Engineering Commons^™

Second Baptist Church, Cypress Campus, David Kalinec

Fire Protection Engineering: Culminating Experience Project Reports

This report was created as part of the Master of Science Fire Protection Engineering degree program at California Polytechnic State University at San Luis Obispo. This project summarized the covered subjects during the course of each quarter of the program. The site chosen for this project is Second Baptist Church, Cypress Campus, located in Cypress, TX. This building was chosen because Churches are mixed use buildings that include assembly occupancies and large occupant loads.

A prescriptive-based code evaluation was performed on the building according to the 2012 editions of the international building code and fire code, adopted at the time …

Integrated Resource Plan For Portland General Electric (Pge), Mary Biswal, Alejandro Castelan

Master's Projects and Capstones

An integrated resource plan (IRP) for Portland General Electric (PGE) is developed in this master’s project. The IRP is based on capacity expansion modeling for zero-carbon emission scenarios. PGE is a public electric utility based in Oregon and serves around 887,000 customers across a territory of 4,000 sq. miles. The utility’s resource mix is currently heavily dependent on natural gas making up almost 50% of its capacity. While the state renewable portfolio standards (RPS) require Oregon power utilities to derive 50% of their generation from renewable sources by 2040, PGE plans to move rapidly into a clean energy mix by …

Modeling Analysis And Prediction On Ncp Epidemic Transmission, Huaxiong Sheng, Wu Lin, Changliang Xiao

Journal of System Simulation

Abstract: The modeling analysis on the NCP (Novel Coronavirus Pneumonia) epidemic transmission before and after the closure of Wuhan is presented. On the basis of preprocessing the epidemic data, the classical SIR model and differential recurrence method are used to analyze and forecast the epidemic situation in the stage of control. The theoretical value and measured value fits well. In the stage of free transmission, the logistic model is used to compare and analyze the epidemic data five days in advance or later with the actual data to show the importance of taking the epidemic prevention measures in time. The …

From Branches To Fibers - Investigating F-Actin Networks With Biochemistry And Mathematical Modeling, Melissa A. Riddle

Senior Honors Projects, 2020-current

F-actin networks have different structures throughout the cell depending on their location or mechanical role. For example, at the leading edge of a migrating cell, F-actin is organized in a region called the lamellipodia as a branched network responsible for pushing the membrane outwards. Behind the lamellipodia is a lamellar actin network where focal adhesions and stress fibers originate, and then within the cell cortex, actin is arranged in a gel-like network. Stress fibers are an important organization of F-actin and how they arise from either the branched lamellipodia network or the gel-like cortex network is poorly understood. Our approach …

Multiscale Modeling And Simulation Of Clutter In Isar Imaging, Jon Mitchell

Electrical Engineering Dissertations - Archive

Clutter is common in applications of radar imaging and can adversely impact target imaging by contributing scattered energy that is not accounted for in target signal models. One potential source of clutter is moving foliage in the vicinity of the target, such as a target embedded in a forest. ISAR imaging of moving clutter results in an equivalent current image that changes over each imaging sample. The stochastic nature of this clutter equivalent current presents challenges in detecting and imaging a weak embedded target using traditional algorithms. This dissertation proposes a multiscale model and analysis method to characterize the multiscale …

Construction-Ready Digital Terrain Models, Rachel Catchings, Steven Waddle, Hala Nassereddine, Gabriel B. Dadi, Makram Bou Hatoum, Walter Johnson

Kentucky Transportation Center Research Report

Since 2009, Kentucky has made its 3D design data available as a supplemental reference to bidders through the project delivery process. This research discusses methods for ensuring electronic engineering data (EED) — and specifically the proposed digital terrain model (DTM) — support modern construction management methods at the Kentucky Transportation Cabinet (KYTC). Researchers performed a literature review, surveyed KYTC construction and design staff, engaged with Cabinet staff and industry members to understand the current state of practice, and evaluated quality- related attributes of the EED through case studies. The report presents a set of targeted recommendations for improving KYTC processes …

Empirical Modeling Of Structural Distortions In Perovskite Ceramics, Evan Connor Smith

Boise State University Theses and Dissertations

Predictive models for composition-structure-property relationships are essential to realizing the full potential of electroceramic materials; however, the electroceramics industry has largely failed to invest in predictive models in favor of simple rules of thumb or expensive, time-consuming trial-and-error methods. Empirically derived predictive models have the potential to significantly improve and guide future research in a more cost-effective and timely manner. It may even be possible to predict some intrinsic properties (e.g., polarization) on the order of a unit cell using only the charge and size of each chemical component. Scientists and researchers may ultimately be able to use …

Validation Risk Across Hierarchical Models, John B. Young

Computational Modeling & Simulation Engineering Theses & Dissertations

Modeling and simulation are applied in a great many methods across a variety of topics. Model developers and users alike have a professional duty to understand the complexities of the tools and methods they are used. Oftentimes, models that have been independently constructed and executed are used to inform one another for an analytic purpose and the compatibility of the models is not always addressed. In the literature, great attention has been paid to model validation. When using models constructively with one another, analysts must understand the bounds of model validity and ensure that the combination of models does not …

Model Development To Assess Groundwater Flooding And Levee Underseepage In New Orleans, Louisiana, Shuo Yang

LSU Master's Theses

Flooding is a major threat to New Orleans due to its geographic location and geologic condition. However, potential groundwater flooding is seldom studied and poorly understood even though groundwater level is expected high in the city. High groundwater level might result in groundwater flooding in low-lying areas. High uplift pore water pressures may cause strong underseepage and risk levee safety. The objective of this study is to assess the impacts of hydrogeology on groundwater flooding and evaluate potential underseepage-induced hazards along levees in New Orleans. In this study, a groundwater flow model development which involves stratigraphy modeling, groundwater flow model …

Metalimnetic Oxygen Minimum In Green Lake, Wisconsin, Mahta Naziri Saeed

Dissertations, Master's Theses and Master's Reports

Green Lake, located in Green Lake County, Wisconsin, has been experiencing summer Metalimnetic Oxygen Minima (MOM). The severity of the MOM has increased in recent years and the lake was listed as impaired in 2014. To investigate the MOM, the lake was monitored during 2017 and 2018 at two sites using moored temperature and oxygen sensors recording at 1-hour intervals. Using these data, a hydrodynamic model (Simstrat) was configured for the lake. A new model was then developed to simulate the oxygen changes in the lake. Productivity, respiration, sediment oxygen demand (SOD) and fluxes were included, and hydrodynamics were driven …

Design Of A Novel Wearable Ultrasound Vest For Autonomous Monitoring Of The Heart Using Machine Learning, Garrett G. Goodman

Browse all Theses and Dissertations

As the population of older individuals increases worldwide, the number of people with cardiovascular issues and diseases is also increasing. The rate at which individuals in the United States of America and worldwide that succumb to Cardiovascular Disease (CVD) is rising as well. Approximately 2,303 Americans die to some form of CVD per day according to the American Heart Association. Furthermore, the Center for Disease Control and Prevention states that 647,000 Americans die yearly due to some form of CVD, which equates to one person every 37 seconds. Finally, the World Health Organization reports that the number one cause of …

Computational Methods For Creep Modeling, Ricardo Vega

Open Access Theses & Dissertations

Creep is an important phenomenon present in the power generation and aerospace industry. Creep is a mechanism that degrades the quality of a part, such as the turbines used in different industries, when elevated temperatures and loads are applied. Creep damage can cause critical failures that can cost millions of dollars and as such, prevention is important. A multitude of creep models exist to help with design and failure prevention. These models are applied using computational tools which allows the engineer to properly predict the life of a part or other material properties. In this work various creep numerical optimization …

Planar Motion Control Of A Cube Satellite Using Cold Gas Thrusters, Christian Lozoya

Open Access Theses & Dissertations

This Thesis presents a mathematical model developed for the computational simulation ofCubeSat movement using four thrusters that permit uniaxial translation and rotation. Arbitrary functions are fit to boundary conditions to simulate the force, acceleration, velocity, and displacement of the CubeSat along a plane. The model is used to derive a motion control algorithm assuming constant pressure and mass. A single model describes both translation and rotation. This Thesis also explores the relationship between propellant consumption and the time required to complete a displacement implied by the model.

Modeling The Effects Of Wastewater Infrastructure Options On Water Quality In Greater Cleveland, Ohio, Mike Foster

Dissertations, Master's Theses and Master's Reports

The city of Cleveland, OH, and the Northeast Ohio Regional Sewer District are in the process of an ambitious engineering project designed to reduce the amount of untreated wastewater that is discharged into Lake Erie and its tributaries. The project involves the construction of seven tunnels that will intercept combined sewer overflows for transport to wastewater treatment plants, along with upgrades to the treatment capacity of these plants. This report will examine the water quality impacts of this project, as well as the impact of six additional proposed management options, on the streams of Greater Cleveland and the Lake Erie …

Modeling The Influence Of Changes In Aliphatic Structure On Char Surface Area During Coal Pyrolysis, He Yang, Thomas H. Fletcher, Yang Li, Lijun Jin, Sufen Li, Yan Shang, Haoquan Hu

Faculty Publications

The influence of changes in aliphatic structure on char surface area during coal pyrolysis was modeled, and the effect was introduced to a previous char surface area model for lignite pyrolysis established based on the chemical percolation devolatilization (CPD) model. The modified model can predict not only the N2 and CO2 char surface area during rapid pyrolysis of three lignites but also the CO2 char surface area of two high-volatile bituminous coals; the agreement of the modified model with experiments is improved at high temperatures. The decrease in aliphatic chain length can reduce adsorption positions around aromatic core, and decrease …

Literature Review On Modeling Of Density Difference Pumping Strategy For Geothermal Applications, Lucas A. Ware

Graduate Theses, Dissertations, and Problem Reports (ETD)

The utilization of geothermal ground heat sources has been demonstrated at both large and small scales across the world. However, methods of extraction of the hot working fluids are often a source of energy inefficiency and high capital expense. Current techniques to extract geothermal fluids rely on mechanically and electrically driven down-hole components that require maintenance on a regular basis. In providing a solution, one approach that reduces complexity, decreases maintenance, and allows access to fluids at greater depth is an airlift approach. The airlift approach relies on injection of gas at a depth within a geothermal well to lift …

Modeling Of Rotary Packed Beds For Reactive And Non-Reactive Systems, Chinyere Evangeline Ezeobinwune

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rotary packed beds (RPBs) are used in a wide range of reactive and non-reactive applications. In this research, a 2-d, first-principles, dynamic model of a non-reactive RPB that is used for heat exchange between the outgoing flue gas from a power plant and the incoming air to the boiler/pulverizer of the power plant is developed. A 2-d, first-principles model of a reactive RPB is developed where a functionalized metal-organic framework (MOF) is used for CO₂ capture.

For the non-reactive system, a Ljungstrom-type air preheater (APH) is considered. Existing models for these rotating heat exchangers are typically 1-d. There are …

Modeling And Tuning Of Cvt Systems For Sae® Baja Vehicles, Sean Sebastian Skinner

Graduate Theses, Dissertations, and Problem Reports (ETD)

Continuously variable transmission (CVT) describes a family of transmission styles. These systems serve the same purpose as their traditional counterparts; transmitting power while offering a variable gearing ratio. The difference lies in the CVT’s ability to change ratio continuously between a minimum and maximum without halting power transfer. They offer many benefits of an automatic transmission while being significantly lighter. For this reason, CVTs are often used on Baja SAE^® vehicles to control gearing ratio.

