Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Nanoparticles

Discipline
Institution
Publication Year
Publication
Publication Type
File Type

Articles 271 - 300 of 477

Full-Text Articles in Engineering

Nanomedicine Drug Delivery Across Mucous Membranes, Michael G. Lancina Iii Jan 2017

Nanomedicine Drug Delivery Across Mucous Membranes, Michael G. Lancina Iii

Theses and Dissertations

NANOMEDECINE DRUG DELIVERY ACROSS MUCOUS MEMBRANES

By Michael G. Lancina III

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at Virginia Commonwealth University.

Virginia Commonwealth Univeristy, 2017.

Major Director: Dr. Hu Yang, Associate Professor, Chemical and Life Science Engineering

Control over the distribution of therapeutic compounds is a complex and somewhat overlooked field of pharmaceutical research. When swallowing a pill or receiving an injection, it is commonly assumed that drug will spread throughout the body in a more or less uniform concentration and find its way to wherever it is needed. In …


Synthesis, Characterization, And Enhanced Magnetic Properties Of Iron Carbide Nanomaterials, Brent M. Williams Jan 2017

Synthesis, Characterization, And Enhanced Magnetic Properties Of Iron Carbide Nanomaterials, Brent M. Williams

Theses and Dissertations

Permanent magnets are classified as hard magnetic materials with the main purpose of generating flux for applications such as electric motors, turbines, and hard drives. High coercivity, magnetic remanence, and saturation values with high stability are some of the requirements for permanent magnets. Rare-earth magnets including neodymium and samarium based magnets are known to have superior magnetic properties due to their high magnetocrystalline anisotropy. However, due to the price of rare-earth materials development of alternate permanent magnets composed of inexpensive materials is an ongoing process. Previously cobalt carbide (CoxC) have shown promise as a potential rare-earth free magnet …


Green Synthesis Of Copper Oxide Nanoparticles In Aqueous Medium As A Potential Efficient Catalyst For Catalysis Applications, Waad Mohsen, M. A. Sadek, Hany A. Elazab Jan 2017

Green Synthesis Of Copper Oxide Nanoparticles In Aqueous Medium As A Potential Efficient Catalyst For Catalysis Applications, Waad Mohsen, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, we have developed a reliable green method for the synthesis of copper oxide nanoparticles as a potential efficient catalyst for several catalysis applications. In our experimental approach, microwave-assisted synthesis technique was used in order to perform chemical reduction of copper salt using hydrazine hydrate as a strong reducing agent. The prepared catalyst was characterized using various techniques showing the formation of well dispersed copper oxide nanoparticles. The synthesized Copper oxide catalyst shows many advantages including the use of environmentally benign solvent systems, green synthetic approach, and mild reaction conditions.


Study Of Stability And Thermal Conductivity Of Nanoparticles In Propylene Glycol, Sumit Mahajan Jan 2017

Study Of Stability And Thermal Conductivity Of Nanoparticles In Propylene Glycol, Sumit Mahajan

All Graduate Theses, Dissertations, and Other Capstone Projects

This thesis studied the effects of gravity induced settling, thermophoresis and Brownian motion on the thermal conductivity of the Aluminum Oxide (Al2O3) nanofluids. The base fluid was propylene glycol. The effects were studied by making three samples with volumetric percentages of 0.2 %, 2% and 3% Al2O3 in propylene glycol. Sets of 22 experiments were conducted over time to understand the behavior of settling. All samples were manually mixed each time the experiment was conducted. A Thermtest Transient Plane Source TPS 500S was used to measure the thermal conductivity. Volumetric percentages and diameters of nanoparticle were chosen so that the …


Titanium Nanoparticles Synthesized Via Hydrothermal Reaction, Kyle W. Hodge Jan 2017

Titanium Nanoparticles Synthesized Via Hydrothermal Reaction, Kyle W. Hodge

Williams Honors College, Honors Research Projects

The main goal of this project was to determine if increasing the time and temperature of a hydrothermally reacted titanium nanotube would increase the size of the nanotubes. Five experiments were conducted while varying the time and temperature of the reaction: 120°C for 24 hours, 120°C for 48 hours, 150°C for 24 hours, 180°C for 24 hours, and 180°C for 48 hours. Following the synthesis of all of these samples x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS) analyses were performed. The XRD analysis revealed anatase titanium nanoparticles formed in the 120°C and 150°C samples, this could …


