Engineering Commons^™

Processing And Properties Of Multifunctional Two-Dimensional Nanocomposite Based On Single Wall Carbon Nanotubes, Ali M. Al Mafarage

Browse all Theses and Dissertations

Truly single layer (monolayer) films of unmodified zigzag single-walled carbon nanotubes by using the Langmuir-Blodgett (LB) technique have been processed successfully. Measurements of their mechanical and optoelectric properties were achieved. Different theoretical equations were used based on the results obtained from the experimental part to study the properties and structures of the produced material and their composite. The produced films were highly oriented as determined by polarized Raman spectroscopy and as shown by scanning tunneling microscopy (STM). The films have a significant amount of flexibility which makes their behavior similar to rubbery materials. They can also be deposited on different …

Preparation And Characterization Of Porous Pdms For Printed Electronics, Eyad Khalid M. Balbaid

Browse all Theses and Dissertations

Fabricating an elastomeric substrate with internal features could provide a novel structure with distinctive mechanical properties that allow them to stretch, bend and absorb the impact force. To date, polydimethylsiloxane (PDMS) is a great candidate as a substrate for flexible electronic applications, due to easy fabrication, high stability and low cost. In the current thesis, porous PDMS samples are fabricated and characterized based on the particle size and the fusion of salt and sugar treated micro-regions. The liquid PDMS is prepared by mixing the silicon elastomer base (Sylgard 184) and elastomer curing agent using volume ration 10:1. The salt and …

Chondroitin Sulfate Hydrogels For Total Wound Care Devices, Tushar Goswami

Browse all Theses and Dissertations

Chondroitin sulfate (CS) is a naturally occurring bio-polymer found in areas of high cartilage in mammals. In directed applications, such as hydrogels, CS can be used to impact keratinocyte growth cycles. In this work, CS based hydrogels were utilized to accelerate wound healing and, in conjunction with a graphene sensor, monitor wound fluid pH. The hydrogels were cast onto a graphene field effect transistor (GFET) to obtain the benefits of the hydrogel wound healing capabilities, while also utilizing the pH sensitivity of the graphene. Results showed that the hydrogel caused a fivefold increase in cell size over the course of …

A Novel Methodology For Timely Brain Formations Of 3d Spatial Information With Application To Visually Impaired Navigation, Spyridon Manganas

Browse all Theses and Dissertations

Human brain analysis and understanding pose several challenges due to the great complexity of the structural organization and the functional connectivity that characterizes the human brain. The ability of the brain to adapt in dynamic changes over time such as normal aging, neurodegenerative diseases or congenital brain malformations renders the brain’s exploration a particularly demanding and difficult task. In recent years, advances in brain imaging modalities and lately the multimodal fusion, combined with improvements in related technologies have greatly assisted the development of brain maps by providing insights regarding the overall brain structure and functionality. Even though the existence of …

Bs News January/February

Building Services Engineering

No abstract provided.

Adenovirus Co-Opts Neutrophilic Inflammation In Order To Enhance Entry Into Epithelial Cells, James Matthew Readler

Browse all Theses and Dissertations

Human adenoviruses (AdV) are double-stranded DNA viruses that can cause a range of diseases. While AdV respiratory infections are often mild and self-limited, severe manifestations such as fulminant pneumonia and acute respiratory distress syndrome (ARDS) are not uncommon. In order to identify potential modalities to treat AdV infections and potentially enhance the effectiveness of AdV vector delivery, a thorough mechanistic understanding of how AdV enters host cells is needed. Previous studies have revealed polarized epithelia, one of the primary targets for AdV respiratory infections, are highly resistant to AdV entry from the apical (luminal) surface. However, upon exposure to interleukin …

Quantification Of Optical Parameters Using Frequency Domain Functional Near-Infrared Spectroscopy (Fd-Fnirs), Christopher W. Davies

