Engineering Commons^™

Educating The Professional Engineer Of 2020: The Changing Licensure Requirements, Susan L. Murray, Terri M. Lynch-Caris

Engineering Management and Systems Engineering Faculty Research & Creative Works

Engineering education programs would be well served to align their curricula and program outcomes to the Fundamentals of Engineering (FE) Exam and Professional Engineer (PE) Exam specifications. These exams are required steps in the process of becoming a licensed engineer in most states. NCEES (the National Council of Examiners for Engineering and Surveying) is a national nonprofit organization dedicated to advancing professional licensure for engineers and surveyors. It develops, administers, and scores these examinations used for engineering licensure. Starting in 2011, NCEES held survey-creation meetings with diverse teams to develop a draft survey containing the subjects in each discipline and …

Electronic Flashcards As A Tool To Improve Exam Readiness, Susan L. Murray, Julie Phelps

Engineering Management and Systems Engineering Faculty Research & Creative Works

Many college classes have basic information that must be learned before students can master the more complex application and analysis of advanced ideas in the class. Students often struggle with identifying and learning these facts, terms, and principles. This paper reports on a project that evaluated the use of electronic flashcards in two undergraduate engineering classes. The study materials (online flashcards) were developed in conjunction with the university's Educational Technology Office.

Beyond Jee: Finding Publication Venues To Get Your Message To The ‘Right’ Audience, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

Very few publications exist outlining the different publishing opportunities within engineering education as a discipline. Most researchers think immediately of the Journal of Engineering Education (JEE), and as the primary publication associated with the American Society for Engineering Education it is a logical first thought.

Questions arise with new graduate students and young faculty who are trying to learn the scope of engineering education as a research discipline and need to identify possible publication venues. A broad list of publications has been generated and is maintained by the ASEE Student Division in cooperation with the Center for Engineering Learning and …

Bypassing Roadblocks To Technical Information: Locating Freely Available Technical Information For Entrepreneurs, Anne E. Rauh

Librarian Publications

If you have ever had to seek technical information, you have probably run into an information access roadblock or a pay-wall. This is a major issue for our students as they leave our universities and our subscription resources and move on to become practitioners of their field. This session will outline the different types of freely available technical information - including patents, government funded technical reports, and open access journal literature - and demonstrate how to access them. The session will also give examples of how to integrate these resources into the classroom through design projects and information seeking assignments. …

The Decline Of The Car Enthusiasts: Implications For Undergraduate Engineering Education, Mary P. Cardenas

All HMC Faculty Publications and Research

Hands-on, project-based engineering education is alive and well. However, anecdotal evidence indicates that we are seeing fewer undergraduate engineering students who arrive on campus already knowing how to ‘use their hands’—having familiarity with tools and mechanical devices, knowing how to connect things, savvy about avoiding leaks in fluid systems, wary of stripping a screw thread or shearing a bolt head—the kinds of things that an archetypal car enthusiast would have learned in high school. For design-build-test project-based engineering educational experiences, having at least one car enthusiast has proven invaluable: more time can be spent on testing and re-designing, rather than …

Examining The Effects Of Computational Tools On Students' Conceptual Understanding Of Thermodynamics Of Material Concepts And Representations, Oyindamola Oluwatimi

Open Access Theses

Technology is becoming a more critical agent for supporting learning as well as research in science and engineering. In particular, technology-based tools in the form of simulations and virtual environments support learning using mathematical models and computational methods. The purpose of this research is to: (a) measure the value added in conveying Thermodynamics of materials concepts with a blended learning environment using computational simulation tools with lectures; and (b) characterize students' use of representational forms to convey their conceptual understanding of core concepts within a learning environment that blended Gibbs computational resource and traditional lectures.

A mix-method approach was implemented …

Clarifications Of A Datum Axis Or Centerplane Specifying In Maximum Material Condition Of Geometric Dimensioning And Tolerancing, Cheng Y. Lin, Jennifer G. Michaeli, Mileta Tomovic

Engineering Technology Faculty Publications

Engineering and Engineering Technology students and professionals learning the processes and standards in computer-aided design (CAD) and computer-aided manufacturing (CAM) should learn and understand the methodology of geometric dimensioning and tolerancing (GD&T) to describe the intent and requirements for part and assembly geometries. Correct application of GD&T ensures that the part and assembly geometry defined on the drawing will have the desired form and fit (within limits) and function as intended. One learning difficulty in understanding GD&T is the concept of defining a datum axis or center plane using Maximum Material Condition (MMC). To overcome this difficulty, a new approach …