Modified Pamam Dendrimers In Tunable Drug-Delivery Systems: A Sustained-Release Dendrimer Hydrogel For Anti-Glaucoma Drugs And Surface-Engineered Macrophages As Nanoparticle Carriers For Targeted Anti-Cancer Therapy, Christopher A. Holden Jan 2017

Modified Pamam Dendrimers In Tunable Drug-Delivery Systems: A Sustained-Release Dendrimer Hydrogel For Anti-Glaucoma Drugs And Surface-Engineered Macrophages As Nanoparticle Carriers For Targeted Anti-Cancer Therapy, Christopher A. Holden

Theses and Dissertations

Two specific drug-delivery applications were sought in this work using polyamidoamine (PAMAM) dendrimers. One drug-delivery system used a novel dendrimer hydrogel (DH) for sustained delivery of anti-glaucoma drugs. In this work, PAMAM G3.0 dendrimers were covalently bonded with poly(ethylene glycol) (PEG­12000) molecules which were subsequently acrylated, resulting in photocurable DH conjugates. For pharmacological studies, DH were loaded with a solution of intraocular pressure lowering drugs, brimonidine and timolol maleate, and were characterized for in vitro release and ex vivo transport and uptake. DH formulations were shown to increase the loading of drug molecules, increase transcorneal drug delivery, and …


Novel Contrasts In Photoacoustic Tomography, Ruiying Zhang Dec 2016

Novel Contrasts In Photoacoustic Tomography, Ruiying Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Photoacoustic tomography (PAT) combines rich optical contrast and high ultrasonic resolution in optically scattering tissue at depths. Taking advantage of its 100% sensitivity to optical absorption, PAT has been widely applied to structural, functional and molecular imaging, with both endogenous and exogenous contrasts, at superior depths than pure optical methods. This dissertation explores novel absorption contrast mechanisms of PAT based on optical/thermal patterns, endogenous cellular chromophores, nanoparticles, small-molecule dyes and genetically-encoded proteins. With these novel contrasts, the proof-of-concept applications of PAT have been extended to include homogenous flow measurements, targeted angiogenesis imaging and therapy, label-free white blood cell imaging, 3D-whole-organ …


Stability And Redispersion Of Platinum Nanoparticle Suspensions For Attachment To Dyes In Low-Cost Solar Cells, Jeffrey Rothstein Dec 2016

Stability And Redispersion Of Platinum Nanoparticle Suspensions For Attachment To Dyes In Low-Cost Solar Cells, Jeffrey Rothstein

Honors Scholar Theses

The project involves optimizing the synthesis, washing, and redispersion of platinum nanoparticles. The nanoparticles are to be attached to dye molecules where they will act as nanocatalysts to reduce energy losses in low-cost dye-sensitized solar cells. The goal is to develop a process based on a pure or mixed solvent that will maintain a stable dispersion of the nanoparticles without interfering with their ability to bond with the dye molecules in the solar cell.


Soot Oxidation By Oh: Theory Development, Model, And Experimental Validation, Hossein Ghiassi, David Lignell, Joann S. Lighty Dec 2016

Soot Oxidation By Oh: Theory Development, Model, And Experimental Validation, Hossein Ghiassi, David Lignell, Joann S. Lighty

Faculty Publications

Soot oxidation by OH has been represented by an equation developed by Neoh that includes the efficiency of OH radicals to react, the collision efficiency. The focus of this study is the theoretical development of the collision efficiency, enabling a more accurate prediction of soot oxidation where OH is the principle oxidizer. In addition to the traditional parameters, such as OH concentration and temperature, this approach aims to improve the prediction of soot oxidation by considering the fraction of the active area as well as the size of the soot particle and aggregate. The fraction of the active area was …


Mechanism Of Interaction Of Peptide Modified Nanoparticles With Porphyromonas Gingivalis., Ankita Jain Dec 2016

Mechanism Of Interaction Of Peptide Modified Nanoparticles With Porphyromonas Gingivalis., Ankita Jain

Electronic Theses and Dissertations

Studies suggest that P. gingivalis functions as a keystone pathogen and interacts with primary colonizers in the supragingival biofilm such as S. gordonii. This interaction contributes to the initial colonization of the oral cavity by P. gingivalis and thus represents a potential target for therapeutic intervention. We have identified a peptide (BAR) derived from the streptococcal SspB protein that functions to inhibit P. gingivalis adherence to S. gordonii. In addition, we showed that nanoparticles (NPs) functionalized with BAR inhibit this interaction more potently than free soluble peptide, possibly by promoting interaction with P. gingivalis at higher valency than …


