Engineering Commons^™

Development Of A Semi-Automated Tobacco Stripping Machine Utilizing String Trimmers, Robert George Sperry

University of Kentucky Master's Theses

Conventional stripping of burley tobacco is labor intensive and typically requires 50 to 75 worker hours per acre (wkr•hr/ac). The goal of the project was to reduce labor by optimizing leaf removal by string trimmer heads using combinations of strings lengths and motor speeds. In tests conducted on a single grade, all leaves outside the grade were removed by hand. Plants were run through the machine for sting lengths of 5, 7 and 9 inches and associated motor speeds which were monitored and recorded. Stripping efficiencies were calculated for each plant and collectively for each set of four plants. The …

Bs News January/February

Building Services Engineering

No abstract provided.

Thermoelectric Properties Of ZnXInYOX+1.5y Films, Otto J. Gregory, Matin Amani

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Ceramic thin film thermocouples are being developed to replace noble metal thermocouples operating within the harsh environments of advanced turbine engines used for power generation and propulsion. Seebeck coefficients as large as 158 V/°C were determined for indium oxide (In₂O₃) at 950°C and 256 V/°C for zinc oxide ZnO at 1250°C relative to platinum reference electrodes. Because these Seebeck coefficients are appreciably larger than those for metallic thermocouples, alloys in the system indium zinc oxide Zn_xIn_yO_x+1.5y were investigated by cosputtering from high purity ZnO and In₂O₃ targets. Thermocouple …

2010 Fall Engr333 Project Final Report, 2010 Fall Engr333

ENGR 333

Calvin College dorms have a chronic issue with wasting energy. The dorms have little insulation, high infiltration rates, and are heated by low efficiency boilers. These existing characteristics combine for a larger required heating load and increased energy usage. The excess heat, due to poor temperature control, is often vented out through the windows whenever students deem necessary. This project will attempt to reduce wasted energy and efficiently distribute heat as needed.

The Thermal Systems Design class of 2010 was challenged with retrofitting the Bolt-Heyns-Timmer (BHT) dorm to decrease energy consumption and improve efficiency. The class was presented with the …

Reliability Of A Lunar Excavator, Amanda Michelle Huff

Mahurin Honors College Capstone Experience/Thesis Projects

Reliability Engineering is a field of engineering that studies the ability of a system (or component of a system) to function properly under specific conditions for a specific period of time; reliability analysis of such a system can take many forms. This thesis presents a quantified reliability study of a system that the author along with a team of Western Kentucky University Engineering students (designated Team ARTEMIS) designed, built, tested, and entered for competition in the Inaugural National Aeronautics and Space Administration (NASA) Lunabotics Mining Competition in May 2010. A detailed quantitative analysis has been completed using both a Failure …

Universal Play Frame Vi, Justin Bazant, Cullen Crackel, Anthony Franceschi

Mechanical Engineering

This design report details the design process utilized by Adaptive Exercise Designs (AED) in creating the sixth design of the Universal Play Frame (UPF). The UPF is an adaptive frame which supports a variety of devices that allows athletes in wheelchairs with limited range of motion to participate in physical activity. The past five frame designs do not meet the needs of the Friday Club due to complications with function and time constraints. To ensure all of Fridays Club's needs were met, the problem was better defined by converting the customer requirements into engineering specifications. The design process our team …

Autonomous Underwater Vehicles As Tools For Deep-Submergence Archaeology, Christopher N. Roman, Ian Roderick Mather

Graduate School of Oceanography Faculty Publications

Marine archaeology beyond the capabilities of scuba divers is a technologically enabled field. The tool suite includes ship-based systems such as towed side-scan sonars and remotely operated vehicles, and more recently free-swimming autonomous underwater vehicles (AUVs). Each of these platforms has various imaging and mapping capabilities appropriate for specific scales and tasks. Broadly speaking, AUVs are becoming effective tools for locating, identifying, and surveying archaeological sites. This paper discusses the role of AUVs in this suite of tools, outlines some specific design criteria necessary to maximize their utility in the field, and presents directions for future developments. Results are presented …

Bs News November/December

Building Services Engineering

No abstract provided.