WVU’s Baja team has used mechanical CVTs for many decades. These systems are simpler in the sense that they don’t require power to operate. …

Micro-Macro Mathematical Modeling Analysis Of An Al-Air Battery, Christopher Charles Welch

Graduate Research Theses & Dissertations

The aluminum-air battery is a very promising electrical energy storage system for portable electronics and electric vehicles because it is safe, inexpensive, and has a very high energy density. With the [EMIm]Cl-AlCl3 room-temperature ionic liquid (RTIL) electrolyte, by controlling the acidity, H2 evolution and dendrite formation are prevented and the Al2O3 passive film on the anode can be partially dissolved (cracked), so the battery’s lifespan is extended and even allows battery charging. Still, the Al2O3 passive film on the anode and Al2O3 deposition on the cathode remain issues which negatively affect battery performance. While these phenomena have been experimentally observed, …

Development Of A Modeling Algorithm To Predict Lean Implementation Success, Richard Charles Barclay

Doctoral Dissertations

”Lean has become a common term and goal in organizations throughout the world. The approach of eliminating waste and continuous improvement may seem simple on the surface but can be more complex when it comes to implementation. Some firms implement lean with great success, getting complete organizational buy-in and realizing the efficiencies foundational to lean. Other organizations struggle to implement lean. Never able to get the buy-in or traction needed to really institute the sort of cultural change that is often needed to implement change. It would be beneficial to have a tool that organizations could use to assess their …

Modeling A Nuclear Research Reactor And Radiation Dose Estimation In An Accident Scenario, Abdulaleem Abdulmajeed Bugis

Doctoral Dissertations

“A detailed, flexible three-dimensional (3D) model of the Missouri S&T Reactor (MSTR) with a heterogeneous core geometry was developed using the Standardized Computer Analyses for Licensing Evaluation (SCALE). A Graphical User Interface (GUI) was developed for SCALE, which allows the user to generate an input file automatically. The SCALE model was validated with a Monte Carlo N-Particle Transport (MCNP) model of the MSTR. The validation process was based on the criticality calculations using the Criticality Safety Analysis Sequence (CSAS6). Three geometrical models were examined. The SCALE model that has the full detailed geometry showed a good agreement with the MCNP …

Detailed Modeling Of A Thermoelectric Generator For Maximum Power Point Tracking, Hayati̇ Mamur, Yusuf Çoban

Turkish Journal of Electrical Engineering and Computer Sciences

Thermoelectric generators (TEGs) are used in small power applications to generate electrical energy from waste heats. Maximum power is obtained when the connected load to the ends of TEGs matches their internal resistance. However, impedance matching cannot always be ensured. Therefore, TEGs operate at lower efficiency. For this reason, maximum power point tracking (MPPT) algorithms are utilized. In this study, both TEGs and a boost converter with MPPT were modeled together. Detailed modeling, simulation, and verification of TEGs depending on the Seebeck coefficient, the hot/cold side temperatures, and the number of modules in MATLAB/Simulink were carried out. In addition, a …

Upstream Water Flow At Kotri Barrage, Sindh Pakistan, Rakhshinda Bano, Mehdi Khiadani, Steven Burian

Research Datasets

The dataset contains the water flow data at Kotri barrage, Sindh Pakistan

Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua

Journal of System Simulation

Abstract: In order to solve the high temperature problem caused by the high speed of the synergistic aspirating engine, this paper designs a control algorithm for the heat exchanger. In the process of designing the control algorithm, considering the strong nonlinearity, uncertainty and strong coupling of the engine, The decoupling study of the multi-input and multi-output linear model of the heat exchanger is carried out. The decoupling effect of two different decoupling methods on the strongly coupled heat exchanger is obtained. The fuzzy decoupling PID controller has short adjustment time and overshoot. Small, conclusions with better decoupling effects.