Coarse-Grained Simulations Of The Self-Assembly Of Dna-Linked Gold Nanoparticle Building Blocks, Charles Wrightsman Armistead Dec 2016

Coarse-Grained Simulations Of The Self-Assembly Of Dna-Linked Gold Nanoparticle Building Blocks, Charles Wrightsman Armistead

Graduate Theses and Dissertations

The self-assembly of nanoparticles (NPs) of varying shape, size, and composition for the purpose of constructing useful nanoassemblies with tailored properties remains challenging. Although progress has been made to design anisotropic building blocks that exhibit the required control for the precise placement of various NPs within a defined arrangement, there still exists obstacles in the technology to maximize the programmability in the self-assembly of NP building blocks. Currently, the self-assembly of nanostructures involves much experimental trial and error. Computational modeling is a possible approach that could be utilized to facilitate the purposeful design of the self-assembly of NP building blocks …


Electrochemical Fabrication Of Energetic Thin Films, Jonathan J. Coleman Nov 2016

Electrochemical Fabrication Of Energetic Thin Films, Jonathan J. Coleman

Chemical and Biological Engineering ETDs

Current thermal battery heat sources suffer from slow reaction propagation rates and require extreme care when handling to protect from inadvertent ignition sources. Nanostructured intermetallic heat sources are strong candidates for improved heat sources as they have high enthalpy of reaction, are highly conductive before and after firing and are completely gasless reactions. Current fabrication methods of these heat sources rely on a PVD multistep layering process that is time and capital intensive, and cost prohibiting to their use. The composition and nanostructuring these films require can be provided with electrochemical codeposition, where the two components (aluminum and nickel) are …


Fabrication Of Nano Patterned Arrays And Optical Applications, Aktaruzzaman Al-Hossain Sep 2016

Fabrication Of Nano Patterned Arrays And Optical Applications, Aktaruzzaman Al-Hossain

Student Theses and Dissertations

Most of the researches in developing arrayed patterns have utilized the lithography process with pre-patterned structures. However, lithography itself is considerably low efficient in terms of cost and time, especially by the chemical etching process. Furthermore, the chemical etching process is also a potential barrier in three dimensional structures with multi-layered patterns. The limitation of substrate and mask size is also disadvantageous to the larger area in real-time fabrication process. In this study, a new approach using the solid thin-film dewetting process with intense pulsed light annealing and optical study towards wavelength transformation is introduced to overcome the addressed problems. …


Effect Of Aggregation And Particle Size On The Thermal Conductivity Of Nickel-Epoxy Nanocomposites, Jacob M. Faulkner, Xiangyu Li, Xiulin Ruan Dr. Aug 2016

Effect Of Aggregation And Particle Size On The Thermal Conductivity Of Nickel-Epoxy Nanocomposites, Jacob M. Faulkner, Xiangyu Li, Xiulin Ruan Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microprocessor advancements have been stunted in recent years by inadequate means of heat dissipation as power continues to grow and size continues to shrink. One way to increase thermal conductivity while maintaining electrical insulation is to add metal nanoparticles to a polymer matrix. This cheap material has become a popular thermal interface for this reason. However, optimization of the interface is dependent upon a number of factors including particle size, shape, orientation, and aggregation. Various theoretical models and numerical approximations have been developed to find the effective thermal conductivity of such nanocomposites, but none has been able to fully incorporate …


Assembly Of Nucleic Acid-Based Nanoparticles By Gas-Liquid Segmented Flow Microfluidics, Matthew L. Capek, Ross Verheul, David H. Thompson Aug 2016

Assembly Of Nucleic Acid-Based Nanoparticles By Gas-Liquid Segmented Flow Microfluidics, Matthew L. Capek, Ross Verheul, David H. Thompson

The Summer Undergraduate Research Fellowship (SURF) Symposium

The development of novel and efficient mixing methods is important for optimizing the efficiency of many biological and chemical processes. Tuning the physical and performance properties of nucleic acid-based nanoparticles is one such example known to be strongly affected by mixing efficiency. The characteristics of DNA nanoparticles (such as size, polydispersity, ζ-potential, and gel shift) are important to ensure their therapeutic potency, and new methods to optimize these characteristics are of significant importance to achieve the highest efficacy. In the present study, a simple segmented flow microfluidics system has been developed to augment mixing of pDNA/bPEI nanoparticles. This DNA and …