Browse all Theses and Dissertations

Near infrared spectroscopy (NIRS) is a non-invasive technique that uses near-infrared light and hemoglobin as the contrast to characterize tissue optical properties, namely optical absorption [����] and scattering [����′ ]. Through this characterization, it is possible to obtain information about the tissue’s oxygenated (HbO) and deoxygenated (Hb) hemoglobin concentrations and oxygen saturation which are important physiological markers for diagnosis and intervention monitoring. Many commercial devices use a continuous wave approach (CW-fNIRS), a technique that simply relies on intensity changes from a constant power laser to determine only relative changes in oxygenation. This is a significant limitation for clinical settings where …

Rescue Of Als Protein Fus Toxicity By Taf, Elliott Hayden

Browse all Theses and Dissertations

Amyotrophic Lateral Scleroses (ALS) is a neurodegenerative disease characterized by the degeneration of upper and lower motor neurons in the brain and spinal cord leading to progressive paralysis and ultimately death within 5 years of symptom onset. Only two drugs are approved by the Food and Drug Administration (FDA) for treating ALS that slow the disease progression by about 3 months. Mutations in the gene Fused in Sarcoma (FUS) cause inherited forms of ALS. FUS is a nuclear, multifunctional RNA-binding protein (RBP) involved in multiple RNA metabolic pathways. Mutations in FUS cause mislocalization of the protein from the nucleus to …

Improve Operating Room Utilization Through Distributed Scheduling Workflow And Automation, Miteshkumar Mahendrabhai Vasoya

Browse all Theses and Dissertations

Operating room (OR) plays a crucial role in health care, contributing more than 50% of the hospital’s revenue and incurring over 35% of the hospital’s expense, ultimately determining the hospital’s profitability. Moreover, because the OR is a primary source of admissions, it is virtually impossible to streamline hospital‐wide workflow without first streamlining patient flow through the OR. Unfortunately, current OR scheduling practices often limit the utilization of OR, one of the most expensive resources in the health care industry, to around 60%. On the other hand, many patients have to wait an excessively long time before their surgeries can be …

The Characterization And Fatigue Life Impact From Surface Roughness On Structurally Relevant Features Produced Using Additive Manufacturing, Eric-Paul Daniel Tatman

Browse all Theses and Dissertations

Additive manufacturing (AM) produces rough surfaces that are detrimental to the mechanical performance of the part. In this work, downward-facing surfaces were fabricated in alloy 718 using laser powder bed fusion and investigated with surface characterization and axial fatigue testing. Coupons with downward-facing surfaces at 45°, 60°, and 75° and flat axial fatigue bars with as-built and machined holes were built. Both specimens were fabricated with three levels of downskin laser power and the coupons with three levels of downskin laser speed. Surface characterization showed roughness increased as the downward-facing angle decreased. Fatigue testing with digital image correlation showed localized …

Ieee Access Special Section Editorial: Wirelessly Powered Networks, And Technologies, Theofanis P. Raptis, Nuno B. Carvalho, Diego Masotti, Lei Shu, Cong Wang, Yuanyuan Yang

Computer Science Faculty Publications

Wireless Power Transfer (WPT) is, by definition, a process that occurs in any system where electrical energy is transmitted from a power source to a load without the connection of electrical conductors. WPT is the driving technology that will enable the next stage in the current consumer electronics revolution, including battery-less sensors, passive RF identification (RFID), passive wireless sensors, the Internet of Things and 5G, and machine-to-machine solutions. WPT-enabled devices can be powered by harvesting energy from the surroundings, including electromagnetic (EM) energy, leading to a new communication networks paradigm, the Wirelessly Powered Networks.

Sec-Lib: Protecting Scholarly Digital Libraries From Infected Papers Using Active Machine Learning Framework, Nir Nissim, Aviad Cohen, Jian Wu, Andrea Lanzi, Lior Rokach, Yuval Elovici, Lee Giles

Computer Science Faculty Publications

Researchers from academia and the corporate-sector rely on scholarly digital libraries to access articles. Attackers take advantage of innocent users who consider the articles' files safe and thus open PDF-files with little concern. In addition, researchers consider scholarly libraries a reliable, trusted, and untainted corpus of papers. For these reasons, scholarly digital libraries are an attractive-target and inadvertently support the proliferation of cyber-attacks launched via malicious PDF-files. In this study, we present related vulnerabilities and malware distribution approaches that exploit the vulnerabilities of scholarly digital libraries. We evaluated over two-million scholarly papers in the CiteSeerX library and found the library …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …

Infographic: Be A Stem Professional, Christian Pierre, Leroy Long Iii

Publications

Infographic describing top STEM professions.

