating Uniform-Sized Cell Spheroids For Three-Dimensional Bioprinting, Ganesh Sosale

Theses and Dissertations

Although researchers have been able to print small, simple, and avascular tissues, they have been unsuccessful in creating large, complex and vascularized organs. Printing large and complex three-dimensional tissues or organs involves utilizing a large quantity of cellular spheroids and layer-by-layer addition of spheroids. In this study, an in-house cell spheroid fabrication system was developed to produce cell spheroids with human liver cells (hepG2), human endothelial cells (hEC), human neural stem cells (hNSC), and induced pluripotent stem cells (iPSC). It offers the ability of fabricating uniform-sized spheroids repeatedly, which is essential when large and complex structures need to be produced. …

Development Of Workforce Skills: Student Perceptions Of Mentoring In First Robotics, Katie Joan Veal Wallace

Dissertations

In today’s global economy, new workforce competencies are needed for success at both individual and societal levels. The new workforce skills extend beyond basic reading, writing, and arithmetic to include higher order processes such as critical thinking and problem solving. Technical job opportunities have grown by approximately 17%, yet the United States continues to decline in science, technology, engineering and mathematics (STEM) disciplines. Further, U.S. students earn average or below average test scores when compared to other developed countries. Researchers cite the need to incorporate the learning of workplace skills into secondary education curriculum, and advocates call for new teaching …

Designing A Biomimetic Testing Platform For Actuators In A Series-Elastic Co-Contraction System, Ryan Tyler Schroeder

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actuators determine the performance of robotic systems at the most intimate of levels. As a result, much work has been done to assess the performance of different actuator systems. However, biomimetics has not previously been utilized as a pretext for tuning a series elastic actuator system with the purpose of designing an empirical testing platform. Thus, an artificial muscle tendon system has been developed in order to assess the performance of two distinct actuator types: (1) direct current electromagnetic motors and (2) ultrasonic rotary piezoelectric motors. Because the design of the system takes advantage of biomimetic operating principles such as …

Design And Analysis Of Robotically-Controlled Minimally Invasive Surgical Instruments, Jordan D. Tanner

Theses and Dissertations

Robot-assisted minimally invasive surgery is used to perform intricate surgical tasks through small incisions using long, slender instruments. The miniaturization of these instruments is advantageous to both surgeon and patient because smaller instruments reduce trauma to surrounding tissue, decrease patient recovery times, and can be used in confined spaces otherwise inaccessible using larger instruments. However, miniaturization of existing designs is limited by friction between moving parts, the volume occupied by the end effector, and manufacturing and assembly constraints. The objective of this work is to develop and analyze concepts that can be used in robot-assisted needlescopic surgery. The concepts are …

Using Embedded Systems To Determine The Configuration Of A Static Wheelchair Mounted Robotic Arm, Daniel Ashley

USF Tampa Graduate Theses and Dissertations

The calibration of a 9 degree of freedom (DOF) robotic manipulator using multiple three axis accelerometers and an embedded system will be accomplished in this work. The 9-DOF robotic system used in this study is a 7-DOF robotic arm attached to a 2-DOF power wheelchair. Combined they create a Wheelchair Mounted Robotic Arm (WMRA). The problem that will be solved by this thesis is the calibration of the robotic system during start up. The 7 DOF robotic arm is comprised of rotational joints only. These joints have dual channel encoders to determine the joint position, among other useful data. The …

Invariant Inferring And Monitoring In Robotic Systems, Hengle Jiang

School of Computing: Dissertations, Theses, and Student Research

System monitoring can help to detect abnormalities and avoid failures. Crafting monitors for today’s robotic systems, however, can be very difficult due to the systems’ inherent complexity and its rich operating environment.

In this work we address this challenge through an approach that automatically infers system invariants and synthesizes those invariants into monitors. This approach is inspired by existing software engineering approaches for automated invariant inference, and it is novel in that it derives invariants by observing the messages passed between system nodes and the invariants types are tailored to match the spatial, time, temporal, and architectural attributes of robotic …

Vex Robotics, Ho Joon Cha, Joshua Del Real, Jamie Kalb, Thomas Nance, Jenny Yang

Mechanical Engineering Senior Theses

The objective of our project was to design and construct a control system for communication between two autonomous robots, of different size and capabilities, in an environment with numerous obstacles and challenges. These challenges, completed autonomously, involved moving over and under barriers along with the obtainment and transportation of spherical objects. Our project was tied to the VEX Robotics competition environment as we tested our robots by competing at the World Championships. Unfortunately, due to time and budget considerations, we had to scale back our sensor subsystem. This led to a simpler control system than originally intended; however, we were …

Robotic Resistance/Assistance Training Improves Locomotor Function In Individuals Poststroke: A Randomized Controlled Study, Ming Wu, Jill M. Landry, Janis Kim, Brian D. Schmit, Sheng-Che Yen, Jillian Macdonald

Biomedical Engineering Faculty Research and Publications

Objective

To determine whether providing a controlled resistance versus assistance to the paretic leg at the ankle during treadmill training will improve walking function in individuals poststroke.