Sensing Gyroscopic Properties Of Rotating Magnetic Nanoparticles In Solution, Brian Gerald Krug Jun 2016

Sensing Gyroscopic Properties Of Rotating Magnetic Nanoparticles In Solution, Brian Gerald Krug

Dissertations

A new sensor using magnetic nanoparticles and rotating magnetic fields has been developed. By spinning the nanoparticles in a rotating magnetic field, it is feasible to infer angular position and inertia if an external force is applied to the system. The nanoparticles are treated as a multitude of miniature gyroscopes whose overall effect can be combined as one single gyroscope. Two sensors were built to test the feasibility, both containing Fe3O4 nanoparticles.

The typical input current was 250 milliamps. When the sensor deviated from its magnetic axis by a small angle, the input current changed between 1 and 2 milliamps …


Life Cycle Assessment And Comparison Of Magnesium Oxide Nanoparticles Prepared By Aqueous And Microwave Synthesis Methods, Jesse Cartland Jun 2016

Life Cycle Assessment And Comparison Of Magnesium Oxide Nanoparticles Prepared By Aqueous And Microwave Synthesis Methods, Jesse Cartland

Materials Engineering

Abstract: Magnesium oxide nanoparticles are being used increasingly as catalysts for organic synthesis, fuel oil additives, and CO2 adsorbents. There are many ways to produce magnesium oxide nanoparticles, but there is little information available regarding the environmental costs of production. As demand for environmentally friendly materials increases, it is important to understand environmental impact differences between various production methods. This study will compare the differences in embodied energy and global warming potential (GWP) between two synthesis methods: microwave combustion synthesis (microwave synthesis) and oxidation of magnesium hydroxide (aqueous synthesis). The resulting nanoparticles were characterized using scanning electron microscopy (SEM), …


Graphene Quantum Dots-Based Drug Delivery For Ovarian Cancer Therapy, Yiru Qin May 2016

Graphene Quantum Dots-Based Drug Delivery For Ovarian Cancer Therapy, Yiru Qin

USF Tampa Graduate Theses and Dissertations

Ovarian cancer, one of the most dreadful malignancies of the female reproductive system, poses a lethal threat to women worldwide. In this dissertation, the objective was to introduce a novel type of graphene quantum dots (GQDs) based nano-sized drug delivery systems (DDS) for ovarian cancer treatment. As a starting point, the facile synthesis method of the GQDs was established. Subsequently, the targeting ligand,folic acid (FA), was conjugated to GQDs. Next, a FDA approved chemotherapeutic drug, Doxorubicin (DOX), was loaded to form the GQDs-FA-DOX nano-conjugation as the DDS. Moreover, the uptake profile and anti-cancer effect of the GQDs-FA-DOX were validated in …


Recent Progresses In Molybdenum-Based Electrocatalysts For The Hydrogen Evolution Reaction, Ze-Xing Wu, Jie Wang, Jun-Po Guo, Jing Zhu, De-Li Wang Apr 2016

Recent Progresses In Molybdenum-Based Electrocatalysts For The Hydrogen Evolution Reaction, Ze-Xing Wu, Jie Wang, Jun-Po Guo, Jing Zhu, De-Li Wang

Journal of Electrochemistry

Electrochemical catalytic production of hydrogen has been considered as a promising and sustainable strategy for clean and renewable energy technologies. Molybdenum-based non noble metal catalysts for the hydrogen evolution reaction have attracted extensive attention due to its effective catalytic performance. In this review, the recent progresses in molybdenum-carbide, phosphide, nitride and sulfide electrocatalysts are presented. In addition, the strategies to improve the catalytic performance are analyzed and the prospects for the future development trends are expected.