"Whole-Brained" Engineering Education In Undergraduate Studies At The University Of Dayton, Kylie Moellering

Undergraduate Voices

This inquiry is a case study which explores, explicates, and summarizes the recent shift to “whole-brained” engineering education for undergraduate-level students at the University of Dayton. This case study is primarily structured around the experiences and insights of an interviewee, Dr. Ken Bloemer, who is the Director of the Visioneering Center at the University of Dayton. The Visioneering Center is principally focused on promoting the progress of engineering education at the university. Voices from scholarly literature pertaining to this vision and other undergraduate engineering curricula are then used to reinforce the interviewee’s views and give deeper insight into the various …

2018 Fall Engr333 Project Final Report (Section A), 2018 Fall Engr333 Section A

ENGR 333

Calvin College currently spends 2.35 million dollars on energy every year. Physical Plant is under pressure to reduce the amount of energy that Calvin purchases from the electrical grid since the college is facing many budget constraints. In addition, President Le Roy signed the President’s Carbon Commitment to achieve carbon neutrality by 2057. With this need to save money on energy and reduce the college’s carbon footprint, the objective of this project was to determine the largest possible reduction in Calvin’s annual energy costs given a five-million-dollar investment in renewable energy.

2018 Fall Engr333 Project Final Report (Section B), Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten

ENGR 333

What is the largest possible reduction in Calvin College’s annual energy costs from a $5M initial investment in renewable energy? Renewable energy systems are essential for Calvin College to reduce greenhouse gas emissions and achieve carbon neutrality to meet the Carbon Commitment that President Le Roy signed in December 2017. Also, a significant cost reduction could be a positive result of transitioning to renewable energy sources such as geothermal, wind, solar, and biomass. Four renewable energy sources were studied throughout the semester to determine a feasible renewable energy plan for Calvin with a $5M investment.

Reevaluating The Professionalization Of Engineering Faculty | College Of Engineering, Usu College Of Engineering

College of Engineering News

An engineering education expert is encouraging institutions of higher education to reevaluate the professional experience of engineering faculty, specifically women professors.

2018 Fall Engr333 Poster, Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten, 2018 Fall Engr333 Section A

ENGR 333

• $158k initial investment in Geothermal systems for various Calvin-owned residential buildings
• $3.34M initial investment in solar panels for Calvin’s rooftops
• The overall savings would be $233,850 per year
• Emissions would be reduced by 864 tons of CO2 emissions per year
• The recommended investment would be fully paid back in 11-15 years

2018 Fall Engr333 Seminar Presentation, Rachel Evans, Alex Gross, Daniella Sugijanto, Jake Shaarda

ENGR 333

File for student presentation, given by students in the Fall 2018 class of ENGR333.

Developing Computer Codes For Analyzing Bridge Response Due To Wim Data Truck Loading, Kenneth Patrick Pasley

Graduate Theses and Dissertations

Despite actual truck demographics evolving over the past 30 years, the Arkansas legal loads for bridge posting have not been updated. Custom computer codes were developed.to facilitate comparison between the current Arkansas legal loads for bridge posting and the actual Arkansas truck traffic to ensure that actual reactions are enveloped by the state'. The program, WIMFluence, calculates shear and moment influence lines for a bridge and the resulting shear and moment reactions based on weigh-in-motion data. With supporting scripts, the reactions due to actual Arkansas truck traffic were compared to those due to the current Arkansas legal loads for bridge …

Effect Of Cement Content On Concrete Performance, Caleb Joshua Lebow

Graduate Theses and Dissertations

Of all the traditional concrete materials, portland cement has the greatest impact on mixture cost and the environment. Cement is in many ways the glue holding concrete together (Weiss, 1999), and as such, it plays a major role in fresh and hardened concrete properties. Without the proper range of cement in the mixture, low strength development or excessive shrinkage may occur leading to premature deterioration. The Arkansas Department of Transportation (ARDOT) recognizes two types of concrete for use in bridge construction, Class S and Class S(AE). This paper focuses on the findings from testing of Class S(AE) concrete, short for …