Exploring The Human Interactivity With A Robot To Obtain The Fundamental Properties Of Materials, William L. Christian

USF Tampa Graduate Theses and Dissertations

This research studies the way in which humans and robots interact with each other. When two humans are working together through a set of robotic devices, do they tend to work together or fight with each other more? In which Cartesian direction do they have the most difficulty? Does fighting drastically affect the performance of the team? Finally, what measures can be taken to promote better cooperation between humans and robots to ultimately allow humans to work just as comfortably with a robotic partner as with a human partner? This research answers these questions and provides an analysis of human-robot …

2010 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2010 ENGR333 project focused on heating and air-conditioning in campus dormitories, which are notoriously leaky and inefficient.

I asked the students “What would it take to retrofit the Bolt-Heyns-Timmer (BHT) dormitory heating and air-conditioning systems in a manner that achieves LEED certification?”

Customer

The customer for this project was Calvin’s VP for finance Henry DeVries.

Evidence Based Evaluation Research In Engineering, Kevin Kelly

Conference papers

An argument for evidence based evaluation of sustainable engineering projects in buildings

Bs News September/October

Building Services Engineering

No abstract provided.

Observer Incorporated Neoclassical Controller Design: A Discrete Perspective, Winston Alexander Baker

Master's Theses (2009 -)

Control theory has generally been divided into two categories, modern control and classical control. Modern control uses state feedback to alter the pole locations of a given system. Classical control uses pre-compensation to alter the zeroes of the system and uses output feedback to adjust the poles to bring stability to the system. The drawback is that the application of classical control techniques can be a lengthy, complicated and iterative design process and in the end, classical control techniques still do not give information about the state of the system. Neoclassical control combines classical control techniques with the state feedback …

Implementation Of Physiologic Pressure Conditions In A Blood Vessel Mimic Bioreactor System, Kevin Mark Okarski

Master's Theses

ABSTRACT

Implementation of Physiologic Pressure Conditions in a Blood Vessel Mimic Bioreactor System

Kevin Mark Okarski

Tissue engineering has traditionally been pursued as a therapeutic science intended for restoring or replacing diseased or damaged biologic tissues or organs. Cal Poly’s Blood Vessel Mimic Laboratory is developing a novel application of tissue engineering as a tool for the preclinical evaluation of intravascular devices. The blood vessel mimic (BVM) system has been previously used to assess the tissue response to deployed stents, but under non-physiologic conditions. Since then, efforts have been made to improve the vessel and bioreactor’s ability to emulate in …

Bs News July/August

Building Services Engineering

No abstract provided.

A Miniature Energy Harvesting Device For Wireless Sensors In Electric Power System, Rashed H. Bhuiyan, Roger A. Dougal, Mohammod Ali

Faculty Publications

A novel energy harvesting device called the energy coupler is proposed which can provide power to small wireless sensors in a power system. The energy coupler when coupled electromagnetically to a nearby current carrying conductor scavenges ac power from the conductor. The proposed energy coupler converts the harvested ac power into dc using a passive voltage multiplier circuit. The design of the energy coupler is such that the dc power obtained is adequate to charge a miniature 1.2-V rechargeable battery. It is demonstrated that the energy coupler is capable of delivering 10 mW of dc power to a 50-Ω load. …

Enhancing Electrical Engineering Technology Capstone Experience, Fernando Rios-Gutierrez, Youakim Kalaani

Electrical & Computer Engineering: Faculty Publications

The College of Science and Technology (COST) at our university (XXX) offers degrees in Mechanical (MET), Civil (CET) and Electrical Engineering Technology (EET). All the Engineering Technology programs are ABET accredited and have been successful in achieving the TAC2000 outcomes. In particular, our Senior Design capstone course (TEET4010/ 4020) is a comprehensive three-credit, two-semester engineering design course, that all engineering majors are required to take as their capstone experience. We view this course as a very important component in the preparation of a trained EET professional. The course emphasizes both hard and soft skills and serves as an emulation of …

Enhancing The Learning Experience In A Multidisciplinary Engineering Technology Course, Rocio Alba-Flores, Youakim G. Al-Kalaani

Electrical & Computer Engineering: Faculty Publications

Rapidly changing technology advances demand the revisions of engineering and technology courses so that they continue to serve students and industry in a relevant way. In a typical engineering technology department, students from different majors are usually required to take an introductory electrical engineering course. Due to the multidisciplinary background of students, such a course has traditionally been a challenge to teach so as to make it interesting and useful to all students. Therefore innovative teaching methods have to be employed in order to accommodate different backgrounds and learning styles.