Heating Element Including Carbon Nanotube (Cnt) Layer, Santhosh Kumar Loganathan, Virginie Rollin, Daewon Kim Apr 2016

Heating Element Including Carbon Nanotube (Cnt) Layer, Santhosh Kumar Loganathan, Virginie Rollin, Daewon Kim

Publications

Apparatus , materials , and techniques and techniques herein can include providing a deposited layer comprising a com posite material including carbon nanotubes ( CNTs ) . Accord ing to various examples , the composite can be applied to a substrate such as using a solution containing CNTs and other constituents such as sulfur . The solution can be spray applied to a substrate , or spin - coated upon a substrate , such as to provide a uniform , conductive , and optically - transpar ent film layer . In one application , such a film layer can be …


Dlvo Approximation Methods For Predicting The Attachment Of Silver Nanoparticles To Ceramic Membranes, Anne M. Mikelonis, Sungmin Youn, Desmond F. Lawler Jan 2016

Dlvo Approximation Methods For Predicting The Attachment Of Silver Nanoparticles To Ceramic Membranes, Anne M. Mikelonis, Sungmin Youn, Desmond F. Lawler

All Engineering Faculty Research

This article examines the influence of three common stabilizing agents (citrate, poly(vinylpyrrolidone) (PVP), and branched poly(ethylenimine) (BPEI)) on the attachment affinity of silver nanoparticles to ceramic water filters. Citrate-stabilized silver nanoparticles were found to have the highest attachment affinity (under conditions in which the surface potential was of opposite sign to the filter). This work demonstrates that the interaction between the electrical double layers plays a critical role in the attachment of nanoparticles to flat surfaces and, in particular, that predictions of double-layer interactions are sensitive to boundary condition assumptions (constant charge vs constant potential). The experimental deposition results can …


Engineering Gold Nanoparticles And Their Use To Control Nucleation, Pedram Jahanian Jan 2016

Engineering Gold Nanoparticles And Their Use To Control Nucleation, Pedram Jahanian

Wayne State University Dissertations

This study focuses on fabrication of hybrid nanostructures using gold nanoparticles (AuNP) as seeds and partially oxidized potassium tetracyanoplatinate, known as Krogmann’s salt (KCP), and later this method will be employed to manufacture a prototype sensor for detecting different vapors. Nanocrystals are synthesized using electrochemical method with the aim to have more control over the size and shape of the charge transfer salt based on the seed mediated nucleation method. AuNP seeds are prepared on highly ordered pyrolytic graphite (HOPG) substrate by the electrocrystallization method. An aqueous solution of 0.05 to 1 mM Hydrogen tetrachloroaurate (HAuCl4) with 0.1 mM (Potassium …


Synthesis And Characterization Of Curcumin Polymer For Application In Radiation Induced Lung Damage, Mark C. Bailey Jan 2016

Synthesis And Characterization Of Curcumin Polymer For Application In Radiation Induced Lung Damage, Mark C. Bailey

Theses and Dissertations--Chemical and Materials Engineering

Radiotherapy is used as a primary treatment for many cancers, including lung cancer. Although radiotherapy has proven to be an effective cancer treatment, its use is heavily limited due to the peripheral toxicity to healthy tissue. In this work, the antioxidant, curcumin, was tested as a radioprotectant to reduce radiation damage to healthy cells. Curcumin has been limited in use due to its poor bioavailability. In order to avoid problems associated with free curcumin delivery, curcumin poly(beta-amino ester) (CPBAE) was synthesized.

The first study investigated the in vitro radioprotection effect of curcumin in HUVEC dosed with gamma radiation. Cells treated …


Improving Nano-Drug Delivery By Using Near-Real Time Sensing And Feedback, Pratik Adhikari Jan 2016

Improving Nano-Drug Delivery By Using Near-Real Time Sensing And Feedback, Pratik Adhikari

Doctoral Dissertations

Personalized medicine, seen as the solution to address the variability among the individuals, is the movement which proposes customization of medical procedures based on the need of the patient during the stages of prevention, diagnosis, treatment, and follow up. As the technology in medicine expands and newer methods of diagnosis and treatment are introduced in the clinic, real time data from the procedures is critical to assess the performance at point of care. Real time feedback, through collection of data at point of care would help make informed clinical decisions, potentially improving the efficacy of the treatment. In this dissertation, …


Investigating The Size Dependent Material Properties Of Nanoceria, Bushra B. Alam Jan 2016

Investigating The Size Dependent Material Properties Of Nanoceria, Bushra B. Alam

Legacy Theses & Dissertations (2009 - 2024)