Elec 2110: Elements Of Electrical Engineering—A Peer Review Of Teaching Project Benchmark Portfolio, Mahmoud Alahmad

UNL Faculty Course Portfolios

I have been teaching this class for the last five years. As an introductory course to electrical engineering, there is a lot of material that needs to be covered. All the material is important and relevant, and I try to go in-depth in each topic area. This approach has resulted in overwhelming the students and made them struggle with the course content, application and utilization. As I consider this course for the peer review, I am evaluating the depth of each topic and the opportunity to adjust the approach and method used to introduce new concepts and at the same …

Designing For Success: Developing Engineers Who Consider Universal Design Principles, Kimberly Edginton Bigelow

Mechanical and Aerospace Engineering Faculty Publications

Engineers must design for a diverse group of potential users of their products; however, engineering curricula rarely include an emphasis on universal design principles. This research article details the effectiveness of a design project implemented in a first-year engineering course in an effort to raise awareness of the need for engineers to be more inclusive when designing. Students were asked to apply universal design principles to redesign an engineering laboratory to make it more usable to all, including individuals with disabilities who use the room. A representative from the university’s disability services staff, as well as individuals with first-hand experience …

Improving Engineering Students’ Design Skills In A Project-Based Learning Course By Addressing Epistemological Issues, Gavin Duffy, Shannon Chance, Brian Bowe

Conference papers

A novice designer is prone to making premature decisions. Rather than explore issues and research information and options, he may quickly jump to posing solutions and view design as a linear, step-by-step process. Instead of testing a variety of ideas, a beginning designer often becomes mesmerized by his initial ideas. An experienced designer, on the other hand, is much more likely conduct research and delay making decisions until the challenge has been fully explored [1]. She uses a variety of techniques to generate ideas, test them, and see how they inter-relate, sees design as an iterative process, has a variety …

The Challenges And Implications For Energy Education, Patrick A. Tebbe

Mechanical and Civil Engineering Department Publications

In March 2011, the Fukushima Daiichi Nuclear Power Station in Japan was hit by twin natural disasters of a 9.0 earthquake and a tsunami more than 10 meters high. The combination forced a shut down of the reactor and severed externally provided power. Backup generators and batteries, which at first functioned normally, were swamped and disabled by the tsunami waters. The subsequent loss of reactor core cooling led to rising temperatures that ultimately resulted in a partial melting of the fuel rods and several hydrogen explosions (produced by a steam-zirconium reaction). Eventually, the situation was brought under control, but not …

A New Assessment Method To Easily Identify Areas Needing Improvement In Course-Level Learning Outcomes, Thomas Knotts, W. Vincent Wilding, William G. Pitt, Morris D. Argyle

Faculty Publications

A New Assessment Method to Easily Identify Areas Needing Improvement Course‐level Learning Outcomes Thomas A. Knotts IV, W. Vincent Wilding, William G. Pitt, and Morris D. Argyle Department of Chemical Engineering, Brigham Young University Assessment of student proficiency in expected outcomes, whether on the course or program level, is an important aspect of curriculum development in engineering programs. The reasons for such assessment range from desires to improve student learning to fulfilling requirements of various accreditation bodies. But regardless of the reasons, the challenge is to develop suitable metrics which can clearly identify areas which need improvement. In order to …

Using Student Ambassadors To Relay Themes From Changing The Conversation In Engineering First Year Seminars, Sarah Rzasa Zappe, Melissa Marshall, Enrique D. Gomez, Esther W. Gomez, Angela D. Lueking

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper describes the efforts at a large mid-Atlantic university to integrate themes from Changing the Conversation into First Year Seminars. Changing the Conversation, a 2008 book by the National Academy of Engineering, found that both male and female students were more attracted to messages describing engineering in terms relating to societal impact, such as the phrases, "Engineering makes a world of difference" and "Engineering is essential to our health, happiness, and safety." Although the research was conducted with younger students, the potential for using these themes in the undergraduate curricula could have the potential to impact persistence in engineering, …

An Inverted Teaching Model For A Mechanics Of Materials Course, Jeffery S. Thomas, Timothy A. Philpot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Instructors at Missouri University of Science and Technology have been offering certain sections of a mechanics of materials course in an inverted format for the past two years. In this format, students learn the concepts outside of class, using a textbook, animations and videos developed by the authors, and work on homework either individually or in groups during the optional class time. Students take eight multiple-choice exams and a final exam that is common to both the inverted sections and the more traditional lecture-based sections. Homework in the inverted sections is assigned but not graded. The in-class exams are given …

