Engineering Commons^™

Bioactive Poly(Beta-Amino Ester) Biomaterials For Treatment Of Infection And Oxidative Stress, Andrew L. Lakes

Theses and Dissertations--Chemical and Materials Engineering

Polymers have deep roots as drug delivery tools, and are widely used in clinical to private settings. Currently, however, numerous traditional therapies exist which may be improved through use of polymeric biomaterials. Through our work with infectious and oxidative stress disease prevention and treatment, we aimed to develop application driven, enhanced therapies utilizing new classes of polymers synthesized in-house. Applying biodegradable poly(β-amino ester) (PBAE) polymers, covalent-addition of bioactive substrates to these PBAEs avoided certain pitfalls of free-loaded and non-degradable drug delivery systems. Further, through variation of polymer ingredients and conditions, we were able to tune degradation rates, release profiles, cellular …

Slip-Jump Model For Carbon Combustion Synthesis Of Complex Oxide Nanoparticles, A. A. Markov, Mkhitar A. Hobosyan, Karen S. Martirosyan

Physics & Astronomy Faculty Publications

Carbon Combustion Synthesis of Oxides (CCSO) is a promising method to produce submicron- and nano- sized complex oxides. The CCSO was successfully utilized for producing several complex oxides, a complete theoretical model including the sample porosity, fl ow parameters and reaction energetics is needed to predict the combustion parameters for CCSO. In this work, we studied the ignition temperature and combustion wave axial temperature distribution, activation energy, combustion heat and thermal losses for a typical CCSO synthesis for cylindrical samples of Ni-Zn ferrites with high (>85%) porosity. We developed a two level combustion model of chemically active nano-dispersed mixture, …

Molecularly Targeted Nanoparticles For Modulation Of Inflammatory Mediators In Atherosclerosis, Rohun Udatta Palekar

McKelvey School of Engineering Graduate Student Theses & Dissertations

The enzyme thrombin has been demonstrated through experimental and clinical studies to play a crucial role in mediating both inflammation and thrombosis in atherosclerosis. The cellular effects of thrombin in promoting atherosclerosis involve the activation of signaling pathways that result in the secretion of a host of various chemokines, cytokines, cell adhesion molecules, etc. that promote vascular inflammation. Due in part to thrombin and other pro-atherogenic molecules, this prolonged inflammatory state in atherosclerosis results in the deterioration of the endothelium, increasing the risk of focal thrombosis. Current treatment strategies to address the role of thrombin in atherosclerosis, despite efficacy of …

Synthesis And Functional Evaluation Of Peptide Modified Poly (Lactic-Co-Glycolic Acid) Nanoparticles To Inhibit Porphyromonas Gingivalis Biofilm Formation., Paridhi Kalia

Electronic Theses and Dissertations

Periodontal disease is an oral inflammatory disorder that afflicts roughly 46% of the adults in the U.S. Currently, treatment of periodontal disease involves the removal of plaque from the gingival pocket (with possible antibiotic treatment) and if necessary, gingival surgery. To our knowledge, no therapeutic approach exists that promotes host-biofilm homeostasis by limiting pathogen recolonization of the oral cavity after prophylaxis or treatment. The interaction of the pathogen Porphyromonas gingivalis with commensal streptococci is critical for initiation of periodontitis and represents a target for limiting P. gingivalis colonization of the oral cavity. Previous studies showed that a synthetic peptide …

Toward Higher-Order Mass Detection: Influence Of An Adsorbate’S Rotational Inertia And Eccentricity On The Resonant Response Of A Bernoulli-Euler Cantilever Beam, Stephen M. Heinrich, Isabelle Dufour

Civil and Environmental Engineering Faculty Research and Publications

In this paper a new theoretical model is derived, the results of which permit a detailed examination of how the resonant characteristics of a cantilever are influenced by a particle (adsorbate) attached at an arbitrary position along the beam’s length. Unlike most previous work, the particle need not be small in mass or dimension relative to the beam, and the adsorbate’s geometric characteristics are incorporated into the model via its rotational inertia and eccentricity relative to the beam axis. For the special case in which the adsorbate’s (translational) mass is indeed small, an analytical solution is obtained for the particle-induced …

