Engineering Commons^™

Retention Of Female Faculty Members, Susan L. Murray, Mariesa Crow, Suzanna M. Rose

Engineering Management and Systems Engineering Faculty Research & Creative Works

The recruitment and the retention of female undergraduate and graduate students into engineering courses is discussed. A similar challenge lies in recruiting female faculty member from the limited pool of candidates in several fields at most universities. It is found that about half the females who were hired did not stay at the university. It is suggested that programs should be introduced to encourage mentoring and career development as such improvements would benefit all faculty members both female and male.

The Role Of Mechanical Design In Mechatronics Education, John Gardner

Mechanical and Biomedical Engineering Faculty Publications and Presentations

A survey of Mechatronics course offerings around the United States shows a rich variety of approaches to this topic.[1] Indeed, it appears that a majority of Mechanical Engineering programs across the county offer some formal offering in this area and it seems clear that the vast majority of Mechatronics courses are offered through Mechanical Engineering departments. With the traditional emphasis on design skill in mechanical engineering, it would seem obvious that mechatronics courses would feature a major design component. Surprisingly, very few existing mechatronics courses (at least those reported in the literature) feature a strong emphasis on mechanical design. That …

A Study Of Financial Analysis Expectations And Practices In The Engineering Management Workplace, Paul Kauffmann, Resit Unal, Andres Sousa-Poza, William Peterson

Engineering Management & Systems Engineering Faculty Publications

This paper describes an on-going study of Master of Engineering Management (MEM) students and the financial analysis related job expectations and environment they face. The objective of this effort is to provide enhanced understanding of these requirements so that instructional content in the related courses can be focused to meet these needs. To achieve this goal, the study segments findings based on a range of organizational and job level characteristics to identify critical differences in the financial work environment and the financial tools that are employed. Preliminary findings are discussed in this paper and contrasts between public and private sector …

Global Engineering In An Interconnected World: An Upper Division General Education Cluster At Old Dominion University, Sushil Chaturvedi, Gary Crossman, William Swart, Joseph Betit

Mechanical & Aerospace Engineering Faculty Publications

The “Global Engineering in an Interconnected World” cluster of courses fosters among students an awareness and understanding of global technology, quality assurance standards, and differences in cultural, communication, and business practices and their impact on a global work environment. This cluster will prepare the growing numbers of students who will accept employment with global firms or find themselves part of a merger or strategic alliance involving multinational corporations. This newly approved cluster of five courses described in the paper has been approved by the University for satisfying University upper-division general education requirements. As a consequence, students choosing this route to …

Prototype Development For A Leak-Preventive Toilet Flush System- An Met Senior Design (Capstone) Project, Cheng Y. Lin

Engineering Technology Faculty Publications

A senior design (Capstone) project for three mechanical engineering technology students at Old Dominion University is described. A prototype design is presented to perform the functional test of a leak-preventive toilet system. There are two major leaks in the toilet water tank. In the first case, leaking occurs when the seal in the water tank becomes aged. The leak is very easy to detect visually, since the outside of the tank and the floor becomes wet. In the second case, leak occurs when the flapper valve can't complete shut off the water, due to corrosion or damage of the rubber …

Cheating: Student Attitudes And Practical Approachs To Dealing With It, Trevor S. Harding

Materials Engineering

The preliminary results of educational research conducted at Kettering University is described in which students in an introductory engineering materials course (MFGE-370) were asked to complete a survey on their perceptions of cheating. The overall objective of the research was to determine those things students believed constituted cheating, the frequency to which they cheat and their attitudes about what steps could be taken to curtail cheating within a course. Practical approaches to effectively dealing with cheating are also discussed including using learning objectives for writing fair tests, promoting group work through cooperative learning teams, holding review sessions before tests and …

Selection Of Curricular Topics Using Extensions Of Quality Function Deployment, Paul Kauffmann, Abel Fernandez, Charles Keating, Derya Jacobs, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

Decision science can be an effective tool for enhancing organizational participation during strategic and complex decision making. This involvement develops a group consensus for relating organizational goals and the methods to achieve them. This paper describes an application of Quality Function Deployment (QFD) to define curricular topics that meet program objectives. Based on the ability of QFD to establish relationships, the model identifies the most important topics and quantifies their impact on meeting program goals. The model was developed to support restructuring of a Masters of Engineering Management degree program. The model supported decisions in selecting and prioritizing the required …

The Effectiveness Of An On-Line Graduate Engineering Management Course, Rosemarie Maffei Evans, Madison Daily, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the summer of 1997, the Engineering Management Department of the University of Missouri-Rolla's (UMR) began offering its first Internet-based graduate level course. This course, Advanced Production Management, was designed to utilize a combination of Internet-based tools, such as EMail and Chat rooms to create a alternative means for the delivery of course material. This paper will draw these following conclusions from more than a year of research, which included over 100 students in six different course offerings. First, the Internet-based students performed equally as well as the control group students. Second, students tend to have exaggerated time requirement expectations …