First Generation College Students In Engineering: A Grounded Theory Study Of Family Influence On Academic Decision Making, Denise Simmons

All Dissertations

This work develops a constructivist grounded theory describing the influence of family and those that serve a role similar to family on the academic decision making of undergraduate first generation in college (FGC) students majoring in engineering. FGC students, in this study, are students with neither parent having attained a bachelor's degree.
FGC students are an untapped talent pool with the potential to diversify and increase the number of engineers, which are both urgent national priorities. Much is known about FGC students with respect to their academic preparation, transition to postsecondary education, and progress toward degree attainment. However, the literature …

The Engineering Design Process As A Model For Stem Curriculum Design, Krystal Sno Corbett

Doctoral Dissertations

Engaging pedagogics have been proven to be effective in the promotion of deep learning for science, technology, engineering, and mathematics (STEM) students. In many cases, academic institutions have shown a desire to improve education by implementing more engaging techniques in the classroom. The research framework established in this dissertation has been governed by the axiom that students should obtain a deep understanding of fundamental topics while being motivated to learn through engaging techniques. This research lays a foundation for future analysis and modeling of the curriculum design process where specific educational research questions can be considered using standard techniques. Further, …

Future Critical Issues And Problems Facing Technology And Engineering Education In The Commonwealth Of Virginia, Petros Katsioloudis, Johnny J. Moye

STEMPS Faculty Publications

The purpose of this research was to determine the future critical issues and problems facing the K-12 technology and engineering education profession in the Commonwealth of Virginia. This study was based on the Wicklein nationwide studies (1993a, 2005). Even though this study did not exactly replicate the Wicklein studies--since it was limited to the Commonwealth of Virginia--the method and questions used were identical. The modified Delphi research design was used to draw consensus among technology and engineering education experts in the Commonwealth of Virginia. Seventy-five percent of the participants agreed with one another concerning the top five critical problems and …

A Comparative Analysis Of Preferred Learning And Teaching Styles For Engineering, Industrial, And Technology Education Students And Faculty, Petros Katsioloudis, Todd D. Fantz

STEMPS Faculty Publications

No abstract provided.

An Analysis Of The Best Practices Of Cooperative Education In The Us With The Purpose Of Addressing Various Armenian Engineering Education Problems, Sona White

Theses and Dissertations

This research shows that the expansion of cooperative education programs and university-industry partnerships can help to address some of the problems that engineering education in Armenia is facing today. These problems include lack of connections between universities and industry, outdated curricula, shortages of funding for university staff and facilities, and limited success in helping students qualify for job-related demands of the global economy. In order to identify requirements for developing effective cooperative education programs in Armenia, this study analyzes the characteristics and features of highly successful cooperative education programs in the United States that might be applicable to the requirements …

Engineering Leadership, Mike Murphy, Eugene Coyle

Books/Book chapters

By 1921 the American sociologist Thorstein Veblen in his book The Engi-neers and the Price System argued for a technocracy in which the welfare of humanity would be entrusted to the control of the engineers because they alone were competent to understand the complexities of the industrial system and processes and thereby optimize and maximize its output. This chapter sets out to explore the extent to which Veblen’s technocratic leadership thesis has come to pass. We first review the role of the engineer in society and in the context of Europe, the US and China, and examine the influence of …

An Assessment Of Student Perceptions On The Use Of Multiple Engineering Textbook Editions To Reduce Cost To Students, Frank G. Jacobitz, Thomas F. Schubert, Ernest M. Kim

School of Engineering: Faculty Scholarship

No abstract provided.

A Comparative Evaluation Of An Educational Program Designed To Enable Mechanical Engineering Students To Develop Global Competence, Aaron Gerald Ball

Theses and Dissertations

The 'flattening of the world', using Thomas Friedman's phraseology, is driving corporations to increasingly use collaborative engineering processes and global teams to operate on a global scale. Globalization of the traditional university engineering curriculum is necessary to help students prepare to work in a global environment. More scalable and economically sustainable program types are needed to enable the majority of students to obtain a globalized education. The purpose of this research was to determine how effectively a global team- and project-based computer aided engineering course provided learning opportunities that enabled students to develop elements of global competence in comparison to …

A Comparison Study Of Project-Based-Learning In Upper-Division Engineering Education, Ron Ulseth, Bart Johnson, Rebecca Bates

Integrated Engineering Department Publications

A new model for engineering education was launched in January 2010 in northeastern Minnesota. The Iron Range Engineering (IRE) model is a project-based-learning (PBL) methodology that focuses on producing graduates with integrated technical and professional knowledge and competencies. A unique and important element of the IRE model has 100% of IRE student learning taking place in the context of industry projects. Students at IRE are upper-division engineering students who transferred from Minnesota community college lower-division engineering programs. To understand the impact that IRE methodology may have on preparing engineers with the competencies needed for the future workplace, a comparison study …