Design

Repeated assessment of the same patients with parallel design and randomized controlled study between 2 groups.

Setting

Research units of rehabilitation hospitals.

Participants

Patients (N=30) with chronic stroke.

Intervention

Subjects were stratified based on self-selected walking speed and were randomly assigned to the resistance or assistance training group. For the resistance group, a controlled resistance load was applied to the paretic leg at the ankle to resist leg swing during treadmill walking. …

Towards A Sustainable Modular Robot System For Planetary Exploration, S. G. M. Hossain

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis investigates multiple perspectives of developing an unmanned robotic system suited for planetary terrains. In this case, the unmanned system consists of unit-modular robots. This type of robot has potential to be developed and maintained as a sustainable multi-robot system while located far from direct human intervention. Some characteristics that make this possible are: the cooperation, communication and connectivity among the robot modules, flexibility of individual robot modules, capability of self-healing in the case of a failed module and the ability to generate multiple gaits by means of reconfiguration. To demonstrate the effects of high flexibility of an individual …

Toward A Framework For Levels Of Robot Autonomy In Human-Robot Interaction, Jenay Beer, A. D. Fisk, W. A. Rogers

Faculty Publications

Autonomy is a critical construct related to human-robot interaction (HRI) and varies widely across robot platforms. Levels of robot autonomy (LORA), ranging from teleoperation to fully autonomous systems, influence the way in which humans and robots interact with one another. Thus, there is a need to understand HRI by identifying variables that influence—and are influenced by—robot autonomy. Our overarching goal is to develop a framework for LORA in HRI. To reach this goal, our framework draws links between HRI and human-automation interaction, a field with a long history of studying and understanding human-related variables. The construct of autonomy is reviewed …

Analysis Of A Dual Scissored-Pair,Variable-Speed, Control Moment Gyroscope Driven Spherical Robot, Richard Chase

Wayne State University Dissertations

The objective of this research is to compare barycenter offset based designs of spherical robots to control moment gyroscope (CMG) based designs in order to determine which approach is most effective. The first objective was to develop a list of current state of the art designs in order to gain an overall understanding of what the obstacles in this area of research were. The investigation showed that barycenter offset designs can produce a low, continuous output torque, whereas CMG based designs can usually only produce a high, momentary output torque. The second objective was to develop a CMG based design …

A Collaborated Process With A Wireless Autonomous Vehicle At It's Center, Thomas B. Stout, Steve C. Hsiung

Engineering Technology Faculty Publications

Developing partnerships between high schools, community colleges and universities is critical for the successful transitions to a lifelong STEM careers. How do you develop these partnerships? The sharing of a technology platform such as autonomous vehicles can bridge the gap by using a common core group of materials. Collaborations between teachers and faculty indifferent schools that share common interests in teaching control systems and robotics technology can be an excellent start. The university as catalyst in the process by designing the curriculum, system hardware and software then through the common interest deploying them in the high schools and community college. …

Review Of Development Stages In The Conceptual Design Of An Electro Hydrostatic Actuator For Robotics, Velibor Karanović, Mitar Jocanović, Vukica Jovanović

Engineering Technology Faculty Publications

The design of modern robotic devices faces numerous requirements and limitations which are related to optimization and robustness. Consequently, these stringent requirements have caused improvements in many engineering areas and lead to development of new optimization methods which better handle new complex products designed for application in industrial robots. One of the newly developed methods used in industrial robotics is the concept of a self-contained power device, an Electro-Hydrostatic Actuator (EHA). EHA devices were designed with a central idea, to avoid the possible drawbacks which were present in other types of actuators that are currently used in robotic systems. This …

Intelligent Sensing Based On Low Cost Unmanned Aerial Vehicles (Uav) For Bridge Condition Assessment, Theodore Teates, Austin Boyd, Chung-Hao Chen

Electrical & Computer Engineering Faculty Publications

The eventual completion of this project envisions the use of an Unmanned Aerial Vehicle (UAV) to inspect bridge infrastructure. This project may also be expanded to encompass general object detection and inspection in order to unburden this technology so that it may reach its fullest potential. The project requires research and development in three distinct areas of image processing, control structures, and integration of systems. Initial undergraduate research sets the base knowledge for the overall project, explores the areas of concentration that are desired to expand upon in the future project, and provides a base UAV model that new researchers …

Computer-Based Stereoscopic Parts Recognition For Robotic Applications, Ahmad A. Fayed

UNLV Theses, Dissertations, Professional Papers, and Capstones

Most of robotic handling and assembly operations are based on sensors such as range and touch sensors. In certain circumstances, such as in the presence of ionizing radiation where most customary sensors will degrade over time due to radiation exposure, these sensors won't function properly. Utilizing two or more cameras (stereo vision) located outside the target zone and analyzing their images to identify location and dimensions of parts within the robot workspace is an alternative for using sensors. Object Recognition is affected by the light condition which oftentimes causes the gray-scale or red, green, and blue values to have a …

Getting It Right The First Time: Robot Mission Guarantees In The Presence Of Uncertainty, Damian Lyons, Ron Arkin, Paramesh Nirmal, Shu Jiang, Tsung-Ming Liu, Julia Deeb

Faculty Publications

Abstract—Certain robot missions need to perform predictably in a physical environment that may only be poorly characterized in advance. We have previously developed an approach to establishing performance guarantees for behavior-based controllers in a process-algebra framework. We extend that work here to include random variables, and we show how our prior results can be used to generate a Dynamic Bayesian Network for the coupled system of program and environment model. Verification is reduced to a filtering problem for this network. Finally, we present validation results that demonstrate the effectiveness of the verification of a multiple waypoint robot mission using this …

Robotic Fingerspelling Hand For The Deaf-Blind, Jerry Vin

Master's Theses

Because communication has always been difficult for people who are deaf-blind, The Smith-Kettlewell Eye Research Institute (SKERI), in conjunction with the California Polytechnic State University Mechanical Engineering department, has commissioned the design, construction, testing, and programming of a robotic hand capable of performing basic fingerspelling to help bridge the communication gap. The hand parts were modeled using SolidWorks and fabricated using an Objet rapid prototyper. Its fingers are actuated by 11 Maxon motors, and its wrist is actuated by 2 Hitec servo motors. The motors are controlled by Texas Instruments L293D motor driver chips, ATtiny2313 slave microcontroller chips programmed to …

Development Of Pneumatic Robot For Outreach, Eshamogbo E. Ojuba, John Lumkes

The Summer Undergraduate Research Fellowship (SURF) Symposium

To encourage the current generation of high school and middle school students to pursue careers in engineering, it is important to have challenging hands-on engineering activities for them. Such activities should be interesting, compelling, and, most importantly, educative. A mini-excavator was built for fluid power outreach, but this tool only demonstrates fluid power, without showing other important aspects of engineering. The tool being developed is able to demonstrate fluid power, as well as other important aspects of engineering, such as controls, electronics, and programming. This tool is an electronically-controlled device that allows the user control a pneumatic circuit, coupled with …

Measurement And Description Of Dynamics Required For In Vivo Surgical Robotics Via Kinematic Methods, Jacob G. Greenburg

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

With the goal of improved recovery times and reduced trauma to the patient there has been a substantial shift in the medical community’s demand for minimally invasive surgical (MIS) techniques. With the standardization of MIS becoming more commonplace in the medical field there are still many improvements that are desired. Traditional, manual methods of these surgeries require multiple incisions on the abdomen for the tools and instruments to be inserted. The more recent demand has been to localize the incisions into what is being referred to as a Laparoendoscopic Single-Site (LESS) surgery. Furthermore, the manual instruments that are commonly used …

Modeling A Sensor To Improve Its Efficacy, Nabin K. Malakar, Daniil Gladkov, Kevin H. Knuth

Physics Faculty Scholarship

Robots rely on sensors to provide them with information about their surroundings. However, high-quality sensors can be extremely expensive and cost-prohibitive. Thus many robotic systems must make due with lower-quality sensors. Here we demonstrate via a case study how modeling a sensor can improve its efficacy when employed within a Bayesian inferential framework. As a test bed we employ a robotic arm that is designed to autonomously take its own measurements using an inexpensive LEGO light sensor to estimate the position and radius of a white circle on a black field. The light sensor integrates the light arriving from a …

Fully Compliant Mechanisms For Bearing Subtraction In Robotics And Space Applications, Ezekiel G. Merriam

Theses and Dissertations

Robotics and space applications represent areas where compliant mechanisms can continue to make a significant impact by reducing costs and weight while improving performance. Because of the nature of these applications, a common need is for bearing replacement mechanisms, or mechanisms that perform the function of a bearing without the complexity and failure modes associated with bearings. Static balancing is a design strategy that attempts to reduce the actuation effort of a mechanism, and has been applied to compliant mechanisms in some applications. Monolithic construction, especially by means of 3D printing technology, is a strategy whereby the mechanism links and …

Caddy: A 2005 Roborodentia Entry With Vision And Path Planning Abilities, Taylor Braun-Jones

Computer Engineering

Roborodentia is an autonomous robotics competition held each year during Cal Poly’s Open House. For the 2005 competition, robot entries needed to navigate a maze searching for three randomly placed golf balls, collect them, and then deposit the balls in the “nest” at the end of the maze. A newly added aspect for the 2005 competition included two bonus balls that were placed on a platform behind the wall in two predetermined corners of the maze.