In our department, a basic electrical engineering course is offered …

Application Of Structured Light Imaging For High Resolution Mapping Of Underwater Archaeological Sites, Chris Roman, Gabrielle Inglis, James Rutter

Graduate School of Oceanography Faculty Publications

This paper presents results from recent work using structured light laser profile imaging to create high resolution bathymetric maps of underwater archaeological sites. Documenting the texture and structure of submerged sites is a difficult task and many applicable acoustic and photographic mapping techniques have recently emerged. This effort was completed to evaluate laser profile imaging in comparison to stereo imaging and high frequency multibeam mapping. A ROV mounted camera and inclined 532 nm sheet laser were used to create profiles of the bottom that were then merged into maps using platform navigation data. These initial results show very promising resolution …

2010 Spring Engr333 Project Final Report, Eric Ledy, Rachel Jelgerhuis, Jasper Gondhi, Michael Gondhi, Steve Brink, John Mantel, Kyle Harvey, Jim Vanleeuwen, Jacob Speelman, Mitch Brummel, Tyler Van Dongen, Nathan Van Heukelum, Lynette Hromada, Jen Meneely, Matthew Brouwer, Marc Eberlein, Steve Demaagd, Tim Opperwall, Andrew Dejong, Joel Love, Alex Boelkins, Amanda Hollinger, Betsy Huyser, Jason Dornbos, Jason Handlogten, Justin Karsten, Matt Milan

ENGR 333

Calvin is developing plans for a new data center to provide business continuity and quick recovery in the event of a disaster. The new data center will not replace the existing data center; rather, it will provide redundancy for the operations of the campus. Because of the energy demands of data centers, there is a worldwide push for energy efficiency. So-called “green data centers” provide the same functionality as a normal data center with reduced energy usage and reduced energy costs. Calvin, like most organizations, must weigh the long-term economic benefits of energy efficiency projects against higher initial cost. The …

An Algorithm And Methodology For Static Response Based Damage Detection In Structural Systems, Augusto Terlaje

All Theses and Dissertations (ETDs)

A damage detection algorithm and procedure is presented in this dissertation that utilizes static response data and Optimality Criterion optimization. Static displacement measurements are used as constraints in the damage detection algorithm that identifies potential areas of damage in structural systems. The research aims to improve upon the master's level research performed by the author. First, the robustness of the algorithm is improved by use of a least squares approximation for determining the Lagrange multipliers that are necessary for optimization. Second, an active parameter selection subroutine is used to improve the accuracy of damage detection in the presence of experimental …

2010 Spring Engr333 Poster 1, Eric Ledy, Rachel Jelgerhuis, Jasper Gondhi, Michael Gondhi, Steve Brink, John Mantel, Kyle Harvey, Jim Venleeuwen, Jacob Speelman, Mitch Brummel, Tyler Van Dongen, Nathan Van Heukelum, Lynette Hromada, Jen Meneely, Matthew Brouwer, Marc Eberlein, Steve Demaagd, Tim Opperwall, Andrew Dejong, Joel Love, Alex Boelkins, Amanda Hollinger, Betsy Huyser, Jason Dornbos, Jason Handlogten, Justin Karsten, Matt Milan

ENGR 333

Calvin is developing plans for a new data center to provide business continuity and quick recovery in the event of a disaster. The new data center will not replace the existing data center; rather, it will provide redundancy for the operations of the campus. This new data center will be placed in the Spoelhof Complex. Because of the energy demands of data centers, there is a worldwide push for energy efficiency. So-called “green data centers” provide the same functionality as a normal data center with reduced energy usage and reduced energy costs. Calvin, like most organizations, must weigh the long-term …