The Iron Range Engineering Pbl Curriculum: How Students Adapt To And Function Within Pbl, Rose M. Marra, Betsy Palmer, Ron Ulseth, Bart Johnson

Integrated Engineering Department Publications

Iron Range Engineering is a unique complete-PBL curriculum for upper division students. Rather than studying about engineering in traditional engineering courses, IRE students solve complex and ill-structured industry problems in mining, milling, and manufacturing industries. To support students’ transition to PBL and to facilitate deep approaches to learning technical and professional competencies required for the engineers of the future, faculty have created a variety of structures. This paper describes IRE’s PBL implementation and reports the results of a qualitative study of their students.

Longitudinal Evaluation Of A Gis Laboratory In A Transportation Engineering Course, Ghulam H. Bham, Dan Cernusca, Ronaldo Luna, Uday R.R. Manepalli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper focuses on the potential impact of student-centered feedback for enhancing the learning experience of civil engineering students that used a geographic information system (GIS) based tutorial in a transportation engineering course. the tutorial was implemented in a laboratory environment developed as a self-guided activity supported by a web-Based learning system. the formative research proposed in this study includes a series of four successive implementations of this laboratory. Students' performance, beliefs, and perceptions were monitored by using a mixed methods design approach and weaknesses identified from early implementations were addressed before the next implementation of the laboratory activity. the …

Successful Engineering And Technology Student Mobility: Key Student Perspectives And Quality Determinants Before, During And After Student Exchange Under The Atlantis Programme, Mike Murphy, Donal Mchale, Michael Dyrenfurth

Conference papers

In this paper, we describe the lessons learned, and determinants of quality, from two Atlantis programmes. Additionally our two student authors will share key student perspectives relevant to student mobility: (1) before they visited the partner university, (2) while they were studying at the partner university and (3) after they returned to their home university. Purdue University and the Technological University Dublin, together with the Hochschule Darmstadt and Pennsylvania State University, were successful in securing an Atlantis mobility grant [1] for four years to support student and staff mobility between the United States and Europe. The programme has just completed …

A New Model Of Project Based Learning, Ron Ulseth, Jefferey E. Froyd, Thomas A. Lotzinger, Dan Ewert, Bart Johnson

Integrated Engineering Department Publications

A new model for engineering education has been developed and funded. The model is 100% project based learning (PBL) where the students develop their own learning objectives. The projects are authentic needs contributed by collaborating industries. Students monitor the acquisition of 32 technical competencies and all of the design and professionalism competencies required of new practicing engineers. The reasons for the new model, description of the model, research supporting the model, methods for evaluating the model and its transportability are discussed.

Entrepreneurship In The Iron Range Engineering (Ire) Model, Dan Ewert, Ron Ulseth, Bart Johnson, Jeff Wandler, Andrew Lillesve

Integrated Engineering Department Publications

The aim of this paper is to describe a new model for engineering education that has entrepreneurship, in its many form, as a focus. Issues involved with integrating student-based entrepreneurship into the educational process are also described.

Missouri S&T Engineering Management Capstone Senior Design: Lessons Learned And Challenges To Come, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

A more traditional, capstone senior design course was recently added as a requirement for Engineering Management undergraduates in the Engineering Management & Systems Engineering Department at Missouri S&T. The case studies course that had served that purpose was deemed to be insufficient for ABET accreditation purposes by department faculty. The most recent 2008 accreditation visit for the department verified this belief and caused the department to launch the new class earlier than anticipated to prove the class would be taught and that it would meet required standards. Thus, no weaknesses or concerns were noted in this area in the final …

Infusing Engineering Design Into High School Stem Courses, Morgan Hynes, Merredith Portsmore, Emily Dare, Elissa Milto, Chris Rogers, David Hammer, Adam Carberry

Publications

Society is recognizing the need to improve STEM education and introduce engineering design concepts before college. In the recent National Academy of Engineers report, Engineering in K-12 Education: Understanding the Status and Improving the Prospects, the authors suggest that the STEM disciplines not be treated as ―silos‖ and that engineering might serve as a motivating context to integrate the four STEM disciplines (Katehi, Pearson, & Feder, 2009). Recent research has suggested that integrated technology and engineering design curriculum can serve as a positive model for mathematics and science learning and retention (Ortiz, 2010; Wendell, 2011). The Tufts University Center for …