In Vacuo Fabrication And Electronic Structure Characterization Of Atomic Layer Deposition Thin Films, Michael Schaefer

USF Tampa Graduate Theses and Dissertations

Improvement of novel electronic devices is possible by tailor-designing the electronic structure at device interfaces. Common problems observed at interfaces are related to unwanted band alignment caused by the chemical diversity of interface partners, influencing device performance negatively. One way to address this problem is by introducing ultra-thin interfacial dipole layers, steering the band alignment in a desired direction. The requirements are strict in terms of thickness, conformity and low density of defects, making sophisticated deposition techniques necessary. Atomic layer deposition (ALD) with its Ångstrom-precise thickness control can fulfill those requirements.

The work presented here encompasses the implementation of an …

Size-Dependent Mechanical Properties Of Crystalline Nanoparticles, Dan | Mordehai

Nanomechanical Testing in Materials Research and Development V

Defect-free crystalline nanostructures reach strengths which are close to their ultimate shear strength, since their deformation is controlled by dislocation nucleation from the surfaces. In this talk we examine how the size and shape of defect-free nanoparticles affect their mechanical properties. In the first part we discuss the indentation response. Earlier experiments on Au nanoparticles showed that they become easier to indent as they are smaller [1]. With large scale Molecular Dynamics Simulations, we show how the lateral dimensions give rise to size effect in indentation through the competition between dislocation storage and depletion on free surfaces. The latter mechanism …

Dissolution Of Chalcogens In Amine Thiol Solvents For Use In Nanoparticles, Gaurav A. Mittal, Caleb K. Miskin, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lead chalcogenide quantum dots have been shown to be ideal materials for solar cells due to their tunable band gap. Developing a dissolution procedure for chalcogens will help lower the production cost of the solar cells produced by the associated nanoparticles. Dissolution was performed in both aqueous and nonaqueous solutions. Precursors for sulfur and selnium were dissolved in both the aqueous solution of ammonium thioglycolate and ammonium hydroxide and in combinations of amines and thiols. Precursors for tellurium were dissolved in ethylenediamine and different thiols. Lead telluride forms larger microparticles that can be suitable for thermoelectric devices. The optimum solutions …

Carbon Dioxide Sequestration To Form Calcium Carbonate Nanoparticles, Krista E. Stump, Michael T. Harris

The Summer Undergraduate Research Fellowship (SURF) Symposium

The emission of carbon dioxide caused by burning fossil fuels is one of the leading sources of global warming. Reducing the amount of CO₂ released into the atmosphere through carbon sequestration can mitigate this problem. One method of carbon sequestration is the use of a carbon dioxide scrubber. Once captured, CO₂ can be used to create a valuable chemical commodity such as calcium carbonate nanoparticles. To create CaCO₃ particles in the 50-100 nanometer range, a chemical additive is necessary to limit particle size. The study used a laboratory scale carbon dioxide scrubber to react CO₂ with …

The Electroreduction Of Carbon Dioxide On Porous Copper Nanoparticles, Monica Alisa Padilla

Chemical and Biological Engineering ETDs

Copper nanoparticles of porous, controlled structure were synthesized using the sacrificial support method (SSM). The precursor weight percent (wt%) of copper (Cu) and fumed silica (EH-5) was varied to determine the optimum ratio for this material. The precursors were reduced at i) 350°C in a 7% H2 atmosphere and ii) at 250°C in a 100% H2 atmosphere. The specific surface areas of the nanoparticles was measured by Brunauer-Emmett-Teller N2 absorption. The morphologies and widths of the nanoparticles were confirmed by imaging the nanoparticles by scanning electron microscopy (SEM). The bulk composition of the nanoparticles was determined by X-ray diffraction (XRD). …

Engineering Of Lipid Nanoparticles For Advanced Drug Deilvery Applications, Stephen L. Hayward

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

‘Nanomedicine’, the application of nanotechnology principles to the field of medicine, has stimulated the development of nano-platforms for next generation drug delivery. By exploiting nanoscale properties of materials to selectively alter intrinsic characteristics of therapeutics, researchers have improved the efficacy and pharmacokinetic profiles for a variety of drug types. Despite preliminary commercial and clinical success, there still remains a need to develop an improved delivery platform that can provide high cargo entrapment, efficient intracellular delivery, evasion of intracellular degradation pathways, and provide cell population specific targeting.