Nanoceria is widely being investigated for applications as support materials for fuel cell catalysts, free radical scavengers, and as chemical and mechanical abrasives due to its high antioxidant capacity and its oxygen buffering capacity. This antioxidant or oxygen buffering capacity has been reported to be highly size dependent and related to its redox properties. However, the quantification of this antioxidant capacity has not been well defined or understood and has been often been carried out using colorimetric assays which do not directly correlate to ceria nanoparticle properties. Fabrication rules for developing materials with optimal antioxidant/oxygen buffering capacities are not yet …


Investigation Of The Optical And Sensing Characteristics Of Nanoparticle Arrays For High Temperature Applications, Gnanaprakash Dharmalingam Jan 2016

Investigation Of The Optical And Sensing Characteristics Of Nanoparticle Arrays For High Temperature Applications, Gnanaprakash Dharmalingam

Legacy Theses & Dissertations (2009 - 2024)

The monitoring of polluting gases such as CO and NOx emitted from gas turbines in power plants and aircraft is important in order to both reduce the effects of such gases on the environment as well as to optimize the performance of the respective power system. The need for emissions monitoring systems is further realized from increased regulatory requirements that are being instituted as a result of the environmental impact from increased air travel. Specifically, it is estimated that the contributions from aircraft emissions to total NOx emissions will increase from 4% to 17% between 2008 and 2020. Extensive fuel …


Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan Jan 2016

Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan

Masters Theses

"Single particle (SP)-ICP-MS methods were developed to characterize and quantify Ti-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. Six-gang stirrers were used to simulate drinking water treatments including lime softening, alum coagulation, powdered activated carbon sorption, filtration, and disinfection by free chlorine. Lime softening effectively removed most nanoparticles added. Source and drinking waters from three large …


Bioresponsive Polymer Coating On Nanoparticles, Tunyaboon Laemthong Jan 2016

Bioresponsive Polymer Coating On Nanoparticles, Tunyaboon Laemthong

Masters Theses

"Nanotechnology incorporated with molecular biology became a promising way to treat cancer. The size of nanoparticles enables them to overcome the side effects noticed in cancer treatment like chemotherapy and surgery. Various types and shapes of nanoparticles have been synthesized and used in drug delivery to tumor sites. However, one of problems of using these nanoparticles is the aggregation after injecting them into human body due to flow rate of bloodstream. The coagulation and aggregation will result in clogging blood vessel and lower therapeutic efficacy.

In this thesis, a solution to the aggregation problem was proposed, which is coating biopolymer …


Ultrahigh Field Magnetic Resonance Imaging – Technical Development And Translational Applications, Judy Alper Jan 2016

Ultrahigh Field Magnetic Resonance Imaging – Technical Development And Translational Applications, Judy Alper

Dissertations and Theses

Magnetic resonance imaging (MRI) may be used to provide detailed images of the human body with excellent soft tissue contrast. Alongside its current widespread clinical applications for diagnosis and treatment, MRI allows researchers to measure structure and function of different tissue types in order to advance our understanding of human biology and enable new medical applications of MRI. In particular, diseases affecting nerves and vessels, such as trigeminal neuralgia, with uncertain etiology can be studied using multiple MRI modalities so that treatment planning can we more effective and patient outcomes can be improved. Ultrahigh field MRI scanners, such as those …


Intracellular Ros Mediates Gas Plasma-Facilitated Cellular Transfection In 2d And 3d Cultures, Dehui Xu, Biqing Wang, Yujing Xu, Zeyu Chen, Qinjie Cui, Yanjie Yang, Hailan Chen, Michael G. Kong Jan 2016

Intracellular Ros Mediates Gas Plasma-Facilitated Cellular Transfection In 2d And 3d Cultures, Dehui Xu, Biqing Wang, Yujing Xu, Zeyu Chen, Qinjie Cui, Yanjie Yang, Hailan Chen, Michael G. Kong

Bioelectrics Publications

This study reports the potential of cold atmospheric plasma (CAP) as a versatile tool for delivering oligonucleotides into mammalian cells. Compared to lipofection and electroporation methods, plasma transfection showed a better uptake efficiency and less cell death in the transfection of oligonucleotides. We demonstrated that the level of extracellular aqueous reactive oxygen species (ROS) produced by gas plasma is correlated with the uptake efficiency and that this is achieved through an increase of intracellular ROS levels and the resulting increase in cell membrane permeability. This finding was supported by the use of ROS scavengers, which reduced CAP-based uptake efficiency. In …