Research On Cost-Effectiveness Analysis And Modeling Of Equipment, Yueqiang Zhao, An Shi, Mai Qiang, Yinyin Lin

Journal of System Simulation

Abstract: There are many methods to study the cost effectiveness analysis of equipment. It is very important to choose the right method and method combination . On this basis of analyzing and sorting out the research status at home and abroad, the collation and comparative study of cost estimation methods and modeling methods are carried out.The methods and classifications of effectiveness evaluation and calculating and aggregating efficiency indicators are sorted out. The methods suitable for cost-effectiveness analysis and decision-making are summarized. The characteristics of these methods in the analysis of equipment system and their applicability to engineering application are pointed …

A Comparison Of The Army Corps Of Engineers Hydrologic Modeling System And Autodesk Storm And Sanitary Analysis For Hydraulic And Hydrologic Analysis And Design, Foster Josef Heifetz Campbell

Master's Theses

Hydrological and hydraulic effects of urban development is one of the key issues of study for improved water management. The addition of impervious surfaces to once pervious land and re-routing open channels and flow paths can cause flooding or declining water levels within a watershed. Many studies of these issues have found that there can be multiple factors causing hydrological and hydraulic impacts, and it can be hard to analyze and develop effective solutions without appropriate drainage software packages. However, there are multiple software packages available for use, and determining the correct one to use for a specific challenge can …

Hvac System Energy Audit For Leverett Elementary School, Connor Smalling

Biological and Agricultural Engineering Undergraduate Honors Theses

Leverett Elementary School is located in Fayetteville, AR. The school needs significant upgrades to its infrastructure. The Fayetteville Public School District has voted to pursue an Energy Services Performance Contract (ESPC) in order to finance the desired upgrades to Leverett Elementary, among other schools in the district.

The scope of this thesis was to perform an energy audit on the existing heating, ventilation, and air conditioning (HVAC) system. By using an energy modeling software, eQuest, the building and the existing base system were modeled to determine utility consumption. Three different HVAC system alternatives were analyzed against the base system by …

Modeling And Simulation Of Missile Trajectory Based On Practical Sampling, Wu Shuai, Xiaohua Zhou, Lili Wang, Xingzhong Yao

Journal of System Simulation

Abstract: Aiming at the problem of lacking the proper simulation method for missile trajectory in combat simulation training, this paper analyzes the limitations of the 6D and 3D simulation models, proposes a method of trajectory simulation with missile kinematics model and history measured data, and taking an air-to-surface ballistic missile with midcourse-terminal guidance as an example, describes the model construction process in detail. Through the verification, validation and simulation experiments, it shows that this method can simulate various types of missile trajectory with high confidence on both sides of “red and blue”, which has an important reference meaning for missile …

The Method Of Calculating The Middle Simple Locomotive And The Train Composition In The Turnover Point Based On The Modeling In The Conditions Of A Pair Traffic Of Trains, M.N. Masharipov

Journal of Tashkent Institute of Railway Engineers

The article developed a method for calculating the average downtime of a locomotive and the composition of a train at a turnaround point based on modeling in a pair train schedule. As a result of this, it is scientifically substantiated that strict adherence to the principle “trains do not expect a locomotive” will lead to a significant increase in the cost of locomotive hours at the point of turnover

Design And Modeling Of A New Biomimetic Soft Robotic Jellyfish Using Ipmc-Based Electroactive Polymers, Zakai J. Olsen, Kwang J. Kim

Mechanical Engineering Faculty Research

Smart materials and soft robotics have been seen to be particularly well-suited for developing biomimetic devices and are active fields of research. In this study, the design and modeling of a new biomimetic soft robot is described. Initial work was made in the modeling of a biomimetic robot based on the locomotion and kinematics of jellyfish. Modifications were made to the governing equations for jellyfish locomotion that accounted for geometric differences between biology and the robotic design. In particular, the capability of the model to account for the mass and geometry of the robot design has been added for better …