2010 Spring Engr333 Poster 2, Eric Ledy, Rachel Jelgerhuis, Jasper Gondhi, Michael Gondhi, Steve Brink, John Mantel, Kyle Harvey, Jim Vanleeuwen, Jacob Speelman, Mitch Brummel, Tyler Van Dongen, Nathan Van Heukelum, Lynette Hromada, Jen Meneely, Matthew Brouwer, Marc Eberlein, Steve Demaagd, Tim Opperwall, Andrew Dejong, Joel Love, Alex Boelkins, Amanda Hollinger, Betsy Huyser, Jason Dornbos, Jason Handlogten, Justin Karsten, Matt Milan

ENGR 333

The new redundant data center requires that Network Operations Center personnel are able to monitor certain conditions within the data center for the safety of the server equipment. Server equipment will fail if it gets too hot or if the surrounding environment becomes too humid, therefore the baseline instrumentation design must monitor both temperature and humidity in the data center. The system must also be capable of remotely alerting NOC personnel when there is a problem.

Bs News May/June

Building Services Engineering

No abstract provided.

2010 Spring Engr333 Project Seminar Presentation, Eric Ledy, Rachel Jelgerhuis, Jasper Gondhi, Michael Gondhi, Steve Brink, John Mantel, Kyle Harvey, Jim Vanleeuwen, Jacob Speelman, Mitch Brummel, Tyler Van Dongen, Nathan Van Heukelum, Lynette Hromada, Jen Meneely, Matthew Brouwer, Marc Eberlein, Steve Demaagd, Tim Opperwall, Andrew Dejong, Joel Love, Alex Boelkins, Amanda Hollinger, Betsy Huyser, Jason Dornbos, Jason Handlogten, Justin Karsten, Matt Milan

ENGR 333

File for student presentation, given by students in the Spring 2010 class of ENGR333.

Bs News March/April

Building Services Engineering

No abstract provided.

2010 Spring Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Spring 2010 ENGR333 project assessed options for the design of a redundant data center for the Calvin campus.

I asked the students “What would it take to build a redundant data center at Calvin that is 30% more energy efficient than the existing data center?”

Note: Because I was on sabbatical in Fall 2009, ENGR333 was moved to Spring 2010.

Customer

The customer for this project was Calvin’s VP for finance Henry DeVries.

Engineering Professional Development Design For Secondary School Teachers: A Multiple Case Study, Jenny L. Daugherty

Publications

The effectiveness of teachers has been regarded as crucial to the success of standards-based reform (Fishman, Marx, Best, & Tal, 2003). Research, particularly within science and mathematics, has underscored the need for professional development to help teachers understand (a) subject matter, (b) learners and learning, and (c) teaching methods (Loucks-Horsley, 1999). In addition to focusing on teacher professional development, national reform efforts have also emphasized science, technology, engineering, and mathematics (STEM) education (i.e., Rising Above the Gathering Storm, NRC, 2006). While substantial work has been conducted in mathematics and science, the efforts in technology and engineering education are much less …

Engineering Student Outcomes For Infusion Into Technological Literacy Programs: Grades 9-12, Craig Rhodes, Vincent Childress

Publications

In 2004, the National Center for Engineering and Technology Education (NCETE) secured funding from the National Science Foundation (NSF) to infuse engineering design into the schools through technology education. In order to reach this goal the researchers, in cooperation with NCETE, conducted a two phase study to identify outcomes for high-school students studying engineering. The first study (referred to as a Phase I) focused on students who intended to enter an engineering program after high school, answering the question:

What are the engineering student outcomes that prospective engineering students in grades 9 through 12 should know and be able to …

Rotational Relaxation Times Of Individual Compounds With Simulations Of Molecular Asphalt Models, Liqun Zhang, Michael L. Greenfield

Chemical, Biomolecular, and Materials Engineering Faculty Publications

The dynamical properties of a complex system incorporate contributions from the diverse components from which it is constituted. To study this relationship in a multicomponent system, relaxation times based on rotation autocorrelation functions in molecular dynamics simulations were analyzed for molecules in two sets of unmodified and polymer-modified model asphalt/bitumen systems over 298–473 K. The model asphalt systems were proposed previously to approximate the chemical and mechanical properties of real asphalts. Relaxations were modeled using a modified Kaulrausch–Williams–Watts function and were based on the third Legendre polynomial of normal vector time correlation functions for aromatic species asphaltene, polar aromatic, naphthene …