Caddy is a robot that was entered into the 2005 Roborodentia competition. Caddy included a vision system that allowed searching for balls down untraveled …

A Robotic Neuro-Musculoskeletal Simulator For Spine Research, Robb W. Colbrunn

ETD Archive

An influential conceptual framework advanced by Panjabi represents the living spine as a complex neuromusculoskeletal system whose biomechanical functioning is rather finely dependent upon the interactions among and between three principal subsystems: the passive musculoskeletal subsystem (osteoligamentous spine plus passive mechanical contributions of the muscles), the active musculoskeletal subsystem (muscles and tendons), and the neural and feedback subsystem (neural control centers and feedback elements such as mechanoreceptors located in the soft tissues) [1]. The interplay between subsystems readily encourages "thought experiments" of how pathologic changes in one subsystem might influence another--for example, prompting one to speculate how painful arthritic changes …

Evolutionary Ground Reaction Force Control Of A Prosthetic Leg Testing Robot, Ronald Davis.

ETD Archive

Typical tests of prosthetic legs for transfemoral amputees prove to be cumbersome and tedious. These tests are burdened by acclimation time, lack of repeatability between subjects, and the use of complex gait analysis labs to collect data. To create a new method for prosthesis testing, we design and construct a robot that can simulate the motion of a human hip. We discuss the robot from concept to completion, including methods for modeling and control design. Two single-input-single-output (SISO) sliding mode controllers are developed using analytical and experimental methods. We use human gait data as reference inputs to the controller. When …

Human Intention Recognition Based Assisted Telerobotic Grasping Of Objects In An Unstructured Environment, Karan Hariharan Khokar

USF Tampa Graduate Theses and Dissertations

In this dissertation work, a methodology is proposed to enable a robot to identify an object to be grasped and its intended grasp configuration while a human is teleoperating a robot towards the desired object. Based on the detected object and grasp configuration, the human is assisted in the teleoperation task. The environment is unstructured and consists of a number of objects, each with various possible grasp configurations. The identification of the object and the grasp configuration is carried out in real time, by recognizing the intention of the human motion. Simultaneously, the human user is assisted to preshape over …

Evolving Predator Control Programs For An Actual Hexapod Robot Predator, Gary Parker, Basar Gulcu

Computer Science Faculty Publications

In the development of autonomous robots, control program learning systems are important since they allow the robots to adapt to changes in their surroundings. Evolutionary Computation (EC) is a method that is used widely in learning systems. In previous research, we used a Cyclic Genetic Algorithm (CGA), a form of EC, to evolve a simulated predator robot to test the effectiveness of a learning system in the predator/prey problem. The learned control program performed search, chase, and capture behavior using 64 sensor states relative to the nearest obstacle and the target, a simulated prey robot. In this paper, we present …

Design, Analysis And Testing Of Haptic Feedback System For Laparoscopic Graspers In In Vivo Surgical Robots, Nikhil Salvi

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Laparo-Endoscopic Single Site (LESS) Robotics Surgery is an advanced technology in the field of Minimally Invasive Surgery (MIS). The LESS surgical robots significantly improve the surgeon’s accuracy, dexterity and visualization, and reduce the invasiveness of surgical procedure results in faster recovery time and improved cosmetic results. In a standard robotic endosurgery, the palpation of tissues is performed by laparoscopic graspers located at the end effectors. The master-slave configuration in robotic surgery leads in remote access to the operation site. Therefore, surgeon’s ability to perceive valuable sensory information is severely diminished. Sensory information such as haptics, which is essential for safe …

Design And Implementation Of The Kinect Controlled Electro-Mechanical Skeleton (K.C.E.M.S), Jason Richard Ekelmann

Doctoral Dissertations and Master's Theses

Mimicking real-time human motion with a low cost solution has been an extremely difficult task in the past but with the release of the Microsoft Kinect motion capture system, this problem has been simplified. This thesis discusses the feasibility and design behind a simple robotic skeleton that utilizes the Kinect to mimic human movements in near real-time. The goal of this project is to construct a 1/3-scale model of a robotically enhanced skeleton and demonstrate the abilities of the Kinect as a tool for human movement mimicry. The resulting robot was able to mimic many human movements but was mechanically …

Robotron, Fabian Rodriguez, Oscar Daniel Muneton, Adelaido Jimenez

Computer Engineering

Roborodentia 2012 is a competition where students and alumni could build an autonomous robot to perform a certain task for points. This report is about Robotron, the 3rd place winner of this competition, and how it came to be.