In this study we engineered a nanocarrier system composed of a core bilayer structure …

In Vitro Studies Of Gold And Gold Silica Nanoparticle Radiosensitization With Kilovoltage X-Rays, Gregory Colarch

UNLV Theses, Dissertations, Professional Papers, and Capstones

Technological advances in the ability to construct and manipulate nanoscale particles have opened up the possibility of using solid metallic nanoparticles and mixed metal nanoshells as a means to increase dose enhancement and treatment efficacy to tumors. In order for nanoparticles to be an effective form of treatment, they must be delivered to tumors in sufficient concentrations so that there is a dose enhancement factor due to ionizing radiation, as well as being essentially non-toxic to healthy cells. Gold nanoparticles and silica-gold nanoshells fit these requirements. Gold has a high atomic number (Z=79), which gives a larger cross section for …

Control Of Fluid Dynamics By Nanoparticles In Laser Melting, Chao Ma, Lianyi Chen, Jiaquan Xu, Jingzhou Zhao, Xiaochun Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Effective control of fluid dynamics is of remarkable scientific and practical significance. It is hypothesized that nanoparticles could offer a novel means to control fluid dynamics. In this study, laser melting was used to investigate the feasibility of tuning fluid dynamics by nanoparticles and possibly breaking existing limits of conventional laser processing techniques. Alumina nanoparticles reinforced nickel samples, fabricated through electrocodeposition, were used for laser melting experiments. Since the melt pool surface is controlled by the fluid dynamics, surface topographies were carefully studied to reveal the nanoparticle effect on the fluid dynamics. Characterizations of surface topographies and microstructures of pure …

On Thermal Aging Prevention In Polymer Core Composite Conductor Rods, Joe D. Hoffman

Electronic Theses and Dissertations

Increased energy usage in the United States and worldwide is driving the demand for new technologies to transmit electrical power in greater quantities and with reliable, safe, and more efficient methods. One recent innovation is to replace the standard Aluminum Conductor Steel Reinforced electrical transmission conductor with a new conductor design that utilizes a fiber reinforced polymer core rod to support a fully annealed aluminum conductor. This new technology that includes a hybrid carbon fiber/epoxy and glass fiber/epoxy support core allows for better efficiency and for greater current to be transmitted in the same size and weight line. These new …

Using Natural Language Processing Techniques To Inform Research On Nanotechnology, Nastassja A. Lewinski, Bridget T. Mcinnes

Chemical and Life Science Engineering Publications

Literature in the field of nanotechnology is exponentially increasing with more and more engineered nanomaterials being created, characterized, and tested for performance and safety. With the deluge of published data, there is a need for natural language processing approaches to semi-automate the cataloguing of engineered nanomaterials and their associated physico-chemical properties, performance, exposure scenarios, and biological effects. In this paper, we review the different informatics methods that have been applied to patent mining, nanomaterial/device characterization, nanomedicine, and environmental risk assessment. Nine natural language processing (NLP)-based tools were identified: NanoPort, NanoMapper, TechPerceptor, a Text Mining Framework, a Nanodevice Analyzer, a Clinical …

Characterization Of Metallic And Semimetallic Oxide Nanoparticles In Industrial Wastewater And Associated Toxicity, Gary Roth

Legacy Theses & Dissertations (2009 - 2024)

Engineered nanomaterials (ENMs) play an increasing role in manufacturing and consumer products. Currently, there is no standard approach to studying ENM toxicity, and a growing body of literature suggests that ENMs may have toxicity differing from similar compounds in bulk or dissolved form. I examined ENMs used in the semiconductor manufacturing process called chemical-mechanical planarization (CMP) for their properties, removal in the wastewater treatment system (WWT), in-vitro toxicity, and location post-inhalation in-vivo. It was found that ENMs in CMP slurries have morphology determined by their elemental composition, but assessment of size and concentration can differ substantially between accepted techniques. Particles …

Inhalable Nanocomposites And Anticancer Agents For Cancer Therapy, Nathanael A. Stocke

Theses and Dissertations--Chemical and Materials Engineering

Cancer is designated as the leading cause of mortality worldwide and lung cancer is responsible for nearly 30% of all cancer related deaths. Over the last few decades mortality rates have only marginally increased and rates of recurrence remain high. These factors, among others, suggest the need for more innovative treatment modalities in lung cancer therapy. Targeted pulmonary delivery is well established for treating pulmonary diseases such as asthma and provides a promising platform for lung cancer therapy. Increasing local deposition of anticancer agents (ACAs) and reducing systemic exposure of these toxic moieties could lead to better therapeutic outcomes and …

An Exploration Of Plasmonics For Nanoparticle-Based Gene Delivery, Corey Raymond Landry

LSU Master's Theses

The spatiotemporal control of biological processes, especially cell growth and differentiation, remains one of the most compelling challenges in basic and clinical biomedical research. Fields as diverse as cancer therapy and regenerative medicine rely on spatial and temporal control of biochemical cues to achieve desired biological objectives. MicroRNA are attractive for highly-localized delivery applications because their instability in the cell restricts their biological effect to a small target area. These short, non-coding strands can be easily synthesized and modified for attachment and release from nanoparticle delivery vehicles. The research interest around microRNA therapies has produced a wide array of pathways …

Antioxidant Activity Of Lutein Entrapped In Poly (Dl-Lactide Co-Glycolide) Acid And Plga/Chitosan Nanoparticles, Toni Borel Lousteau

LSU Master's Theses

Polymeric nanocarriers improve cellular uptake, stability, solubility, and functionality of entrapped drugs and nutraceuticals. The hypothesis of this study was that entrapping lutein, a hydrophobic antioxidant, in different polymeric nanoparticles (NPs) will improve its stability and antioxidant activity. The following objectives were proposed: 1. Synthesize and characterize polymeric nanoparticles of poly lactic co-glycolic acid (PLGA) and PLGA NPs covered with a layer of chitosan (PLGA/Chi) from a physicochemical perspective, and 2. Assess functionality of the entrapped lutein as a function of type of polymer in which entrapped. Nanoparticles were synthesized by emulsion evaporation method. Characterization included size, zeta potential, and …

Optimization Of Polydopamine Coatings, Helen C. Terrill Ms.

Williams Honors College, Honors Research Projects

Polydopamine coatings were fabricated onto the surfaces of glass slides, silicon wafers, and Teflon pieces. A method to change surface properties was optimized, providing a new way of using substrates by means of make-over surface properties. The technology has a wide range of potential approaches including high performance coatings and biomedical surfaces. The experiments can be conducted with various types of surface modifications to make surfaces hydrophilic, hydrophobic, conductive, or magnetic. The changes of film thickness and surface energy as functions of incubation time were quantified by means of ellipsometry, profilometry, and contact angle measurements. The use of primer polydopamine …

Hierarchical Porous Structures With Aligned Carbon Nanotubes As Efficient Adsorbents And Metal-Catalyst Supports, Hema Vijwani

Browse all Theses and Dissertations

The overall goal of this study is two-fold: synthesis of multiscale nanostructures by growing aligned carbon nanotubes on porous foam substrates and investigation of their applicability as adsorbents and catalyst supports for environmental remediation applications. High purity, vertically-aligned arrays of carbon nanotubes (CNT) are grown on open-cell interconnected porous carbon foams by pre-activating them with an oxide buffer layer followed by chemical vapor deposition (CVD). This type of hierarchical morphology provides the capability of increasing surface area by several orders of magnitude, while tuning its morphology for targeted applications. Analytical models are also proposed in this study for specific surface …