A Qfd Decision Model For Selecting Service, Teaching, And Research Opportunities, Paul Kauffmann, Abel Fernandez, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

New faculty are confronted with a barrage of information reiterating the importance of performance in the "big three" areas: teaching, service, and research / publications. From the provost to the department head, an untenured faculty member faces strong and sometimes conflicting pressures to become involved in activities ranging from committee assignments to participation in department or university research programs. Often these opportunities come with little guidance, advice, or obvious linkage to long term success in the three pillar areas and ultimately tenure. New faculty are confronted with a complex decision problem for which there is unstructured information available to develop …

Values And Reward Preferences Of Prospective Engineers, S Bhargava

IIMB Management Review

A study conducted among students of a leading Indian institute of engineering and technology yielded useful and significant insights into the preferred rewards and motivators, personal values and background, attitudes and job prospects of prospective engineers, considered to be the cream of Indian youth and likely to assume positions of leadership in the fields of engineering and management. The findings of the study could help solve prevalent problems in designing organisational structures and reward systems and in improving the quality of engineering education and prospects for engineers in Indian organisations.

Effectiveness Of An On-Line Graduate Engineering Management Course: A Preliminary Study, Rosemarie Maffei Evans, Madison Daily, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the summer of 1997, the University of Missouri-Rolla's (UMR) Engineering Management Department began offering its first completely Web-based course. This graduate level course, Advanced Production Management, was designed to utilize a combination of Web-based tools to create a conducive, yet non-traditional, learning environment for its students. The students in the course did not physically have to attend any lectures and only met for an initial and final class period. The remainder of the course was conducted exclusively via Web-based tools. Accordingly, the Engineering Management Department commenced a research effort to determine the effectiveness of this new learning environment. This …

A Mentoring Guide For Female Faculty In Engineering, Susan L. Murray, Linda M. Manning, Catherine A. Riordan, Elizabeth Cummins, Philip B. Thompson

Engineering Management and Systems Engineering Faculty Research & Creative Works

One widely accepted method for increasing the chances of success of female engineering and science students and faculty alike is to provide access to female role models and mentors. In this article we offer to new female faculty, and to those who would mentor them, an annotated list of text and electronic resources that address most of the most important challenges facing new female faculty in science and engineering.

A Technology Assessment Survey For Web Based Higher Education Programs, Earl A. Evans, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

Advances in communications and computer technology, as well as in human-computer interfaces, have enabled concurrent advances in Web-based education. A number of case studies concerning applications of Web-based education for both distance learning and on-campus programs have been published. Primarily, these studies have focused on individual assessments of the web-based technologies. In contrast, this paper will provide a broad based assessment of applied web-based technology for higher education. This research was conducted via a survey completed by university and college faculty from numerous 4-year institutions. To gain an effective assessment, eleven categories of web-based course delivery tools, such as chatrooms …

Personal Reflections On Psi In Engineering Mechanics, David Haws

Civil Engineering Faculty Publications and Presentations

There seems to be little argument that our students need to be encouraged toward educational selfdirectedness. Yet self-direction must be based on past learning success and present learning readiness. There is at least a potential conflict here: students needs to assume responsibility for their own education, directing it to topics of their own choosing, but their learning must also at least occasionally be directed along a hierarchical path of sequentially dependent learning objectives (which path may not be so obvious to the uninitiated). The Personalized System of Instruction (PSI) seems to enable both of these not-always-compatible goals. PSI allows the …

Design And Design Centers In Engineering Education, Clive L. Dym

All HMC Faculty Publications and Research

This paper is intended to be the opening salvo of the workshop, Computing Futures in Engineering Design (Dym, 1997). Thus, I want to take this privileged moment to ask you to think with me about the role of design in engineering. In particular, I want to reflect upon how design is articulated and how design is taught; about the role of design in engineering education and in the practice of engineering; and about the role that could be played locally and, perhaps, nationally by a center devoted to design education. Because I teach here at Harvey Mudd College (HMC), …

Design And Design Centers In Engineering Education, Clive L. Dym

All HMC Faculty Publications and Research

This paper is intended to be the opening salvo of the workshop, Computing Futures in Engineering Design (Dym, 1997). Thus, I want to take this privileged moment to ask you to think with me about the role of design in engineering. In particular, I want to reflect upon how design is articulated and how design is taught; about the role of design in engineering education and in the practice of engineering; and about the role that could be played locally and, perhaps, nationally by a center devoted to design education. Because I teach here at Harvey Mudd College (HMC), …