Ncer Assistance Agreement Annual Progress Report For Grant #83582401 - Assessment Of Stormwater Harvesting Via Manage Aquifer Recharge (Mar) To Develop New Water Supplies In The Arid West: The Salt Lake Valley Example, Ryan Dupont, Joan E. Mclean, Richard C. Peralta, Sarah E. Null, Douglas B. Jackson-Smith

Civil and Environmental Engineering Faculty Publications

The goals of the original proposed project remain the same, that is, to test the hypothesis that Managed Aquifer Recharge (MAR) for stormwater harvesting is a technically feasible, socially and environmentally acceptable, economically viable, and legally feasible option for developing new water supplies for arid Western urban ecosystems experiencing increasing population, and climate change pressures on existing water resources. The project is being carried out via three distinct but integrated components that include: 1) Monitoring of existing distributed MAR harvesting schemes involving a growing number of demonstration Green Infrastructure (GI) test sites; 2) Integrated stormwater/vadose zone/groundwater/ ecosystem services modeling; and …

Engineering Success On The Field: A Reflection On The Epics Ironman Pediatric Prosthetic Project, Glynn Gallaway

Purdue Journal of Service-Learning and International Engagement

Glynn Gallaway is a student in the Purdue Mechanical Engineering Class of 2020 with interests in the health care, assistive technology, and medical device industries. Glynn is from Dallas, Texas, and was inspired to pursue this career path through her interactions with youth with special needs. She joined the EPICS Ironman team in the fall of 2016 during her first year at Purdue as a part of the learning community. In this article, she discusses her experiences on the Ironman team creating a pediatric prosthetic for a young local athlete. The goal of the Ironman team is to create a …

Collecting Standards For Scholarship, Organization, Industry, And Innovation, Julia Gelfand, Ibironke Lawal, Jill Powell, Anne Rauh

Librarian Publications

Building on the successful 2017 presentation, A Primer in Science and Engineering Collection Development, this presentation will explore a content type that stumps the engineering librarian and acquisitions librarian alike - standards. Technical standards are documents that establish a uniform practice or process for materials, procedures, and products. Each of us uses standards daily - from USB ports to elevators to lights, automobiles, bridges, standardized train tracks, and much more. Standards are prepared and issued by a professional groups, committees, societies, or governmental agencies, and can influence safety and performance and the role of business and manufacturing.

Four librarians from …

The Development Of A Psychometric Test Aimed At Aligning Students To A Range Of Professional Roles, Darren Brian Carthy, Brian Bowe, Kevin Gaughan

Conference papers

Dublin Institute of Technology (DIT), working as part of the PREFER project, a European commission funded project, have developed a psychometric test in order to better align engineering students to three distinct professional roles within industry. This paper reports on the development process of the test, which took place between February and August of 2018.

Bs News November/December

Building Services Engineering

No abstract provided.

The Future Is Now Science Club, Shane Stan

Honors Program: Expanded Learning Clubs

The Future is Now! What will our planet look like in 10, 20, 50, or even 100 years? Where will we live, what will we eat, how will we travel? Believe it or not, in the coming decades, many ideas that were once science fiction will come through to realization. With this, many of the discoveries and technologies making all of this happen are being developed right now as we go about our daily lives.

In this club, appropriately titled, The Future Is Now Science Club, students will be inspired to think larger about the present world they live in. …

Writing For Engineers, Susan Delamare

Open Educational Resources

No abstract provided.

Open Source Low-Cost Power Monitoring System, Shane W. Oberloier, Joshua M. Pearce

Department of Materials Science and Engineering Publications

This study presents an entirely open-source, low-cost power monitoring system capable of many types of measurements including both loads and supplies such as solar photovoltaic systems. In addition, the system can be fabricated using only open source software and hardware. The design revolves around the Digital Universal Energy Logger (DUEL) Node, which is responsible for reading and properly scaling the voltage and current of a particular load, and then serializing it via an on-board ATTiny85 chip. The configuration of the DUEL node allows for custom sensitivity ranges, and can handle up to 50 A and 300 V. Up to 127 …