Thermosensitive Gel Containing Cellulose Acetate Phthalate-Efavirenz Combination Nanoparticles For Prevention Of Hiv-1 Infection, Abhijit A. Date, Annemarie Shibata, Emily Mcmullen, Krista La Bruzzo, Patrick Bruck, Michael Belshan, You Zhou, Christopher J. Destache

Nebraska Center for Biotechnology: Faculty and Staff Publications

The objective of this investigation was to develop and evaluate a nano-microbicide containing a combination of cellulose acetate phthalate (HIV-1 entry inhibitor) and efavirenz (anti-HIV agent) for HIV prophylaxis. Cellulose acetate phthalate-efavirenz combination nanoparticles (CAP-EFV-NPs) were fabricated by the nanoprecipitation method and were characterized for particle size, zeta potential and encapsulation efficiency of efavirenz. CAP-EFV-NPs were incorporated into a thermosensitive gel (CAP-EFV-NP-Gel). CAP-EFV-NPs, CAP-EFV-NP-Gel and efavirenz solution were evaluated for cytotoxicity to HeLa cells and for in vitro short-term (1-day) and long-term (3-day) prophylaxis against HIV-1 infection in TZM-bl cells. CAP-EFV-NPs had size < 100 nm, negative surface charge and encapsulation efficiency of efavirenz was > 98%. CAP-EFV-NPs and CAP-EFV-NP-Gel were significantly less …

Investigation Of Lanthanide-Doped Anatase Tio2 Core-Shell Nanoparticles For Photocatalysis And Gas Sensing, Rezwanur Rahman

Graduate Theses/Dissertations

Anatase TiO2 has been shown to be potential applications for photo-remediation of chemical waste as well as for photocatalytic splitting of water. The catalytic properties of TiO2 materials can be modified by doping with lanthanide (Ln) ions. In order to minimize the distortion and/or change of the structure of TiO2 nanoparticles, surface doping of anatase TiO2 nanoparticles (~ 14 nm) with several Ln ions (Nd3+, Gd3+, Eu3+, Yb3+) has been successfully made. X-ray diffraction (XRD) and Raman characterization shows that the anatase phase of treated nanoparticles is well preserved. Scanning electron microscopy (SEM) shows that the majority of the nanoparticles …

Creation Of An Annotated Library On Fda Approved Nanomedicines, Marley R. Hodson, Tanin Izadi, Nastassja Lewinski Ph.D, Bridget T. Mcinnes Ph.D

Undergraduate Research Posters

Nanomedicine is a type of nanotechnology used in the medical field to limit the dosage amount and target drug delivery to specific cells. Nanomedicines that are approved and used tend to be extremely successful; however despite over a decade of research, only a limited number of nanomedicines have advanced for clinical use. A possible reason for the numerous nanomedicine failures is lack of easily accessible information and research on previous nanomedicines. In this project, we have compiled nanomedicine labeling information from the Drugs@FDA website. We have extracted phrases/sentences from labels relating to keywords on nanomaterial properties and drug profile characteristics. …

Enhanced Magnetoimpedance And Microwave Absorption Responses Of Soft Ferromagnetic Materials For Biodetection And Energy Sensing, Jagannath Devkota

USF Tampa Graduate Theses and Dissertations

A combination of magnetic sensors with magnetic nanoparticles offers a promising approach for highly sensitive, simple, and rapid detection of cancer cells and biomolecules. The challenge facing the field of magnetic biosensing is the development of low-cost devices capable of superconducting quantum interference device (SQUID)-like field sensitivity at room temperature. In another area of interest, improving the sensitivity of existing electromagnetic field sensors for microwave energy sensing applications is an important and challenging task. In this dissertation, we have explored the excellent magnetoimpedance and microwave absorption responses of soft ferromagnetic amorphous ribbons and microwires for the development of high-performance magnetic …

Fabrication And Characterization Of Silver- And Copper-Coated Nylon 6 Forcespun Nanofibers By Thermal Evaporation, Dorina M. Mihut, Karen Lozano, Heinrich D. Foltz

Mechanical Engineering Faculty Publications

Silver and copper nanoparticles were deposited as thin films onto substrates consisting of Nylon 6 nanofibers manufactured using forcespinningR equipment. Different rotational speeds were used to obtain continuous nanofibers of various diameters arranged as nonwoven mats. The Nylon 6 nanofibers were collected as successive layers on frames, and a high-vacuum thermal evaporation method was used to deposit the silver and copper thin films on the nanofibers. The structures were investigated using scanning electron microscopy–scanning transmission electron microscopy, atomic force microscopy, x-ray diffraction, and electrical resistance measurements. The results indicate that evaporated silver and copper nanoparticles were successfully deposited on Nylon …

Nanotechnology And Additive Manufacturing Platforms For Clinical Medicine: An Investigation Of 3d Printing Bioactive Constructs And Halloysite Nanotubes For Drug Delivery And Biomaterials, Jeffery A. Weisman

Doctoral Dissertations

Personalized medicine requires the development of new technologies for controlled or targeted drug delivery. Three-dimensional (3D) printing and additive manufacturing techniques can be used to generate customized constructs for bioactive compound delivery. Nanotechnology in the form of nanoparticles, used as a stand-alone construct or for material enhancements, can significantly improve established biomaterials such as PMMA based bone cements or enable new technology to have enhanced capabilities. Combinations of the technologies can be used in such applications as infectious disease treatments, chemotherapeutic targeted drug delivery or targeted delivery of nearly any bioactive compound.

Chemotherapeutic or antibiotic enhanced 3D printing filaments were …

The Kinetics Of A Palladium Precursor – Tobacco Mosaic Virus Reaction, Adi Banerjee, Mayo Adigun, Michael T. Harris

The Summer Undergraduate Research Fellowship (SURF) Symposium

There have been numerous developments in the field of production of metallic nanoparticles using biotemplates such as the Tobacco Mosaic Virus (TMV). Past research has looked at the conditions required to maximise nanoparticle formation. This study of the kinetics of a nanomaterial synthesis reaction using a biotemplate would elucidate the understanding of the controlled growth of nanoparticles, which can be applied in the fabrication of photocatalysts, electrical nanocircuits and solar cells. This study specifically focuses on the reaction between a palladium precursor and the TMV without an external reducing agent, where the palladium ion concentration is measured over time using …

Stability Of Aqueous Dispersions Of Titanium Dioxide Against Sedimentation And Aggregation, Guanrong Bai, Xilan Zhu, Elias I. Franses, David S. Corti, Yung-Jih Yang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Particles of titanium dioxide (TiO₂) are widely used as white pigments in paints and inks, due to their brightness and high refractive index. Yet, with TiO₂ having a high density (4.2 g/cm³), particles with typical sizes of 300 nm sediment rapidly even before significant agglomeration can occur. Thus, increasing the stability of TiO2 dispersions against sedimentation as well as aggregation is important. We studied the effect of sodium dodecyl sulfate (SDS), a commonly used dispersant, on the stability of aqueous dispersions of TiO₂ with weight fractions from 0.01 to 40. The sedimentation time of …

Nanoscale Manipulation Of Pristine And Functionalized Freestanding Graphene Using Scanning Tunneling Microscopy, Matthew Ackerman

Graduate Theses and Dissertations

Over the past ten years the 2D material graphene has attracted an enourmous amount of attention from researchers from across diciplines and all over the world. Many of its outstanding electronic properties are present only when it is not interacting with a substrate but is instead freestanding. In this work I demonstrate that pristine and functionalized freestanding graphene can be imaged using a scanning tunneling microscope (STM) and that imaging a flexible 2D surface is fundamentally different from imaging a bulk material due to the attraction between the STM tip and the sample. This attraction can be used to manipulate …