Engineering Management And Industrial Engineering: Six One Way, A Half Dozen The Other, Susan L. Murray, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

To some people engineering management (EM) is a specialty within Industrial Engineering (IE), to others EM is broader than IE. Comparing the histories of the two disciplines shows a clear distinction. Both disciplines have their roots in the work of engineering pioneers at the turn of the century. Work in motion and time study, along with other efficiency driven techniques, was the beginning of IE. Both IE and EM can trace their roots to the era of scientific management and the work of the early pioneers. A noted change for IE occurred after World War II when many programs shifted …

Integrating Core Industrial Engineering Courses Through A Manufacturing Case Study, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper presents a summary of research conducted by a team of students from the University of Missouri-Rolla. The manufacturing processes at a local firm were evaluated. The case study illustrates the benefits of applying ergonomic, safety, work measurement, and quality assessment tools together. Additionally this team approach illustrates the importance of educating engineering students to think across course and discipline lines. The paper concludes with generalized recommendations for other educational applications.

An Information Security Education Initiative For Engineering And Computer Science, Shiu-Kai Chin, Cynthia E. Irvine, Deborah Frincke

Electrical Engineering and Computer Science - All Scholarship

This paper puts forward a case for an educational initiative in information security at both the undergraduate and graduate levels. Its focus is on the need for such education, the desired educational outcomes, and how the outcomes may be assessed. A basic thesis of this paper is that the goals, methods, and evaluation techniques of information and computer security are consistent with and supportive of the stated goals of engineering education and the growing movement for outcomes-based assessment in higher education.

Assessment Methods For Virtual Laboratories In Civil Engineering Technology, Carol L. Considine, Vernon W. Lewis Jr.

Engineering Technology Faculty Publications

Old Dominion University has developed an extensive distance learning system that includes 40 remote sites. A majority of the sites are located at community colleges. There are 30 sites in Virginia, three sites in North Carolina, one site in Washington State and one site in Arizona. In addition, there are four sites at Higher Education Centers in Virginia and one site at a local industrial facility. The Civil Engineering Technology curriculum requires three laboratory courses, which are a challenge in the distance learning environment because of the lack of laboratory equipment and computers at the broadcast sites. The three courses …

Applying Informal Cooperative Learning Groups Techniques In The Classroom, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

The application of informal cooperative learning (CL) groups techniques in the courses including operation research, and computer simulation, is discussed. The informal CL activities can be accomplished in small groups consisting of two or three students. It increases student participation and revitalizing passive lecturers. Students work example problems or homework problems in groups.

Development Of A Biologically Based Aerobic Composting Simulation Model, Dennis P. Stombaugh, Sue E. Nokes

Biosystems and Agricultural Engineering Faculty Publications

A relatively simple dynamic model based on microbial process kinetics has been developed for aerobic composting. Differential equations describing microbial, substrate, and oxygen concentrations, as well as moisture and temperature profiles have been derived as a function of vessel size and aeration rate. Microbial biomass growth was described using Monod growth kinetics as a function of degradable substrate concentration, oxygen concentration, moisture content, and compost temperature. Facility and fan operating costs have been included to permit economic optimization of the process. Predicted results demonstrated the ability of the model to quantify and describe the influence of multiple interacting factors (temperature, …

Computer-Aided Instruction In Dynamics: Does It Improve Learning?, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Since 1992, the authors have been developing and testing BEST Dynamics software (Basic Engineering Software for Teaching Dynamics) with the goal of transforming how engineering dynamics is taught at the University of Missouri-Rolla, USA. This paper introduces the "BEST" Dynamics and its classroom implementation, raises questions concerning the cognitive impact of the software, attempts to classify the type of learning environment used in BEST Dynamics, and gives some new directions that are being taken based on the authors'' observations and experiences.

Some Comments On The Crisis In Engineering And Engineering Technology Education, Kenneth G. Merkel

Department of Industrial and Management Systems Engineering: Faculty Publications

The maintenance of a high-quality technological base in the United States is dependent upon adequately funded engineering programs in American colleges and universities. At the current time, many American engineering educators feel that their academic programs are in a state of crisis with respect to adequacy of resources. A number of foundations associated with large American companies (Exxon, IBM, Amoco, and others) have provided funds designed to aid engineering education. Funded programs at the national level have been proposed in Congress. At the present time, the current level of funding is still inadequate. It will take a national technological crisis …

Curriculum In Civil Engineering At The University Of Dar Es Salaam, R. Wagner

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Problem Oriented Teaching, Concept And Implementation, Beat Victor

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Committee For Relations With Industry - Its Role In The Training Of Engineers, A Shayo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Frontal Instruction Or Group Work, Hans Wagner

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Books To Make Electronics Easy, P Mynott

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

The Fate Of The Developing Economies, F Mtalo

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions